20140957 Ver 2_ACP Drilling Fluid Additives - Roanoke River HDD Crossing_20180821

Staff Review
ID#* Version
20140957 2
Is this project a public transportation project?* Yes
No
Reviewer List: *
(Karen II- Iiggiiirns:eads\Ikalhiggiims
Select Reviewing Office: *
CeMrsll Office ._ [phone]
Submittal Type:*
Application Mtadhirr erAs
Does this project require a request for payment to be sent?
Yes
IN

Piroject SubmittalIDated 8/21/2018
Please note: fields marked with a red asterisk below are required. You will not be able to submit the form until all
mandatory questions are answered.
Project Type:
IINeW IProject
IPre.-Application SubmiUall
More IInformation Response
Other Agency Comments
1For the (Record Only (CourtesyCopy)
INe c IPiroject ,- IPlease dheclk the new Iprojec, type if you are 'trying 'to submit a new project that needs an official)
approval) decision.
IPire.-Appilicatiiorn Siulbirnliffall ,- IPlease check tlhe pre-applliicaflon sulbrmiittall if you just Want feedlbaclk oin your submittall
and do not Ihave the expectaflon that your sulbrmniittall will be considered a complete application requiring a forrmnall
decision.
Loire In -formation IF espoinse ,- IPlease clheclk this type if your are responding to a request for iinfornnatiion from staff
and you Ihave and IIID# and version for tfniis response.
their Agency Comments ,- IPlease clhneclk this if you are sutnrniittiing cominneints on an existing project„
IPirojject Contact In-toirimatiiorn
Name:
Todd IReid
Who is submitting the information?
Email Address:
todid.ir.n.ite~ l(i lis" (
ta . �.�t�irnliirnlia::�irne-,irne;irrly.coirru
IPiroject Irntorrrmatiioin
Existing ID M Existing
20140957 Version:
20170001 (no dashes) v2
Project Name:
Atlantic Coast Pipeline
Is this a public transportation project?
Yeas
IN

Is the project located within a NC DCM Area of Environmental Concern (AEC)?
Yes
No
Unknown
County (ies)
Northampton
County (ies)
Halifax
Please upload all files that need to be submited.
Glick the upload button or drag and drop files here to attach document
III:: Ilf;; IriillIIiiinC III:::::::'IIuiiAdditives ... 5.34MB
Only pdf or kmz files are accepted.
Describe the attachments:
I[ ocu.uirmeinrtatiioin of the composition siitiion «aired Ipiropeirtiies of dirilllliiing fluids and additives (SIDS) for the ACIP IRoanolke River F
cirossiing suabirmiitted by ACIP Geneirall Caonlractoir Sprung Ridge Construictors ( IF C:) and Subcoftractor Southeast
I[ �iiireetiioirnallIDriilllliiin ( IEIDID)..
IBy dhedking the box and signing Ibox Ibelow, II ceirtii�fy that
II Ihave given trine, accurate, and complete information on this foirmr
II agiree that sunbi- niissiiom of this foirirn its a "transactiion" subject to Chapter 66, Airticlle 40 of the INC:, GeineirM tatute�
(the "°U„Urniiffoirm IEIlectroniic Transactiions Act")
II agiree to coinduc t this transaction Iby electronic irneains IpunirsujaM to Cylhapteir 66, Article 40 of the INC; GeinerM
tatautes (the "Urnifoirirn ElectronicTransactions Act");
II urndeirstand that an electronic siiginatuaire Ihas the sai -le Ilegall effect and can The enforced in the sairne way as a
vwiriitten siignatuirer AINID
II intend to electronically sign and subirmiit the online foirirn„"
Signature:
�� Wl
Submittal Date:

_____________________________________________________________________________________
www.southeastdrilling.com

Southeast Directional Drilling
Drilling with Pride and Experience!!!
3117 North Cessna Avenue Casa Grande, Arizona 85122
Phone: [phone] Fax: [phone]

Southeast Directional Drilling

Mud Products – NSF 60 Approved

Safety Data Sheet
Page 1 of 7
1. Identification
1.1. Product identifier
1.2. Relevant identified uses of the substance or mixture and application method
1.3. Details of the supplier of the safety data sheet
Company Name NorthStar Fluid Solutions
P.O. Box 271036
Louisville, Colorado 80027, USA
Emergency
CHEMTREC (USA)[phone]
24 hour Emergency Telephone No.International [phone]
Customer Service: NorthStar Fluid Solutions [phone]
2. Hazard(s) identification
2.1. Classification of the substance or mixture
Not Classified
2.2.Label elements
Not Classified.Contains no hazardous substances.
[Prevention]:Not classified.
[Response]:Not classified.
[Storage]:Not classified.
[Disposal]:Not classified.
3. Composition/information on ingredients
In accordance with paragraph (i) of §1910.1200, the specific chemical identity and/or exact percentage (concentration) of composition has been
withheld as a trade secret.
[1] Substance classified with a health or environmental hazard.
[2] Substance with a workplace exposure limit.
[3] PBT-substance or vPvB-substance.
*The full texts of the phrases are shown in Section 16.
Magma Fiber
SDS Revision Date: 01/01/2017
Substances CAS Number PERCENT (w/w) GHS Classification - US
Mineral Wool 65997-17-3 60 - 100% Not classified
Intended use Lost Circulation
Application Method See Technical Data Sheet.
Product Identity MagmaFiber
Alternate Names Mineral Wool
Safety Data Sheet
Page 2 of 7
4. First aid measures
4.1.Description of first aid measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Eyes In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and
get medical attention if irritation persists.
Skin Wash with soap and water. Get medical attention if irritation persists.
Ingestion Under normal conditions, first aid procedures are not required.
4.2. Most important symptoms and effects, both acute and delayed
No significant hazards expected. May cause mild eye, skin, and respiratory irritation.
5. Fire-fighting measures
5.1. Extinguishing media
All standard fire fighting media.
5.2. Special hazards arising from the substance or mixture
Special Exposure hazards
Not applicable.
5.3. Advice for fire-fighters
Full protective clothing and approved self contained breathing apparatus required for fire fighting personnel.
6. Accidental release measures
6.1.Personal precautions, protective equipment and emergency procedures
Use appropriate protective equipment.Avoid contact with skin, eyes and clothing. Avoid creating and breathing
dust. Ensure adequate ventilation.
See section 8 for additional information.
6.2. Environmental precautions
Prevent from entering sewers, waterways, or low areas.
6.3. Methods and material for containment and cleaning up
Scoop up and remove.
Magma Fiber
SDS Revision Date:01/01/2017
Safety Data Sheet
Page 3 of 7
7. Handling and storage
7.1. Precautions for safe handling
Avoid contact with eyes, skin, or clothing.Avoid creating or inhaling dust. Ensure adequate ventilation. Wash hands
after use. Launder contaminated clothing before reuse. Use appropriate protective equipment.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice.
7.2. Conditions for safe storage, including any incompatibilities
Store in dry location.
7.3. Specific end use(s)
Exposure Scenario No information available.
Other Guidelines No information available.
8. Exposure controls and personal protection
8.1. Control parameters
Exposure
Substances CAS Number OSHA PEL-TWA ACGIH TLV-TWA
Contains no hazardous
substances
NA Not applicable Not applicable
8.2. Exposure controls
Personal Protective
Equipment
If engineering controls and work practices cannot prevent excessive exposures,the
selection and proper use of personal protective equipment should be determined by an
industrial hygienist or other qualified professional based on the specific application of
this product.
Respiratory Not normally needed. But if significant exposures are possible then the following respirator
is recommended: Dust/mist respirator. (N95, P2/P3)
Eyes Wear safety glasses or goggles to protect against exposure.
Skin Normal work gloves and coveralls.
Engineering Controls Use in a well ventilated area.
Other Work Practices Not known.
See section 2 for further details.-[Prevention]:
9. Physical and chemical properties
Appearance Fibers. White to gray
Odor Odorless
Odor threshold No information available
pH No data available
Magma Fiber
SDS Revision Date: 01/01/2017
Safety Data Sheet
Page 4 of 7
Melting point / freezing point No data available
Initial boiling point and boiling range No data available
Flash Point No data available
Evaporation rate (Ether = 1)No data available
Flammability (solid, gas)No data available
Upper/lower flammability or explosive limits No data available
No data available
Vapor pressure (Pa)No data available
Vapor Density No data available
Specific Gravity 2.6
Solubility in Water Insoluble in water
Partition coefficient n-octanol/water (Log Kow)No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity (cSt)No data available
Density (lbs/gal)No data available
9.2. Other information
VOC Content (%)No data available
Bulk Density 12-26 lbs/ft3
10. Stability and reactivity
10.1. Reactivity
Not applicable
10.2. Chemical stability
Stable
10.3. Possibility of hazardous reactions
Will not occur
10.4. Conditions to avoid
None anticipated
10.5. Incompatible materials
Strong acids
10.6. Hazardous decomposition products
Carbon monoxide and carbon dioxide
11. Toxicological information
11.1 Information on toxicological effects
Acute oral toxicity:No data available
Acute dermal toxicity:No data available
Magma Fiber
SDS Revision Date: 01/01/2017
Safety Data Sheet
Page 5 of 7
Acute inhalation toxicity:No data available
Skin corrosion/irritation:May cause mechanical irritation to skin.
Serious eye damage/eye irritation:May cause mechanical irritation to eye.
Respiratory/skin sensitization:No data available to indicate product or components present at greater
than 1%are chronic health hazards.
Mutagenicity:No data available to indicate product or components present at greater
than 1%are chronic health hazards.
Carcinogenicity:No data available to indicate product or components present at greater
than 1%are chronic health hazards.
Reproductive toxicity:No data available to indicate product or components present at greater
than 1%are chronic health hazards.
STOT -single exposure:No known effects.
STOT -repeated exposure:No known effects.
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Contains no hazardous
substances
NA No data available No data available No data available
12. Ecological information
12.1. Toxicity
Ecotoxicity Effects
Substances CAS Number Toxicity to Algae Toxicity to Fish Toxicity to
Microorganisms
Toxicity to Invertebrates
Contains no
hazardous substances
NA No information available No information available No information available No information available
12.2. Persistence and degradability
Substances CAS Number Persistence and Degradability
Contains no hazardous substances NA No information available
12.3. Bioaccumulative potential
Substances CAS Number Log Pow
Contains no hazardous substances NA No information available
12.4. Mobility in soil
No information available
12.5. Results of PBT and vPvB assessment
No information available
Magma Fiber
SDS Revision Date: 01/01/2017
Safety Data Sheet
Page 6 of 7
12.6. Other adverse effects
No information available
13. Disposal considerations
13.1. Waste treatment methods
Disposal Method
Bury in a licensed landfill according to federal, state, and local regulations.
Contaminated Packaging
Follow all applicable national or local regulations.
14. Transport information
DOT (Domestic Surface
Transportation)
IMO / IMDG (Ocean
Transportation)
ICAO/IATA
14.1. UN number Not restricted Not restricted Not restricted
14.2. UN proper shipping
name
Not restricted Not restricted Not restricted
14.3. Transport hazard
class(es)
DOT Hazard Class:Not
applicable
IMDG:Not applicable
Sub Class:Not
applicable
Air Class:Not
applicable
14.4. Packing group Not applicable Not applicable Not applicable
14.5. Environmental hazards
IMDG Not applicable
14.6. Special precautions for user
None
15. Regulatory information
US TSCA Inventory All components listed on inventory or are exempt.
EPA SARA Title III Extremely Not applicable
Hazardous Substances
EPA SARA (311,312) Hazard None
Class
EPA SARA (313) Chemicals This product does not contain a toxic chemical for routine annual "Toxic
Chemical Release Reporting" under Section 313 (40 CFR 372).
EPA CERCLA/Superfund Not applicable
Reportable Spill Quantity
Magma Fiber
SDS Revision Date: 01/01/2017
Safety Data Sheet
Page 7 of 7
EPA RCRA Hazardous Waste If product becomes a waste, it does NOT meet the criteria of a
Classification hazardous waste as defined by the US EPA.
California Proposition 65 All components listed do not apply to the California Proposition 65
Regulation.
MA Right-to-Know Law Does not apply.
NJ Right-to-Know Law Does not apply.
PA Right-to-Know Law Does not apply.
Canadian Regulations
Canadian DSL Inventory All components listed on inventory or are exempt.
16. Other information
This is the first version in the GHS SDS format. Listings of changes from previous versions in other formats
are not applicable.
The information and data herein are believed to be accurate and have been compiled from sources believed to be
reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and
handling of the product in compliance with applicable Federal, State and local law and regulations.NorthStar Fluid
Solutions makes no warranty of any kind, express or implied, concerning the accuracy of completeness of the
information and data herein. The implied warranties of merchantability and fitness for a particular purpose are
specifically excluded.NorthStar Fluid Solutions will not be liable for claims relating to any use of this product.
Emergency Overview:
Risk Classification System:
Flammability
0 Physical
1 0
Health
Special Risk
End of Document
Magma Fiber
SDS Revision Date:01/01/2017
HEALTH 1
FLAMMABILITY 0
PHYSICAL 0
PPE B
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
1 / 14
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
-Trade name SODA SOLVAY® DENSE
-Chemical name Sodium carbonate
-Synonyms Dense Sodium Carbonate/Soda Ash
-Molecular formula Na2CO3
1.2 Relevant identified uses of the substance or mixture and uses advised against
Uses of the Substance / Mixture
-Glass industry
-Detergent
-Chemical industry
-Metallurgy.
-Purifying flue gas
1.3 Details of the supplier of the safety data sheet
Company
SOLVAY CHEMICALS, INC.
3737 Buffalo Speedway,
Suite 800,
Houston, TX 77098
USA
Tel: [phone]
Fax: [phone]
1.4 Emergency telephone
FOR EMERGENCIES INVOLVING A SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT CONTACT: CHEMTREC 800-424-
9300 within the United States and Canada, or 703-527-3887 for international collect calls.
SECTION 2: Hazards identification
Although OSHA has not adopted the environmental portion of the GHS regulations, this document may include information on
environmental effects.
2.1 Classification of the substance or mixture
HCS 2012 (29 CFR 1910.1200)
Eye irritation, Category 2A H319: Causes serious eye irritation.
2.2 Label elements
HCS 2012 (29 CFR 1910.1200)
Pictogram
Signal Word
-Warning
Hazard Statements
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
2 / 14
-H319 Causes serious eye irritation.
Precautionary Statements
Prevention
-P264 Wash skin thoroughly after handling.
-P280 Wear eye protection/ face protection.
Response
-P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
-P337 + P313 If eye irritation persists: Get medical advice/ attention.
2.3 Other hazards which do not result in classification
None identified
SECTION 3: Composition/information on ingredients
3.1 Substance
Hazardous Ingredients and Impurities
Chemical name Identification number
CAS-No.Concentration [%]
Carbonic acid sodium salt (1:2)497-19-8 >= 99
The specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret.
3.2 Mixture
Not applicable, this product is a substance.
SECTION 4: First aid measures
4.1 Description of first-aid measures
In case of inhalation
-Move to fresh air.
-If symptoms persist, call a physician.
In case of skin contact
-Wash off with soap and water.
-If symptoms persist, call a physician.
In case of eye contact
-In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for
at least 15 minutes.
-If eye irritation persists, consult a specialist.
In case of ingestion
-Rinse mouth with water.
-Do NOT induce vomiting.
-If symptoms persist, call a physician or Poison Control Center immediately.
4.2 Most important symptoms and effects, both acute and delayed
In case of inhalation
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
3 / 14
Symptoms
-At high concentrations:
-Cough
Effects
-May cause nose, throat, and lung irritation.
Repeated or prolonged exposure
-Risk of sore throat, nose bleeds
In case of skin contact
Effects
-Prolonged skin contact may cause skin irritation.
In case of eye contact
Symptoms
-Redness
-Lachrymation
-Swelling of tissue
Effects
-Severe eye irritation
In case of ingestion
Symptoms
-Severe irritation
-Nausea
-Abdominal pain
-Vomiting
-Diarrhea
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician
-If accidentally swallowed obtain immediate medical attention.
SECTION 5: Firefighting measures
Flash point Not applicable
Autoignition temperature Not applicable
Flammability / Explosive limit no data available
5.1 Extinguishing media
Suitable extinguishing media
-Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media
-None.
5.2 Special hazards arising from the substance or mixture
Specific hazards during fire fighting
-Not combustible.
Hazardous combustion products:
-none
-Barium oxide
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
4 / 14
-Other hazardous decomposition products may be formed.
5.3 Advice for firefighters
Special protective equipment for fire-fighters
-In the event of fire, wear self-contained breathing apparatus.
-Use personal protective equipment.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel
-Evacuate personnel to safe areas.
-Avoid dust formation.
Advice for emergency responders
-Use personal protective equipment.
-Sweep up to prevent slipping hazard.
6.2 Environmental precautions
-Should not be released into the environment.
-Do not flush into surface water or sanitary sewer system.
-Prevent any mixture with an acid into the sewer/drain (gas formations).
-Local authorities should be advised if significant spillages cannot be contained.
6.3 Methods and materials for containment and cleaning up
-Sweep up and shovel into suitable containers for disposal.
-Keep in properly labeled containers.
-Keep in suitable, closed containers for disposal.
-Treat recovered material as described in the section "Disposal considerations".
6.4 Reference to other sections
-Refer to protective measures listed in sections 7 and 8.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
-Ensure adequate ventilation.
-Minimize dust generation and accumulation.
-Avoid contact with skin and eyes.
-Keep away from incompatible products
Hygiene measures
-Eye wash bottles or eye wash stations in compliance with applicable standards.
-When using do not eat, drink or smoke.
-Wash hands before breaks and at the end of workday.
-Handle in accordance with good industrial hygiene and safety practice.
7.2 Conditions for safe storage, including any incompatibilities
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
5 / 14
Technical measures/Storage conditions
-Store in original container.
-Keep in a dry place.
-Keep in properly labeled containers.
-Keep container closed.
-Keep away from:
-Incompatible products
Packaging material
Suitable material
-Polyethylene
-Woven plastic material.
Unsuitable material
-Material moisture permeable
7.3 Specific end use(s)
-Contact your supplier for additional information
-This grade of the product is not intended for pharmaceutical, feed or food applications.
SECTION 8: Exposure controls/personal protection
Introductory Remarks: These recommendations provide general guidance for handling this product. Because specific work
environments and material handling practices vary, safety procedures should be developed for each intended application. Assistance
with selection, use and maintenance of worker protection equipment is generally available from equipment manufacturers.
8.1 Control parameters
Components with workplace occupational exposure limits
Ingredients Value type Value Basis
Carbonic acid sodium salt (1:2)TWA 10 mg/m3 Solvay Acceptable Exposure Limit
8.2 Exposure controls
Control measures
Engineering measures
-Provide appropriate exhaust ventilation at places where dust is formed.
-Apply technical measures to comply with the occupational exposure limits.
Individual protection measures
Respiratory protection
-Effective dust mask
-In case of insufficient ventilation, wear suitable respiratory equipment.
-Effective dust mask
-Use only respiratory protection that conforms to international/ national standards.
-Use NIOSH approved respiratory protection.
Hand protection
-Take note of the information given by the producer concerning permeability and break through times, and of special
workplace conditions (mechanical strain, duration of contact).
-Wear suitable gloves.
Suitable material
-Neoprene
-Natural Rubber
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
6 / 14
Eye protection
-Safety goggles
Skin and body protection
-Dust impervious protective suit
-Rubber or plastic boots
-Rubber or plastic apron
Hygiene measures
-Eye wash bottles or eye wash stations in compliance with applicable standards.
-When using do not eat, drink or smoke.
-Wash hands before breaks and at the end of workday.
-Handle in accordance with good industrial hygiene and safety practice.
SECTION 9: Physical and chemical properties
Physical and Chemical properties here represent typical properties of this product. Contact the business area using the Product
information phone number in Section 1 for its exact specifications.
9.1 Information on basic physical and chemical properties
Appearance Form: powder
Physical state:solid
Color: white
Particle size: > 125 µm ( 85 - 90 %)
Odor odorless
Odor Threshold no data available
Molecular weight 106 g/mol
pH 11.2 ( 4 g/l) ( 77 °F (25 °C))
11.3 ( 10 g/l) ( 77 °F (25 °C))
pKa: 6.4 - 10.3
Melting point/freezing point Melting point/range: 1564 °F (851 °C)
Initial boiling point and boiling range Boiling point/boiling range: ()
Not applicable
Flash point Not applicable
Evaporation rate (Butylacetate = 1)Not applicable
Flammability (solid, gas)Not applicable
Flammability / Explosive limit Explosiveness:
Not applicable
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
7 / 14
Autoignition temperature Not applicable
Vapor pressure negligible
Vapor density Not applicable
Density Bulk density: 0.97 - 1.10 kg/dm3
Method: Free flow
Relative density 2.53 ( 68 °F (20 °C))
Solubility Water solubility:
71 g/l ( 32 °F (0 °C))
212.5 g/l ( 68 °F (20 °C))
Partition coefficient: n-octanol/water Not applicable
Decomposition temperature > 752 °F (> 400 °C)
Viscosity Viscosity, dynamic : Not applicable
Explosive properties no data available
Oxidizing properties Not considered as oxidizing.
9.2 Other information
no data available
SECTION 10: Stability and reactivity
10.1 Reactivity
-Decomposes by reaction with strong acids.
10.2 Chemical stability
-Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
-no data available
10.4 Conditions to avoid
-Exposure to moisture.
10.5 Incompatible materials
-Finely divided aluminum
10.6 Hazardous decomposition products
-none
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
8 / 14
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
Acute oral toxicity
LD50 : 2,800 mg/kg - Rat , male and female
The product has a low acute toxicity
Unpublished reports
Acute inhalation toxicity
no data available
Acute dermal toxicity
LD50 : > 2,000 mg/kg - Rabbit
Method: according to a standardized method
Not classified as hazardous for acute dermal toxicity according to GHS.
No mortality observed at this concentration.
Unpublished reports
Acute toxicity (other routes of
administration)
no data available
Skin corrosion/irritation
Rabbit
Not classified as irritating to skin
Method: OECD Test Guideline 404
Unpublished reports
Serious eye damage/eye irritation
Rabbit
Irritating to eyes.
Method: according to a standardized method
Unpublished reports
Respiratory or skin sensitization no data available
Mutagenicity
Genotoxicity in vitro
By analogy
Ames test
with metabolic activation
Product is not considered to be genotoxic
Published data
Strain: Escherichia coli
without metabolic activation
negative
Product is not considered to be genotoxic
Published data
Genotoxicity in vivo no data available
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
9 / 14
Carcinogenicity no data available
This product does not contain any ingredient designated as probable or suspected human carcinogens by:
NTP
IARC
OSHA
ACGIH
NTP
IARC
OSHA
ACGIH
Toxicity for reproduction and development
Toxicity to reproduction / fertility no data available
Developmental Toxicity/Teratogenicity
Mouse , female
Application Route: Oral
NOAEL teratogenicity: >= 580 mg/kg
NOAEL maternal: >= 580 mg/kg
Method: according to a standardized method
no embryotoxic or teratogenic effects have been observed
Unpublished reports
STOT
STOT-single exposure
The substance or mixture is not classified as specific target organ toxicant, single
exposure according to GHS criteria.
internal evaluation
STOT-repeated exposure
The substance or mixture is not classified as specific target organ toxicant,
repeated exposure according to GHS criteria.
internal evaluation
Aspiration toxicity no data available
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
10 / 14
SECTION 12: Ecological information
12.1 Toxicity
Aquatic Compartment
Acute toxicity to fish
LC50 - 96 h : 300 mg/l - Lepomis macrochirus (Bluegill sunfish)
static test
Analytical monitoring: no
Method: according to a standardized method
Not harmful to fish (LC/LL50 > 100 mg/L)
Published data
Acute toxicity to daphnia and other aquatic invertebrates.
EC50 - 48 h : 200 - 227 mg/l - Ceriodaphnia dubia (water flea)
semi-static test
Method: according to a standardized method
Not harmful to aquatic invertebrates. (EC/EL50 > 100 mg/L)
Published data
Toxicity to aquatic plants no data available
Toxicity to microorganisms no data available
Chronic toxicity to fish no data available
Chronic toxicity to daphnia and
other aquatic invertebrates.
no data available
Chronic Toxicity to aquatic plants no data available
12.2 Persistence and degradability
Abiotic degradation
Photodegradation
hydrolyzes
Test substance: Water
carbonic acid/bicarbonate/carbonate
acid/base equilibrium as a function of pH
Physical- and photo-chemical
elimination
no data available
Biodegradation
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
11 / 14
Biodegradability
Not applicable, inorganic substance
Degradability assessment
The product is not considered to be rapidly degradable in the environment
12.3 Bioaccumulative potential
Partition coefficient: n-octanol/water no data available
Bioconcentration factor (BCF)
Not applicable, inorganic substance
12.4 Mobility in soil
Adsorption potential (Koc)
Air
Not applicable
Solubility(ies)
Water
Mobility
Water
Soil/sediments
not significant
Known distribution to environmental
compartments
no data available
12.5 Results of PBT and vPvB assessment
Not applicable, inorganic substance
12.6 Other adverse effects no data available
Ecotoxicity assessment
Acute aquatic toxicity
Not harmful to aquatic life (LC/LL50, EC/EL50 > 100 mg/L)
Chronic aquatic toxicity
Not classified due to data which are conclusive although insufficient for
classification.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
12 / 14
Product Disposal
-Contact waste disposal services.
-If recycling is not practicable, dispose of in compliance with local regulations.
-Dilute with plenty of water.
-Neutralize with acid.
-In accordance with local and national regulations.
Waste Code
-RCRA Hazardous Waste (40 CFR 302)
-Hazardous Waste – NO
Advice on cleaning and disposal of packaging
-Where possible recycling is preferred to disposal or incineration.
-Clean container with water.
-Dispose of rinse water in accordance with local and national regulations.
-Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.
SECTION 14: Transport information
DOT
not regulated
TDG
not regulated
NOM
not regulated
IMDG
not regulated

IATA
not regulated
Note: The above regulatory prescriptions are those valid on the date of publication of this sheet. Given the possible evolution of
transportation regulations for hazardous materials, it would be advisable to check their validity with your sales office.
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
13 / 14
SECTION 15: Regulatory information
15.1 Notification status
Inventory Information Status
United States TSCA Inventory -Listed on Inventory
Mexico INSQ (INSQ)-Listed on Inventory
Canadian Domestic Substances List (DSL)-Listed on Inventory
New Zealand. Inventory of Chemical Substances -Listed on Inventory
Australia Inventory of Chemical Substances (AICS)-Listed on Inventory
Japan. CSCL - Inventory of Existing and New Chemical Substances -Listed on Inventory
Korea. Korean Existing Chemicals Inventory (KECI)-Listed on Inventory
China. Inventory of Existing Chemical Substances in China (IECSC)-Listed on Inventory
Philippines Inventory of Chemicals and Chemical Substances (PICCS)-Listed on Inventory
EU. European Registration, Evaluation, Authorisation and Restriction of Chemical
(REACH)
-If product is purchased from Solvay in
Europe it is in compliance with REACH, if
not please contact the supplier.
15.2 Federal Regulations
US. EPA EPCRA SARA Title III
Section 313 Toxic Chemicals (40 CFR 372.65)
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Section 302 Emergency Planning Extremely Hazardous Substance Threshold Planning Quantity (40 CFR 355)
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 302 Emergency Planning Extremely Hazardous Substance Reportable Quantity (40 CFR 355)
This material does not contain any components with a SARA 302 RQ.
Section 304 Emergency Release Notification Reportable Quantity (40 CFR 355)
This material does not contain any components with a section 304 EHS RQ.
US. EPA CERCLA Hazardous Substances and Reportable Quantities (40 CFR 302.4)
This material does not contain any components with a CERCLA RQ.
15.3 State Regulations
US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65)
This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.
This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.
SECTION 16: Other information
NFPA (National Fire Protection Association) - Classification
Health 2 moderate
Flammability 0 minimal
Instability or Reactivity 0 minimal
Special Notices None
SAFETY DATA SHEET
SODA SOLVAY® DENSE
Revision Date 03/16/2017
P00000000753
Version : 1.03 / US ( Z8 )
www.solvay.com
14 / 14
HMIS (Hazardous Materials Identification System (Paint & Coating)) - Classification
Health 2 moderate
Flammability 0 minimal
Reactivity 0 minimal
PPE Determined by User; dependent on local conditions
Further information
-Product evaluated under the US GHS format.
Date Prepared: 03/16/2017
-ACGIH American Conference of Governmental Industrial Hygienists
-OSHA Occupational Safety and Health Administration
-NTP National Toxicology Program
-IARC International Agency for Research on Cancer
-NIOSH National Institute for Occupational Safety and Health
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information, and belief at the date of its
publication. Such information is only given as a guidance to help the user handle, use, process, store, transport, dispose, and release
the product in satisfactory safety conditions and is not to be considered as a warranty or quality specification. It should be used in
conjunction with technical sheets but do not replace them. Thus, the information only relates to the designated specific product and may
not be applicable if such product is used in combination with other materials or in any other manufacturing process, unless otherwise
specifically indicated. It does not release the user from ensuring he is in conformity with all regulations linked to its activity.
Safety Data Sheet
Page 1 of 8
1. Identification
1.1. Product identifier
1.2. Relevant identified uses of the substance or mixture and application method
1.3. Details of the supplier of the safety data sheet
Company Name NorthStar Fluid Solutions
P.O. Box 271036
Louisville, Colorado 80027, USA
Emergency
CHEMTREC (USA)[phone]
24 hour Emergency Telephone No.International [phone]
Customer Service: NorthStar Fluid Solutions [phone]
2. Hazard(s) identification
2.1. Classification of the substance or mixture
May form Combustible Dust
2.2. Label elements
Hazard Pictograms
Signal Word Caution
Hazard Statements May form combustible dust concentrations in air.
Precautionary Statements
[Prevention]:None
[Response]:None
[Storage]:None
[Disposal]:None
2.3 Hazards not otherwise classified
None known
Pac HV
SDS Revision Date: 06/01/2017
Intended use Fluidloss Control
Application Method See Technical Data Sheet.
Product Identity Pac-HV
Alternate Names: Sodium CarboxyMethylCellulose
Contains Substances CAS Number
Polysaccharide/Sodium CarboxyMethylCellulose 9004-32-4

