SW5190501_Supplement EZ Form_20190716

DRAINAGE AREAS
1
Is this a high density project?
No
2
If so, number of drainage areas/SCMs
1
3
Is all/part of this project subject to previous rule
versions?
No
FORMS LOADED
DRAINAGE AREA INFORMATIONoff-
Entire Site
4
Type of SCM
None, Low Density
5
Total BUA in project (sq ft
328673 sf
6
New BUA on subdivided lots (subject to permitting)
(sq ft
sf
7permitting)
New BUA outside of subdivided lots (subject to
s
79168 sf
8
Offsite -total area (sq ft
9
Offsite BUA (sq ft
10
Breakdown of new BUA outside subdivided lots:
- Parking (sq ft
49780 sf
-Sidewalk (sft
8893 sf
- Roof (sq ft
sf
- Roadway s ft
- Future (sq ft_
- Other, please specify in the comment box
below (sq ft
16700 sf
3795 sf (crushed
stone around
infield
11
New infiltrating permeable pavement on
Isubdivided lots (sq ft
sf
12
New infiltrating permeable pavement outside of
subdivided lots (sq ft
sf
13permitting)
Exisitng BUA that will remain (not subject to
s ft
249505 sf
14
Existing BUA that is already permitted (sq ft
sf
15
Existing BUA that will be removed (sq ft
sf
16
Percent BUA
10%
17
Design storm inches
in
18
Design volume of SCM cu ft
cf
19
Calculation method for design volume
0
ADDITIONAL INFORMATION
20
Please use this space to provide any additional information about the
drainage area(s):
The above informatino was filled out to the greatest extent possible. Please
see page 3 of SWU-101 stormwater application form for Drainage Area
information corresponding to sheets C-105 and C-106 of the drawings
included with this submission. Low Density design was used.