SW6130203_As-Built - Certification_20240116

State Stormwater Permit
Permit No. SW6130203
Family Dollar Store #705283 Spout Springs, North Carolina
Stormwater Permit No. SW6130203
Harnett County
Designer's Certification
James F. Chandler.Jr. , as a duly registered Professional Engineer in the
State of North Carolina, having been authorized to observe (periodically/weekly/ full
time) the construction of the project,
Infiltration Basin for the aforementioned Family Dollar Store
(Project)
for Allied Del,elopment.Inc. (Project Owner) hereby state that, to the
best of my abilities, due care and diligence was used in the observation of the project
construction such that the construction was observed to be built within substantial
compliance and intent of the approved plans and specifications.
The checklist of items on page 2 of this form is included in the Certification.
Noted deviations from approved plans and specification:
SEAL
il
Signature
Registration mber 026466
4)rWri
Date 10-19-14 ��.+`OA'�H�CAR,'',,.
� •' ESS •• �/ ,'
e0F io2:'L-57
Q SEAL •°
R' : 026466
t.' c
,� .'e� •ENE•• •'� ON'°°�
',I ,RE CHPs\-0°s
Page 5 of 6

State Stormwater Permit
Permit No. SW6130203
Certification Requirements:
X 1. The drainage area to the system contains approximately the permitted
acreage.
X 2. The drainage area to the system contains no more than the permitted
amount of built-upon area.
X 3. All the built-upon area associated with the project is graded such that the
runoff drains to the system.
N/A 4. All roof drains are located such that the runoff is directed into the system.
N/A 5. The bypass structure weir elevation is per the approved plan.
N/A g. The bypass structure is located per the approved plans.
N/A 7. A Trash Rack is provided on the bypass structure.
X 8. All slopes are grassed with permanent vegetation.
X 9. Vegetated slopes are no steeper than 3:1.
X 10. The inlets are located per the approved plans and do not cause short-
circuiting of the system.
X 11. The permitted amounts of surface area and/or volume have been
provided.
X 12. All required design depths are provided.
X 13. All required parts of the system are provided.
X 14. The required system dimensions are provided per the approved plans.
cc: NCDENR-DWQ Fayetteville Regional Office
225 Green Street
Systel Building, Suite 714
Fayetteville, NC 28301-5043
Ken Slattum, Harnett County Building Inspections
Page 6 of 6