Safety Data Sheet
Page 2 of 8
3. Composition/information on ingredients
4. First aid measures
4.1. Description of first aid measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Eyes In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and
get medical attention if irritation persists.
Skin Wash with soap and water. Get medical attention if irritation persists.
Ingestion Do NOT induce vomiting. Give nothing by mouth. Obtain immediate medical attention.
4.2. Most important symptoms and effects, both acute and delayed
May cause eye and skin irritation.
4.3 Indication of any immediate medical and special treatment needed
Notes to Physician Treat symptomatically.
5. Fire-fighting measures
5.1. Extinguishing media
Water fog, carbon dioxide, foam, dry chemical.
5.2. Special hazards arising from the substance or mixture
Special Exposure Hazards
Decomposition in fire may produce toxic gases. Organic dust in the presence of an ignition source can be explosive in
high concentrations. Good housekeeping practices are required to minimize this potential.
5.3. Advice for fire-fighters
Full protective clothing and approved self-contained breathing apparatus required for fire fighting personnel.
Pac HV
SDS Revision Date: 06/01/2017
Substances CAS Number PERCENT (w/w) GHS Classification - US
In accordance with paragraph (i ) of §1910.1200, the specific chemical identity and/or exact percentage (c oncentration) of composition has been
withheld as a trade secret.
[1] Substance classified with a health or environmental hazard.
[2] Substance with a workplace exposure limit.
[3] PBT-substance or vPvB-substance.
*The full texts of the phrases are shown in Section 16.
Polysaccharide/Sodium CarboxyMethylCellulose 9004-32-4 100% Combustible dust
Safety Data Sheet
Page 3 of 8
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Use appropriate protective equipment. Avoid creating and breathing dust. Slippery when wet. Avoid contact with skin,
eyes and clothing. Ensure adequate ventilation.
See Section 8 for additional information
6.2. Environmental precautions
Prevent from entering sewers, waterways, or low areas.
6.3. Methods and material for containment and cleaning up
Scoop up and remove.
7. Handling and storage
7.1. Precautions for safe handling
Avoid contact with eyes, skin, or clothing. Avoid creating or inhaling dust. Ensure adequate ventilation. Slippery when
wet. Wash hands after use. Launder contaminated clothing before reuse. Use appropriate protective equipment.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice.
7.2. Conditions for safe storage, including any incompatibilities
Store away from oxidizers. Store in a cool, dry location. Product has a shelf life of 36 months.
8. Exposure controls and personal protection
8.1.Occupational Exposure Limits
Substances CAS Number
8.2. Exposure controls
Respiratory Not normally needed. But if significant exposures are possible then the following respirator
selection and proper use of personal protective equipment should be determined by an
industrial hygienist or other qualified professional based on the specific application of this
product.
See section 2 for further details.-[Prevention]:
Pac HV
SDS Revision Date: 06/01/2017
OSHA PEL-TWA ACGIH TLV-TWA
Polysaccharide 9004-32-4 Not applicable Not applicable
is recommended: Dust/mist respirator. (N95, P2/P3)
Eyes Wear safety glasses or goggles to protect against exposure.
Skin Normal work coveralls and gloves.
Engineering Controls Use in a well ventilated area.
Other Work Practices If engineering controls and work practices cannot prevent excessive exposures, the
Safety Data Sheet
Page 4 of 8
9. Physical and chemical properties
Appearance Solid Powder,White to off white
Odor Odorless
Odor threshold No information available
pH 6.5-9 (1%)
Melting point / freezing point No data available
Initial boiling point and boiling range No data available
Flash Point 221 °C / 430 °F
Evaporation rate (Ether = 1)No data available
Flammability (solid, gas)No data available
Upper/lower flammability or explosive limits No data available
Vapor pressure (Pa)No data available
Vapor Density No data available
Specific Gravity 1.6
Solubility in Water Soluble in water
Partition coefficient n-octanol/water (Log Kow)No data available
Auto-ignition temperature 400 °C / 752 °F
Decomposition temperature No data available
Viscosity (cSt)No data available
Bulk Density 40-55 lbs/ft3
9.2. Other information
No data available
10. Stability and reactivity
10.1. Reactivity
Not expected to be reactive.
10.2. Chemical stability
Stable
10.3. Possibility of hazardous reactions
Will not occur
10.4. Conditions to avoid
None anticipated
10.5. Incompatible materials
Strong Oxidizers.
10.6. Hazardous decomposition products
Carbon monoxide and carbon dioxide.
Pac HV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 5 of 8
11. Toxicological information
11.1 Information on likely routes of exposure
Principle Route of Exposure Eye or skin contact, inhalation.
11.2 Symptoms related to the physical, chemical and toxicological characteristics
Acute Toxicity
Inhalation None known
Eye Contact May cause mild eye irritation.
Skin Contact May cause mild skin irritation.
Ingestion None known
Chronic Effects/Carcinogenicity No data available to indicate product or components present at
greater than 0.1% are chronic health hazards.
11.3 Toxicity data
Toxicology data for the components
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Polysaccharide
Substances CAS Number Skin corrosion/irritation
Polysaccharide No information available.
Substances CAS Number Eye damage/irritation
Polysaccharide No information available.
Substances CAS Number Skin Sensitization
Polysaccharide No information available
Substances CAS Number Respiratory Sensitization
Polysaccharide No information available
Substances CAS Number Mutagenic Effects
Polysaccharide No information available
Substances CAS Number Carcinogenic Effects
Polysaccharide No information available.
Substances CAS Number Reproductive toxicity
Polysaccharide No information available
Substances CAS Number STOT -single exposure
Polysaccharide No information available
Pac HV
SDS Revision Date: 06/01/2017
9004-32-4 27000 mg/kg (Rat) 2000 mg/kg (Rabbit) 5800 mg/m3 (Rat) 4h
Safety Data Sheet
Page 6 of 8
Substances CAS Number STOT -repeated exposure
Polysaccharide No information available
Substances CAS Number Aspiration hazard
Polysaccharide No information available
12. Ecological information
12.1. Toxicity
Ecotoxicity Effects
Product Ecotoxicity Data
No data available
Substance Ecotoxicity Data
Substances CAS Number Toxicity to Algae Toxicity to Fish Toxicity to
Microorganisms
Toxicity to Invertebrates
TLM96: 10000 ppm
(Oncorhynchus mykiss)
LC50 (96h)20000 mg/L
(Oncorhynchus mykiss)
No information available EC50 (48h) 1000-3300
mg/L (Crangon
crangon)
12.2. Persistence and degradability
Substances CAS Number Persistence and Degradability
Polysaccharide Proprietary No information available
12.3.Bioaccumulative potential
Substances CAS Number Log Pow
Polysaccharide Proprietary No information available
12.4. Mobility in soil
No information available
12.5. Results of PBT and vPvB assessment
No information available
12.6. Other adverse effects
No information available
13. Disposal considerations
13.1. Waste treatment methods
Disposal Method Disposal should be made in accordance with federal, state, and local regulations.
Contaminated Packaging Follow all applicable national or local regulations.
Pac HV
SDS Revision Date: 06/01/2017
Polysaccharide 9004-32-4 No information
available
Safety Data Sheet
Page 7 of 8
14. Transport information
DOT (Domestic Surface
Transportation)
IMO / IMDG (Ocean
Transportation)
ICAO/IATA
14.1. UN number Not restricted Not restricted Not restricted
14.2. UN proper shipping
name
Not restricted Not restricted Not restricted
14.3. Transport hazard
class(es)
DOT Hazard Class:Not
applicable
IMDG:Not applicable
Sub Class:Not
applicable
Air Class:Not
applicable
14.4. Packing group Not applicable Not applicable Not applicable
14.5. Environmental hazards
IMDG Not applicable
14.6. Special precautions for user
None
15. Regulatory information
US Regulations
US TSCA Inventory All components listed on inventory or are exempt.
EPA SARA Title III Extremely Not applicable
Hazardous Substances
EPA SARA (311,312) Hazard None
Class
EPA SARA (313) Chemicals This product does not contain a toxic chemical for routine annual "Toxic
Chemical Release Reporting" under Section 313 (40 CFR 372).
EPA CERCLA/Superfund Not applicable
Reportable Spill Quantity
EPA RCRA Hazardous Waste If product becomes a waste, it does NOT meet the criteria of a
Classification hazardous waste as defined by the US EPA.
California Proposition 65 The California Proposition 65 regulations apply to this product.
MA Right-to-Know Law One or more components listed.
NJ Right-to-Know Law One or more components listed.
PA Right-to-Know Law One or more components listed.
Canadian Regulations
Canadian DSL Inventory All components listed on inventory or are exempt.
Pac HV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 8 of 8
16. Other information
This is the first version in the GHS SDS format. Listings of changes from previous versions in other formats
are not applicable.
The information and data herein are believed to be accurate and have been compiled from sources believed to be
reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and
handling of the product in compliance with applicable Federal, State and local law and regulations.NorthStar Fluid
Solutions makes no warranty of any kind,express or implied, concerning the accuracy of completeness of the
information and data herein. The implied warranties of merchantability and fitness for a particular purpose are
specifically excluded.NorthStar Fluid Solutions will not be liable for claims relating to any use of this product.
Emergency Overview:
Risk Classification System:
HEALTH 1
FLAMMABILITY 1
PHYSICAL 0
PPE E
Flammability
1 Physical
1 0
Health
Special Risk
End of Document
Pac HV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 1 of 8
1. Identification
1.1. Product identifier
1.2. Relevant identified uses of the substance or mixture and application method
1.3. Details of the supplier of the safety data sheet
Company Name NorthStar Fluid Solutions
P.O. Box 271036
Louisville, Colorado 80027, USA
Emergency
CHEMTREC (USA)[phone]
24 hour Emergency Telephone No.International [phone]
Customer Service: NorthStar Fluid Solutions [phone]
2. Hazard(s) identification
2.1. Classification of the substance or mixture
May form Combustible Dust
2.2. Label elements
Hazard Pictograms
Signal Word Caution
Hazard Statements May form combustible dust concentrations in air.
Precautionary Statements
[Prevention]:None
[Response]:None
[Storage]:None
[Disposal]:None
2.3 Hazards not otherwise classified
None known
Intended use Fluidloss Control
Application Method See Technical Data Sheet.
Contains Substances CAS Number
Polysaccharide/Sodium CarboxyMethylCellulose 9004-32-4

Product Identity Pac-LV
Alternate Names: Sodium CarboxyMethylCellulose
Pac LV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 2 of 8
3. Composition/information on ingredients
4. First aid measures
4.1. Description of first aid measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Eyes In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and
get medical attention if irritation persists.
Skin Wash with soap and water. Get medical attention if irritation persists.
Ingestion Do NOT induce vomiting. Give nothing by mouth. Obtain immediate medical attention.
4.2. Most important symptoms and effects, both acute and delayed
May cause eye and skin irritation.
4.3 Indication of any immediate medical and special treatment needed
Notes to Physician Treat symptomatically.
5. Fire-fighting measures
5.1. Extinguishing media
Water fog, carbon dioxide, foam, dry chemical.
5.2. Special hazards arising from the substance or mixture
Special Exposure Hazards
Decomposition in fire may produce toxic gases. Organic dust in the presence of an ignition source can be explosive in
high concentrations. Good housekeeping practices are required to minimize this potential.
5.3. Advice for fire-fighters
Full protective clothing and approved self-contained breathing apparatus required for fire fighting personnel.
Substances CAS Number PERCENT (w/w) GHS Classification - US
In accordance with paragraph (i ) of §1910.1200, the specific chemical identity and/or exact percentage (c oncentration) of composition has been
withheld as a trade secret.
[1] Substance classified with a health or environmental hazard.
[2] Substance with a workplace exposure limit.
[3] PBT-substance or vPvB-substance.
*The full texts of the phrases are shown in Section 16.
Polysaccharide/Sodium CarboxyMethylCellulose 9004-32-4 100% Combustible dust
Pac LV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 3 of 8
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Use appropriate protective equipment. Avoid creating and breathing dust. Slippery when wet. Avoid contact with skin,
eyes and clothing. Ensure adequate ventilation.
See Section 8 for additional information
6.2. Environmental precautions
Prevent from entering sewers, waterways, or low areas.
6.3. Methods and material for containment and cleaning up
Scoop up and remove.
7. Handling and storage
7.1. Precautions for safe handling
Avoid contact with eyes, skin, or clothing. Avoid creating or inhaling dust. Ensure adequate ventilation. Slippery when
wet. Wash hands after use. Launder contaminated clothing before reuse. Use appropriate protective equipment.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice.
7.2. Conditions for safe storage, including any incompatibilities
Store away from oxidizers. Store in a cool, dry location. Product has a shelf life of 36 months.
8. Exposure controls and personal protection
8.1.Occupational Exposure Limits
Substances CAS Number
8.2. Exposure controls
Respiratory Not normally needed. But if significant exposures are possible then the following respirator
selection and proper use of personal protective equipment should be determined by an
industrial hygienist or other qualified professional based on the specific application of this
product.
See section 2 for further details.-[Prevention]:
OSHA PEL-TWA ACGIH TLV-TWA
Polysaccharide 9004-32-4 Not applicable Not applicable
is recommended: Dust/mist respirator. (N95, P2/P3)
Eyes Wear safety glasses or goggles to protect against exposure.
Skin Normal work coveralls and gloves.
Engineering Controls Use in a well ventilated area.
Other Work Practices If engineering controls and work practices cannot prevent excessive exposures, the
Pac LV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 4 of 8
9. Physical and chemical properties
Appearance Solid Powder,White to off white
Odor Odorless
Odor threshold No information available
pH 6.5-9 (1%)
Melting point / freezing point No data available
Initial boiling point and boiling range No data available
Flash Point 221 °C / 430 °F
Evaporation rate (Ether = 1)No data available
Flammability (solid, gas)No data available
Upper/lower flammability or explosive limits No data available
Vapor pressure (Pa)No data available
Vapor Density No data available
Specific Gravity 1.6
Solubility in Water Soluble in water
Partition coefficient n-octanol/water (Log Kow)No data available
Auto-ignition temperature 400 °C / 752 °F
Decomposition temperature No data available
Viscosity (cSt)No data available
Bulk Density 40-55 lbs/ft3
9.2. Other information
No data available
10. Stability and reactivity
10.1. Reactivity
Not expected to be reactive.
10.2. Chemical stability
Stable
10.3. Possibility of hazardous reactions
Will not occur
10.4. Conditions to avoid
None anticipated
10.5. Incompatible materials
Strong Oxidizers.
10.6. Hazardous decomposition products
Carbon monoxide and carbon dioxide.
Pac LV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 5 of 8
11. Toxicological information
11.1 Information on likely routes of exposure
Principle Route of Exposure Eye or skin contact, inhalation.
11.2 Symptoms related to the physical, chemical and toxicological characteristics
Acute Toxicity
Inhalation None known
Eye Contact May cause mild eye irritation.
Skin Contact May cause mild skin irritation.
Ingestion None known
Chronic Effects/Carcinogenicity No data available to indicate product or components present at
greater than 0.1% are chronic health hazards.
11.3 Toxicity data
Toxicology data for the components
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Polysaccharide
Substances CAS Number Skin corrosion/irritation
Polysaccharide No information available.
Substances CAS Number Eye damage/irritation
Polysaccharide No information available.
Substances CAS Number Skin Sensitization
Polysaccharide No information available
Substances CAS Number Respiratory Sensitization
Polysaccharide No information available
Substances CAS Number Mutagenic Effects
Polysaccharide No information available
Substances CAS Number Carcinogenic Effects
Polysaccharide No information available.
Substances CAS Number Reproductive toxicity
Polysaccharide No information available
Substances CAS Number STOT -single exposure
Polysaccharide No information available
9004-32-4 27000 mg/kg (Rat) 2000 mg/kg (Rabbit) 5800 mg/m3 (Rat) 4h
Pac LV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 6 of 8
Substances CAS Number STOT -repeated exposure
Polysaccharide No information available
Substances CAS Number Aspiration hazard
Polysaccharide No information available
12. Ecological information
12.1. Toxicity
Ecotoxicity Effects
Product Ecotoxicity Data
No data available
Substance Ecotoxicity Data
Substances CAS Number Toxicity to Algae Toxicity to Fish Toxicity to
Microorganisms
Toxicity to Invertebrates
TLM96: 10000 ppm
(Oncorhynchus mykiss)
LC50 (96h)20000 mg/L
(Oncorhynchus mykiss)
No information available EC50 (48h) 1000-3300
mg/L (Crangon
crangon)
12.2. Persistence and degradability
Substances CAS Number Persistence and Degradability
Polysaccharide Proprietary No information available
12.3.Bioaccumulative potential
Substances CAS Number Log Pow
Polysaccharide Proprietary No information available
12.4. Mobility in soil
No information available
12.5. Results of PBT and vPvB assessment
No information available
12.6. Other adverse effects
No information available
13. Disposal considerations
13.1. Waste treatment methods
Disposal Method Disposal should be made in accordance with federal, state, and local regulations.
Contaminated Packaging Follow all applicable national or local regulations.
Polysaccharide 9004-32-4 No information
available
Pac LV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 7 of 8
14. Transport information
DOT (Domestic Surface
Transportation)
IMO / IMDG (Ocean
Transportation)
ICAO/IATA
14.1. UN number Not restricted Not restricted Not restricted
14.2. UN proper shipping
name
Not restricted Not restricted Not restricted
14.3. Transport hazard
class(es)
DOT Hazard Class:Not
applicable
IMDG:Not applicable
Sub Class:Not
applicable
Air Class:Not
applicable
14.4. Packing group Not applicable Not applicable Not applicable
14.5. Environmental hazards
IMDG Not applicable
14.6. Special precautions for user
None
15. Regulatory information
US Regulations
US TSCA Inventory All components listed on inventory or are exempt.
EPA SARA Title III Extremely Not applicable
Hazardous Substances
EPA SARA (311,312) Hazard None
Class
EPA SARA (313) Chemicals This product does not contain a toxic chemical for routine annual "Toxic
Chemical Release Reporting" under Section 313 (40 CFR 372).
EPA CERCLA/Superfund Not applicable
Reportable Spill Quantity
EPA RCRA Hazardous Waste If product becomes a waste, it does NOT meet the criteria of a
Classification hazardous waste as defined by the US EPA.
California Proposition 65 The California Proposition 65 regulations apply to this product.
MA Right-to-Know Law One or more components listed.
NJ Right-to-Know Law One or more components listed.
PA Right-to-Know Law One or more components listed.
Canadian Regulations
Canadian DSL Inventory All components listed on inventory or are exempt.
Pac LV
SDS Revision Date: 06/01/2017
Safety Data Sheet
Page 8 of 8
16. Other information
This is the first version in the GHS SDS format. Listings of changes from previous versions in other formats
are not applicable.
The information and data herein are believed to be accurate and have been compiled from sources believed to be
reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and
handling of the product in compliance with applicable Federal, State and local law and regulations.NorthStar Fluid
Solutions makes no warranty of any kind,express or implied, concerning the accuracy of completeness of the
information and data herein. The implied warranties of merchantability and fitness for a particular purpose are
specifically excluded.NorthStar Fluid Solutions will not be liable for claims relating to any use of this product.
Emergency Overview:
Risk Classification System:
HEALTH 1
FLAMMABILITY 1
PHYSICAL 0
PPE E
Flammability
1 Physical
1 0
Health
Special Risk
End of Document
Pac LV
SDS Revision Date: 06/01/2017
SAFETY DATA SHEET
1. Identification
SUPER GEL-X®Product identifier
None.Other means of identification
Not available.Recommended use
Workers (and your customers or users in the case of resale) should be informed of the potential
presence of respirable dust and respirable crystalline silica as well as their potential hazards.
Appropriate training in the proper use and handling of this material should be provided as required
under applicable regulations.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
CETCO, an MTI Company
Address 2870 Forbs Avenue
Company name
Website
Telephone General Information 800 527-9948
Emergency phone number .
E-mail
United States
http://www.cetco.com/
[e-mail]
Hoffman Estates, IL 60192
1.866.519.4752 (US, Canada, Mexico) 1 760 476 3962 Access Code 333562Americas
2. Hazard(s) identification
Not classified.Physical hazards
Not classified.Health hazards
Not classified.Environmental hazards
Not classified.OSHA defined hazards
Label elements
None.Hazard symbol
Signal word None.
Hazard statement Not applicable.
Precautionary statement
Prevention Observe good industrial hygiene practices.
Response Wash hands after handling.
Storage Store away from incompatible materials.
Disposal Dispose of waste and residues in accordance with local authority requirements.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information Not applicable.
3. Composition/information on ingredients
Mixtures
CAS number %Common name and synonymsChemical name
< 0.1
1 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Bentonite Extender Proprietary*
Other components below reportable levels 90 - 100
Constituents
Chemical name CAS number %
CALCIUM CARBONATE 471-34-1
SMECTITE GROUP MINERALS/BENTONITE 1302-78-9
Constituents
CAS number %Chemical name
QUARTZ 14808-60-7 <= 8
CRISTOBALITE 14464-46-1 <= 2
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. Bentonite is a
UVCB substance sub-type 4. The purity of the product is 100 % w/w. Bentonite is composed mainly of smectite group minerals but the
composition is varied, as expected for a UVCB substance, and other mineral constituents will be present in small and varying
amounts. These minor constituents are not relevant for classification and labelling.
Occupational Exposure Limits for constituents are listed in Section 8. The purity of the product is
100% w/w. Impurities are not applicable for a UVCB substance.
Composition comments
4. First-aid measures
If dust from the material is inhaled, remove the affected person immediately to fresh air. Call a
physician if symptoms develop or persist. No specific first aid measures noted.
Inhalation
No specific first aid measures noted. Get medical attention if irritation develops and persists. Wash
skin with soap and water.
Skin contact
No specific first aid measures noted.Eye contact
No specific first aid measures noted. Rinse mouth thoroughly. Get medical attention if any
discomfort occurs.
Ingestion
Dust in the eyes will cause irritation.Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically.Indication of immediate
medical attention and special
treatment needed
No hazards which require special first aid measures. Provide general supportive measures and
treat symptomatically.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Use any media suitable for the
surrounding fires.
Suitable extinguishing media
Not applicable, non-combustible.Unsuitable extinguishing
media
None known. The product itself does not burn.Specific hazards arising from
the chemical
Material can be slippery when wet.Special protective equipment
and precautions for firefighters
In the event of fire, cool tanks with water spray. Material can be slippery when wet.Fire fighting
equipment/instructions
Cool containers exposed to flames with water until well after the fire is out.Specific methods
No unusual fire or explosion hazards noted. This material will not burn.General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Material can be slippery when wet. Use a NIOSH/MSHA
approved respirator if there is a risk of exposure to dust/fume at levels exceeding the exposure
limits. Avoid inhalation of dust from the spilled material. For personal protection, see section 8 of
the SDS. No special precautions are necessary beyond normal good hygiene practices. See
Section 8 for additional personal protection advice when handling this product.
Personal precautions,
protective equipment and
emergency procedures
If sweeping of a contaminated area is necessary use a dust suppressant agent which does not
react with the product. Sweep up or vacuum up spillage and collect in suitable container for
disposal. Collect dust using a vacuum cleaner equipped with HEPA filter. Minimize dust generation
and accumulation. Avoid the generation of dusts during clean-up. Following product recovery, flush
area with water. For waste disposal, see section 13 of the SDS. Collect powder using special dust
vacuum cleaner with particle filter or carefully sweep into closed container.
Methods and materials for
containment and cleaning up
Prevent further leakage or spillage if safe to do so. No special environmental precautions required.Environmental precautions
7. Handling and storage
Minimize dust generation and accumulation. Provide appropriate exhaust ventilation at places
where dust is formed. Avoid breathing dust. Avoid contact with skin and eyes. In case of
insufficient ventilation, wear suitable respiratory equipment. Practice good housekeeping.
Precautions for safe handling
2 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
No special restrictions on storage with other products. Store in a dry area. Store in original tightly
closed container. Keep the container dry. Store in a well-ventilated place. Store away from
incompatible materials (see Section 10 of the SDS). Guard against dust accumulation of this
material.
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
ValueConstituents FormType
PEL 5 mg/m3 Respirable fraction.INERT OR NUISANCE
DUSTS
15 mg/m3 Total dust.
US. OSHA Table Z-3 (29 CFR 1910.1000)
ValueConstituents FormType
TWA 5 mg/m3 Respirable fraction.INERT OR NUISANCE
DUSTS
15 mg/m3 Total dust.
50 mppcf Total dust.
15 mppcf Respirable fraction.
US. ACGIH Threshold Limit Values
ValueComponents Type
TWA 2 ppmTRADE SECRET
US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents Type
TWA 6 mg/m3TRADE SECRET
2 ppm
No biological exposure limits noted for the ingredient(s).Biological limit values
Exposure guidelines
US - California OELs: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
US - Tennessee OELs: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
US ACGIH Threshold Limit Values: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
US NIOSH Pocket Guide to Chemical Hazards: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
Ventilation should be sufficient to effectively remove and prevent buildup of any dusts or fumes
that may be generated during handling or thermal processing. If engineering measures are not
sufficient to maintain concentrations of dust particulates below the OEL, suitable respiratory
protection must be worn.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Use tight fitting goggles if dust is generated. Wear dust-resistant safety goggles where there is
danger of eye contact.
Eye/face protection
Skin protection
No protection is ordinarily required under normal conditions of use.Hand protection
Normal work clothing (long sleeved shirts and long pants) is recommended.Other
Use a NIOSH/MSHA approved respirator if there is a risk of exposure to dust/fume at levels
exceeding the exposure limits.
Respiratory protection
Not applicable.Thermal hazards
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants. Use good industrial hygiene practices in handling this
material.
General hygiene
considerations
9. Physical and chemical properties
Lump, granular or fine powder.Appearance
Solid.Physical state
3 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Powder. Various.Form
Various.Color
None.Odor
Odor threshold Not applicable.
pH 8.5 - 11
Melting point/freezing point > 842 °F (> 450 °C) / Not applicable.
Initial boiling point and boiling
range
Not applicable.
Flash point Not applicable.
Evaporation rate Not available.
This product is not flammable.Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not applicable.
Flammability limit - upper
(%)
Not applicable.
Explosive limit - lower (%)Not available.
Explosive limit - upper (%)Not available.
Vapor pressure Not applicable.
Vapor density Not applicable.
Relative density 2.6 g/cm³
Solubility(ies)
Solubility (water)< 0.9 mg/l
Partition coefficient
(n-octanol/water)
Not applicable.
Not applicable.
Auto-ignition temperature Not applicable.
Decomposition temperature > 932 °F (> 500 °C)
Viscosity Not applicable.
Viscosity temperature Not applicable.
Other information
Bulk density 0.9 - 1.4 g/cm³
Explosive limit Not applicable.
Not explosiveExplosive properties
Explosivity Not applicable.
Flame extension Not applicable.
Flammability Not applicable.
Flammability (flash back)Not applicable.
Flammability (Heat of
combustion)
Not applicable.
Flammability (Train fire)Not applicable.
Flammability class Not applicable.
Flash point class Not flammable
Molecular formula UVCB Substance
Molecular weight Not applicable.
None.Oxidizing properties
Percent volatile 0 %
pH in aqueous solution 8.5 - 11
Specific gravity Not applicable.
VOC (Weight %)CARB
0 %
4 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
10. Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity
Stable at normal conditions.Chemical stability
Will not occur.Possibility of hazardous
reactions
Moisture. Avoid temperatures exceeding the decomposition temperature. Contact with
incompatible materials. Avoid dispersal of dust in the air (i.e., clearing dust surfaces with
compressed air).
Conditions to avoid
None known.Incompatible materials
None.Hazardous decomposition
products
11. Toxicological information
Information on likely routes of exposure
Inhalation Inhalation of dusts may cause respiratory irritation.
Skin contact Not classified.
Eye contact Dust in the eyes will cause irritation.
Ingestion Not classified.
Symptoms related to the
physical, chemical and
toxicological characteristics
None known.
Information on toxicological effects
Test ResultsProduct Species
Bentonite
Inhalation
Acute
LC50 Rat > 5.27 mg/l, 4 hr OECD 436
Dust
Oral
LD50 Rat > 2000 mg/kg OECD 425
Dust
Test ResultsComponents Species
TRADE SECRET
Inhalation
Acute
LC50 Rat 10600 mg/l/4h
1200 mg/l, 4 Hours
Oral
LD50 Mouse 2400 mg/kg
* Estimates for product may be based on additional component data not shown.
Rat 33.5 mg/kg
Not classified.Skin corrosion/irritation
Dust in the eyes will cause irritation. Mild irritant to eyes (according to the modified Kay & Calandra
criteria)
Serious eye damage/eye
irritation
Respiratory or skin sensitization
Respiratory sensitization Not classified.
Not classified.Skin sensitization
Not classified.Germ cell mutagenicity
5 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Carcinogenicity In June 2003, SCOEL (the EU Scientific Committee on Occupational Exposure Limits) concluded
that the main effect in humans of the inhalation of respirable crystalline silica dust is silicosis.
"There is sufficient information to conclude that the relative risk of lung cancer is increased in
persons with silicosis (and, apparently, not in employees without silicosis exposed to silica dust in
quarries and in the ceramic industry). Therefore, preventing the onset of silicosis will also reduce
the cancer risk..." (SCOEL SUM Doc 94-final, June 2003) According to the current state of the art,
worker protection against silicosis can be consistently assured by respecting the existing
regulatory occupational exposure limits. Occupational exposure to respirable dust and respirable
crystalline silica should be monitored and controlled. No carcinogenicity data available for this
product. Sepiolite was evaluated by IARC as class 3 ("Cannot be classified as to carcinogenicity
to humans"). Based on read-across with sepiolite, bentonite was assessed as non-carcinogenic.
Therefore classification of bentonite for carcinogenicity is not warranted.
IARC Monographs. Overall Evaluation of Carcinogenicity
TRADE SECRET (CAS Proprietary) 3 Not classifiable as to carcinogenicity to humans.
Not classified.Reproductive toxicity
Specific target organ toxicity -
single exposure
Not classified.
Specific target organ toxicity -
repeated exposure
Not classified.
Aspiration hazard Not available.
12. Ecological information
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Ecotoxicity
Product Test ResultsSpecies
Bentonite
Aquatic
EC50Algae > 100 mg/l, 72 hoursFreshwater algae
EC50Crustacea 24.8 mg/l, 96 hoursCoon stripe shrimp (Pandalus danae)
> 100 mg/l, 48 hoursDaphnia
81.6 mg/l, 96 hoursDungeness or edible crab (Cancer
magister)
LC50Fish 16000 mg/l, 96 hoursFreshwater fish
2800 - 3200 mg/l, 24 hoursMarine water fish
Components Test ResultsSpecies
TRADE SECRET
Aquatic
EC50Crustacea 47 mg/L, 48 HoursDaphnia
* Estimates for product may be based on additional component data not shown.
LC50Fish 222 mg/L, 96 HoursFish
Not relevant for inorganic substancesPersistence and degradability
Will not bio-accumulate.Bioaccumulative potential
Partition coefficient n-octanol / water (log Kow)
TRADE SECRET 0.35
Bentonite is almost insoluble and thus presents a low mobility in most soils.Mobility in soil
The product has poor water-solubility.Mobility in general
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in
accordance with all applicable regulations.
Disposal instructions
Dispose in accordance with all applicable regulations.Local disposal regulations
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Hazardous waste code
6 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Waste from residues / unused
products
Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Store containers and offer for recycling of material when in accordance with the local
regulations.
Contaminated packaging
14. Transport information
DOT
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Not applicable.Transport in bulk according to
Annex II of MARPOL 73/78 and
the IBC Code
15. Regulatory information
US federal regulations
CERCLA Hazardous Substance List (40 CFR 302.4)
TRADE SECRET (CAS Proprietary) Listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Immediate Hazard - No
Delayed Hazard - No
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
Hazard categories
SARA 302 Extremely hazardous substance
Not listed.
NoSARA 311/312 Hazardous
chemical
SARA 313 (TRI reporting)
Not regulated.
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
TRADE SECRET (CAS Proprietary)
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Not regulated.Safe Drinking Water Act
(SDWA)
Total food additive
Direct food additive
GRAS food additive
Food and Drug
Administration (FDA)
US state regulations
US - New Jersey RTK - Substances: Listed substance
TRADE SECRET (CAS Proprietary)
US - Pennsylvania RTK - Hazardous Substances: Listed substance
TRADE SECRET (CAS Proprietary)
US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100)
Not listed.
US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd.
(a))
TRADE SECRET (CAS Proprietary)
US. Massachusetts RTK - Substance List
TRADE SECRET (CAS Proprietary)
7 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
US. New Jersey Worker and Community Right-to-Know Act
TRADE SECRET (CAS Proprietary)
US. Pennsylvania Worker and Community Right-to-Know Law
TRADE SECRET (CAS Proprietary)
US. Rhode Island RTK
TRADE SECRET (CAS Proprietary)
US. California Proposition 65
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain
any chemicals currently listed as carcinogens or reproductive toxins.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
YesAustralia Australian Inventory of Chemical Substances (AICS)
YesCanada Domestic Substances List (DSL)
NoCanada Non-Domestic Substances List (NDSL)
YesChina Inventory of Existing Chemical Substances in China (IECSC)
NoEurope European Inventory of Existing Commercial Chemical
Substances (EINECS)
NoEurope European List of Notified Chemical Substances (ELINCS)
NoJapan Inventory of Existing and New Chemical Substances (ENCS)
YesKorea Existing Chemicals List (ECL)
YesNew Zealand New Zealand Inventory
YesPhilippines Philippine Inventory of Chemicals and Chemical Substances
(PICCS)
YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
10-October-2013Issue date
24-July-2015Revision date
Version #20
This safety datasheet only contains information relating to safety and does not replace any product
information or product specification.
UVCB = a substance of Unknown or Variable composition, Complex reaction products or
Biological materials
SWERF = Size Weighted Respirable Fraction methodology is a scientific method developed to
quantify the content of respirable particles within a bulk product. All details about the SWERF
method are available at www.crystallinesilica.eu.
HMIS® is a registered trade and service mark of the NPCA.
Further information
Health: 1
Flammability: 0
Physical hazard: 0
HMIS® ratings
Health: 1
Flammability: 0
Instability: 0
NFPA ratings
List of abbreviations
SWERF = Size-Weighted Relevant Fine Fraction methodology is a scientific method developed to
quantify the content of respirable particles within a bulk product. All details about the SWERF
method are available at www.crystallinesilica.eu.
UVCB = a substance of Unknown or Variable composition, Complex reaction products or
Biological materials
For any information on literature references or toxicity/ecotoxicity studies, please contact the
supplier.
References
8 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
The information provided in this Safety Data Sheet is correct to the best of our knowledge,
information and belief at the date of its publication. The information given is designed only as a
guidance for safe handling, use, processing, storage, transportation, disposal and release and is
not to be considered a warranty or quality specification. The manufacturer expressly does not
make any representations, warranties, or guarantees as to its accuracy, reliability or completeness
nor assumes any liability, for its use. It is the user's responsibility to verify the suitability and
completeness of such information for each particular use. The information relates only to the
specific material designated and may not be valid for such material used in combination with any
other materials or in any process, unless specified in the text. The information in the sheet was
written based on the best knowledge and experience currently available.
Disclaimer
This document has undergone significant changes and should be reviewed in its entirety.Revision Information
9 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
HYDROGEL® PLUS Page 1 of 6 WYO-BEN, INC.
1.800.548.7055

