HomeMy WebLinkAboutSW6100207_Designer's Certification_20231004 State Stormwater Permit
R, a Permit No. SW6100207
CAMP MACKALL- 6 METAL BUILDINGS
Stormwater Permit No. SW6100207
Richmond County
Designer's Certification
I,-1 OORLD '�a G� , as a duly registered VE 0C i iJ in the State of North
Carolina, having been authorized to observe (periodically/ weekly/full time) the construction of the
project,
Camp Mackall —6 Metal Buildings
(Project)
s �"
for rofT 61?Q 6E; P\)V) 'c Oti'WKS(Project Owner) hereby state that, to the best of my abilities,
due care and diligence was used in the observation of the project construction such that the
construction was observed to be built within substantial compliance and intent of the approved plans
and specifications.
The checklist of items on page 2 of this form is included in the Certification.
Noted deviations from approved plans and specification:
SEAL
Signature / SyUV--� �c Gh1 ,
v
Registration Number
Q SEAL
Date `�- l llJ 027857
® amvW,
"'�IIlnpla9i¢60\
DEN —pR
SEP 0 22 7010
L)WQ
Page 5 of 6
State Stormwater Permit
Permit No. SW6100207
Certification Requirements:
1. The drainage area to the system contains approximately the permitted acreage.
V 2. The drainage area to the system contains no more than the permitted amount of built-
upon area.
v 3. All the built-upon area associated with the project is graded such that the runoff drains
to the system.
All roof drains are located such that the runoff is directed into the system.
V 5. The bypass structure weir elevation is per the approved plan.
�6. The bypass structure is located per the approved plans.
�7. A Trash Rack is provided on the bypass structure.
_V/8. All slopes are grassed with permanent vegetation.
L/1�9. Vegetated slopes are no steeper than 3:1. .
10, The inlets are located per the approved plans and do not cause short-circuiting of the
system.
V11. The permitted amounts of surface area and/or volume have been provided.
v 12. All required design depths are provided.
L�/13. All required parts of the system are provided.
14. The required system dimensions are,provided per the approved plans.
Please submit this Designer's Certification to: Fayetteville Regional Office
Surface Water Protection
225 Green Street, Suite 714
Fayetteville, NC 28301
Panes R of R