NCG180098_Inspection Report_20190917

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
S. DANIEL SMITH
Director
Center 190 LLC
Attention: Freddie Carroll
104 1st Street NW
Hildebran, North Carolina 28637
NORTH CAROLINA
Environmental Quality
September 17, 2019
Subject: Compliance Evaluation Inspection
Permit: NCG180000
Certificate of Coverage: NCG180098
Burke County, North Carolina
Dear Mr. Carroll:
Enclosed please find a copy of the Compliance Evaluation Inspection Report for the
inspection I conducted at the subject facility on September 11, 2019.
The report should be self-explanatory; however, should you have any questions
concerning this report, please do not hesitate to contact me at [phone] or by email
at [e-mail].
Sincer
Isaiah Reed, CPSWQ, CEPSCI, MS4CECI
Environmental Specialist
Land Quality Section
Enclosure: Inspection Report
D _EQZ. North Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
Asheville Regional Office 1 2090 U.S. Highway 70 1 Swannanoa, North Carolina 28778
again caa
828.296.4500

Compliance Inspection Report
Permit: NCG180098
SOC:
County: Burke
Region: Asheville
Effective: 10/03/14 Expiration: 08/31/19 Owner: Center 190 LLC
Effective: Expiration: Facility: Adden Furniture
104 1 st St NW
Contact Person: Freddie Carroll Title:
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 09/11/2019 Entry Time: 02:OOPM
Primary Inspector: Isaiah L Reed
Secondary Inspector(s):
Certification:
Hildebran NC 28637
Phone: [phone]
Phone:
Exit Time: 02:30PM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Furniture and Fixtures Stormwater Discharge COC
Facility Status: ❑ Compliant 0 Not Compliant
Question Areas:
Storm Water
(See attachment summary)
Page 1 of 3

permit: NCG180098 Owner- Facility: Center 190 LLC
Inspection Date: 09/11/2019 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
On September 11, 2019 this facility was inspected for compliance. Industrial activity was not observed on site, and no
personnel were available. This facility will be re -inspected on or after October 16, 2019. If the facility will no longer be a
furniture manufacturing facility, the permittee is directed to submit a rescission request as soon as possible.
If you have any questions, please contact this office at [phone]
Page 2 of 3

Permit: NGG180098 Owner- Facility: Center 190 LLC
Inspection Date: 09/11/2019 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Page 3 of 3