WYO -BEN, INC.
SAFETY DATA SHEET

Product Trade Name: HYDROGEL® PLUS
Chemical Family: Mineral
Application: Drilling Fluid
Manufacturer/Supplier: Wyo-Ben, Inc.
1345 Discovery Drive
Billings, MT 59102 USA
Telephone: [phone]
Facsimile: 406.656.0748
Emergency Phone Number CHEMTREC® 1.800.424.9300

Hazard Classification: Carcinogenicity (Category 1A)
Specific Target Organ Toxicity (Repeated Exposure) (Category 1)
Signal Word: Danger
Hazard Statements: May cause cancer.
Causes damage to organs through prolonged or repeated exposure.
Hazard Symbol: Health Hazard
Precautionary Statements
Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Do not breath dust. Wash face, hands and any exposed skin thoroughly after
handling. Do not eat, drink or smoke when using this product.
Response: If exposed or concerned: Get medical advice/attention.
Get medical attention/advice if you feel unwell.
Storage: Store locked up.
Disposal: Dispose of contents/container in accordance with local/regional/national/international
regulations.
Hazards Not Otherwise
Classified: May cause eye and respiratory irritation.

Substances CAS Number Percent
Crystalline Silica, quartz 14808-60-7 ≤6%
SECTION 1 — CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 — HAZARD IDENTIFICATION
SECTION 3 — COMPOSITION/INFORMATION ON INGREDIENTS
HYDROGEL® PLUS Page 2 of 6 WYO-BEN, INC.
1.800.548.7055

Inhalation: If inhaled, remove to a dust free area. Get medical attention if respiratory irritation develops
or if breathing becomes difficult. Inhalation may aggravate existing respiratory illness.
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get
medical attention if irritation persists.
Skin: Wash with soap and water. Seek medical attention if irritation persists.
Ingestion: Do Not induce vomiting. First aid measures not normally required.
Notes to Physician: Treat symptomatically

Suitable Extinguishing Media: Product is non-combustible. All standard firefighting media may be used.
Unsuitable Extinguishing Media: None
Special Exposure Hazards: None known. Product is not combustible.
Special Protective Equipment and None for product. Wear self-contained breathing apparatus (SCBA) and full
protective gear.
Precautions for Firefighters: Caution: slippery when wet.

NFPA Ratings: Health 0, Flammability 0, Reactivity 0

Personal Precautionary Measures: Use appropriate protective equipment. Avoid creating and breathing dust.
Environmental Precautionary Measures: Keep from entering sewers or water ways.
Procedure for Cleaning/Absorption: Avoid generating dust. Collect using appropriate dustless method. Dispose in
licensed landfill according to local, state and federal regulations.

Handling Precautions: This product contains quartz which may become airborne. Avoid breathing dust. Avoid
creating dusty conditions. Promptly clean up spills to avoid breathing airborne dust. Use only
with adequate ventilation to keep exposure below recommended exposure limits. Wear a
NIOSH/MSHA European Standard En 149, or equivalent certified for silica bearing dust,
respirator when using this product. Material is slippery when wet.
Storage Information: Use good housekeeping in storage and work areas to prevent accumulation of dust. Close
container when not in use. Do not reuse empty container.

Occupational Exposure Limits
Substances CAS Number ACGIH TLV-TWA OSHA PEL-TWA*
Crystalline Silica, quartz 14808-60-7 0.025 mg/m3 10 mg/m3
%SiO2 + 2
* More restrictive exposure limits may be enforced by some states, agencies, or other authorities.
SECTION 4 — FIRST AID MEASURES
SECTION 5 — FIRE FIGHTING MEASURES
SECTION 6 — ACCIDENTAL RELEASE MEASURES
SECTION 7 — HANDLING AND STORAGE
SECTION 8 — EXPOSURE CONTROLS/PERSONAL PROTECTION
HYDROGEL® PLUS Page 3 of 6 WYO-BEN, INC.
1.800.548.7055

Engineering Controls: Use approved industrial ventilation and local exhaust as required to maintain exposures below
applicable exposure limits.
Personal Protective Equipment: If engineering controls and work practices cannot prevent excessive exposures, the selection
and proper use of personal protective equipment should be determined by an industrial
hygienist or other qualified professional based on the specific application of this product.
Respiratory Protection: Not normally needed. If significant exposures exceeding occupational exposure limit are
possible use NIOSH/MSHA respirator approved for silica bearing dust.
Hand Protection: Standard work gloves.
Skin Protection: Wear clothing appropriate for the work environment. Dusty clothing should be laundered
before reuse. Use precautionary measures to avoid creating dust when removing or
laundering clothing.
Eye Protection: Wear safety glasses or goggles to protect against exposure.
Other Precautions: None known.

Physical State: Powdered Solid
Color: Light tan to gray as dry powder
Odor: Odorless
pH: 8 – 10 (5% aqueous suspension)
Specific Gravity @ 20 C (Water=1): 2.45 – 2.55
Density @ 20 C (lbs/gallon): Not determined
Bulk Density @ 20 C (lbs/ft3): 49 - 70
Boiling Point/Range (F/C): Not applicable
Freezing Point/Range (F/C): Not applicable
Vapor Pressure @ 20 C (mmHg): Not applicable
Vapor Density (Air=1): Not applicable
Percent Volatiles: Not applicable
Evaporation Rate (Butyl Acetate=1): Not applicable
Solubility in Water (g/100ml): Insoluble, forms colloidal suspension
Solubility in Solvents (g/100ml): Not applicable
VOCs (lbs/gallon): Not applicable
Viscosity, Dynamic @ 20 C (centipoise): 3.5 – 12.5 (6% aqueous suspension)
Viscosity, Kinematic @ 20 C (centistrokes): Not determined
Partition Coefficient/n-Octanol/Water: Not applicable
Molecular Weight (g/mole): Not applicable
Flash Point/Range (F/C): Not applicable
Flash Point Method: Not applicable
Autoignition Temperature (F/C): Not applicable
SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES
HYDROGEL® PLUS Page 4 of 6 WYO-BEN, INC.
1.800.548.7055

Flammability Limits in Air – Lower (%): Not applicable
Flammability Limits in Air – Upper (%): Not applicable

Reactivity: Nonreactive
Chemical Stability: Stable
Possibility of Hazardous Reactions: Will not occur.
Conditions to Avoid: None
anticipated Incompatibility (Materials to Avoid): None known
Hazardous Decomposition Products: None
Additional Guidelines: Not applicable

Principle Route of Exposure: Eye or skin contact, inhalation.
Symptoms Related to the Physical, Chemical and Toxicological Characteristics
Inhalation: Inhaled crystalline silica in the form or quartz from occupational sources is
carcinogenic to humans (IARC, Group 1).
Skin Contact: May cause skin irritation due to drying.
Eye Contact: May cause mechanical eye irritation.
Ingestion: None known
Aggravated Medical Conditions: Individuals with respiratory disease, including but not limited to asthma and
bronchitis, or subject to eye irritation, should not be exposed to respirable
quartz-bearing dust.
Chronic Effects/Carcinogenicity: Silicosis: Excessive inhalation of respirable crystalline silica dust may cause a
progressive, disabling, and sometimes-fatal lung disease called silicosis.
Symptoms include cough, shortness of breath, wheezing, non-specific chest
illness, and reduced pulmonary function. This disease is exacerbated by
smoking. Individuals with silicosis are predisposed to develop tuberculosis.
Cancer Status: The International Agency for Research on Cancer (IARC, 1997)
concludes that there is sufficient evidence in humans for carcinogenicity of
inhaled crystalline silica from occupational sources (IARC Group 1), that
carcinogenicity was not detected in all industrial circumstances studied and
that carcinogenicity may depend on characteristics of the crystalline silica or
on external factors affecting its biological activity. See IARC Monograph 68,
Silica, Some Silicates and Organic Fibres (June 1997). The National Toxicology
Program (NTP) classifies respirable crystalline silica as “Known to be a human
carcinogen” (NTP 9th Report on Carcinogens, 2000). The American Conference
of Governmental Industrial Hygienists (ACGIH) classifies crystalline silica,
quartz, as a suspected human carcinogen (A2).
Other Information: See “Adverse Effects of Crystalline Silica Exposure” published by the American
Thoracic Society Medical Section of the American Lung Association, American
Journal of Respiratory and Critical Care Medicine, Volume 155, pages 761-768
(1997).
SECTION 10 — STABILITY AND REACTIVITY
SECTION 11 — TOXICOLOGICAL INFORMATION
HYDROGEL® PLUS Page 5 of 6 WYO-BEN, INC.
1.800.548.7055

Toxicity Tests
Oral Toxicity: Not determined
Dermal Toxicity: Not determined
Inhalation Toxicity: Not determined
Primary Irritation Effect: Not classified
Carcinogenicity: Refer to IARC Monograph 68, Silica, Some Silicates and Organic Fibres
(June 1997).
Genotoxicity: Not classified
Reproductive/Developmental Toxicity: Not classified

Mobility (Water/Soil/Air): Not determined
Persistence/Degradability: Not determined
Bio-accumulation: Not determined
Ecotoxicological Information
Acute Fish Toxicity: Not determined
Acute Crustaceans Toxicity: Not determined
Acute Algae Toxicity: Not determined
Chemical Fate Information: Not determined
Other Information: Not applicable

Disposal Method: If product should become a waste dispose in a licensed landfill according to
federal, state and local regulations.
Contaminated Packaging: Follow all applicable national or local regulations.

Land Transportation
DOT – Not regulated as dangerous goods
Canadian TDG – Not regulated as dangerous goods
ADR – Not regulated as dangerous goods
Air Transportation
ICAO/IATA – Not regulated as dangerous goods
Sea Transportation
IMDG – Not regulated as dangerous goods
Other Transportation Information
Labels: None
SECTION 12 — ECOLOGICAL INFORMATION
SECTION 13 — DISPOSAL CONSIDERATIONS
SECTION 14 — TRANSPORT INFORMATION
HYDROGEL® PLUS Page 6 of 6 WYO-BEN, INC.
1.800.548.7055

US Regulations
US TSCA Inventory All components listed on inventory or are exempt.
EPA SARA Title III Extremely Not applicable
Hazardous Substances
EPA SARA (311, 312)
Hazard Class Chronic Health Hazard
EPA SARA (313) Chemicals This product does not contain a toxic chemical for routine annual “Toxic
Chemical Release Reporting” under Section 313 (40 CFR 372).
EPA CERCLA/Superfund Not applicable
Reportable Spill Quantity
EPA RCRA Hazardous Waste If product becomes a waste, it does NOT meet the criteria of a hazardous
Classification waste as defined by the US EPA.
California Proposition 65 This product contains crystalline silica (respirable) which is a substance known
to the State of California to cause cancer.
Canadian Regulations
Canadian DSL Inventory All components listed on inventory or are exempt.
WHMIS Hazard Class This product contains crystalline silica (respirable) and is classified as a Class D,
Division 2, Subdivision A substance.

Prepared 03/18/2015
Last Revision 09/14/2015

All information presented herein is believed to be accurate; however, it is the user’s responsibility to determine in advance of
need that the information is current and suitable for their circumstances. No warranty or guarantee, expressed or implied is
made by WYO-BEN, INC. as to this information, or as to the safety, toxicity or effect of the use of this product.
SECTION 15 — REGULATORY INFORMATION
SECTION 16 — OTHER INFORMATION
DISCLAIMER
SODA ASH Page 1 of 6 WYO-BEN, INC.

WYO -BEN, INC.
SAFETY DATA SHEET

Product Trade Name: SODA ASH
Chemical Family: Mineral
Application: Drilling Fluid Additive

Manufacturer/Supplier: Wyo-Ben, Inc.
1345 Discovery Drive
Billings, MT 59102 USA
Telephone: [phone]
Facsimile: 406.656.0748
Emergency Phone Number CHEMTREC® 800.424.9300

Hazard Classification: Eye Damage/Irritation (Category 2A)
Signal Word: Warning
Hazard statements: Causes serious eye irritation
Hazard Symbol: Exclamation Mark
Precautionary Statements
Prevention: Wash skin thoroughly after handling.
Wear eye protection / face protection.
Response: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Hazards Not Otherwise
Classified: No other hazards not otherwise classified have been identified.

Substances CAS Number Percent
Sodium carbonate 497-19-8 100

General information: No special measures required.

SECTION 1 — CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 — HAZARD IDENTIFICATION COMPOSITION
SECTION 3 —COMPOSITION/INFORMATION ON INGREDIENTS
SECTION 4 — FIRST AID MEASURES
SODA ASH Page 2 of 6 WYO-BEN, INC.
Inhalation: If inhaled, remove to a dust free area. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Skin: Brush off loose particles from skin. Immediately rinse with water. Seek medical
attention if irritation develops and persists.
Eyes: Remove contact lenses if worn. Flush eyes with plenty of water and seek medical
attention if irritation persists.
Ingestion: Rinse out mouth and then drink plenty of water. Do not induce vomiting; Immediately
seek medical attention.
Most important symptoms and effects, both acute and delayed:
Severe eye irritation. Nose, throat and lung irritation (sore throat, nose bleeds). Cough
at high concentrations. Nausea, abdominal pain, vomiting and diarrhea when ingested.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.

Fire Extinguishing Media: All standard firefighting media. Use firefighting measures that suit the
environment and circumstances.
Unsuitable Fire Extinguishing Media : None
Special Exposure Hazards: Formation of toxic gases is possible during heating or in case of fire.
Fumes of sodium oxide and carbon oxides.
Special Protective Equipment for Firefighters: Wear self-contained breathing apparatus (SCBA). Wear fully protective
suit.

Personal Precautionary Measures: Avoid dust formation. Use respiratory protective device against the
effects of fumes, dust and aerosols. Ensure adequate ventilation. Wear
protective equipment. Keep unprotected persons away.
Environmental Precautionary Measures: Do not allow to enter sewers, surface or ground water. Damp down
dust with water spray.
Procedure for Cleaning/Absorption: Collect using appropriate dustless, mechanical method. Dispose of in
accordance with all local, state and federal regulations. Use
appropriate containers for disposal.

Handling Precautions: Ensure adequate ventilation. Prevent formation of dust. Any deposit of dust that
cannot be avoided must be regularly removed. Avoid contact with skin and eyes.
Storage Information: Protect from humidity and water. Store away from foodstuffs.
Incompatibilities: Do not store with acids. Will generate carbon dioxide (CO2) when exposed to acids.
Additional Information: Use good industrial hygiene in storage and work areas to prevent accumulation of dust.
Close container when not in use. Do not reuse empty container.

SECTION 5 — FIRE FIGHTING MEASURES
SECTION 6 — ACCIDENTAL RELEASE MEASURES
SECTION 7 — HANDLING AND STORAGE
SODA ASH Page 3 of 6 WYO-BEN, INC.

Engineering Controls: No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values
that have to be monitored at the workplace.
Personal Protective Equipment: Standard industrial hygiene measures for handling chemicals should be followed. Keep
away from foodstuffs, beverages and feed.
Respiratory Protection: Do not inhale dust, mist or smoke. Respiratory protection not required under normal
conditions of use. Use suitable NIOSH approved respiratory protective device in case of
insufficient ventilation. For spills, respiratory protection is advisable.
Hand Protection: Chemically resistant protective work gloves. The glove material has to be impermeable
and resistant to the product.
Skin Protection: Avoid close or long term contact with the skin. Wash hands before breaks and at the
end of work. Wear clothing appropriate for the work environment. Dusty clothing
should be laundered before reuse. Use precautionary measures to avoid creating dust
when removing or laundering clothing.
Body Protection: Not required under normal conditions of use. Protection may be required for spills.
Eye Protection: Avoid contact with eyes. Wear safety glasses with side shields, goggles or full face mask
to protect against exposure.
Other Precautions: No further relevant information available.

Physical State: Granular Solid
Color: White
Odor: Odorless
Odor Threshold: Not determined
pH: 11.3 – 11.6 (1% aqueous solution)
Specific Gravity @ 20 C (Water=1): 2.45 – 2.55
Density @ 20 C (lbs/gallon / g/cm3): 21.113 / 2.53
Bulk Density @ 20 C (lbs/ft3): 60 - 70
Melting Point (°F/°C): 1564 / 851.1
Boiling Point/Range (°F/°C) Not determined
Freezing Point/Range ((°F/°C): Not applicable
Vapor Pressure @ 20 C (mmHg): Not applicable
Vapor Density (Air=1): Not applicable
Percent Volatiles: Not applicable
Evaporation Rate (Butyl Acetate=1): Not applicable
Solubility in Water: Soluble
SECTION 8 — EXPOSURE CONTROLS/PERSONAL PROTECTION
SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES
SODA ASH Page 4 of 6 WYO-BEN, INC.
Solubility in Solvents (g/100ml): Not applicable
VOCs (lbs/gallon): Not applicable
Viscosity, Dynamic @ 20 C (centipoise): Not applicable
Viscosity, Kinematic @ 20 C (centistrokes): Not applicable
Partition Coefficient/n-Octanol/Water: Not applicable
Flash Point/Range (F/C): Not applicable – non-combustible
Flash Point Method: Not applicable – non-combustible
Autoignition Temperature (F/C): Not applicable – non-combustible
Flammability Limits in Air – Upper/Lower (%): Not applicable – non-combustible

Reactivity: Decomposes by reaction with strong acids.
Chemical Stability: Stable under recommend storage conditions.
Hazardous Polymerization: Will Not Occur
Hazardous Reactions: Strong exothermic reaction with acids. Reacts with halogenated
compounds.
Conditions to Avoid: Avoid contact with acids
Hazardous Decomposition Products: With strong acids: Carbon dioxide. Thermal decomposition may
produce oxides of sodium and carbon.

Probable Route of Exposure: Inhalation, Eye or skin contact
Primary Irritant Effect:
Skin Contact: Slight irritant effect on skin and mucous membranes.
Eye Contact: Serious irritation effect.
Sensitization: No sensitizing effects known.
Acute toxicity:
Oral: LD50/Rat/ 2,800 mg/kg
Dermal: LD50/Rabbit/>2,000 mg/kg
Acute effects: Severely irritating to eyes
Skin Corrosion/Irritation: Rabbit/Not classified as irritating to skin (OECD 404) Unpublished.
Serious Eye Damage/Irritation: Rabbit/Irritating to eyes by standard test method. Unpublished.
Respiratory or Skin Sensitization: No data available.
Mutagenicity: Not considered to be genotoxic.
Carcinogenicity: Not listed as a known, probable, potential or suspected carcinogen by
IARC, NTP or OSHA.
Reproductive Toxicty: No data available.
SECTION 10 — STABILITY AND REACTIVITY
SECTION 11 — TOXICOLOGICAL INFORMATION
SODA ASH Page 5 of 6 WYO-BEN, INC.
STOT Single Exposure: This substance is not classified as specific target organ toxicant, single
exposure.
STOT Repeated Exposure: This substance is not classified as specific target organ toxicant,
repeated exposure.
Aspiration Toxicity: No data available.

Acute Toxicity
Fish: LC50/Lepomis macrochhirus (Bluegill Sunfish)/96 hr/ 300 mg/L
Invertebrates: EC50/Ceriodaphnia dubia (Water Flea)/48 hr/200 – 227 mg/L
Persistence and Degradability
Biodegradability: Not applicable. Inorganic substance.
Photo-degradation: Hydrolyzes in water to form carbonic acid/bicarbonate/carbonate
Bio-accumulation
Bioconcentration Factor (BCF): Not applicable. Inorganic substance.
No relevant information available
Mobility in Soil: Not significant
Ecotoxicity Assessment
Acute aquatic toxicity: Not harmful to aquatic life (LC/EC50 > 100 mg/L)
Chronic aquatic toxicity: Not classified due to data which are conclusive although insufficient for
Classification

Disposal Method: Small amounts may be diluted with plenty of water and washed away.
Dispose of larger amounts in accordance with Local Authority
requirements. The user of this material has the responsibility to dispose
of unused material, residues and containers in compliance with all
relevant local, state and federal laws and regulations regarding
treatment, storage and disposal for hazardous and nonhazardous
wastes. Residual materials should be treated as hazardous.
Contaminated Packaging: Follow all applicable local, state of federal regulations.

UN-Number
DOT, ADN, IMDG, IATA: Not Regulated
UN proper shipping name
DOT, ADN, IMDG, IATA : Not Regulated

Transport hazard class(es)
SECTION 12 — ECOLOGICAL INFORMATION
SECTION 13 — DISPOSAL CONSIDERATIONS
SECTION 14 — TRANSPORT INFORMATION
SODA ASH Page 6 of 6 WYO-BEN, INC.
DOT, ADR, ADN, IMDG, IATA Class: Not Regulated
Packing group
DOT, IMDG, IATA: Not Regulated
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN "Model Regulation": -

US Regulations
US TSCA Inventory Listed.
EPA SARA Title III Extremely Not listed
Hazardous Substances
EPA SARA (313) Chemicals This product does not contain a toxic chemical for routine annual “Toxic
Chemical Release Reporting” under Section 313 (40 CFR 372).
EPA CERCLA/Superfund
Reportable Spill Quantity Not applicable
California Proposition 65 Not listed
Canadian Regulations
Canadian DSL Inventory Not Listed.

Prepared 03/18/2015
Last Revision 09/1/2015

All information presented herein is believed to be accurate; however, it is the user’s responsibility to determine in
advance of need that the information is current and suitable for their circumstances. No warranty or guarantee,
expressed or implied is made by WYO-BEN, INC. as to this information, or as to the safety, toxicity or effect of the use of
this product.

SECTION 15 — REGULATORY INFORMATION
SECTION 16 — OTHER INFORMATION
DISCLAIMER
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 1 of 8
1. Identification
1.1. Product identifier
1.2. Relevant identified uses of the substance or mixture and application method
1.3. Details of the supplier of the safety data sheet
Company Name NorthStar Fluids Solutions
P.O. Box 271036
Louisville, Colorado 80027, USA
Emergency
CHEMTREC (USA)[phone]
24 hour Emergency Telephone No.International [phone]
Customer Service: NorthStar Fluid Solutions [phone]
2. Hazard(s) identification
2.1. Classification of the substance or mixture
Not classified -
2.2. Label elements
Hazard Pictograms
Signal Word Not Classified
Hazard Statements Not Hazardous
Precautionary Statements
[Prevention]:
None
[Response]:
None
[Storage]:None
[Disposal]:
None
2.3 Hazards not otherwise classified
Aqueous solutions or powders that become wet render surfaces extremely slippery.
Intended use Additive
Application Method See Technical Data Sheet.
Product Identity Star-Drill Dry
Alternate Names Anionic Dry PHPA
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 2 of 8
3. Composition/information on ingredients
Substances CAS Number Concentration [%]GHS Classification -US
4. First aid measures
4.1. Description of first aid measures
Inhalation Move to fresh air. Consult a physician if necessary.
Eyes Rinse immediately with plenty of water for at least 15 minutes with eyelids held open.
Obtain medical attention.
Skin Wash off with soap and water. If symptoms persist, call a physician.
Ingestion Immediately rinse mouth with water.Do NOT induce vomiting. Obtain immediate medical
attention.
4.2. Most important symptoms and effects, both acute and delayed
May cause eye and skin irritation.
5. Fire-fighting measures
5.1. Extinguishing media
Water spray, Carbon dioxide (CO2), Dry chemical
5.2. Special hazards arising from the substance or mixture
No information available.
5.3. Advice for fire-fighters
Full protective clothing and approved self-contained breathing apparatus required for firefighting personnel.
In the event of fire, cool tanks with water spray.
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Use appropriate protective equipment.
See Section 8 for additional information.
6.2. Environmental precautions OSHA PEL-TWA
157856-36-5 90-100%Not classifiedAcrylamide/Sodium Acyrlate CoPolymer
In accordance with paragraph (i ) of §1910.1200, the specific chemical identity and/or exact percentage (c oncentration) of composition has been
withheld as a trade secret.
[1] Substance classified with a health or environmental hazard.
[2] Substance with a workplace exposure limit.
[3] PBT-substance or vPvB-substance.
*The full texts of the phrases are shown in Section 16.
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 3 of 8
None known.
6.3. Methods and material for containment and cleaning up
Danger for slipping. Soak up with inert absorbent material. Take up mechanically and collect into suitable
containers for disposal.
7. Handling and storage
7.1. Precautions for safe handling
Ensure adequate ventilation. For personal protection see section 8.
7.2. Conditions for safe storage, including any incompatibilities
Store away from oxidizers. Store in a cool, dry location.
8. Exposure controls and personal protection
8.1.Occupational Exposure Limits
NIOSH/MSHA approved respiratory protection.
Eyes Tightly fitting safety goggles
Hands Impervious gloves
Please observe the instructions regarding permeability and breakthrough time which are
provided by the supplier of the gloves. Also take into consideration the specific local
conditions under which the product is used, such as the danger of cuts, abrasion, and the
contact time.
Skin Protective clothing
Engineering Controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and immediately after handling the product. Avoid contact with skin,eyes and
clothing. Do not breathe vapor. Ensure that eyewash stations and safety showers are close
to the workstation location.Ensure adequate ventilation.
Other Work Practices If engineering controls and work practices cannot prevent excessive exposures, the
selection and proper use of personal protective equipment should be determined by an
industrial hygienist or other qualified professional based on the specific application of this
product.
See section 2 for further details.-[Prevention]:
Substance CAS Number OSHA PEL-TWA / ACGIH TLV-TWA
Contains no hazardous substances 157856-36-5 Not applicable
8.2. Exposure controls
Respiratory When there is potential for airborne exposures in excess of applicable limits, wear
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 4 of 8
9.Physical and chemical properties
Appearance White, granular solid
Odor None
Odor threshold No data available
pH 5 –9 @ 5 g/L
Melting point >150 °C />302 °F
Initial boiling point and boiling range No data available
Flash Point No data available
Evaporation rate (Ether = 1)No data available
Flammability (solid, gas)No data available
Upper/lower flammability or explosive limits No data available
Vapor pressure (Pa)No data available
Vapor Density No data available
Specific Gravity 0.93
Solubility in Water Soluble
Partition coefficient n-octanol/water (Log Kow)-2
Auto-ignition temperature No data available
Decomposition temperature >150 °C />302 °F
Viscosity No data available
Relative Density at 20°C 0.6 –0.9
10.Stability and reactivity
10.1. Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
10.2. Chemical stability
The product is stable if stored and handled as prescribed/indicated.
10.3. Possibility of hazardous reactions
None known.
10.4. Conditions to avoid
Protect from frost, heat and sunlight.
10.5. Incompatible materials
Incompatible with oxidizing agents.
10.6. Hazardous decomposition products
Thermal decomposition may produce: nitrogen oxides (NOx), carbon oxides (COx). Hydrogen cyanide (hydrocyanic
acid) may be produced in the event of combustion in an oxygen deficient atmosphere.
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 5 of 8
11. Toxicological information
11.1 Information on likely routes of exposure
Principle Route of Exposure Eye or skin contact, inhalation.
11.2 Symptoms related to the physical, chemical and toxicological characteristics
Acute Toxicity
Eye Contact May cause mild eye irritation.
Skin Contact May cause mild skin irritation.
Aspiration May cause mild respiratory irritation.
Ingestion May cause mild gastric distress.
Chronic Toxicity/Effects
No data available to indicate product or components present at greater than 0.1%are chronic health hazards.
11.3 Toxicity data
Toxicology data for the components
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Contains no hazardous
substances
NA >2,500 mg/kg (Rat)>10,000 mg/kg (Rabbit)20 mg/L hr (Rat)
Substances CAS Number Skin corrosion/irritation
Contains no hazardous
substances
NA No data available
Substances CAS Number Eye damage/irritation
Contains no hazardous
substances
NA No data available
Substances CAS Number Skin Sensitization
Contains no hazardous
substances
NA No data available
Substances CAS Number Respiratory Sensitization
Contains no hazardous
substances
NA No data available
Substances CAS Number Mutagenic Effects
Contains no hazardous
substances
NA No data available
Substances CAS Number Carcinogenic Effects
Contains no hazardous
substances
NA No data available
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 6 of 8
Substances CAS Number Reproductive toxicity
Contains no hazardous
substances
NA No data available
Substances CAS Number STOT -single exposure
Contains no hazardous
substances
NA No data available
Substances CAS Number STOT -repeated exposure
Contains no hazardous
substances
NA No data available
Substances CAS Number Aspiration hazard
Contains no hazardous
substances
NA No data available
12. Ecological information
12.1. Toxicity
Aquatic Ecotoxicity
Substances CAS
Number
Toxicity to Algae Toxicity to Fish Toxicity to
Microorganisms
Toxicity to
Invertebrates
Contains no hazardous
substances
NA IC50/Scenedesmus
subspicatus/72
hours > 100 mg/L
(OECD 201)
LC50/Danio rerio/96
hours > 100 mg/L
(OECD 203)
No data available EC50/Daphnia
magna/48 hours >
100 mg/L (OECD
202)
12.2. Persistence and degradability
Substances CAS Number Persistence and Degradability
Contains no hazardous substances NA Not readily biodegradable.
Does not hydrolyze.
12.3. Bioaccumulative potential
Substances CAS Number Log Pow
Contains no hazardous substances NA -2
12.4. Mobility in soil
Substances CAS Number Mobility
Contains no hazardous substances NA No data available
12.5. Results of PBT and vPvB assessment
No information available
12.6. Other adverse effects
No information available
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 7 of 8
13. Disposal considerations
13.1. Waste treatment methods
Disposal Method
Disposal should be made in accordance with federal, state, and local regulations.
Container disposal
Follow all applicable national or local regulations.
14. Transport information
DOT (Domestic Surface
Transportation)
IMO / IMDG (Ocean
Transportation)
ICAO/IATA
14.1. UN number Not restricted Not restricted Not restricted
14.2. UN proper shipping
name
Not restricted Not restricted Not restricted
14.3. Transport hazard
class(es)
DOT Hazard Class:Not
applicable
IMDG:Not applicable
Sub Class:Not
applicable
Air Class:Not
applicable
14.4. Packing group Not applicable Not applicable Not applicable
14.5. Environmental hazards
IMDG Not applicable
14.6. Special precautions for user
None
15. Regulatory information
US Regulations
US TSCA Inventory All components listed on inventory or are exempt.
EPA SARA Title III Extremely Not applicable
Hazardous Substances
EPA SARA (311,312) Hazard Not determined
Class
California Proposition 65 All components listed do not apply to the California Proposition 65
Regulation.
MA Right-to-Know Law Does not apply.
NJ Right-to-Know Law Does not apply.
PA Right-to-Know Law Does not apply.
Safety Data Sheet
Star-Drill Dry
SDS Revision Date:02/22/2017
Page 8 of 8
Canadian Regulations
Canadian DSL Inventory
All components listed on inventory or are exempt.
16. Other information
This is the first version in the GHS SDS format. Listings of changes from previous versions in other formats
are not applicable.
The information and data herein are believed to be accurate and have been compiled from sources believed to be
reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and
handling of the product in compliance with applicable Federal, State and local law and regulations.NorthStar Fluids
Solutions makes no warranty of any kind, express or implied, concerning the accuracy of completeness of the
information and data herein. The implied warranties of merchantability and fitness for a particular purpose are
specifically excluded.NorthStar Fluid Solutions will not be liable for claims relating to any use of this product.
Emergency Overview:
Risk Classification System:
HEALTH 1
FLAMMABILITY 0
PHYSICAL 0
PPE B
Flammability
0 Physical
1 0
Health
Special Risk
End of Document
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 1 of 9
1. Identification
1.1. Product identifier
Product Identity Star-Drill Liquid
Alternate Names None
1.2. Relevant identified uses of the substance or mixture and application method
Intended use Additive
Application Method See Technical Data Sheet.
1.3. Details of the supplier of the safety data sheet
Company Name NorthStar Fluids Solutions
P.O. Box 271036
Louisville, Colorado 80027, USA
Emergency
CHEMTREC (USA)[phone]
24 hour Emergency Telephone No.International [phone]
Customer Service: NorthStar Fluid Solutions [phone]
2. Hazard(s) identification
2.1. Classification of the substance or mixture
Skin corrosion/irritation Category 2
2.2. Label elements
Hazard Pictograms
Signal Word Warning
Hazard Statements H315 Causes skin irritation.
Precautionary Statements
[Prevention]:
P280 Wear protective gloves.
P264 Wash with plenty of water and soap thoroughly after handling.
[Response]:
P302 +P352 IF ON SKIN (or hair):Wash with plenty of soap and water.
P332 +P313 If skin irritation occurs:Get medical advice/attention.
P362 Take off contaminated clothing.
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 2 of 9
[Storage]:None
[Disposal]:
P501 Dispose of contents/container as special waste in compliance with all regulations
2.3 Hazards not otherwise classified
Caution –Solutions extremely slippery when spilled
Causes skin irritation
May cause eye irritation
May cause gastrointestinal irritation, nausea, vomiting, and diarrhea
Avoid inhalation of mists/vapours.
3. Composition/information on ingredients
Substances CAS Number Concentration [%]GHS Classification -US
Distillates (petroleum),hydrotreated light 64742-47-8 23 -25%Danger
Alcohols,C12-16,ethoxylated 68551-12-2 0 -5%Danger
Alcohols,C10-16,ethoxylated 68002-97-1 0 -5%Danger
Alcohols,C12-14,ethoxylated 68439-50-9 0 -5%Danger
In accordance with paragraph (i) of §1910.1200, the specific chemical identity and/or exact percentage (concentration) of composition has been
withheld as a trade secret.
[1] Substance classified with a health or environmental hazard.
[2] Substance with a workplace exposure limit.
[3] PBT-substance or vPvB-substance.
*The full texts of the phrases are shown in Section 16.
4. First aid measures
4.1. Description of first aid measures
Inhalation Move to fresh air. Consult a physician if necessary.
Eyes Rinse immediately with plenty of water for at least 15 minutes with eyelids held open.
Obtain medical attention.
Skin Take off contaminated clothing and shoes immediately. Wash off with soap and water. If
symptoms persist, call a physician. Wash contaminated clothing before re-use.
Ingestion Immediately rinse mouth with water.Do NOT induce vomiting. Obtain immediate medical
attention.
4.2. Most important symptoms and effects, both acute and delayed
May cause eye and skin irritation.
5. Fire-fighting measures
5.1. Extinguishing media
Water spray, Carbon dioxide (CO2), Dry chemical
Alcohol-resistant foam
5.2. Special hazards arising from the substance or mixture
No information available.
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 3 of 9
5.3. Advice for fire-fighters
Full protective clothing and approved self-contained breathing apparatus required for firefighting personnel.
In the event of fire, cool tanks with water spray.
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Where the exposure level is not known, wear approved, positive pressure,self-contained
respirator. Where the exposure level is known, wear approved respirator suitable for the level of exposure.
6.2. Environmental precautions
Prevent from entering sewers, waterways, or low areas.
6.3. Methods and material for containment and cleaning up
Danger for slipping. Soak up with inert absorbent material. Take up mechanically and collect into suitable
containers for disposal. Flush with water. Use detergent if needed.
7. Handling and storage
7.1. Precautions for safe handling
Ensure adequate ventilation. For personal protection see section 8.
7.2. Conditions for safe storage,including any incompatibilities
Flashpoint determination was performed using a Pensky Martens type closed cup method. The method indicates a flash
point greater than 93,3° C (200° F). Although there was no flashpoint detected below 93,3° C (200° F) some flammable
vapours were evolved during the test as evidenced by the enlargement of the flame. Therefore caution should be
exercised during storage and handling.
Materials for packaging
Unsuitable material:To avoid product degradation and equipment corrosion, do not use iron, copper or aluminium
containers or equipment.
8. Exposure controls and personal protection
8.1.Occupational Exposure Limits
Substance
Distillates (petroleum),hydrotreated light ACGIH TLV-TWA TWA value 200 mg/m3 Non-aerosol (total hydrocarbon vapor);
Application restricted to conditions in which there are negligible aerosol
exposures.
Skin Designation Non-aerosol (total hydrocarbon vapor);
The substance can be absorbed through the skin.
8.2. Exposure controls
Respiratory When there is potential for airborne exposures in excess of applicable limits, wear
NIOSH/MSHA approved respiratory protection.
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 4 of 9
Eyes Tightly fitting safety goggles
Hands Impervious gloves
Please observe the instructions regarding permeability and breakthrough time which are
provided by the supplier of the gloves. Also take into consideration the specific local
conditions under which the product is used, such as the danger of cuts, abrasion, and the
contact time.
Skin Protective clothing
Engineering Controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and immediately after handling the product. Avoid contact with skin, eyes and
clothing. Do not breathe vapor. Ensure that eyewash stations and safety showers are close
to the workstation location.Ensure adequate ventilation.
Other Work Practices If engineering controls and work practices cannot prevent excessive exposures, the
selection and proper use of personal protective equipment should be determined by an
industrial hygienist or other qualified professional based on the specific application of this
product.
See section 2 for further details.-[Prevention]:
9. Physical and chemical properties
Appearance White, viscous liquid
Odor Hydrocarbon-like
Odor threshold No data available
pH 5 -8 @ 5 g/L
Melting point / freezing point No data available
Initial boiling point and boiling range 175 °C / 347 °F
Flash Point >201 °F (Pensky-Martens)
Evaporation rate (Ether = 1)< 1
Flammability (solid, gas)No data available
Upper/lower flammability or explosive limits No data available
Vapor pressure (Pa)No data available
Vapor Density No data available
Specific Gravity No data available
Solubility in Water Soluble in water
Partition coefficient n-octanol/water (Log Kow)No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity >20.5 mm²/s @ 40°C
Density Approximately 1.1 g/cm3
9.2. Other information
No data available
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 5 of 9
10. Stability and reactivity
10.1. Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
10.2. Chemical stability
The product is stable if stored and handled as prescribed/indicated.
10.3. Possibility of hazardous reactions
None known.
10.4. Conditions to avoid
Protect from frost, heat and sunlight.
10.5. Incompatible materials
Incompatible with oxidizing agents.
10.6. Hazardous decomposition products
Thermal decomposition may produce: nitrogen oxides (NOx), carbon oxides (COx). Hydrogen cyanide (hydrocyanic
acid) may be produced in the event of combustion in an oxygen deficient atmosphere.
11. Toxicological information
11.1 Information on likely routes of exposure
Principle Route of Exposure Eye or skin contact, inhalation.
11.2 Symptoms related to the physical, chemical and toxicological characteristics
Acute Toxicity
Eye Contact May cause mild eye irritation.
Skin Contact May cause mild skin irritation.
Aspiration May cause mild respiratory irritation.
Ingestion May cause mild gastric distress.
Chronic Toxicity/Effects
No data available to indicate product or components present at greater than 0.1%are chronic health hazards.
11.3 Toxicity data
Toxicology data for the components
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Hydrotreated light
petroleum distillate
64742-47-8 > 5000 mg/kg (Rat)(similarsubstance)>2000 mg/kg (Rabbit) (similarsubstance)> 5.28 mg/L (Rat) 4h (similarsubstance)
Ethoxylated alcohol Proprietary 1700 mg/kg (Rat)
1650 mg/kg (Dog)
1100 mg/kg (Rat) (similar
substance)
2850 mg/kg (Rat)
> 2000 mg/kg (Rabbit) (similarsubstance)> saturated concentration (similarsubstance)
Substances CAS Number Skin corrosion/irritation
Hydrotreated light
petroleum distillate
64742-47-8 Non-irritating to the skin (similar substances)
Ethoxylated alcohol Proprietary Causes moderate skin irritation.(Rabbit) (similar substances)
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 6 of 9
Substances CAS Number Eye damage/irritation
Hydrotreated light
petroleum distillate
64742-47-8 Non-irritating to the eye (Rabbit)
Ethoxylated alcohol Proprietary Causes severe eye irritation which may damage tissue.(Rabbit) (similar substances)
Substances CAS Number Skin Sensitization
Hydrotreated light
petroleum distillate
64742-47-8 Did not cause sensitization on laboratory animals (guinea pig) (similar substances)
Ethoxylated alcohol Proprietary Did not cause sensitization on laboratory animals (guinea pig) (similar substances)
Substances CAS Number Respiratory Sensitization
Hydrotreated light
petroleum distillate
64742-47-8 No information available
Ethoxylated alcohol Proprietary No information available
Substances CAS Number Mutagenic Effects
Hydrotreated light
petroleum distillate
64742-47-8 In vitro tests did not show mutagenic effects In vivo tests did not show mutagenic effects. (similar
substances)
Ethoxylated alcohol Proprietary In vitro tests did not show mutagenic effects In vivo tests did not show mutagenic effects. (similar
substances)
Substances CAS Number Carcinogenic Effects
Hydrotreated light
petroleum distillate
64742-47-8 Did not show carcinogenic effects in animal experiments
Ethoxylated alcohol Proprietary Did not show carcinogenic or teratogenic effects in animal experiments (similar substances)
Substances CAS Number Reproductive toxicity
Hydrotreated light
petroleum distillate
64742-47-8 Animal testing did not show any effects on fertility. Did not show teratogenic effects in animal
experiments. (similar substances)
Ethoxylated alcohol Proprietary Animal testing did not show any effects on fertility. Did not show teratogenic effects in animal
experiments. (similar substances)
Substances CAS Number STOT -single exposure
Hydrotreated light
petroleum distillate
64742-47-8 May cause disorder and damage to the Central Nervous System (CNS) (similar substances)
Ethoxylated alcohol Proprietary No significant toxicity observed in animal studies at concentration requiring classification. (similar
substances)
Substances CAS Number STOT -repeated exposure
Hydrotreated light
petroleum distillate
64742-47-8 No significant toxicity observed in animal studies at concentration requiring classification. (similar
substances)
Ethoxylated alcohol Proprietary No significant toxicity observed in animal studies at concentration requiring classification. (similar
substances)
Substances CAS Number Aspiration hazard
Hydrotreated light
petroleum distillate
64742-47-8 Aspiration into the lungs may cause chemical pneumonitis including coughing, difficulty breathing,
wheezing, coughing up blood and pneumonia, which can be fatal.
Ethoxylated alcohol Proprietary Not applicable
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 7 of 9
12. Ecological information
12.1. Toxicity
Aquatic Ecotoxicity
Substances CAS
Number
Toxicity to Algae Toxicity to Fish Toxicity to
Microorganisms
Toxicity to
Invertebrates
Hydrotreated light
petroleum distillate
64742-47-8 EC50 (72h) > 1,000
mg/L
(Skeletonema costatum)
ErL50 (72h) > 1000
mg/L
(Pseudokirchneriella
subcapitata)
EbL50 (72h) > 1000
mg/L
(Pseudokirchneriella
subcapitata)
NOELR (72h) 1000
mg/L
(Pseudokirchneriella
subcapitata)
LC50 (96h) > 10,000
mg/L (Scophthalmus
maximus)
LL50 (96h) > 1000 mg/L
(Oncorhynchus
mykiss)
No information available LC50 (48h) > 10,000
mg/L (Acartia tonsa)
EC50 (48h) 1100 mg/L
(Daphnia pulex)
LC50 (48h) 0.12 mg/L
(Daphnia magna)
EL50 (48h) > 1000 mg/L
(Daphnia magna)
Ethoxylated
alcohol
Proprietary EC50 (48h) 2-4 mg/L
(Selenastrum
capricornutum) (similar
substance)
ErC50 (72h) 0.282 mg/L
(Selenastrum
capricornutum) (similar
substance)
ErC10 0.137 mg/L
(Scenedesmus
subspicatus) (similar
substance)
2.6 mg/L (Brachydanio
rerio) (similar
substance)
LC50 (96h)1.1 mg/L
(Salmo gairdneri)
(similar
substance)
NOEC 0.88 mg/L
(reproduction) (Lepomis
macrochirus) (similar
substance)
No information available EC50 (48h) 1.2 mg/L
(Daphnia magna)
(Similar
substance)
EC50 (48h) 0.6 mg/L
(Daphnia magna)
(Similar
substance)
NOEC (21d) 0.77 mg/L
(reproduction) (Daphnia
magna) (Similar
substance)
12.2. Persistence and degradability
Substances CAS Number Persistence and Degradability
Hydrotreated light petroleum distillate 64742-47-8 Readily biodegradable (40% @ 28d)
Ethoxylated alcohol Proprietary Readily biodegradable (40% @ 28d)
12.3. Bioaccumulative potential
Substances CAS Number Log Pow
Hydrotreated light petroleum distillate 64742-47-8 No information available
Ethoxylated alcohol Proprietary 5.17
12.4. Mobility in soil
Substances CAS Number Mobility
Hydrotreated light petroleum distillate 64742-47-8 No information available
Ethoxylated alcohol Proprietary Kd = 3.07 L/kg
Kd = 3.09 L/kg
12.5. Results of PBT and vPvB assessment
No information available
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 8 of 9
12.6. Other adverse effects
No information available
13. Disposal considerations
13.1. Waste treatment methods
Disposal Method
Disposal should be made in accordance with federal, state, and local regulations.
Container disposal
Follow all applicable national or local regulations.
14. Transport information
DOT (Domestic Surface
Transportation)
IMO / IMDG (Ocean
Transportation)
ICAO/IATA
14.1. UN number Not restricted Not restricted Not restricted
14.2. UN proper shipping
name
Not restricted Not restricted Not restricted
14.3. Transport hazard
class(es)
DOT Hazard Class:Not
applicable
IMDG:Not applicable
Sub Class:Not
applicable
Air Class:Not
applicable
14.4. Packing group Not applicable Not applicable Not applicable
14.5. Environmental hazards
IMDG Not applicable
14.6. Special precautions for user
None
15. Regulatory information
US Regulations
US TSCA Inventory All components listed on inventory or are exempt.
EPA SARA Title III Extremely Not applicable
Hazardous Substances
EPA SARA (311,312) Hazard Not determined
Class
California Proposition 65 All components listed do not apply to the California Proposition 65
Regulation.
MA Right-to-Know Law Does not apply.
NJ Right-to-Know Law Does not apply.
Safety Data Sheet
Star-Drill Liquid
SDS Revision Date:02/22/2017
Page 9 of 9
PA Right-to-Know Law Does not apply.
Canadian Regulations
Canadian DSL Inventory
All components listed on inventory or are exempt.
16. Other information
This is the first version in the GHS SDS format. Listings of changes from previous versions in other formats
are not applicable.
The information and data herein are believed to be accurate and have been compiled from sources believed to be
reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and
handling of the product in compliance with applicable Federal, State and local law and regulations.NorthStar Fluids
Solutions makes no warranty of any kind, express or implied, concerning the accuracy of completeness of the
information and data herein. The implied warranties of merchantability and fitness for a particular purpose are
specifically excluded.NorthStar Fluid Solutions will not be liable for claims relating to any use of this product.
Emergency Overview:
Risk Classification System:
HEALTH 1
FLAMMABILITY 1
PHYSICAL 0
PPE C
Flammability
1 Physical
1 0
Health
Special Risk
End of Document
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 1 of 8
1. Identification
1.1. Product identifier
Product Identity Trol-Star LV
Alternate Names None
1.2. Relevant identified uses of the substance or mixture and application method
Intended use Fluid Loss Additive
Application Method See Technical Data Sheet.
1.3. Details of the supplier of the safety data sheet
Company Name NorthStar Fluid Solutions
P.O. Box 271036
Louisville, Colorado 80027, USA
Emergency
CHEMTREC (USA)[phone]
24 hour Emergency Telephone No.International [phone]
Customer Service: NorthStar Fluid Solutions [phone]
2. Hazard(s) identification
2.1. Classification of the substance or mixture
Combustible dust
2.2.Label elements
Hazard Pictograms
Signal Word Warning
Hazard Statements May form combustible dust concentrations in air.
Precautionary Statements
[Prevention]:None
[Response]:None
[Storage]:None
[Disposal]:None
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 2 of 8
Contains Substances CAS Number
Modified starch Proprietary
2.3 Hazards not otherwise classified
None known
3. Composition/information on ingredients
Substances CAS Number PERCENT (w/w)GHS Classification -US
Modified starch Proprietary 100%Combustible Dust
In accordance with paragraph (i) of §1910.1200, the specific chemical identity and/or exact percentage (concentration) of composition has been
withheld as a trade secret.
[1] Substance classified with a health or environmental hazard.
[2] Substance with a workplace exposure limit.
[3] PBT-substance or vPvB-substance.
*The full texts of the phrases are shown in Section 16.
4. First aid measures
4.1. Description of first aid measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Eyes In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and
get medical attention if irritation persists.
Skin Wash with soap and water. Get medical attention if irritation persists.
Ingestion Under normal conditions, first aid procedures are not required.
4.2. Most important symptoms and effects, both acute and delayed
No significant hazards expected.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to Physician Treat symptomatically.
5. Fire-fighting measures
5.1. Extinguishing media
Water fog, carbon dioxide, foam, dry chemical.
5.2. Special hazards arising from the substance or mixture
Special Exposure Hazards
Organic dust in the presence of an ignition source can be explosive in high concentrations. Good housekeeping
practices are required to minimize this potential. Decomposition in fire may produce toxic gases.
5.3. Advice for fire-fighters
Full protective clothing and approved self-contained breathing apparatus required for fire fighting personnel.
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 3 of 8
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Use appropriate protective equipment. Avoid creating and breathing dust.
See Section 8 for additional information
6.2. Environmental precautions
None known.
6.3. Methods and material for containment and cleaning up
Scoop up and remove.
7. Handling and storage
7.1. Precautions for safe handling
Avoid creating or inhaling dust. Avoid dust accumulations. Slippery when wet. Handle in accordance with good
industrial hygiene and safety practice.
7.2. Conditions for safe storage, including any incompatibilities
Store away from oxidizers. Store in a cool, dry location. Product has a shelf life of 36 months.
7.3. Specific end use(s)
None known.
8. Exposure controls and personal protection
8.1. Control parameters
Exposure
Substances CAS Number OSHA PEL-TWA ACGIH TLV-TWA
Modified starch Proprietary Not applicable Not applicable
8.2. Exposure controls
Respiratory Not normally needed. But if significant exposures are possible then the following respirator
is recommended: Dust/mist respirator.(N95, P2/P3)
Eyes Wear safety glasses or goggles to protect against exposure.
Skin Normal work coveralls and gloves.
Engineering Controls Use in a well ventilated area.
Other Work Practices None known.
See section 2 for further details.-[Prevention]:
9. Physical and chemical properties
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 4 of 8
Appearance Powder, Off white
Odor Starch
Odor threshold No information available
pH 8-11 (2%)
Melting point / freezing point No information available
Initial boiling point and boiling range No data available
Flash Point No data available
Evaporation rate (Ether = 1)No data available
Flammability (solid, gas)No data available
Upper/lower flammability or explosive limits No data available
Vapor pressure (Pa)No data available
Vapor Density No data available
Specific Gravity 1.5
Solubility in Water Soluble in water
Partition coefficient n-octanol/water (Log Kow)No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity (cSt)No data available
Density (lbs/gal)No data available
9.2. Other information
VOC Content (%)No data available
Bulk Density 30-40 lbs/ft3
10. Stability and reactivity
10.1. Reactivity
Not expected to be reactive
10.2. Chemical stability
Stable
10.3. Possibility of hazardous reactions
Will not occur
10.4. Conditions to avoid
Keep away from heat, sparks and flame.
10.5. Incompatible materials
Strong oxidizers.
10.6. Hazardous decomposition products
Carbon monoxide and carbon dioxide.
11. Toxicological information
11.1 Information on likely routes of exposure
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 5 of 8
Principle Route of Exposure Eye or skin contact inhalation.
11.2 Symptoms related to the physical, chemical and toxicological characteristics
Acute Toxicity
Inhalation None known.
Eye Contact None known.
Skin Contact None known.
Ingestion None known.
Chronis Effects/ Carcinogenicity No data available to indicate product or components present at greater
than 0.1%are chronic health hazards.
11.3 Toxicity data
Toxicology data for the components
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Modified starch Proprietary >2000 mg/kg (Rat)
27,000 mg/kg (Rat) (similar
substance)
>2000 mg/kg (Rat) (similar
substance)
>5 mg/L (Rat) 4h
>5.8 mg/L (Rat) 4h (similar
substance)
Substances CAS Number Skin corrosion/irritation
Modified starch Not irritating to skin in rabbits.
Substances CAS Number Eye damage/irritation
Modified starch No data of sufficient quality are available.
Substances CAS Number Skin Sensitization
Modified starch Patch test on human volunteers did not demonstrate sensitization properties (similar substances)
Substances CAS Number Respiratory Sensitization
Modified starch No information available
Substances CAS Number Mutagenic Effects
Modified starch In vitro tests did not show mutagenic effects (similar substances)
Substances CAS Number Carcinogenic Effects
Modified starch Not regarded as carcinogenic.
Substances CAS Number Reproductive toxicity
Modified starch Animal testing did not show any effects on fertility. Did not show teratogenic effects in animal
experiments. (similar substances)
Substances CAS Number STOT -single exposure
Modified starch No significant toxicity observed in animal studies at concentration requiring classification.
Substances CAS Number Aspiration hazard
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 6 of 8
Modified starch Not applicable
12. Ecological information
12.1. Toxicity
Ecotoxicity Effects
Product Ecotoxicity Data
No data available
Substance Ecotoxicity Data
Substances CAS Number Toxicity to Algae Toxicity to Fish Toxicity to
Microorganisms
Toxicity to Invertebrates
Modified starch Proprietary No information available No Information available No information available No information
available
12.2. Persistence and degradability
Substances CAS Number Persistence and Degradability
Modified starch Proprietary (>80% @ 7d)
12.3. Bioaccumulative potential
Substances CAS Number Log Pow
Modified starch Proprietary No information available
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 7 of 8
12.4. Mobility in soil
Substances Mobility
Modified starch No information available
12.5. Results of PBT and vPvB assessment
No information available
13. Disposal considerations
13.1. Waste treatment methods
Disposal Method Bury in a licensed landfill according to federal, state, and local regulations.
Contaminated Packaging Follow all applicable national or local regulations.
14. Transport information
DOT (Domestic Surface
Transportation)
IMO / IMDG (Ocean
Transportation)
ICAO/IATA
14.1. UN number Not restricted Not restricted Not restricted
14.2. UN proper shipping
name
Not restricted Note restricted Not restricted
14.3. Transport hazard
class(es)
DOT Hazard Class:Not
applicable
IMDG:Not applicable
Sub Class:Not
applicable
Air Class:Not
applicable
14.4. Packing group Not applicable Not applicable Not applicable
14.5. Environmental hazards
IMDG Not applicable
14.6. Special precautions for user
None
15. Regulatory information
US TSCA Inventory All components listed on inventory or are exempt.
EPA SARA Title III Extremely Not applicable
Hazardous Substances
EPA SARA (311,312) Hazard None
Class
EPA SARA (313) Chemicals This product does not contain a toxic chemical for routine annual "Toxic
Chemical Release Reporting" under Section 313 (40 CFR 372).
Safety Data Sheet
Trol-Star LV
SDS Revision Date:02/21/2017
Page 8 of 8
EPA CERCLA/Superfund Not applicable
Reportable Spill Quantity
EPA RCRA Hazardous Waste If product becomes a waste, it does NOT meet the criteria of a
Classification hazardous waste as defined by the US EPA.
California Proposition 65 All components listed do not apply to the California Proposition 65
Regulation.
MA Right-to-Know Law Does not apply.
NJ Right-to-Know Law Does not apply.
PA Right-to-Know Law Does not apply.
Canadian Regulations
Canadian DSL Inventory All components listed on inventory or are exempt.
16. Other information
This is the first version in the GHS SDS format. Listings of changes from previous versions in other formats
are not applicable.
The information and data herein are believed to be accurate and have been compiled from sources believed to be
reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and
handling of the product in compliance with applicable Federal, State and local law and regulations.NorthStar Fluid
Solutions makes no warranty of any kind, express or implied, concerning the accuracy of completeness of the
information and data herein. The implied warranties of merchantability and fitness for a particular purpose are
specifically excluded.NorthStar Fluid Solutions will not be liable for claims relating to any use of this product.
Emergency Overview:
Risk Classification System:
HEALTH 1
FLAMMABILITY 0
PHYSICAL 0
PPE E
Flammability
0 Physical
1 0
Health
Special Risk
End of Document
216 Balcatta Road, Balcatta, WA 6021 Australia
CONTACT US
AUSTRALIA
PERTH (HEAD OFFICE)
T [phone]
F [phone]
[e-mail]
AFRICA
SOUTH AFRICA
T [phone]
EUROPE
GERMANY
T +49 4402/69 50 0
SOUTHAMERICA
CHILE
T [phone]
MEXICO
T [phone]
NORTHAMERICA
CANADA
T [phone]
USA
T [phone]
amcmud.com
ADVANTAGES
ŠVery economical, 100 % active
ŠEliminates wastage “no fish eyes”
ŠEasily mixed into low shear environments
ŠEffective in fresh, hard and saline environments
ŠPromotes thin slick robust filter cake
ŠControls fluid loss without significantly increasing
fluid viscosity
ŠSuppor ts hole stability in reactive clays and shales
ŠCompatible with all water based drilling fluid
systems polymers and lubricants
ŠSupplements the properties of a bentonite base
drilling fluid
ŠImproves core recovery and penetration rates
ŠReduces friction and frequency of differential
sticking
ŠNon-polluting and environmentally friendly.
AMC EZEE PAC R
VISCOSIFERS
216 Balcatta Road, Balcatta, WA 6021 Australia
CONTACT US
AUSTRALIA
PERTH (HEAD OFFICE)
T [phone]
F [phone]
[e-mail]
AFRICA
SOUTH AFRICA
T [phone]
EUROPE
GERMANY
T +49 4402/69 50 0
SOUTH AMERICA
CHILE
T [phone]
MEXICO
T [phone]
NORTH AMERICA
CANADA
T [phone]
USA
T [phone]
amcmud.com
DESCRIPTION
AMC EZEE PAC R is a new generation highly dispersive high
quality polyanionic cellulose polymer used for viscosity and
water loss control in most water based drilling fluid systems.
AMC EZEE PAC R will not fisheye and has been designed to
disperse rapidly into any make up water even under the poorest
conditions. The mixing efficiencies of AMC EZEE PAC R reduces
wastage and promotes lower mud costs and total hole costs.
APPLICATION
AMC EZEE PAC R forms a protective colloid which inhibits
the hydration of water sensitive formations; it has applications
in most drilling mediums and has the ability to improve core
recovery in diamond drilling, can be added to enhance a
bentonite base system and is compatible with most polymers
and lubricants. Addition rates can be adjusted to suit specific
applications, hardness must not exceed 400 mg/L of calcium.
RECOMMENDED TREATMENT
Application kg per
1000 L
To reduce torque and improve core recovery 1.0 - 3.0
To provide encapsulation and stabilise clays and
shales 2.0 - 5.0
To improve filter cake 1.5 - 2.5
To improve the properties of a bentonite base
drilling fluid 0.5 - 2.5
AMC EZEE PAC R can be slowly introduced into mechanical
agitation, through water discharge or through a mud hopper.
PHYSICAL PROPERTIES
Appearance: White free flowing powder
pH (0.2 % solution): 8.5 – 9.5
Several factors will dictate the most appropriate concentration
rate. Please contact your nearest AMC representative for
optimum results.
AMC Chemwatch Hazard Alert Code: 1
AMC Ezee Pac R
Chemwatch: 4734-88
Version No: 6.1.1.1
Safety Data Sheet according to WHS and ADG requirements
Issue Date: 12/16/2015
Print Date: 04/15/2016
Initial Date: Not Available
L.GHS.AUS.EN
SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING
Product Identifier
Product name AMC Ezee Pac R
Chemical Name sodium carboxymethylcellulose
Synonyms polyanionic cellulose [CAS: 9004-32-4]
Other means of
identification Not Available
Relevant identified uses of the substance or mixture and uses advised against
Relevant identified
uses
Drilling fluids compound.
Details of the supplier of the safety data sheet
Registered company
name
AMC
Address 216 Balcatta Rd, Balcatta WA 6021 Australia
Telephone [phone]
Fax [phone]
Website www.amcoilandgas.com, www.amcmud.com
Email [e-mail], [e-mail]
Emergency telephone number
Association /
Organisation Chemwatch
Emergency telephone
numbers 1800 039 008
Other emergency
telephone numbers Not Available
CHEMWATCH EMERGENCY RESPONSE
Primary Number Alternative Number 1 Alternative Number 2
1800 039 008 [phone] Not Available
Once connected and if the message is not in your prefered language then please dial 01
SECTION 2 HAZARDS IDENTIFICATION
Classification of the substance or mixture
NON-HAZARDOUS CHEMICAL. NON-DANGEROUS GOODS. According to the WHS Regulations and the ADG Code.
CHEMWATCH HAZARD RATINGS
MaxMin
Flammability 1
Toxicity 0
Body Contact 0
Reactivity 1
Chronic 0
0 = Minimum
1 = Low
2 = Moderate
3 = High
4 = Extreme
Poisons Schedule Not Applicable
Classification Not Applicable
Label elements
GHS label elements Not Applicable
SIGNAL WORD NOT APPLICABLE
Hazard statement(s)
Not Applicable
Precautionary statement(s) Prevention
Not Applicable
Precautionary statement(s) Response
Not Applicable
Precautionary statement(s) Storage
Not Applicable
Precautionary statement(s) Disposal
Not Applicable
SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS
Substances
See section below for composition of Mixtures
Mixtures
CAS No %[weight]Name
9004-32-4 >99
(polyanionic cellulose)
SECTION 4 FIRST AID MEASURES
Description of first aid measures
Eye Contact
If this product comes in contact with the eyes:
Wash out immediately with fresh running water.
Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally
lifting the upper and lower lids.
Seek medical attention without delay; if pain persists or recurs seek medical attention.
Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
Skin Contact
If skin or hair contact occurs:
Flush skin and hair with running water (and soap if available).
Seek medical attention in event of irritation.
Inhalation
If dust is inhaled, remove from contaminated area.
Encourage patient to blow nose to ensure clear passage of breathing.
If irritation or discomfort persists seek medical attention.
sodium carboxymethylcellulose
Chemwatch: 4734-88
Version No: 6.1.1.1
Page 2 of 7
AMC Ezee Pac R
Issue Date: 12/16/2015
Print Date: 04/15/2016
Ingestion
If swallowed do NOT induce vomiting.
If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and
prevent aspiration.
Observe the patient carefully.
Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious.
Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink.
Seek medical advice.
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5 FIREFIGHTING MEASURES
Extinguishing media
Water spray or fog.
Special hazards arising from the substrate or mixture
Fire Incompatibility Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may
result
Advice for firefighters
Fire Fighting Alert Fire Brigade and tell them location and nature of hazard.
Fire/Explosion Hazard
Solid which exhibits difficult combustion or is difficult to ignite.
Combustion products include:, carbon monoxide (CO), carbon dioxide (CO2), other pyrolysis products typical of burning
organic material
SECTION 6 ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Minor Spills
Clean up all spills immediately.
|Slippery when wet.
Major Spills Clear area of personnel and move upwind.
|Slippery when wet.
Personal Protective Equipment advice is contained in Section 8 of the SDS.
SECTION 7 HANDLING AND STORAGE
Precautions for safe handling
Safe handling
Limit all unnecessary personal contact.
Organic powders when finely divided over a range of concentrations regardless of particulate size or shape and suspended
in air or some other oxidizing medium may form explosive dust-air mixtures and result in a fire or dust explosion (including
secondary explosions)
Minimise airborne dust and eliminate all ignition sources.
Other information Store in original containers.
Conditions for safe storage, including any incompatibilities
Suitable container
Lined metal can, lined metal pail/ can.
Glass container is suitable for laboratory quantities
Storage
incompatibility
Avoid contamination of water, foodstuffs, feed or seed.
Cellulose and its derivatives may react vigorously with calcium oxide, bleaching powder, perchlorates, perchloric acid, sodium
chlorate, fluorine, nitric acid, sodium nitrate and sodium nitrite.
Avoid reaction with oxidising agents
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Control parameters
OCCUPATIONAL EXPOSURE LIMITS (OEL)
INGREDIENT DATA
Not Available
Chemwatch: 4734-88
Version No: 6.1.1.1
Page 3 of 7
AMC Ezee Pac R
Issue Date: 12/16/2015
Print Date: 04/15/2016
EMERGENCY LIMITS
Ingredient Material name TEEL-1 TEEL-2 TEEL-3
sodium
carboxymethylcellulose Sodium carboxymethyl cellulose; (Dowex 11)7.1 mg/m3 78 mg/m3 5300 mg/m3
Ingredient Original IDLH Revised IDLH
sodium
carboxymethylcellulose Not Available Not Available
MATERIAL DATA
Exposure controls
Appropriate
engineering controls Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard.
Personal protection
Eye and face
protection
Safety glasses with side shields
Chemical goggles.
Skin protection See Hand protection below
Hands/feet protection
The selection of suitable gloves does not only depend on the material, but also on further marks of quality which vary from
manufacturer to manufacturer.
Experience indicates that the following polymers are suitable as glove materials for protection against undissolved, dry
solids, where abrasive particles are not present.
Body protection See Other protection below
Other protection No special equipment needed when handling small quantities.
Thermal hazards Not Available
Respiratory protection
Particulate.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance Lightly coloured odourless powder, soluble in water.
Physical state Divided Solid Relative density
(Water = 1)1.5-1.6
Odour Not Available Partition coefficient
n-octanol / water Not Available
Odour threshold Not Available Auto-ignition
temperature (°C)Not Available
pH (as supplied)Not Applicable Decomposition
temperature Not Available
Melting point /
freezing point (°C)
Not Available Viscosity (cSt)Not Applicable
Initial boiling point
and boiling range (°C)Not Applicable Molecular weight
(g/mol)Not Applicable
Flash point (°C)Not Available Taste Not Available
Evaporation rate Not Applicable Explosive properties Not Available
Flammability Not Available Oxidising properties Not Available
Upper Explosive Limit
(%)
Not Available Surface Tension
(dyn/cm or mN/m)
Not Applicable
Lower Explosive Limit
(%)Not Available Volatile Component
(%vol)Not Available
Vapour pressure (kPa)Not Applicable Gas group Not Available
Solubility in water
(g/L)Miscible pH as a solution (1%)Not Available
Chemwatch: 4734-88
Version No: 6.1.1.1
Page 4 of 7
AMC Ezee Pac R
Issue Date: 12/16/2015
Print Date: 04/15/2016
Legend: – Data available but does not fill the criteria for classification
– Data required to make classification available
– Data Not Available to make classification
Vapour density (Air =
1)Not Applicable VOC g/L Not Available
SECTION 10 STABILITY AND REACTIVITY
Reactivity See section 7
Chemical stability Product is considered stable and hazardous polymerisation will not occur.
Possibility of
hazardous reactions
See section 7
Conditions to avoid See section 7
Incompatible materials See section 7
Hazardous
decomposition
products
See section 5
SECTION 11 TOXICOLOGICAL INFORMATION
Information on toxicological effects
Inhaled
The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified by EC
Directives using animal models).
Ingestion
May produce laxative effects.
High molecular weight material; on single acute exposure would be expected to pass through gastrointestinal tract with little
change / absorption.
Skin Contact The material is not thought to produce adverse health effects or skin irritation following contact (as classified by EC
Directives using animal models).
Eye
Although the material is not thought to be an irritant (as classified by EC Directives), direct contact with the eye may cause
transient discomfort characterised by tearing or conjunctival redness (as with windburn).
Chronic
Long-term exposure to the product is not thought to produce chronic effects adverse to health (as classified by EC
Directives using animal models); nevertheless exposure by all routes should be minimised as a matter of course.
The material contains a substantial proportion of a polymer considered to be of low concern (PLC).
Studies indicate that diets containing large amounts of non-absorbable polysaccharides, such as cellulose, might decrease
absorption of calcium, magnesium, zinc and phosphorus.
AMC Ezee Pac R
TOXICITY IRRITATION
Not Available Not Available
sodium
carboxymethylcellulose
TOXICITY IRRITATION
Dermal (rabbit) LD50: >2000 mg/kg[2]Nil reported
Inhalation (rat) LC50: >5.8 mg/L/4H[2]
Oral (rat) LD50: 27000 mg/kgd[2]
Legend:1. Value obtained from Europe ECHA Registered Substances - Acute toxicity 2.* Value obtained from manufacturer's SDS.
Unless otherwise specified data extracted from RTECS - Register of Toxic Effect of chemical Substances
SODIUM
CARBOXYMETHYLCELLULOSE Neoplastic by RTECS criteria
Acute Toxicity Carcinogenicity
Skin
Irritation/Corrosion Reproductivity
Serious Eye
Damage/Irritation
STOT - Single
Exposure
Respiratory or Skin
sensitisation
STOT - Repeated
Exposure
Mutagenicity Aspiration Hazard
Chemwatch: 4734-88
Version No: 6.1.1.1
Page 5 of 7
AMC Ezee Pac R
Issue Date: 12/16/2015
Print Date: 04/15/2016
SECTION 12 ECOLOGICAL INFORMATION
Toxicity
Ingredient Endpoint Test Duration (hr)Species Value Source
sodium
carboxymethylcellulose
LC50 96 Fish >20000mg/L 4
Legend:
Extracted from 1. IUCLID Toxicity Data 2. Europe ECHA Registered Substances - Ecotoxicological Information - Aquatic
Toxicity 3. EPIWIN Suite V3.12 - Aquatic Toxicity Data (Estimated) 4. US EPA, Ecotox database - Aquatic Toxicity Data 5.
ECETOC Aquatic Hazard Assessment Data 6. NITE (Japan) - Bioconcentration Data 7. METI (Japan) - Bioconcentration Data
8. Vendor Data
DO NOT discharge into sewer or waterways.
May be harmful to fauna if not disposed of according to Section 13 and legislative requirements. [AMC]
Persistence and degradability
Ingredient Persistence: Water/Soil Persistence: Air
No Data available for all ingredients No Data available for all ingredients
Bioaccumulative potential
Ingredient Bioaccumulation
No Data available for all ingredients
Mobility in soil
Ingredient Mobility
No Data available for all ingredients
SECTION 13 DISPOSAL CONSIDERATIONS
Waste treatment methods
Product / Packaging
disposal
Recycle wherever possible.
SECTION 14 TRANSPORT INFORMATION
Labels Required
Marine Pollutant NO
HAZCHEM Not Applicable
Land transport (ADG): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Air transport (ICAO-IATA / DGR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Sea transport (IMDG-Code / GGVSee): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Transport in bulk according to Annex II of MARPOL and the IBC code
Not Applicable
SECTION 15 REGULATORY INFORMATION
Safety, health and environmental regulations / legislation specific for the substance or mixture
SODIUM CARBOXYMETHYLCELLULOSE(9004-32-4) IS FOUND ON THE FOLLOWING REGULATORY LISTS
Australia Inventory of Chemical Substances (AICS)
National Inventory Status
Australia - AICS Y
Canada - DSL Y
Chemwatch: 4734-88
Version No: 6.1.1.1
Page 6 of 7
AMC Ezee Pac R
Issue Date: 12/16/2015
Print Date: 04/15/2016
Canada - NDSL N (sodium carboxymethylcellulose)
China - IECSC Y
Europe - EINEC /
ELINCS / NLP N (sodium carboxymethylcellulose)
Japan - ENCS Y
Korea - KECI Y
New Zealand - NZIoC Y
Philippines - PICCS Y
USA - TSCA Y
Legend:
Y = All ingredients are on the inventory
N = Not determined or one or more ingredients are not on the inventory and are not exempt from listing(see specific ingredients
in brackets)
SECTION 16 OTHER INFORMATION
Other information
Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the
Chemwatch Classification committee using available literature references.
The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment.
Definitions and abbreviations
PC－TWA: Permissible Concentration-Time Weighted Average
PC－STEL: Permissible Concentration-Short Term Exposure Limit
IARC: International Agency for Research on Cancer
ACGIH: American Conference of Governmental Industrial Hygienists
STEL: Short Term Exposure Limit
TEEL: Temporary Emergency Exposure Limit。
IDLH: Immediately Dangerous to Life or Health Concentrations
OSF: Odour Safety Factor
NOAEL :No Observed Adverse Effect Level
LOAEL: Lowest Observed Adverse Effect Level
TLV: Threshold Limit Value
LOD: Limit Of Detection
OTV: Odour Threshold Value
BCF: BioConcentration Factors
BEI: Biological Exposure Index
This document is copyright.
Chemwatch: 4734-88
Version No: 6.1.1.1
Page 7 of 7
AMC Ezee Pac R
Issue Date: 12/16/2015
Print Date: 04/15/2016

Ciner Resources Corporation • 5 Concourse Parkway • Suite 2500 • Atlanta • Georgia • 30328
770•375•2300

Dense Soda Ash – Technical Grade
(Anhydrous Sodium Carbonate)

Product Specification

Chemical Characteristics

Sodium Carbonate, as Na2CO3 (%) 99.6 min
Sodium Oxide, as Na2O (%) 58.1 min
Sodium Sulfate, as Na2SO4 (ppm) 2,000 max
Sodium Chloride, as NaCl (ppm) 1,000 max
Water Insolubles (ppm) 500 max

Physical Characteristics

Bulk Density Lbs/Ft3 56.0 min
Particle Size Distribution
% Cumulative Retained on U.S. Standard Sieve:
+ 20 mesh (850um) (%) 0.4 max
+ 30 mesh (600um) (%) 8.0 max
+ 100 mesh (150um) (%) 85.0 min
- 200 mesh (75um) (%) 2.0 max

Meets Food Chemical Codex (FCC) and United States Pharmacopeia (USP) standards
Registered to ISO 9001:2008
Kosher, Halal and NSF/ANSI 60 Certified

PRODUCT DATA SHEET (PDS)
PDS-060300-110-TG

PRODUCT: Sodium Acid Pyrophosphate (BALLBUSTER) CODE: 110
GRADE: Technical DATE EFFECTIVE: 29-SEPT-2015
GENERAL DESCRIPTION: White powder

FORMULA: Na2H2P2O7 MOLECULAR WEIGHT: 221.9 CAS NO.: 7758-16-9

CHARACTERISTICS SPECIFICATION LIMITS
Assay (as Na2H2P2O7), % 85.0 Minimum
pH, 1% Solution 4.0 – 5.0
Sizing, USSS:
Retained on 100 Mesh, % 10 Maximum

NOTE: Specification Limits are subject to change from time to time. Please contact us for current data sheet.

Production Location:

Lawrence, Kansas, USA
Packaging: 50 lb. multiwall bags
Shipping Classification: Refer to the current Safety Data Sheet for transport information.
Handling Precautions: Refer to the current Safety Data Sheet for product handling, hazards identification, and first aid
information.

This Product Data Sheet is subject to the terms and conditions on the reverse side hereof.
Issue Date: 09/2015 Doc #: PDS-060300-110-TG Revision: 000 Page 1 of 2
SODIUM ACID PYROPHOSPHATE (SAPP), TECHNICAL GRADE, POWDER

Key Properties:
• Sequestration – The phenomenon of binding metal ions in soluble complexes, thereby preventing the formation of
undesirable precipitates or the occurrence of other detrimental side reactions. SAPP will combine with metal ions
to form soluble but undissociated complexes, which remain in solution in the presence of precipitating anions.
• Buffering – The ability of inorganic phosphates to provide the desired pH level and maintain the proper alkalinity in
solution. Although SAPP is too acidic to show any free alkalinity, it is equal to tetrasodium pyrophosphate in
buffering capacity.
• Deflocculation – the process by which aggregates of particles are broken up into individual particles that are then
dispersed throughout the solution such as the dispersion of clay mixtures in paper coating, drilling muds in oil well
operations, slurries in cement manufacturing, etc..
• Shelf-life ≅ 24 months

Applications:
• Acid Metal Cleaners: Acid metal cleaners are generally used in the removal of mill scale, rust and other
metallic oxides or to remove traces of alkaline residues. SAPP is effective in dry cleaner formulations
where mild “controlled” acidity is advantageous and cleaning requirements are less demanding.
• Iron Phosphatizing: SAPP is commonly used in cleaner/phosphatizing formulations to reduce the
formation of sludge. Control of sludge effectively extends the life of a phosphatizing bath.
• Drilling Muds: In oil well operations, SAPP is used to treat water-based drilling muds to produce high
density fluids with specific flow properties.
• Dairy Cleaners: Dry formulated products containing SAPP provide mildly acidic solutions, which are
useful in dairy operations to remove “milkstone.”
• Pigment Dispersant: Condensed phosphate deflocculants are used in water-base paints to aid in the
wetting and even dispersion of pigments in formulating the final product.
• Potable Water Treatment: ICL Performance Products LP sodium acid pyrophosphate conforms to the
requirements of ANSI/NSF Standard 60. Used for corrosion & scale control and sequestering.
Maximum Use Level= 12mg/L.

FOR MORE COMPLETE INFORMATION ON PROPERTIES AND SAFE HANDLING OF THIS MATERIAL, SEE THE ICL
PERFORMANCE PRODUCTS LP SAFETY DATA SHEET (SDS).
NOTICE: The information and recommendations set forth herein (the "Information") are presented in good faith and believed to be correct as of the date hereof.
HOWEVER, NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, FOR COMPLETENESS, ACCURACY, MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO THE
INFORMATION OR THE PRODUCT TO WHICH THIS INFORMATION REFERS. In no event will ICL Performance Products LP or its affiliates be responsible
for damages of any nature whatsoever resulting from the use of or reliance upon the Information or the product to which the Information refers. Nothing contained
herein is to be construed as a recommendation to use any product, process, equipment or formulation in conflict with any patent. The Information set forth herein are
based on samples tested and are not guaranteed for all samples or applications nor do they reflect product specifications for any particular product.
ICL ADVANCED ADDITIVES (A DIVISION OF ICL PERFORMANCE PRODUCTS LP)
Corporate Offices:
622 Emerson Road, Suite 500
St. Louis, Missouri 63141
314-983-7500
© 2015 ICL Performance Products, LP

For order assistance, please call our Customer Service Department Toll Free: 1-800-244-6169

Issue Date: 09/2015 Doc #: PDS-060300-110-TG Revision: 000 Page 2 of 2
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Identification
Product Name: SODIUM ACID PYROPHOSPHATE
Reference Number: AST10051
Date: May 19, 2015
Synonyms: SAPP; Pyrophosphate Acid, Disodium Salt; Disodium Dihydrogen
Pyrophosphate
Use of substance or preparation
Food ingredient, buffer, sequestrate, deflocculate, peptizing agent in cheese and meat products,
dairy cleaners, drilling mud, metal cleaning and phosphatizing.
Company/Undertaking Identification
ICL PERFORMANCE PRODUCTS LP
622 Emerson Road - Suite 500
St. Louis, Missouri 63141
Emergency telephone: In USA call CHEMTREC: 1-800-424-9300
In Canada call CANUTEC: 1-613-996-6666
General Information: 1-800-244-6169 (Worldwide)
2. HAZARDS IDENTIFICATION
Classification of the substance/preparation
GHS
Warning
GHS07
Eye Irrit. 2 H319 Causes serious eye irritation.
H319 Causes serious eye irritation.
Prevention:
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P264 Wash thoroughly after handling.
Response:
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes.Remove contact
lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
Safety Data Sheet
ICL Performance Products LP Safety Data Sheet
Material: Sodium Acid Pyrophosphate Page 2 of 6
Reference No.: AST10051 May 19, 2015
3. COMPOSITION/INFORMATION ON INGREDIENTS
Composition
Substance CAS No. EINECS No %w/w
Sodium Acid Pyrophosphate 7758-16-9 231-835-0 100
4. FIRST AID MEASURES
General
Treatment is symptomatic and supportive.
Eye contact
Rinse immediately with plenty of water. If easy to do, remove any contact lenses. Get medical
attention if irritation occurs and persists. Remove contaminated clothing. Remove material from
eyes, skin and clothing. Wash clothing before reuse.
Skin contact
Remove this material with plenty of soap and water. Contact with the dry material may cause
drying, or chapping, redness or burning of the skin.
Inhalation
Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult,
give oxygen. Inhalation of the dust may cause coughing and sneezing.
Ingestion
If swallowed, do NOT induce vomiting. Rinse mouth with plenty of water and get medical
attention. Contact a Poison Control Center. Never give anything by mouth to an unconscious
person.
5. FIRE FIGHTING MEASURES
Extinguishing media
Non-combustible. No special requirement.
Unsuitable extinguishing media
Non-combustible. No special requirement.
Exposure hazards
No special considerations.
Protective equipment
As a general precaution, firefighters, and others exposed, wear self-contained breathing
apparatus.
6. ACCIDENTAL RELEASE MEASURES
ICL Performance Products LP Safety Data Sheet
Material: Sodium Acid Pyrophosphate Page 3 of 6
Reference No.: AST10051 May 19, 2015
Personal precautions
No special requirement.
Environmental precautions
Small quantities: Presents no environmental problems.
Large quantities: As general precaution, avoid discharge into the environment.
Methods for cleaning up
Sweep, scoop or vacuum and place into containers for disposal. Flush area with water.
Refer to Section 13 for disposal information and Sections 14 and 15 for reportable quantity
information.
7. HANDLING AND STORAGE
Handling
Avoid breathing dust.
Keep container closed.
Use only with adequate ventilation.
Avoid contact with eyes and skin.
Wash thoroughly after handling.
Do not taste or swallow.
Engineering measures
Provide natural or mechanical ventilation to minimize exposure. The use of local mechanical
exhaust ventilation is preferred at sources of air contamination such as open process equipment.
Consult National Fire Protection Association (NFPA) Standard 91 for design of exhaust systems.
Storage
Store in a cool, dry place to maintain product performance. Emptied container retains product
residue. Observe all labeled safeguards until container is cleaned, reconditioned, or destroyed.
The reuse of this material’s container for non-industrial purposes is prohibited and any reuse must
be in consideration of the data provided in this MSDS.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational exposure limit
OSHA and ACGIH have not established specific exposure limits for this material. However,
OSHA and ACGIH have established limits for particulates not otherwise regulated (PNOR) and
particulates not otherwise classified (PNOC) which are the least stringent exposure limits
applicable to dusts.
ACGIH TLV 10 mg/m
3 (inhalable) 8-hr TWA, 3 mg/m3 (respirable) 8-hr TWA
OSHA PEL 15 mg/m
3 (total dust) 8-hr TWA, 5 mg/m3 (respirable) 8-hr TWA
Components referred to herein may be regulated by specific Canadian provincial legislation.
Please refer to exposure limits legislated for the province in which the substance will be used.
Respiratory protection
Avoid breathing dust. In case of insufficient ventilation, wear suitable respiratory equipment. Use
NIOSH/MSHA approved respiratory protection equipment when airborne exposure limits are
exceeded. Consult the respirator manufacturer to determine appropriate type equipment for a
ICL Performance Products LP Safety Data Sheet
Material: Sodium Acid Pyrophosphate Page 4 of 6
Reference No.: AST10051 May 19, 2015
given application. Observe respirator use limitations specified by NIOSH/MSHA or the
manufacturer. Use approved respiratory protective equipment as described in the U.S. OSHA 29
CFR 1910.134 or European Standard EN149.
Hand/skin protection
Wearing protective clothes is recommended; wash hand and contaminated skin thoroughly after
handling.
Eye protection
Wear appropriate protective eyeglasses or chemical safety goggles as described in the U.S.
OSHA 29 CFR 1910.133 or European Standard EN 166.
9. PHYSICAL AND CHEMICAL PROPERTIES
a) Appearance: White powder free flowing
b) Odor: None
c) Odor threshold: Undetermined.
d) pH: (as a 1% solution): 4.0-5.0
e) Melting point/freezing point: Decomposes between 250 – 275
oC (482-527 oF) to
polyphosphates, which melt between 600 - 650
oC (1112-1202 oF)
f) Initial boiling point and boiling range: Undetermined.
g) Flash point: Undetermined
h) Evaporation rate: Undetermined.
i) Flammability (solid, gas) : Undetermined.
j) Upper/lower flammability or explosive limits: Undetermined.
k) Vapor pressure: Undetermined.
l) Vapor density: Undetermined.
m) Relative density: 0.8 – 1.33 g/cc
n) Solubility(ies) : (g/100g H2O): 5 @ 0 °C
12.5 @ 25 °C
20 @ 50 °C
65 @ 75 °C
o) Partition coefficient: n-octanol/water: Undetermined.
p) Auto-ignition temperature: Undetermined.
q) Decomposition temperature: Undetermined.
r) Viscosity: Undetermined.
Chemical Formula: Na2 H2P2O7
NOTE: These physical data are typical values based on material tested but may vary from sample
to sample. Typical values should not be construed as a guaranteed analysis of any specific lot or
as specifications for the product.
10. STABILITY AND REACTIVITY
Product is stable under normal conditions of storage and handling.
Conditions to avoid
None known.
Materials to avoid
Strong mineral acids.
ICL Performance Products LP Safety Data Sheet
Material: Sodium Acid Pyrophosphate Page 5 of 6
Reference No.: AST10051 May 19, 2015
Hazardous decomposition products
None known.
11. TOXICOLOGICAL INFORMATION
The dry powder may cause foreign body irritation in some individuals. Prolonged contact with the
dry powder may cause drying or chapping of the skin. Workers exposed to dust of this product
reported moderate irritation of the nose and throat, with five of the eighteen workers reporting
nasal stuffiness and nosebleeds. High dust concentrations were reported to cause mild eye and
skin irritation.
Laboratory data
Data from ICL Performance Products LP single-dose (acute) animal studies with this material are
given below:
Oral - rat LD50 - 3,600 mg/kg; slightly toxic
Dermal - rabbit LD50: > 7,940 mg/kg; practically non-toxic
Eye Irritation - rabbit: 66.5/110; severely irritating
Skin Irritation - rabbit: 0.7/8.0; slightly irritating
Inhalation - LC50>0.58 mg/l, 4 hr (rat) - maximum attainable concentration
No birth defects were reported in mice, hamsters, or rabbits given sodium acid pyrophosphate
during pregnancy. No adverse genetic effects were reported in standard tests using animals or
bacterial and yeast cells.
12. ECOLOGICAL INFORMATION
Environmental Toxicity
ICL Performance Products LP has not conducted environmental toxicity studies with this product.
Environmental Fate
Inorganic compounds in contact with the soil, sub-surface or surface waters may be taken up by
plants and utilized as essential nutrients. Phosphates may also form precipitates, usually with
calcium or magnesium. The resultant compounds are insoluble in water and become a part of the
soil or sediment. The term biodegradability, as such, is not applicable to inorganic compounds.
13. DISPOSAL CONSIDERATIONS
This material when discarded is not a hazardous waste as that term is defined by the U.S.
Resource, Conservation and Recovery Act (RCRA), 40 CFR 261. Dry material may be land filled
or recycled in accordance with local, state and federal regulations. Consult your attorney or
appropriate regulatory officials for information on such disposal.
14. TRANSPORT INFORMATION
The data provided in this section is for information only. Please apply the appropriate regulations
to properly classify your shipment for transportation.
Road/Rail, Sea and Air
IMDG/UN Not regulated for transport
ICAO/IATA Not regulated for transport
RID/ADR Not regulated for transport
Canadian TDG Not regulated for transport
U.S. DOT Not regulated for transport
ICL Performance Products LP Safety Data Sheet
Material: Sodium Acid Pyrophosphate Page 6 of 6
Reference No.: AST10051 May 19, 2015
15. REGULATORY INFORMATION
Chemical Inventory
USA TSCA: Listed
Canada DSL: Listed
EC: Listed
Additional information
Germany: WGK = 1
WHMIS Classification: D2 (B) – Materials Causing Other Toxic Effects
SARA Hazard Notification
Hazard Categories Under Title III Rules (40 CFR 370): Immediate
Section 302 Extremely Hazardous Substances: None
Section 313 Toxic Chemical(s): None
CERCLA Reportable Quantity: Not applicable
This product has been classified in accordance with the hazard criteria of the Canadian Controlled
Products Regulation and the MSDS contains all the information required by the Canadian
Controlled Products Regulation.
16. OTHER INFORMATION
Health Fire Reactivity Additional Information
Suggested NFPA Rating 2 0 0
Suggested HMIS Rating 2 0 0 J
J = Splash goggles, gloves, synthetic
apron, dust & vapor respirator
Reason for revision: Revised section 1 and 9. Supersedes MSDS dated: March 11, 2013
Responsible Care ® is a registered trademark of the American Chemistry Council.
Although the information and recommendations set forth herein (hereinafter “Information”) are
presented in good faith and believed to be correct as of the date hereof, ICL Performance
Products LP makes no representations as to the completeness or accuracy thereof. Information
is supplied upon the condition that the persons receiving same will make their own determination
as to its suitability for their purposes prior to use. In no event will ICL Performance Products LP
be responsible for damages of any nature whatsoever resulting from the use of or reliance upon
information. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED,
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER
NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT
TO WHICH INFORMATION REFERS
AST10051.4070.doc
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 1 of 8

SAFETY DATA SHEET
according to Regulation (EC) No. 453/2010

MAGMA FIBER COARSE ®

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF
THE COMPANY/UNDERTAKING

1.1 Product Identifier
Product Name MAGMA FIBER COARSE®

1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended Use Viscosifier
Sector of Use SU2 - Mining, (including offshore industries)
Product Category PC20 - Products such as pH-regulators, flocculants,
precipitants, neutralization agents, other unspecific
Process Categories PROC 26 - Handling of solid inorganic substances at ambient
temperature

1.3 Details of the supplier of the safety date sheet
Lost Circulation Specialists, Inc.
14011 Park Dr. Suite 103
Tomball, TX 77377-2127

1.4 Emergency Telephone Number
[phone]

2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
REGULATION (EC) No 1272/2008
Not classified
Classification according to EU Directives 67/548/EEC or 1999/45/EC

2.2 Label Elements
Not Classified

Hazard Pictograms

Signal Word None

Hazard Statements
Not Classified
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 2 of 8

Precautionary Statements – EU (§28, 1272/2008)
Not Classified

Contains
Substances CAS Number
Contains no hazardous substances Mixture

2.3 Other Hazards
None known

3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances EINECS CAS
Number
Percent
(w/w)
EEC
Classification
EU – CLP
Substance
Classification
REACH
No.
Contains no
hazardous
substances
Not
applicable
Mixture 60 – 100% Not
applicable
Not
applicable
No data
available

4. FIRST AID MEASURES

4.1 Description of first aid measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention
if respiratory irritation develops or if breathing becomes
difficult.
Eyes In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes and get medical attention if irritation
persists.
Skin Wash with soap and water. Get medical attention if irritation
persists.
Ingestion Under normal conditions, first aid procedures are not required.

4.2 Most Important symptoms and effects, both acute and delayed
No significant hazards expected. May cause mild eye, skin, and respiratory irritation.

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician Treat symptomatically

5. FIREFIGHTING MEASURES
5.1 Extinguishing media
Suitable Extinguishing Media
All standard fire fighting media

Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 3 of 8

Extinguishing media which must not be used for safety reasons
None known.

5.2 Special hazards arising from the substance or mixture
Special Exposure Hazards
Not applicable.

5.3 Advice to firefighters
Special Protective Equipment for Fire-Fighters
Full protective clothing and approved self-contained breathing apparatus required for fire fighting
personnel.

6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Use appropriate protective equipment
See section 8 for additional information

6.2 Environmental precautions
None known.

6.3 Methods and material for containment and cleaning up
Scoop up and remove

6.4 Reference to other sections
See section 8 and 13 for additional information.

7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Avoid contact with eyes, skin, or clothing.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice

7.2 Conditions for safe storage, including any incompatibilities
Store in a dry location

7.3 Specific End Use(s)
Exposure Scenario No information available
Other Guidelines No information available

Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 4 of 8

8. Exposure Controls/Personal Protection
8.1 Control Parameters
Exposure Limits
Substances CAS Number EU UK OEL Netherlands France OEL
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Germany
MAK/TRK
Spain Portugal Finland
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Austria Ireland Switzerland Norway
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Italy Poland Hungary Czech
Republic
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Denmark
Contains no hazardous
substances
Mixture Not applicable

Derived No Effect Level (DNEL) No information available.
Worker

General Population

Predicted No Effect Concentration (PNEC) No information available

8.2 Exposure Controls
Engineering Controls Use in a well ventilated area.
Personal protective equipment
Respiratory Protection Not normally needed. But if significant exposures are possible
then the following respirator is recommended:
Dust/mist respirator. (N95, P2/P3)

Hand Protection Normal work gloves.
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 5 of 8

Skin Protection Normal work coveralls.
Eye Protection Wear safety glasses or goggles to protect against exposure.
Other Precautions Not known
Environmental Exposure Controls No information available.

9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties
Physical State: fibers Color: White to gray
Odor: odorless Odor Threshold: No information available

Property Values
Remarks/ - Method
pH: No data available
Feezing Point/Range No data available
Melting Point/Range No data available
Boiling Point/Range No data available
Flash Point No data available
Evaporation Rate No data available
Vapor Pressure No data available
Vapor Density No data available
Specific Gravity 2.6
Water Solubility Insoluble in water
Solubolity in other Solvents No data available
Partition coefficient: n-octanol/water No data available
Autoignition Temperature No data available
Decomposition Temperature No data available
Viscocity No data available
Explosive Properties No information available
Oxidizing Properties No information available

9.2 Other Information
VOC Content (%) No data available

10. STABILITY AND REACTIVITY

10.1 Reactivity
Not applicable
10.2 Chemical Stability
Stable
10.3 Possibility of Hazardous Reactions
Will Not Occur
10.4 Conditions to Avoid
None anticipated
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 6 of 8

10.5 Incompatible Materials
Strong acids
10.6 Hazardous Decomposition Products
Carbon monoxide and carbon dioxide

11. TOXICOLOGICAL INFORMATION

11.1 Information on Toxicological Effects
Acute Toxicity
Inhalation May cause respiratory irritation.
Eye Contact May cause mechanical irritation to eye.
Skin Contact May cause mechanical skin irritation.
Ingestion None known.
Chronic Effects/Carcinogenicity No data available to indicate product or components
present at greater than 1% are chronic health hazards
Toxicology data for the components
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Contains no
hazardous
substances
Mixture No data available No data available No data available

12. EXOLOGICAL INFORMATION

12.1 Toxicity
Ecotoxicity Effects

Substances CAS
Number
Toxicity to Algae Toxicity to
Fish
Toxicity to
Microorganism
s
Dapnia
Magna
(Water
Flea)
Contains no
hazardous
substances
Mixture No information
available
No information
available
No information
available
No
information
available

12.2 Persistence and degradability
The methods for determining biodegradability are not applicable to inorganic substances.

12.3 Bioaccumulative potential
No information available

12.4 Mobility in soil
No information available
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 7 of 8

12.5 Results of PBT and vPvB assessment
No information available.

12.6 Other adverse effects
Endocrine Disruptor Information
This product does not contain any known or suspected endocrine disruptors

13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods
Disposal Method Bury in a licensed landfill according to federal, state, and local
regulations.
Contaminated Packaging Follow all applicable national or local regulations.

14. TRANSPORT INFORMATION

IMDG/IMO
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

RID
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

ADR
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

IATA/ICAO
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

Special Precautions for User None
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 8 of 8

Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not
applicable

15. REGULATORY INFORMATION

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

International Inventories
All of the components in the product are on the following Inventory lists:
EINECS Inventory This product, and all its components, complies with EINECS
US TSCA Inventory All components listed on inventory or are exempt.
Canadian DSL Inventory All components listed on inventory or are exempt.

Legend
TSCA - United States Toxic Substances Control Act Section 8(b) Inventory
EINECS/ELINCS - European Inventory of Existing Commercial Chemical Substances/EU List of
Notified Chemical Substances
DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List

Germany, Water Endangering Classes (WGK) WGK 0: Generally not water endangering

15.2 Chemical Safety Assessment
No information available

16. Other Information

Full text of R-phrases referred to under Sections 2 and 3

None

Key literature references and sources for data
www.ChemADVISOR.com/

Revision Date: 03-Aug-2017

Revision Note
Not applicable

This safety data sheet complies with the requirements of Regulation (EC) No. 453/2010

Disclaimer Statement
This information is furnished without warranty, expressed or implied, as to accuracy or
completeness. The information is obtained from various sources including the manufacturer and
other third party sources. The information may not be valid under all conditions nor if this material
is used in combination with other materials or in any process. Final determination of suitability of
any material is the sole responsibility of the user.
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 1 of 8

SAFETY DATA SHEET
according to Regulation (EC) No. 453/2010

MAGMA FIBER FINE ®

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF
THE COMPANY/UNDERTAKING

1.1 Product Identifier
Product Name MAGMA FIBER FINE®

1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended Use Viscosifier
Sector of Use SU2 - Mining, (including offshore industries)
Product Category PC20 - Products such as pH-regulators, flocculants,
precipitants, neutralization agents, other unspecific
Process Categories PROC 26 - Handling of solid inorganic substances at ambient
temperature

1.3 Details of the supplier of the safety date sheet
Lost Circulation Specialists, Inc.
14011 Park Dr. Suite 103
Tomball, TX 77377-2127

1.4 Emergency Telephone Number
[phone]

2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
REGULATION (EC) No 1272/2008
Not classified
Classification according to EU Directives 67/548/EEC or 1999/45/EC

2.2 Label Elements
Not Classified

Hazard Pictograms

Signal Word None

Hazard Statements
Not Classified
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 2 of 8

Precautionary Statements – EU (§28, 1272/2008)
Not Classified

Contains
Substances CAS Number
Contains no hazardous substances Mixture

2.3 Other Hazards
None known

3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances EINECS CAS
Number
Percent
(w/w)
EEC
Classification
EU – CLP
Substance
Classification
REACH
No.
Contains no
hazardous
substances
Not
applicable
Mixture 60 – 100% Not
applicable
Not
applicable
No data
available

4. FIRST AID MEASURES

4.1 Description of first aid measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention
if respiratory irritation develops or if breathing becomes
difficult.
Eyes In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes and get medical attention if irritation
persists.
Skin Wash with soap and water. Get medical attention if irritation
persists.
Ingestion Under normal conditions, first aid procedures are not required.

4.2 Most Important symptoms and effects, both acute and delayed
No significant hazards expected. May cause mild eye, skin, and respiratory irritation.

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician Treat symptomatically

5. FIREFIGHTING MEASURES
5.1 Extinguishing media
Suitable Extinguishing Media
All standard fire fighting media

Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 3 of 8

Extinguishing media which must not be used for safety reasons
None known.

5.2 Special hazards arising from the substance or mixture
Special Exposure Hazards
Not applicable.

5.3 Advice to firefighters
Special Protective Equipment for Fire-Fighters
Full protective clothing and approved self-contained breathing apparatus required for fire fighting
personnel.

6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Use appropriate protective equipment
See section 8 for additional information

6.2 Environmental precautions
None known.

6.3 Methods and material for containment and cleaning up
Scoop up and remove

6.4 Reference to other sections
See section 8 and 13 for additional information.

7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Avoid contact with eyes, skin, or clothing.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice

7.2 Conditions for safe storage, including any incompatibilities
Store in a dry location

7.3 Specific End Use(s)
Exposure Scenario No information available
Other Guidelines No information available

Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 4 of 8

8. Exposure Controls/Personal Protection
8.1 Control Parameters
Exposure Limits
Substances CAS Number EU UK OEL Netherlands France OEL
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Germany
MAK/TRK
Spain Portugal Finland
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Austria Ireland Switzerland Norway
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Italy Poland Hungary Czech
Republic
Contains no
hazardous
substances
Mixture Not applicable Not applicable Not applicable Not applicable

Substances CAS Number Denmark
Contains no hazardous
substances
Mixture Not applicable

Derived No Effect Level (DNEL) No information available.
Worker

General Population

Predicted No Effect Concentration (PNEC) No information available

8.2 Exposure Controls
Engineering Controls Use in a well ventilated area.
Personal protective equipment
Respiratory Protection Not normally needed. But if significant exposures are possible
then the following respirator is recommended:
Dust/mist respirator. (N95, P2/P3)

Hand Protection Normal work gloves.
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 5 of 8

Skin Protection Normal work coveralls.
Eye Protection Wear safety glasses or goggles to protect against exposure.
Other Precautions Not known
Environmental Exposure Controls No information available.

9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties
Physical State: fibers Color: White to gray
Odor: odorless Odor Threshold: No information available

Property Values
Remarks/ - Method
pH: No data available
Feezing Point/Range No data available
Melting Point/Range No data available
Boiling Point/Range No data available
Flash Point No data available
Evaporation Rate No data available
Vapor Pressure No data available
Vapor Density No data available
Specific Gravity 2.6
Water Solubility Insoluble in water
Solubolity in other Solvents No data available
Partition coefficient: n-octanol/water No data available
Autoignition Temperature No data available
Decomposition Temperature No data available
Viscocity No data available
Explosive Properties No information available
Oxidizing Properties No information available

9.2 Other Information
VOC Content (%) No data available

10. STABILITY AND REACTIVITY

10.1 Reactivity
Not applicable
10.2 Chemical Stability
Stable
10.3 Possibility of Hazardous Reactions
Will Not Occur
10.4 Conditions to Avoid
None anticipated
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 6 of 8

10.5 Incompatible Materials
Strong acids
10.6 Hazardous Decomposition Products
Carbon monoxide and carbon dioxide

11. TOXICOLOGICAL INFORMATION

11.1 Information on Toxicological Effects
Acute Toxicity
Inhalation May cause respiratory irritation.
Eye Contact May cause mechanical irritation to eye.
Skin Contact May cause mechanical skin irritation.
Ingestion None known.
Chronic Effects/Carcinogenicity No data available to indicate product or components
present at greater than 1% are chronic health hazards
Toxicology data for the components
Substances CAS Number LD50 Oral LD50 Dermal LC50 Inhalation
Contains no
hazardous
substances
Mixture No data available No data available No data available

12. EXOLOGICAL INFORMATION

12.1 Toxicity
Ecotoxicity Effects

Substances CAS
Number
Toxicity to Algae Toxicity to
Fish
Toxicity to
Microorganism
s
Dapnia
Magna
(Water
Flea)
Contains no
hazardous
substances
Mixture No information
available
No information
available
No information
available
No
information
available

12.2 Persistence and degradability
The methods for determining biodegradability are not applicable to inorganic substances.

12.3 Bioaccumulative potential
No information available

12.4 Mobility in soil
No information available
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 7 of 8

12.5 Results of PBT and vPvB assessment
No information available.

12.6 Other adverse effects
Endocrine Disruptor Information
This product does not contain any known or suspected endocrine disruptors

13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods
Disposal Method Bury in a licensed landfill according to federal, state, and local
regulations.
Contaminated Packaging Follow all applicable national or local regulations.

14. TRANSPORT INFORMATION

IMDG/IMO
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

RID
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

ADR
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

IATA/ICAO
UN Number: Not restricted
UN Proper Shipping Name: Not restricted
Transport Hazard Class(es): Not applicable
Packing Group: Not applicable
Environmental Hazards: Not applicable

Special Precautions for User None
Lost Circulation Specialists, Inc.
MAGMA FIBER The Acid Soluble LCM
Page 8 of 8

Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not
applicable

15. REGULATORY INFORMATION

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

International Inventories
All of the components in the product are on the following Inventory lists:
EINECS Inventory This product, and all its components, complies with EINECS
US TSCA Inventory All components listed on inventory or are exempt.
Canadian DSL Inventory All components listed on inventory or are exempt.

Legend
TSCA - United States Toxic Substances Control Act Section 8(b) Inventory
EINECS/ELINCS - European Inventory of Existing Commercial Chemical Substances/EU List of
Notified Chemical Substances
DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List

Germany, Water Endangering Classes (WGK) WGK 0: Generally not water endangering

15.2 Chemical Safety Assessment
No information available

16. Other Information

Full text of R-phrases referred to under Sections 2 and 3

None

Key literature references and sources for data
www.ChemADVISOR.com/

Revision Date: 03-August-2017

Revision Note
Not applicable

This safety data sheet complies with the requirements of Regulation (EC) No. 453/2010

Disclaimer Statement
This information is furnished without warranty, expressed or implied, as to accuracy or
completeness. The information is obtained from various sources including the manufacturer and
other third party sources. The information may not be valid under all conditions nor if this material
is used in combination with other materials or in any process. Final determination of suitability of
any material is the sole responsibility of the user.
Page 1 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE
Soda Ash / Sodium Carbonate
                               Revision Date: 4/21/2017 
SAFETY DATA SHEET
1 PRODUCT AND COMPANY IDENTIFICATION       
1.1 PRODUCT IDENTIFIERS 
Product Name: Soda Ash or Sodium Carbonate
Chemical Name: Sodium Carbonate
Synonyms / Common Names: Carbonic Acid Sodium Salt
Registration Number REACH: 01-2119485498-19-0011
Product Type REACH: Substance/mono-constituent
CAS Number: 497-19-8
EC Index Number: 011-005-00-2
EC Number: 207-838-8
RTECS Number: V Z4050000
1.2 RELEVANT IDENTIFIED USES 
Glass production Paper production Manufacture of substances
Detergent component Laboratory chemicals Acidity regulator
1.3 MANUFACTURER 
Ciner Wyoming LLC
254 County Road 4-6
Green River, Wyoming 82935
United States
Telephone Number: [phone]
www.ciner.us.com
1.4 EMERGENCY TELEPHONE NUMBER 
Emergency Response Information Provider: CHEMTREC
Within the United States Emergency Telephone Number: 1-800-424-9300

Outside the United States / International Emergency Telephone Number: [phone]

Page 2 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE

2 HAZARD(S) IDENTIFICATION 
2.1 CLASSIFICATION OF THE SUBSTANCE OR MIXTURE 
GHS Classification in accordance with 29 CFR 1910 (OSHA HazCom Standard):
Eye Irritation (Category 2A), H319
For the full text of the H-Statements mentioned in this Section, see Section 16.

2.2 GHS LABEL ELEMENTS, INCLUDING PRECAUTIONARY STATEMENTS 
Pictograms:

               Irritant   

Signal Word: Warning

Hazard Statement(s):
H319 Causes serious eye irritation.
Precautionary Statement(s):
P264 Wash skin thoroughly after handling.
P280 Wear eye protection / face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice / attention.
2.3 HAZARDS NOT OTHERWISE CLASSIFIED OR NOT COVERED BY GHS 
None

3 COMPOSITION / INFORMATION ON INGREDIENTS 
3.1 SUBSTANCES 
Synonyms: Soda Ash, Sodium Carbonate, Carbonic Acid Sodium Salt
Formula: Na2CO3
Page 3 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE
Molecular Weight: 105.99 g/mol
Component
(REACH Registration)
CAS # / EC # Concentration Classifications Remark

Sodium carbonate

(01-2119485498-19-
0011)

CAS #: 497-19-8

EC #: 207-838-8

 99%

Eye Irrit. 2A, H319

Mono-
constituent

* For the full text of the H-Statements mentioned in this Section, see Section 16.

4 FIRST‐AID MEASURES 
4.1 DESCRIPTION OF FIRST‐AID MEASURES 
General - Check the vital functions. Unconscious: maintain adequate airway and respiration.
Respiratory arrest: artificial respiration or oxygen. Cardiac arrest: perform resuscitation. Victim
conscious with labored breathing: half-seated. Victim in shock: on his back with legs slightly
raised. Vomiting: prevent asphyxia/aspiration pneumonia. Prevent cooling by covering the victim
(no warming up). Keep watching the victim. Give psychological aid. Keep the victim calm, avoid
physical strain. Depending on the victim's condition: doctor/hospital.
After inhalation - Remove the victim into fresh air. Respiratory problems: consult a doctor/medical
service.
After skin contact - Rinse with water. Soap may be used. Do not apply (chemical) neutralizing
agents. Take victim to a doctor if irritation persists.
After eye contact - Rinse immediately with plenty of water for at least 15 minutes. Do not apply
neutralizing agents. Take victim to an ophthalmologist if irritation persists.
After ingestion - Rinse mouth with water. Immediately after ingestion: give lots of water to drink.
Do not induce vomiting. Consult a doctor/medical service if victim is unwell.
4.2 MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED  
4.2.1 Acute Symptoms
If inhaled - Dry/sore throat. Coughing. Slight irritation. Exposure to high concentrations:
Irritation of the respiratory tract. Irritation of the nasal mucous membranes. Respiratory
difficulties.
In case of skin contact - Not irritating
In case of eye contact - Inflammation/damage of the eye tissue. Corrosion of the eye tissue.
Lacrimation.
If swallowed – After absorption of high quantities: Nausea. Vomiting. Abdominal pain. Irritation
of the gastric/intestinal mucosa.
4.2.2 Delayed Symptoms
No effects known.
4.3 INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED  
No data available.
Page 4 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE

5 FIRE‐FIGHTING MEASURES 
5.1 EXTINGUISHING MEDIA 
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE  
Upon combustion CO and CO2 are formed. Reacts on exposure to water with some metals. CO2
generation occurs when mixed with acidic materials.
5.3 ADVICE FOR FIREFIGHTERS  
Wear self‐contained breathing apparatus for firefighting if necessary. 
5.4 SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS 
Gloves. Safety glasses. Protective clothing. Dust cloud protection and heat/fire exposure:
Compressed air respirator.

6 ACCIDENTAL RELEASE MEASURES 
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES 
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas.
Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal
protection see section 8.
6.2 ENVIRONMENTAL PRECAUTIONS 
Contain released substance, pump into suitable containers. Plug the leak, cut off the supply.
Knock down/dilute dust cloud with water spray. Violent exothermic reaction with some acids;
release of harmful gases/vapors (carbon dioxide). Carbon dioxide is heavier than air and will
collect in ducts, drains and low lying areas. Prevent spreading in sewers.
6.3 METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP 
Prevent dust cloud formation. Scoop solid spill material into closed containers. Carefully collect the
spill. Clean contaminated surfaces with an excess of water. Wash clothing and equipment after
handling.
6.4 REFERENCE TO OTHER SECTIONS 
For disposal see section 13.

Page 5 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE

7 HANDLING AND STORAGE 
7.1 PRECAUTIONS FOR SAFE HANDLING 
Avoid contact with skin and eyes. Use air conveying/mechanical systems for bulk transfer to
storage. Provide appropriate exhaust ventilation at places where dust is formed. In case of
insufficient ventilation, wear suitable respiratory equipment if release of airborne dust is expected.
7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES  
Store in original container. Keep in properly labeled containers. Keep container tightly closed.
7.3 SUITABLE PACKAGING MATERIAL 
No data available
7.4 INCOMPATIBLE PRODUCTS 
Aluminum, powdered aluminum, and acids.

8 EXPOSURE CONTROLS / PERSONAL PROTECTION 
8.1 COMPONENTS WITH WORKPLACE CONTROL PARAMETERS 
Contains no substances with occupational exposure limit values.
8.2 EXPOSURE CONTROLS  
Appropriate engineering controls – Avoid formation of dust. Keep away from ignition sources.
Keep container tightly closed. Handle in accordance with good industrial hygiene and safety
practice. Wash hands before breaks and at the end of workday.
8.3 PERSONAL PROTECTIVE EQUIPMENT 
Eye / Face Protection - Safety glasses with side shields or protective goggles. Use equipment for
eye protection tested and approved under appropriate government standards such as NIOSH (US)
or EN 166(EU).
Skin protection - Handle with gloves, butyl rubber or PVC, which have good resistance. Gloves
must be inspected prior to use. Use proper glove removal technique to avoid skin contact with
product. Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands.
Body Protection – Protective clothing. The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection – For nuisance exposures use type P95 (US) or type P1 (EU EN 143)
particle respirator. For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN
143) respirator cartridges. Use respirators and components tested and approved under
appropriate government standards such as NIOSH (US) or CEN (EU).
Page 6 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE
8.4 CONTROL OF ENVIRONMENTAL EXPOSURE 
Prevent leakage or spillage if safe to do so. Do not let product enter drains. See section 6.2, 6.3,
and 13.

9 PHYSICAL AND CHEMICAL PROPERTIES 
9.1 INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES 

Appearance Form: Crystalline Solid / Crystalline Powder / Grains /
Lumps
Color: Color less
Odor: Odorl ess
Odor Threshold: No data available
Particle Size: 694 µm
pH: 11.6; 5.0%
Melting Point / Freezing Point: 851 °C / 1,564 °F
Boiling Point 1,600 °C / 2,912 °F
Flash Point: No data available
Explosion Limits: No data available
Evaporation Rate: No data available
Flammability: No n Combustible
Log Kow: -6.19 Estimated value
Viscosity: No data available
Vapor Pressure: No data available
Vapor Density: No data available
Solubility water: 212.5 g/l; 20 °C / 68 °F
Relative Density: 2.52 -2.53; 20 °C / 68 °F
Absolute Density: 2,530 kg/m3
Decomposition temperature: >1600 °C / >2912 °F
Auto-ignition temperature: >400 °C / >752 °F
Explosive Properties: No data available
Oxidizing Properties: No data available
9.2 PHYSICAL HAZARDS 
No data available

10 STABILITY AND REACTIVITY 
10.1 REACTIVITY 
None under normal use conditions.
10.2 CHEMICAL STABILITY 
Stable. Decomposes by reaction with strong acid.
10.3 POSSIBILITY OF HAZARDOUS REACTIONS 
None under normal processing.
Page 7 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE
10.4 CONDITIONS TO AVOID 
Exposure to air or moisture over prolonged periods.
10.5 INCOMPATIBLE MATERIALS 
Aluminum, powdered aluminum, and acids.
10.6 HAZARDOUS POLYMERIZATION 
Hazardous polymerization does not occur.

11 TOXICOLOGICAL INFORMATION 
11.1 INFORMATION ON TOXICOLOGICAL EFFECTS 
11.1.1 Acute toxicity
LD50 Oral - rat – 2,800 mg/kg
LD50 Dermal – rabbit >2,000 mg/kg
LD50 Inhalation - rat – 2.30 mg/l, 2 hour exposure time

11.1.2 Corrosion/irritation
Skin - rabbit
Result: Mild skin irritation – 24 hours

11.1.3 Serious eye damage/eye irritation
Eyes - rabbit
Result: Severe eye irritation – 24 hours

11.1.4 Respiratory or skin sensitization
Inhalation - no data available
Skin Sensitization: no data available

11.1.5 Germ cell mutagenicity
No data available

11.1.6 Carcinogenicity
No data available

11.1.7 Reproductive toxicity
No data available

11.1.8 Specific target organ toxicity - single exposure
No data available

11.1.9 Specific target organ toxicity - repeated exposure
No data available

11.1.10 Chronic effects from short and long-term exposure
On continuous / repeated exposure / contact: Red skin. Dry skin. Tingling / irritation of the
skin. Affection of the nasal septum.

Page 8 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE

12 ECOLOGICAL INFORMATION 
12.1  TOXICITY 

12.2 PERSISTENCE AND DEGRADABILITY: 
Biodegradability: not applicable

12.3 BIOACCUMULATIVE POTENTIAL: 
Low potential for bioaccumulation (Log Know <4)
12.4 MOBILITY IN SOIL: 
Low potential for absorption in soil.

12.5 RESULTS OF PBT AND VPVB ASSESSMENT:  
PBT/vPvB assessment not available as chemical safety assessment is not required/not conducted.
12.6 OTHER ADVERSE EFFECTS: 
No data available

13 DISPOSAL CONSIDERATIONS 
13.1 WASTE DISPOSAL 
Remove waste in accordance with local and/or national regulations. Contact a licensed
professional waste disposal service to dispose of this material. Different types of hazardous waste
should not be mixed together if it will entail a risk of pollution or create problems for the further
management of the waste. Hazardous waste shall be managed responsibly. Do not discharge
into drains.

Parameter Method Value Duration Species Test
design
Fresh/salt
water
Value
determination
Acute toxicity
fishes
LC50 Other 300 mg/l 96 h Lepomis
macrohirus
Static
system
Fresh water Experimental
value
Acute toxicity
invertebrates
EC50 Other 200 - 227
mg/l
48 h Ceriodaphnia
sp.
Semi-
static
Fresh water Experimental
value
Toxicity algae
and other
aquatic plants
EC50 242 mg/l 5 days Algae Experimental
value
Page 9 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE

14 TRANSPORT INFORMATION 
14.1 UNITED STATES DEPARTMENT OF TRANSPORTATION (DOT) 
Non-regulated
14.2 INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) 
Non-regulated
14.3 INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) 
Non-regulated
14.4 TDG / ADN / RID / ADR 
Non-regulated

15 REGULATORY INFORMATION 
15.1 SARA 302 COMPONENTS 
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title
III, Section 302.
15.2 SARA 313 COMPONENTS 
SARA 313: This material does not contain any chemical with known CAS numbers that exceed the
threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
15.3 SARA 311/312 HAZARDS  
Acute Health Hazard
15.4 PENNSYLVANIA RIGHT TO KNOW COMPONENTS 
Sodium carbonate, CAS-No: 497-19-8 
15.5 NEW JERSEY RIGHT TO KNOW COMPONENTS 
Sodium carbonate, CAS-No: 497-19-8 
15.6 WHMIS CLASSIFICATION: C, D2 
Note: The product listed on this SDS has been classified in accordance with the hazard criteria of
the Canadian Controlled Products Regulations.

Page 10 of 10 

CINER SDS | SODA ASH / SODIUM CARBONATE

16 OTHER INFORMATION 
16.1 FULL TEXT OF H‐STATEMENTS REFERRED TO UNDER SECTION 2 AND 3. 
Eye Irrit. Eye Irritation
H319 Causes serious eye irritation
16.2 HMIS RATING 
Health Hazard:    2 
Flammability:    0   
Physical Hazard:    0 
16.3 NFPA RATING 
Health Hazard:    2 
Fire Hazard:    0   
Reactivity Hazard:  0 
16.4 NOTICE 
The above information is believed to be correct but is not intended to be all inclusive and shall
be used only as a guide. The information in this document is based on the present state of
our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Ciner and its Affiliates
shall not be held liable for any damage resulting from handling or from contact with the above
product.
Issue Date: 07/07/2017
Print Date: 10/13/2017
SECTION 1 IDENTIFICATION
Product Identifier
Other means of
identification
Not Available
Recommended use of the chemical and restrictions on use
Name, address, and telephone number of the chemical manufacturer, importer, or other responsible party
Registered company
name
Emergency phone number
Association /
Organisation Not Available
Emergency telephone
numbers
Other emergency
telephone numbers
SECTION 2 HAZARD(S) IDENTIFICATION
Classification of the substance or mixture
Chemwatch Hazard Alert Code: 1
Address 516 B 2nd Street Graham, TX 76450, United States
Relevant identified uses Drilling fluids compound. Lost circulation material.
HAZARD RATINGS
SuperSwell Coarse
Product name SuperSwell Coarse
Synonyms Not Available
Website www.dcsmud.com
Email
Telephone [phone] / 940-521-0500 (EMERGENCY CONTACT)
Fax
940-521-0500
MaxMin
Flammability 1
Toxicity 0
Body Contact 1
Reactivity 1
Chronic 0
0 = Minimum
1 = Low
2 = Moderate
3 = High
4 = Extreme
NFPA 704 diamond
Note: The hazard category numbers found in GHS classification
in section 2 of this SDSs are NOT to be used to fill in the NFPA
704 diamond. Blue = Health Red = Fire Yellow = Reactivity White
= Special (Oxidizer or water reactive substances)
Classification Eye Irritation Category 2B
Label elements
Hazard pictogram(s)Not Applicable
SIGNAL WORD WARNING
Hazard statement(s)
H320 Causes eye irritation.
Hazard(s) not otherwise specified
Not Applicable
Precautionary statement(s) Prevention
P264 Wash all exposed external body areas thoroughly after handling.
Precautionary statement(s) Response
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
Precautionary statement(s) Storage
Not Applicable
Precautionary statement(s) Disposal
Not Applicable
SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS
Substances
See section below for composition of Mixtures
Mixtures
CAS No %[weight]Name
25608-12-2 >90
SECTION 4 FIRST-AID MEASURES
Description of first aid measures
Eye Contact
If this product comes in contact with the eyes:
Wash out immediately with fresh running water.
Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by
occasionally lifting the upper and lower lids.
Seek medical attention without delay; if pain persists or recurs seek medical attention.
Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
Skin Contact
If skin or hair contact occurs:
Flush skin and hair with running water (and soap if available).
Seek medical attention in event of irritation.
Inhalation If fumes, aerosols or combustion products are inhaled remove from contaminated area.
Other measures are usually unnecessary.
Ingestion
Immediately give a glass of water.
First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
potassium polyacrylate
Page 2 of 8 Issue Date: 07/07/2017
Print Date: 10/13/2017SuperSwell Coarse
Most important symptoms and effects, both acute and delayed
See Section 11
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5 FIRE-FIGHTING MEASURES
Extinguishing media
There is no restriction on the type of extinguisher which may be used.
Use extinguishing media suitable for surrounding area.
Special hazards arising from the substrate or mixture
Fire Incompatibility Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition
may result
Special protective equipment and precautions for fire-fighters
Fire Fighting Alert Fire Brigade and tell them location and nature of hazard.
Wear breathing apparatus plus protective gloves in the event of a fire.
Fire/Explosion Hazard
Combustible solid which burns but propagates flame with difficulty; it is estimated that most organic dusts are
combustible (circa 70%) - according to the circumstances under which the combustion process occurs, such materials
may cause fires and / or dust explosions.
Organic powders when finely divided over a range of concentrations regardless of particulate size or shape and
suspended in air or some other oxidizing medium may form explosive dust-air mixtures and result in a fire or dust
explosion (including secondary explosions).
Combustion products include:
,
carbon monoxide (CO)
,
carbon dioxide (CO2)
,
other pyrolysis products typical of burning organic material.
May emit poisonous fumes.
May emit corrosive fumes.
SECTION 6 ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
See section 8
Environmental precautions
See section 12
Methods and material for containment and cleaning up
Minor Spills Clean up all spills immediately.
Avoid breathing dust and contact with skin and eyes.
Major Spills
Moderate hazard.
CAUTION : Advise personnel in area.
Personal Protective Equipment advice is contained in Section 8 of the SDS.
SECTION 7 HANDLING AND STORAGE
Precautions for safe handling
Safe handling
Avoid all personal contact, including inhalation.
Wear protective clothing when risk of exposure occurs.
Organic powders when finely divided over a range of concentrations regardless of particulate size or shape and
suspended in air or some other oxidizing medium may form explosive dust-air mixtures and result in a fire or dust
explosion (including secondary explosions)
Minimise airborne dust and eliminate all ignition sources. Keep away from heat, hot surfaces, sparks, and flame.
Other information
Store below 38 deg. C.
Store in original containers.
Keep containers securely sealed.
Page 3 of 8 Issue Date: 07/07/2017
Print Date: 10/13/2017SuperSwell Coarse
Conditions for safe storage, including any incompatibilities
Suitable container Polyethylene or polypropylene container.
Check all containers are clearly labelled and free from leaks.
Storage incompatibility Avoid reaction with oxidising agents
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Control parameters
OCCUPATIONAL EXPOSURE LIMITS (OEL)
INGREDIENT DATA
Not Available
EMERGENCY LIMITS
MATERIAL DATA
Exposure controls
Appropriate engineering
controls
Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed
engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions
to provide this high level of protection.
Personal protection
Eye and face protection Safety glasses with side shields.
Chemical goggles.
Skin protection See Hand protection below
Hands/feet protection
The selection of suitable gloves does not only depend on the material, but also on further marks of quality which vary
from manufacturer to manufacturer. Where the chemical is a preparation of several substances, the resistance of the
glove material can not be calculated in advance and has therefore to be checked prior to the application.
Experience indicates that the following polymers are suitable as glove materials for protection against undissolved, dry
solids, where abrasive particles are not present.
polychloroprene.
Body protection See Other protection below
Other protection
Overalls.
P.V.C.
Thermal hazards Not Available
Respiratory protection
Particulate. (AS/NZS 1716 & 1715, EN 143:2000 & 149:001, ANSI Z88 or national equivalent)
Respirators may be necessary when engineering and administrative controls do not adequately prevent exposures.
The decision to use respiratory protection should be based on professional judgment that takes into account toxicity information, exposure measurement
data, and frequency and likelihood of the worker's exposure - ensure users are not subject to high thermal loads which may result in heat stress or
distress due to personal protective equipment (powered, positive flow, full face apparatus may be an option).
Published occupational exposure limits, where they exist, will assist in determining the adequacy of the selected respiratory protection. These may be
government mandated or vendor recommended.
Certified respirators will be useful for protecting workers from inhalation of particulates when properly selected and fit tested as part of a complete
respiratory protection program.
Use approved positive flow mask if significant quantities of dust becomes airborne.
Try to avoid creating dust conditions.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance White solid crystals; insoluble in water.
Page 4 of 8 Issue Date: 07/07/2017
Print Date: 10/13/2017
Ingredient Original IDLH Revised IDLH
potassium polyacrylate Not Available Not Available
SuperSwell Coarse
Ingredient Material name TEEL-1 TEEL-2 TEEL-3 CS
SuperSwell Coarse Not Available
Physical state Divided Solid Relative density (Water =
1)1.48
Odour Not Available Partition coefficient
n-octanol / water Not Available
Odour threshold Not Available Auto-ignition temperature
(°C)Not Available
pH (as supplied)Not Applicable Decomposition
temperature Not Available
Melting point / freezing
point (°C)
Not Available Viscosity (cSt)Not Applicable
Initial boiling point and
boiling range (°C)Not Applicable Molecular weight (g/mol)Not Applicable
Flash point (°C)Not Applicable Taste Not Available
Evaporation rate Not Applicable Explosive properties Not Available
Flammability Not Applicable Oxidising properties Not Available
Upper Explosive Limit
(%)
Not Available Surface Tension (dyn/cm
or mN/m)
Not Applicable
Lower Explosive Limit
(%)Not Available Volatile Component
(%vol)Not Applicable
Vapour pressure (kPa)Not Applicable Gas group Not Available
Solubility in water (g/L)Immiscible pH as a solution (1%)Not Applicable
Vapour density (Air = 1)Not Applicable VOC g/L Not Available
SECTION 10 STABILITY AND REACTIVITY
Reactivity See section 7
Chemical stability Unstable in the presence of incompatible materials.
Product is considered stable.
Possibility of hazardous
reactions
See section 7
Conditions to avoid See section 7
Incompatible materials See section 7
Hazardous
decomposition products See section 5
SECTION 11 TOXICOLOGICAL INFORMATION
Information on toxicological effects
Inhaled
The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified by EC
Directives using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and
that suitable control measures be used in an occupational setting.
Persons with impaired respiratory function, airway diseases and conditions such as emphysema or chronic bronchitis,
may incur further disability if excessive concentrations of particulate are inhaled.
If prior damage to the circulatory or nervous systems has occurred or if kidney damage has been sustained, proper
screenings should be conducted on individuals who may be exposed to further risk if handling and use of the material
result
in excessive exposures.
Ingestion
High molecular weight material; on single acute exposure would be expected to pass through gastrointestinal tract with little
change / absorption. Occasionally accumulation of the solid material within the alimentary tract may result in formation of
a bezoar (concretion), producing discomfort.
Skin Contact
The material is not thought to produce adverse health effects or skin irritation following contact (as classified by EC
Directives using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and
that suitable gloves be used in an occupational setting.
Open cuts, abraded or irritated skin should not be exposed to this material
Entry into the blood-stream through, for example, cuts, abrasions, puncture wounds or lesions, may produce systemic
injury with harmful effects. Examine the skin prior to the use of the material and ensure that any external damage is
suitably protected.
Eye
Limited evidence or practical experience suggests, that the material may cause moderate eye irritation in a substantial
number of individuals and/or may produce significant ocular lesions which are present twenty-four hours or more after
instillation into the eye(s) of experimental animals. Repeated or prolonged exposure may cause moderate inflammation
(similar to windburn) characterised by a temporary redness of the conjunctiva (conjunctivitis); temporary impairment of
vision and/or other transient eye damage/ulceration may occur.
Page 5 of 8 Issue Date: 07/07/2017
Print Date: 10/13/2017SuperSwell Coarse
Legend: – Data available but does not fill the criteria for classification
– Data available to make classification
– Data Not Available to make classification
The dust may produce eye discomfort and abrasive eye inflammation.
Chronic
On the basis, primarily, of animal experiments, concern has been expressed by at least one classification body that the
material may produce carcinogenic or mutagenic effects; in respect of the available information, however, there presently
exists inadequate data for making a satisfactory assessment.
Long term exposure to high dust concentrations may cause changes in lung function (i.e. pneumoconiosis) caused by
particles less than 0.5 micron penetrating and remaining in the lung. A prime symptom is breathlessness.
Although polymers with a molecular weight above 10000 are normally considered to be PLCs (polymers of low concern)
(because these are not expected to be absorbed by biological systems), this rule does NOT apply to water-absorbing
polymers.
A two year oncogenicity study with high molecular weight polyacrylate (1 million), with no reactive functional groups,
showed a statistically significant induction of lung tumours in rats exposed at 0.8 mg/m3 respirable particles.
TOXICITY IRRITATION
Not Available Not Available
potassium polyacrylate
TOXICITY IRRITATION
Not Available Not Available
Legend:1. Value obtained from Europe ECHA Registered Substances - Acute toxicity 2.* Value obtained from manufacturer's SDS.
Unless otherwise specified data extracted from RTECS - Register of Toxic Effect of chemical Substances
POTASSIUM
POLYACRYLATE
No significant acute toxicological data identified in literature search.
The material may produce moderate eye irritation leading to inflammation. Repeated or prolonged exposure to irritants
may produce conjunctivitis.
Acute Toxicity Carcinogenicity
Skin Irritation/Corrosion Reproductivity
Serious Eye
Damage/Irritation STOT - Single Exposure
Respiratory or Skin
sensitisation
STOT - Repeated
Exposure
Mutagenicity Aspiration Hazard
SECTION 12 ECOLOGICAL INFORMATION
Toxicity
ENDPOINT TEST DURATION (HR)SPECIES VALUE SOURCE
Not
Available Not Available Not Available Not
Available
Not
Available
potassium polyacrylate
ENDPOINT TEST DURATION (HR)SPECIES VALUE SOURCE
Not
Available Not Available Not Available Not
Available
Not
Available
Legend:Extracted from 1. IUCLID Toxicity Data 2. Europe ECHA Registered Substances - Ecotoxicological Information - Aquatic
Toxicity 3. EPIWIN Suite V3.12 (QSAR) - Aquatic Toxicity Data (Estimated) 4. US EPA, Ecotox database - Aquatic Toxicity
Data 5. ECETOC Aquatic Hazard Assessment Data 6. NITE (Japan) - Bioconcentration Data 7. METI (Japan) -
Bioconcentration Data 8. Vendor Data
Persistence and degradability
Ingredient Persistence: Water/Soil Persistence: Air
No Data available for all ingredients No Data available for all ingredients
Page 6 of 8 Issue Date: 07/07/2017
Print Date: 10/13/2017
DO NOT discharge into sewer or waterways.
May be harmful to fauna if not disposed of according to Section 13 and legislative requirements.
SuperSwell Coarse
SuperSwell Coarse
SuperSwell Coarse
Bioaccumulative potential
Ingredient Bioaccumulation
No Data available for all ingredients
Mobility in soil
Ingredient Mobility
No Data available for all ingredients
SECTION 13 DISPOSAL CONSIDERATIONS
Waste treatment methods
Product / Packaging
disposal
Legislation addressing waste disposal requirements may differ by country, state and/ or territory. Each user must refer to
laws operating in their area.
DO NOT allow wash water from cleaning or process equipment to enter drains.
It may be necessary to collect all wash water for treatment before disposal.
SECTION 14 TRANSPORT INFORMATION
Labels Required
Marine Pollutant NO
Land transport (DOT): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Air transport (ICAO-IATA / DGR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Sea transport (IMDG-Code / GGVSee): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS
Transport in bulk according to Annex II of MARPOL and the IBC code
Not Applicable
SECTION 15 REGULATORY INFORMATION
Safety, health and environmental regulations / legislation specific for the substance or mixture
POTASSIUM POLYACRYLATE(25608-12-2) IS FOUND ON THE FOLLOWING REGULATORY LISTS
US List of Active Substances Exempt from the TSCA Inventory
Notifications (Active-Inactive) Rule
US Toxic Substances Control Act (TSCA) - Chemical Substance Inventory
US TSCA Chemical Substance Inventory - Interim List of Active
Substances
Federal Regulations
Superfund Amendments and Reauthorization Act of 1986 (SARA)
SECTION 311/312 HAZARD CATEGORIES
Immediate (acute) health hazard Yes
Delayed (chronic) health hazard No
Fire hazard No
Pressure hazard No
Reactivity hazard No
US. EPA CERCLA HAZARDOUS SUBSTANCES AND REPORTABLE QUANTITIES (40 CFR 302.4)
None Reported
State Regulations
US. CALIFORNIA PROPOSITION 65
None Reported
National Inventory Status
Australia - AICS Y
Page 7 of 8 Issue Date: 07/07/2017
Print Date: 10/13/2017DCS SUPER SWELL COARSE
Canada - DSL Y
Canada - NDSL N (potassium polyacrylate)
China - IECSC Y
Europe - EINEC / ELINCS /
NLP N (potassium polyacrylate)
Japan - ENCS Y
Korea - KECI Y
New Zealand - NZIoC Y
Philippines - PICCS Y
USA - TSCA Y
Legend:
Y = All ingredients are on the inventory
N = Not determined or one or more ingredients are not on the inventory and are not exempt from listing(see specific
ingredients in brackets)
SECTION 16 OTHER INFORMATION
Other information
Definitions and abbreviations
PC－TWA: Permissible Concentration-Time Weighted Average
PC－STEL: Permissible Concentration-Short Term Exposure Limit
IARC: International Agency for Research on Cancer
ACGIH: American Conference of Governmental Industrial Hygienists
STEL: Short Term Exposure Limit
TEEL: Temporary Emergency Exposure Limit。
IDLH: Immediately Dangerous to Life or Health Concentrations
OSF: Odour Safety Factor
NOAEL :No Observed Adverse Effect Level
LOAEL: Lowest Observed Adverse Effect Level
TLV: Threshold Limit Value
LOD: Limit Of Detection
OTV: Odour Threshold Value
BCF: BioConcentration Factors
BEI: Biological Exposure Index
Page 8 of 8 Issue Date: 07/07/2017
Print Date: 10/13/2017DCS SUPER SWELL COARSE
The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are
Risks in the workplace or other settings.
SAFETY DATA SHEET
1. Identification
SUPER GEL-X®Product identifier
None.Other means of identification
Not available.Recommended use
Workers (and your customers or users in the case of resale) should be informed of the potential
presence of respirable dust and respirable crystalline silica as well as their potential hazards.
Appropriate training in the proper use and handling of this material should be provided as required
under applicable regulations.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
CETCO, an MTI Company
Address 2870 Forbs Avenue
Company name
Website
Telephone General Information 800 527-9948
Emergency phone number .
E-mail
United States
http://www.cetco.com/
[e-mail]
Hoffman Estates, IL 60192
1.866.519.4752 (US, Canada, Mexico) 1 760 476 3962 Access Code 333562Americas
2. Hazard(s) identification
Not classified.Physical hazards
Not classified.Health hazards
Not classified.Environmental hazards
Not classified.OSHA defined hazards
Label elements
None.Hazard symbol
Signal word None.
Hazard statement Not applicable.
Precautionary statement
Prevention Observe good industrial hygiene practices.
Response Wash hands after handling.
Storage Store away from incompatible materials.
Disposal Dispose of waste and residues in accordance with local authority requirements.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information Not applicable.
3. Composition/information on ingredients
Mixtures
CAS number %Common name and synonymsChemical name
Other components below reportable levels 90 - 100
Proprietary*TRADE SECRET*< 0.1
Constituents
CAS number %Chemical name
CALCIUM CARBONATE 471-34-1
SMECTITE GROUP MINERALS 1318-93-0
1 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Constituents
CAS number %Chemical name
QUARTZ 14808-60-7 <= 8
CRISTOBALITE 14464-46-1 <= 2
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. Bentonite is a
UVCB substance sub-type 4. The purity of the product is 100 % w/w. Bentonite is composed mainly of smectite group minerals but the
composition is varied, as expected for a UVCB substance, and other mineral constituents will be present in small and varying
amounts. These minor constituents are not relevant for classification and labelling.
Occupational Exposure Limits for constituents are listed in Section 8. The purity of the product is
100% w/w. Impurities are not applicable for a UVCB substance.
Composition comments
4. First-aid measures
If dust from the material is inhaled, remove the affected person immediately to fresh air. Call a
physician if symptoms develop or persist. No specific first aid measures noted.
Inhalation
No specific first aid measures noted. Get medical attention if irritation develops and persists. Wash
skin with soap and water.
Skin contact
No specific first aid measures noted.Eye contact
No specific first aid measures noted. Rinse mouth thoroughly. Get medical attention if any
discomfort occurs.
Ingestion
Dust in the eyes will cause irritation.Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically.Indication of immediate
medical attention and special
treatment needed
No hazards which require special first aid measures. Provide general supportive measures and
treat symptomatically.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Use any media suitable for the
surrounding fires.
Suitable extinguishing media
Not applicable, non-combustible.Unsuitable extinguishing
media
None known. The product itself does not burn.Specific hazards arising from
the chemical
Material can be slippery when wet.Special protective equipment
and precautions for firefighters
In the event of fire, cool tanks with water spray. Material can be slippery when wet.Fire fighting
equipment/instructions
Cool containers exposed to flames with water until well after the fire is out.Specific methods
No unusual fire or explosion hazards noted. This material will not burn.General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Material can be slippery when wet. Use a NIOSH/MSHA
approved respirator if there is a risk of exposure to dust/fume at levels exceeding the exposure
limits. Avoid inhalation of dust from the spilled material. For personal protection, see section 8 of
the SDS. No special precautions are necessary beyond normal good hygiene practices. See
Section 8 for additional personal protection advice when handling this product.
Personal precautions,
protective equipment and
emergency procedures
If sweeping of a contaminated area is necessary use a dust suppressant agent which does not
react with the product. Sweep up or vacuum up spillage and collect in suitable container for
disposal. Collect dust using a vacuum cleaner equipped with HEPA filter. Minimize dust generation
and accumulation. Avoid the generation of dusts during clean-up. Following product recovery, flush
area with water. For waste disposal, see section 13 of the SDS. Collect powder using special dust
vacuum cleaner with particle filter or carefully sweep into closed container.
Methods and materials for
containment and cleaning up
Prevent further leakage or spillage if safe to do so. No special environmental precautions required.Environmental precautions
7. Handling and storage
Minimize dust generation and accumulation. Provide appropriate exhaust ventilation at places
where dust is formed. Avoid breathing dust. Avoid contact with skin and eyes. In case of
insufficient ventilation, wear suitable respiratory equipment. Practice good housekeeping.
Precautions for safe handling
2 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
No special restrictions on storage with other products. Store in a dry area. Store in original tightly
closed container. Keep the container dry. Store in a well-ventilated place. Store away from
incompatible materials (see Section 10 of the SDS). Guard against dust accumulation of this
material.
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
ValueConstituents FormType
PEL 5 mg/m3 Respirable fraction.INERT OR NUISANCE
DUSTS
15 mg/m3 Total dust.
US. OSHA Table Z-3 (29 CFR 1910.1000)
ValueConstituents FormType
TWA 5 mg/m3 Respirable fraction.INERT OR NUISANCE
DUSTS
15 mg/m3 Total dust.
50 mppcf Total dust.
15 mppcf Respirable fraction.
US. ACGIH Threshold Limit Values
ValueComponents Type
TWA 2 ppmTRADE SECRET
US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents Type
TWA 6 mg/m3TRADE SECRET
2 ppm
No biological exposure limits noted for the ingredient(s).Biological limit values
Exposure guidelines
US - California OELs: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
US - Tennessee OELs: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
US ACGIH Threshold Limit Values: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
US NIOSH Pocket Guide to Chemical Hazards: Skin designation
TRADE SECRET (CAS Proprietary) Can be absorbed through the skin.
Ventilation should be sufficient to effectively remove and prevent buildup of any dusts or fumes
that may be generated during handling or thermal processing. If engineering measures are not
sufficient to maintain concentrations of dust particulates below the OEL, suitable respiratory
protection must be worn.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Use tight fitting goggles if dust is generated. Wear dust-resistant safety goggles where there is
danger of eye contact.
Eye/face protection
Skin protection
No protection is ordinarily required under normal conditions of use.Hand protection
Normal work clothing (long sleeved shirts and long pants) is recommended.Other
Use a NIOSH/MSHA approved respirator if there is a risk of exposure to dust/fume at levels
exceeding the exposure limits.
Respiratory protection
Not applicable.Thermal hazards
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants. Use good industrial hygiene practices in handling this
material.
General hygiene
considerations
9. Physical and chemical properties
Lump, granular or fine powder.Appearance
Solid.Physical state
3 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Powder. Various.Form
Various.Color
None.Odor
Odor threshold Not applicable.
pH 8.5 - 11
Melting point/freezing point > 842 °F (> 450 °C) / Not applicable.
Initial boiling point and boiling
range
Not applicable.
Flash point Not applicable.
Evaporation rate Not available.
This product is not flammable.Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not applicable.
Flammability limit - upper
(%)
Not applicable.
Explosive limit - lower (%)Not available.
Explosive limit - upper (%)Not available.
Vapor pressure Not applicable.
Vapor density Not applicable.
Relative density 2.6 g/cm³
Solubility(ies)
Solubility (water)< 0.9 mg/l
Partition coefficient
(n-octanol/water)
Not applicable.
Not applicable.
Auto-ignition temperature Not applicable.
Decomposition temperature > 932 °F (> 500 °C)
Viscosity Not applicable.
Viscosity temperature Not applicable.
Other information
Bulk density 0.9 - 1.4 g/cm³
Explosive limit Not applicable.
Not explosiveExplosive properties
Explosivity Not applicable.
Flame extension Not applicable.
Flammability Not applicable.
Flammability (flash back)Not applicable.
Flammability (Heat of
combustion)
Not applicable.
Flammability (Train fire)Not applicable.
Flammability class Not applicable.
Flash point class Not flammable
Molecular formula UVCB Substance
Molecular weight Not applicable.
None.Oxidizing properties
Percent volatile 0 %
pH in aqueous solution 8.5 - 11
Specific gravity Not applicable.
VOC (Weight %)CARB
0 %
4 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
10. Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity
Stable at normal conditions.Chemical stability
Will not occur.Possibility of hazardous
reactions
Moisture. Avoid temperatures exceeding the decomposition temperature. Contact with
incompatible materials. Avoid dispersal of dust in the air (i.e., clearing dust surfaces with
compressed air).
Conditions to avoid
None known.Incompatible materials
None.Hazardous decomposition
products
11. Toxicological information
Information on likely routes of exposure
Inhalation Inhalation of dusts may cause respiratory irritation.
Skin contact Not classified.
Eye contact Dust in the eyes will cause irritation.
Ingestion Not classified.
Symptoms related to the
physical, chemical and
toxicological characteristics
None known.
Information on toxicological effects
Test ResultsProduct Species
Bentonite
Inhalation
Acute
LC50 Rat > 5.27 mg/l, 4 hr OECD 436
Dust
Oral
LD50 Rat > 2000 mg/kg OECD 425
Dust
Test ResultsComponents Species
TRADE SECRET
Inhalation
Acute
LC50 Rat 10600 mg/l/4h
1200 mg/l, 4 Hours
Oral
LD50 Mouse 2400 mg/kg
* Estimates for product may be based on additional component data not shown.
Rat 33.5 mg/kg
Not classified.Skin corrosion/irritation
Dust in the eyes will cause irritation. Mild irritant to eyes (according to the modified Kay & Calandra
criteria)
Serious eye damage/eye
irritation
Respiratory or skin sensitization
Respiratory sensitization Not classified.
Not classified.Skin sensitization
Not classified.Germ cell mutagenicity
5 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Carcinogenicity In June 2003, SCOEL (the EU Scientific Committee on Occupational Exposure Limits) concluded
that the main effect in humans of the inhalation of respirable crystalline silica dust is silicosis.
"There is sufficient information to conclude that the relative risk of lung cancer is increased in
persons with silicosis (and, apparently, not in employees without silicosis exposed to silica dust in
quarries and in the ceramic industry). Therefore, preventing the onset of silicosis will also reduce
the cancer risk..." (SCOEL SUM Doc 94-final, June 2003) According to the current state of the art,
worker protection against silicosis can be consistently assured by respecting the existing
regulatory occupational exposure limits. Occupational exposure to respirable dust and respirable
crystalline silica should be monitored and controlled. No carcinogenicity data available for this
product. Sepiolite was evaluated by IARC as class 3 ("Cannot be classified as to carcinogenicity
to humans"). Based on read-across with sepiolite, bentonite was assessed as non-carcinogenic.
Therefore classification of bentonite for carcinogenicity is not warranted.
IARC Monographs. Overall Evaluation of Carcinogenicity
TRADE SECRET (CAS Proprietary) 3 Not classifiable as to carcinogenicity to humans.
Not classified.Reproductive toxicity
Specific target organ toxicity -
single exposure
Not classified.
Specific target organ toxicity -
repeated exposure
Not classified.
Aspiration hazard Not available.
12. Ecological information
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Ecotoxicity
Product Test ResultsSpecies
Bentonite
Aquatic
EC50Algae > 100 mg/l, 72 hoursFreshwater algae
EC50Crustacea 24.8 mg/l, 96 hoursCoon stripe shrimp (Pandalus danae)
> 100 mg/l, 48 hoursDaphnia
81.6 mg/l, 96 hoursDungeness or edible crab (Cancer
magister)
LC50Fish 16000 mg/l, 96 hoursFreshwater fish
2800 - 3200 mg/l, 24 hoursMarine water fish
Components Test ResultsSpecies
TRADE SECRET
Aquatic
EC50Crustacea 47 mg/L, 48 HoursDaphnia
* Estimates for product may be based on additional component data not shown.
LC50Fish 222 mg/L, 96 HoursFish
Not relevant for inorganic substancesPersistence and degradability
Will not bio-accumulate.Bioaccumulative potential
Partition coefficient n-octanol / water (log Kow)
TRADE SECRET 0.35
Bentonite is almost insoluble and thus presents a low mobility in most soils.Mobility in soil
The product has poor water-solubility.Mobility in general
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in
accordance with all applicable regulations.
Disposal instructions
Dispose in accordance with all applicable regulations.Local disposal regulations
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Hazardous waste code
6 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Waste from residues / unused
products
Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Store containers and offer for recycling of material when in accordance with the local
regulations.
Contaminated packaging
14. Transport information
DOT
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Not applicable.Transport in bulk according to
Annex II of MARPOL 73/78 and
the IBC Code
15. Regulatory information
US federal regulations
CERCLA Hazardous Substance List (40 CFR 302.4)
TRADE SECRET (CAS Proprietary) Listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Immediate Hazard - No
Delayed Hazard - No
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
Hazard categories
SARA 302 Extremely hazardous substance
Not listed.
NoSARA 311/312 Hazardous
chemical
SARA 313 (TRI reporting)
Not regulated.
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
TRADE SECRET (CAS Proprietary)
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Not regulated.Safe Drinking Water Act
(SDWA)
Total food additive
Direct food additive
GRAS food additive
Food and Drug
Administration (FDA)
US state regulations
US - New Jersey RTK - Substances: Listed substance
TRADE SECRET (CAS Proprietary)
US - Pennsylvania RTK - Hazardous Substances: Listed substance
TRADE SECRET (CAS Proprietary)
US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100)
Not listed.
US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd.
(a))
TRADE SECRET (CAS Proprietary)
US. Massachusetts RTK - Substance List
TRADE SECRET (CAS Proprietary)
7 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
US. New Jersey Worker and Community Right-to-Know Act
TRADE SECRET (CAS Proprietary)
US. Pennsylvania Worker and Community Right-to-Know Law
TRADE SECRET (CAS Proprietary)
US. Rhode Island RTK
TRADE SECRET (CAS Proprietary)
US. California Proposition 65
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain
any chemicals currently listed as carcinogens or reproductive toxins.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
YesAustralia Australian Inventory of Chemical Substances (AICS)
YesCanada Domestic Substances List (DSL)
NoCanada Non-Domestic Substances List (NDSL)
YesChina Inventory of Existing Chemical Substances in China (IECSC)
NoEurope European Inventory of Existing Commercial Chemical
Substances (EINECS)
NoEurope European List of Notified Chemical Substances (ELINCS)
NoJapan Inventory of Existing and New Chemical Substances (ENCS)
YesKorea Existing Chemicals List (ECL)
YesNew Zealand New Zealand Inventory
YesPhilippines Philippine Inventory of Chemicals and Chemical Substances
(PICCS)
YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
10-October-2013Issue date
24-July-2015Revision date
Version #20
This safety datasheet only contains information relating to safety and does not replace any product
information or product specification.
UVCB = a substance of Unknown or Variable composition, Complex reaction products or
Biological materials
SWERF = Size Weighted Respirable Fraction methodology is a scientific method developed to
quantify the content of respirable particles within a bulk product. All details about the SWERF
method are available at www.crystallinesilica.eu.
HMIS® is a registered trade and service mark of the NPCA.
Further information
Health: 1
Flammability: 0
Physical hazard: 0
HMIS® ratings
Health: 1
Flammability: 0
Instability: 0
NFPA ratings
List of abbreviations
SWERF = Size-Weighted Relevant Fine Fraction methodology is a scientific method developed to
quantify the content of respirable particles within a bulk product. All details about the SWERF
method are available at www.crystallinesilica.eu.
UVCB = a substance of Unknown or Variable composition, Complex reaction products or
Biological materials
For any information on literature references or toxicity/ecotoxicity studies, please contact the
supplier.
References
8 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US
The information provided in this Safety Data Sheet is correct to the best of our knowledge,
information and belief at the date of its publication. The information given is designed only as a
guidance for safe handling, use, processing, storage, transportation, disposal and release and is
not to be considered a warranty or quality specification. The manufacturer expressly does not
make any representations, warranties, or guarantees as to its accuracy, reliability or completeness
nor assumes any liability, for its use. It is the user's responsibility to verify the suitability and
completeness of such information for each particular use. The information relates only to the
specific material designated and may not be valid for such material used in combination with any
other materials or in any process, unless specified in the text. The information in the sheet was
written based on the best knowledge and experience currently available.
Disclaimer
This document has undergone significant changes and should be reviewed in its entirety.Revision Information
9 / 9
Material name: SUPER GEL-X®
4786 Version #: 20 Revision date: 24-July-2015 Print date: 24-July-2015
SDS US

Description SLIKGEL is a 200 mesh, 200 barrel yield, high performance viscosifier designed to
meet demanding slurry needs while reducing overall bentonite requirements by one
half. SLIKGEL functions as a viscosifier and filtrate reducer in freshwater drilling
systems.

Application

• Drilling Mud
 Oil & Gas Well Drilling
 Mineral Exploration Drilling
 Water Well Drilling
 Seismic Drilling
 Caisson Drilling
 Horizontal Drilling
• General High Performance Viscosifier

Typical Properties Product Description Typical SLIKGEL
Color
Density
pH
Barrel Yield
Grit +200 Mesh
Moisture
tan to beige
65 PCF Compact
8.5 to 9.0
200
1.5 to 2.5 wt.%
8-10 wt.%

Advantages

• 200 Barrel Yield
• NSF/ANSI Standard 60 Certified
• Cools and lubricates drill bit
• Mixes quickly and easily
• Excellent hard water performance

• Lowers solids content in slurry
• Reduces fluid loss into the formation
• Removes cuttings
• Stabilizes borehole
• Reduced freight cost by 50%

Mixing

Condition mixed with fresh water lb/100 gal lb/bbl kg/m3
Normal Drilling Conditions
In Gravel or Poorly Consolidated Formations
To Stop Loss of Circulation

25
25-40
35-45

10
12-18
15-20

29
35-50
40-55

Soda Ash can be added at a rate of 1-2 lbs/100 gal to counter act the effects in hard
water situations.

Packaging

SLIKGEL high performance viscosifier is available in 50 lb. multi-wall paper bags.

Availability

To order SLIKGEL please contact us at:

Certified to
NSF/ANSI 60

Western Clay Company
PO BOX 127
Aurora, Utah 84620
Phone: [phone]
Toll Free: 800-982-7960
Fax: [phone]

SLIKGEL
High Yielding Sodium Bentonite / Viscosifier / Filtrate Reducer
789 N. Dixboro Road, Ann Arbor, MI 48105 USADCSRECOGNIZESFluid SolutionsGraham, TXAS COMPLYING WITH NSF/ANSI 60 AND ALL APPLICABLE REQUIREMENTS.PRODUCTS APPEARING IN THE NSF OFFICIAL LISTING AREAUTHOzuZED TO BE,AR THE NSF MARK.rffi]lolt=i:ar,-Certification ProgrmAccrediGd by theStandards Councilof CnnadaThis ccrtificatc is the propcrty ofNSIr lntcrnational and must bc retunled upon requcst. This ccrtificate remains valid as long as this client has products inListing fbr the rcfbrenced stanclards. For the most current and complete Listing infbrrnatior"''"Ui;il"*ffililns'forg),^-(qg,iffi f"'i",'lli',1fl^lllilNSF IntentationalCcnification ProgramAccredited by theAnrcrican NationalStandards lnstituteSeptember 15,2017Certificate# C0358512 - 01Theresa BellishGeneral Manager, Water Systerns
MATERIAL SAFETY DATA SHEET

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Trade Name:DUO-VIS*

Chemical Family:Mixture
Product Use:Drilling fluid additive.

Supplied by:M-I L.L.C.
P.O. Box 42842
Houston, TX 77242
www.miswaco.com
Telephone Number:281-561-1511
Emergency Telephone (24 hr.):281-561-1600
Prepared by:Product Safety Group

Revision No.5

HMIS Rating

4=Severe, 3=Serious, 2=Moderate, 1=Slight, 0=Minimal Hazard. *Chronic effects - See Section 11. See Section 8 for
Personal Protective Equipment recommendations.

2. HAZARDS IDENTIFICATION

Emergency Overview:Warning! May cause eye, skin, and respiratory tract irritation. May cause skin
sensitization, an allergic reaction, on repeated exposure. Long term inhalation of
particulates may cause lung damage.

Canadian Classification:

Potential Health Effects:
Acute Effects
Eye Contact:May irritate eyes.
Skin Contact:May be irritating to the skin. May cause skin sensitization, an allergic reaction, on
repeated exposure.
Inhalation:May be irritating to the respiratory tract. Long term inhalation of particulate may
cause lung damage.
Ingestion:May cause gastric distress, nausea and vomiting if ingested.

Carcinogenicity & Chronic
Effects:
See Section 11 - Toxicological Information.

Routes of Exposure:Eyes. Dermal (skin) contact. Inhalation.
Target Organs/Medical
Conditions Aggravated by
Overexposure:
Eyes. Skin. Respiratory System.

MSDS No. 10034
Flammability: 1
Physical State:Powder.
Physical Hazard: 0
Color:White to Tan Odor:Slight
Trade Name:
PPE:E
DUO-VIS*Revision Date: 07/21/2009
UN PIN No:Not regulated.

Health: 2
WHMIS Class:D2B
MATERIAL SAFETY DATA SHEET
Trade Name: DUO-VIS*

3. COMPOSITION/INFORMATION ON INGREDIENTS

Ingredient CAS No.Wt. %Comments:
Xanthan gum 11138-66-2 99 - 99.9 No comments.
Glyoxal 107-22-2 0.1 - 1 No comments.

4. FIRST AID MEASURES

Eye Contact:Promptly wash eyes with lots of water while lifting eye lids. Continue to rinse for at
least 15 minutes. Get medical attention if any discomfort continues.
Skin Contact:Wash skin thoroughly with soap and water. Remove contaminated clothing and
launder before reuse. Get medical attention if any discomfort continues.
Inhalation:Move person to fresh air. If not breathing, give artificial respiration. If breathing is
difficult, give oxygen. Get medical attention.
Ingestion:Dilute with 2 - 3 glasses of water or milk, if conscious. Never give anything by mouth
to an unconscious person. If signs of irritation or toxicity occur seek medical
attention.

General notes:Persons seeking medical attention should carry a copy of this MSDS with them.

5. FIRE FIGHTING MEASURES

Flammable Properties

Flash Point: F (C):NA
Flammable Limits in Air - Lower (%): ND
Flammable Limits in Air - Upper (%): ND
Autoignition Temperature: F (C): ND
Flammability Class:ND
Other Flammable Properties:Particulate may accumulate static electricity. Dusts at sufficient concentrations can
form explosive mixtures with air.
Extinguishing Media:Use extinguishing media appropriate for surrounding fire.

Protection Of Fire-Fighters:

Special Fire-Fighting Procedures: Do not enter fire area without proper personal protective equipment, including
NIOSH/MSHA approved self-contained breathing apparatus. Evacuate area and fight fire from a safe distance. Water
spray may be used to keep fire-exposed containers cool. Keep water run off out of sewers and waterways.

Hazardous Combustion Products: Oxides of: Carbon.

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions:Use personal protective equipment identified in Section 8.

Spill Procedures:Evacuate the spill area with the exception of the spill response team. Contain spilled
material. Do not allow spilled material to enter sewers, storm drains or surface
waters. Avoid the generation of dust. Sweep, vacuum, or shovel and place into
closable container for disposal.

Environmental Precautions:Waste must be disposed of in accordance with federal, state and local laws.
Revision Date: 07/21/2009 Page 2/6MSDS No. 10034

MATERIAL SAFETY DATA SHEET
Trade Name: DUO-VIS*

7. HANDLING AND STORAGE

Handling:Put on appropriate personal protective equipment. Avoid contact with skin and eyes.
Avoid generating or breathing dust. Product is slippery if wet. Use only with
adequate ventilation. Wash thoroughly after handling.

Storage:Store at room temperature in dry, well ventilated area. Keep in original container.
Keep container closed. Store away from incompatibles.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Limits (TLV & PEL - 8H TWA):

Ingredient CAS No.Wt. %ACGIH TLV OSHA PEL Other Notes
Xanthan gum 11138-66-2 99 - 99.9 NA NA NA (1)
Glyoxal 107-22-2 0.1 - 1 0.1 mg/m3 NA NA (sen)

Notes
(1) Control as an ACGIH particulate not otherwise specified (PNOS): 10 mg/m3 (Inhalable); 3 mg/m3 (Respirable) and an
OSHA particulate not otherwise regulated (PNOR): 15 mg/m3 (Total); 5 mg/m3 (Respirable).
(Sen) - Sensitizer.

Engineering Controls: Use appropriate engineering controls such as, exhaust ventilation and process enclosure, to
ensure air contamination and keep workers exposure below the applicable limits.

Personal Protection Equipment

All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical
hazards present and the risk of exposure to those hazards. The PPE recommendations below are based on our
assessment of the chemical hazards associated with this product. The risk of exposure and need for respiratory
protection will vary from workplace to workplace and should be assessed by the user.

Eye/Face Protection:Dust resistant safety goggles.

Skin Protection:Wear appropriate clothing to prevent repeated or prolonged skin contact. Chemical
resistant gloves recommended for prolonged or repeated contact. Use protective
gloves made of: Neoprene. Nitrile.

Respiratory Protection:All respiratory protection equipment should be used within a comprehensive
respiratory protection program that meets the requirements of 29 CFR 1910.134
(U.S. OSHA Respiratory Protection Standard) or local equivalent.
If exposed to airborne particles of this product use at least a NIOSH-approved N95
half-mask disposable or re-useable particulate respirator. In work environments
containing oil mist/aerosol use at least a NIOSH-approved P95 half-mask disposable
or re-useable particulate respirator.

General Hygiene Considerations:Wash promptly with soap and water if skin becomes contaminated. Change work
clothing daily if there is any possibility of contamination.

9. PHYSICAL AND CHEMICAL PROPERTIES

MSDS No. 10034

Revision Date: 07/21/2009 Page 3/6
MATERIAL SAFETY DATA SHEET
Trade Name: DUO-VIS*
Color:White to Tan
Odor:Slight
Physical State:Powder.
pH:5.4 - 8.6
Specific Gravity (H2O = 1):1.5 g/cc
Solubility (Water):Soluble
Melting/Freezing Point:ND
Boiling Point:ND
Vapor Pressure:NA
Vapor Density (Air=1):NA
Evaporation Rate:ND
Odor Threshold(s):ND

10. STABILITY AND REACTIVITY

Chemical Stability:Stable
Conditions to Avoid:Keep away from heat, sparks and flame.
Materials to Avoid:Strong oxidizing agents.
Hazardous Decomposition
Products:
For thermal decomposition products, see Section 5.
Hazardous Polymerization Will not occur

11. TOXICOLOGICAL INFORMATION

Component Toxicological Data: Any adverse component toxicological effects are listed below. If no effects are listed,
no such data were found.

Ingredient CAS No.Acute Data
Xanthan gum 11138-66-2 Oral LD50: > 5,000 mg/kg (rat)
Glyoxal 107-22-2 Oral LD50: 200 mg/kg (rat); Dermal LD50: 10 ml/kg (rabbit)

Product Toxicological Information:
No toxicological data is available for this product.

12. ECOLOGICAL INFORMATION

Component Ecotoxicity Data:Component ecotoxicity data are listed below. If no data are listed, none was found in
the component review.

Ingredient CAS No.Data
Xanthan gum 11138-66-2 LC50 96H: 490 mg/l (rainbow trout); LC50 48H: 980 mg/l
(Daphnia magna)
Glyoxal 107-22-2 LC50 96H static: 215,000 ug/l (Pimephales promelas
(fathead minnow)); EC50 96H static: 66,480 - 148,960 ug/l
(Selenastrum capricornutum (green algae))

Product Ecotoxicity Data:Contact M-I Environmental Affairs Department for available product ecotoxicity data.

Biodegration:ND
Bioaccumulation:ND
Octanol/Water Partition
Coefficient:
ND

Revision Date: 07/21/2009 Page 4/6MSDS No. 10034
MATERIAL SAFETY DATA SHEET
Trade Name: DUO-VIS*

13. DISPOSAL CONSIDERATIONS

Waste Classification:This product does not meet the criteria of a hazardous waste if discarded in its
purchased form.

Waste Management:Under U.S. Environmental Protection Agency (EPA) Resource Conservation and
Recovery Act ( RCRA), it is the responsibility of the user to determine at the time of
disposal, whether the product meets RCRA criteria for the hazardous waste. This is
because product uses, transformations, mixtures, processes, etc., may render the
resulting materials hazardous. Empty containers retain residues. All labeled
precautions must be observed.

Disposal Method:Recover and reclaim or recycle, if practical. Should this product become a waste,
dispose of in a permitted industrial landfill. Ensure that the containers are empty by
the RCRA criteria prior to disposal in a permitted industrial landfill.

14. TRANSPORT INFORMATION

U.S. DOT
Shipping Description:Not regulated for transportation by DOT, TDG, IMDG,
ICAO/IATA.
Canada TDG Shipping Description:Not regulated.
UN PIN No:Not regulated.
IMDG Shipping Description:Not regulated.
ICAO/IATA Shipping Description:Not regulated.

15. REGULATORY INFORMATION

U.S. Federal and State Regulations

SARA 311/312 Hazard Catagories:Immediate (acute) health hazard.

SARA 302/304, 313; CERCLA RQ,
California Proposition 65:
Note: If no components are listed below, this product is not subject to the referenced
SARA and CERCLA regulations and is not known to contain a Proposition 65 listed
chemical at a level that is expected to pose a significant risk under anticipated use
conditions.

International Chemical Inventories

Australia AICS - Components are listed or exempt from listing.
Canada DSL - Components are listed or exempt from listing.
China Inventory - Components are listed or exempt from listing.
European Union EINECS/ELINCS - Components are listed or exempt from listing.
Japan METI ENCS - Components are listed or exempt from listing.
Korea TCCL ECL - Components are listed or exempt from listing.
New Zealand - Components are listed or exempt from listing.
Philippine PICCS - Components are listed or exempt from listing.
U.S. TSCA - Components are listed or exempt from listing.
U.S. TSCA - No components are subject to TSCA 12(b) export notification requirements.
Canadian Classification:

Page 5/6MSDS No. 10034

Revision Date: 07/21/2009
MATERIAL SAFETY DATA SHEET
Trade Name: DUO-VIS*
Controlled Products Regulations Statement: This product has been classified in accordance with the hazard criteria of the
CPR and the MSDS contains all the information required by the CPR.

WHMIS Class:D2B

16. OTHER INFORMATION
The following sections have been revised: 1, 4, 6, 15, 16

NA - Not Applicable, ND - Not Determined.

*A mark of M-I L.L.C.
Disclaimer:
MSDS furnished independent of product sale. While every effort has been made to accurately describe this product, some of the data are obtained from
sources beyond our direct supervision. We can not make any assertions as to its reliability or completeness; therefore, user may rely on it only at user´s
risk. We have made no effort to censor or conceal deleterious aspects of this product. Since we cannot anticipate or control the conditions under which
this information and product may be used, we make no guartantee that the precautions we have suggested will be adequate for all individuals and/or
situations. It is the obligation of each user of this product to comply with the requirements of all applicable laws regarding use and disposal of this
product. Additional information will be furnished upon request to assist the user; however, no warranty, either expressed or implied, nor liability of any
nature with respect to this product or to the data herein is made or incurred hereunder.

Revision Date: 07/21/2009 Page 6/6MSDS No. 10034
Safety Data Sheet
KLA-GARD†
SDS no. MI11168
Version 4
Revision date 24/Sep/2014
Supersedes date 31/Jul/2013
1. Identification of the substance/preparation and of the Company/undertaking
1.1 Product identifier
Product name KLA-GARD†
Product code MI11168
1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended Use Shale control agent.
Uses advised against Consumer use
1.3 Details of the supplier of the safety data sheet
1.4 Emergency Telephone Number
Emergency telephone - (24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe +44
(0) 1235 239 670, Middle East and Africa [phone], New Zealand [phone], USA 001 281 561 1600
2. Hazards identification
2.1 Classification of the substance or mixture
Classification according to (EC) No. 1272/2008
Health hazards Not classified
Environmental hazards Not classified
Physical Hazards Not classified
2.2 Label elements
Signal word
None
________________________________________________________________________________________
Hazard statements
This product is not classified as hazardous therefore no (H) hazard statements assigned.
Precautionary Statements - EU (§28, 1272/2008)
Supplier
Schlumberger Drilling Services Sdn Bhd (SDSSB)
Suite 13.2, West Wing, Rohas Perkasa
9 Jalan P. Ramlee
50250 Kuala Lumpur
Page 1 / 11
[e-mail]
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
This product is not classified as hazardous therefore has no (P) precautionary statements assigned.

Classification according to EU Directives 67/548/EEC or 1999/45/EC
Indication of danger
Not classified
Contains
For the full text of the R-phrases and H-Statements mentioned in this Section, see Section 16.
2.3 Other data
Not classified as PBT/vPvB by current EU criteria
Australian statement of hazardous/dangerous nature
Classified as Non-Hazardous according to the criteria of NOHSC.
NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS.
3. Composition/information on ingredients
3.1 Substances
Not Applicable
3.2 Mixtures
Component EC-No.CAS-No Weight % -
range
Classification
(67/548)
Classification (Reg.
1272/2008)
REACH
registration
number
Listed Proprietary 60-100 -Not classified No data available
Comments
The product contains other ingredients which do not contribute to the overall classification.
4. First aid measures
4.1 First-Aid Measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
________________________________________________________________________________________
Ingestion Rinse mouth. Do not induce vomiting without medical advice. Never give anything by mouth
to an unconscious person. Get medical attention if symptoms occur.
Skin contact Wash off immediately with soap and plenty of water removing all contaminated clothes and
shoes. Get medical attention immediately if symptoms occur.
Eye contact
Page 2 / 11
Remove contact lenses. Promptly wash eyes with lots of water while lifting eye lids.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
4.2 Most important symptoms and effects, both acute and delayed
General advice The severity of the symptoms described will vary dependant of the concentration and the
length of exposure. If adverse symptoms develop, the casualty should be transferred to
hospital as soon as possible.
Main symptoms
Inhalation Please see Section 11. Toxicological Information for further information.
Ingestion Please see Section 11. Toxicological Information for further information.
Skin contact Please see Section 11. Toxicological Information for further information.
Eye contact Please see Section 11. Toxicological Information for further information.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician Treat symptomatically.
5. Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Use extinguishing media appropriate for surrounding material.
Extinguishing media which shall not be used for safety reasons
None known.
5.2 Special hazards arising from the substance or mixture
Unusual fire and explosion hazards
None known.
Hazardous combustion products
Fire or high temperatures create:, Carbon oxides (COx), Ammonia, Nitrogen oxides (NOx).
5.3 Advice for firefighters
Special protective equipment for fire-fighters
As in any fire, wear self-contained breathing apparatus and full protective gear.
Special Fire-Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
________________________________________________________________________________________
Use personal protective equipment. See also section 8.
6.2 Environmental precautions
The product should not be allowed to enter drains, water courses or the soil.
Environmental exposure controls
Avoid release to the environment. Local authorities should be advised if significant spillages cannot be contained.
Page 3 / 11
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
6.3 Methods and materials for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so. Dike far ahead of liquid spill for later disposal.
Methods for cleaning up
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. After cleaning, flush away
traces with water.
6.4 Reference to other sections
See section 13 for more information.
7. Handling and storage
7.1 Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes. Do not breathe vapors or
spray mist. Avoid spills and splashing during use. Ammonia or amines may be released when this component is heated or exposed
to high pH.
Hygiene measures
Use good work and personal hygiene practices to avoid exposure. When using do not smoke, eat or drink. Wash hands before
eating, drinking or smoking Remove contaminated clothing.
7.2 Conditions for safe storage, including any incompatibilities
Technical measures/precautions Ensure adequate ventilation. Keep airborne concentrations below exposure limits.
Storage precautions Keep containers tightly closed in a dry, cool and well-ventilated place. Avoid heat, flames
and other sources of ignition. Avoid contact with: Oxidizing agents Acids Bases
Storage class Chemical storage.
Packaging material Use specially constructed containers only
7.3 Specific end uses
See Section 1.2.
8. Exposure controls/personal protection
8.1 Control parameters
Exposure limits No biological limit allocated
Component EU OEL
________________________________________________________________________________________
Austria Australia Denmark
Not determined Not determined Not determined Not determined
Page 4 / 11
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
Component Malaysia France Germany Hungary
Not determined Not determined Not determined Not determined
Component New Zealand Italy Netherlands Norway
Not Determined Not determined Not determined Not determined
Component Poland Portugal Romania Russia
Not determined Not determined Not determined 10 mg/m3 MAC
Component Spain Switzerland Turkey UK
Not determined Not determined Not determined Not determined
8.2 Exposure controls
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard
present and the risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical
hazards associated with this product. Where this product is used in a mixture with other products or fluids, additional hazards may
be created and as such further assessment of risk may be required. The risk of exposure and need of respiratory protection will
vary from workplace to workplace and should be assessed by the user in each situation.
Engineering measures to reduce exposure
Ensure adequate ventilation. Mechanical ventilation or local exhaust ventilation is required.
Personal protective equipment
Eye protection It is good practice to wear goggles when handling any chemical. Tightly fitting safety
goggles.
Hand protection Repeated or prolonged contact:, Use protective gloves made of:, Nitrile, Neoprene, Be
aware that liquid may penetrate the gloves. Frequent change is advisable.
Respiratory protection No personal respiratory protective equipment normally required, In case of insufficient
ventilation wear suitable respiratory equipment, Chemical respirator with ammonia and
amines cartridge (K/P2, green filter).
Skin and body protection Wear suitable protective clothing, Eye wash and emergency shower must be available at
the work place.
Hygiene measures Wash hands before eating, drinking or smoking, Remove and wash contaminated clothing
before re-use.
9. Physical and chemical properties
________________________________________________________________________________________
9.1 Information on basic physical and chemical properties
Appearance No information available
Odor Amine
Color Clear - Blue
Page 5 / 11
Physical state Liquid
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
Odor threshold Not applicable
Explosive properties Not Applicable
Oxidizing properties None known.
9.2 Other information
Pour point No information available
Molecular weight No information available
VOC content(%)None
Density No information available
10. Stability and reactivity
10.1 Reactivity
No specific reactivity hazards associated with this product.
10.2 Chemical stability
Stable under normal temperature conditions and recommended use.
10.3 Possibility of Hazardous Reactions
Hazardous polymerization
Hazardous polymerization does not occur.
10.4 Conditions to avoid
Avoid heat, flames and other sources of ignition. Ammonia or amines may be released when this component is heated or exposed
to high pH.
10.5 Incompatible materials
Oxidizing agents. Acids. Bases.
Property Values Remarks
pH No information available
pH @ dilution 6.5 - 8.5 (1% solution)
Melting/freezing point
Boiling point/range 125 °C
Flash point > 98 °C / > 210 °F Closed cup
Evaporation rate (BuAc =1)
Flammability (solid, gas)Not Applicable
Flammability Limits in Air
Upper flammability limit Not applicable
Lower flammability limit Not applicable
Vapor pressure No information available
Vapor density No information available
Specific gravity 1.1 sg 16 (68°F) °C
Bulk density No information available
Relative density No information available
Water solubility Soluble in water
Solubility in other solvents No information available
Autoignition temperature No information available
Decomposition temperature No information available
________________________________________________________________________________________
Kinematic viscosity
Dynamic viscosity No information available
Log Pow
Page 6 / 11
Not determined
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
10.6 Hazardous decomposition products
See also section 5.2.
11. Toxicological information
11.1 Information on toxicological effects
Acute toxicity
Inhalation Inhalation of vapors in high concentration may cause irritation of respiratory system.
Eye contact May cause slight irritation.
Skin contact Prolonged contact may cause redness and irritation.
Ingestion Ingestion may cause stomach discomfort.
Unknown acute toxicity Not Applicable.
Component LD50 Oral LD50 Dermal LC50 Inhalation
= 3400 mg/kg ( Rat )No data available No data available
Sensitization This product does not contain any components suspected to be sensitizing.
Mutagenic effects This product does not contain any known or suspected mutagens.
Carcinogenicity This product does not contain any known or suspected carcinogens.
Reproductive toxicity None known.
Routes of exposure None known.
Routes of entry No route of entry noted.
Specific target organ toxicity
(single exposure)
Not classified
Specific target organ toxicity
(repeated exposure)
Not classified.
Aspiration hazard No hazard from product as supplied.
________________________________________________________________________________________
12. Ecological information
12.1 Toxicity
Page 7 / 11
The product component(s) are not classified as environmentally hazardous. However, this does not exclude the possibility that
large or frequent spills can have a harmful or damaging effect on the environment.
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
Toxicity to algae
This product is not considered toxic to algae.
Toxicity to fish
This product is not considered toxic to fish.
Toxicity to daphnia and other aquatic invertebrates
This product is not considered toxic to invertebrates.
Component Toxicity to fish Toxicity to algae Toxicity to daphnia and other
aquatic invertebrates
10000 mg/L LC50 (Leuciscus idus)
= 96 h
500 mg/L EC50 (Desmodesmus
subspicatus) = 72 h
320 mg/L EC50 (Daphnia magna) =
48 h
500 mg/L EC50 (Daphnia magna
Straus) = 48 h
12.2 Persistence and degradability
No product level data available.
12.3 Bioaccumulative potential
No data available.
12.4 Mobility in soil
Mobility
Soluble in water.
12.5 Results of PBT and vPvB assessment
Not classified as PBT/vPvB by current EU criteria.
12.6 Other adverse effects.
None known.
________________________________________________________________________________________
13. Disposal considerations
13.1 Waste treatment methods
Waste from residues / unused
products
Dispose of in accordance with local regulations.
Page 8 / 11
Contaminated packaging Empty containers should be taken for local recycling, recovery or waste disposal.
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
EWC Waste disposal No.According to the European Waste Catalogue, Waste Codes are not product specific, but
application specific. Waste codes should be assigned by the user based on the application
for which the product was used. The following Waste Codes are only suggestions: EWC
waste disposal No: 07 01 99.
14. Transport information
The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,ADR/RID/ADG).
14.1 UN Number
Not regulated
14.2 Proper shipping name
Not regulated
14.3 Hazard class(es)
ADR/RID/ADN/ADG Hazard class Not regulated
IMDG Hazard class Not regulated
ICAO Hazard class/division Not regulated
14.4 Packing group
ADR/RID/ADN/ADG Packing group Not regulated
IMDG Packing group Not regulated
ICAO Packing group Not regulated
14.5 Environmental hazard
No
14.6 Special precautions
Not Applicable
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Please contact [e-mail] for info regarding transport in Bulk.
15. Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Germany, Water Endangering
Classes (VwVwS)
Water endangering class = 1
Australian Standard for the Uniform Scheduling of Drugs and Poisons
No Poisons Schedule number allocated
________________________________________________________________________________________
New Zealand hazard classification Not classified.
HSNO approval no.Not required.
Group number
Page 9 / 11
Not required.
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
Commission Regulation (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European
Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals
Agency, amending Directive 1999/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC)
No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and
2000/21/EC, including amendments.
This safety data sheet complies with the requirements of Regulation (EC) No. 1272/2008.
National Code of Practice for the Preparation of Material Safety Data Sheets 2nd Edition [NOHSC: 2011 (2003)].
National Occupational Health and Safety Commission’s Approved Criteria for Classifying Hazardous Substances
[NOHSC:1008 (2004) 3rd Edition].
National Occupational Health and Safety Commission’s Exposure Standards for Atmospheric Contaminants in the
occupational Environment [NOHSC:1003 (1995)].
Safe Work Australia.
Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP).
Not classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for transport by
road or rail.
Occupational Safety and Health (Classification, Labelling and Safety Data Sheet of Hazardous Chemicals) Regulations
2013 [P.U.(A) 310/2013] (CLASS Regulations)
The Industry Code of Practice on Chemical Classification and Hazard Communication 2014 [P.U. (B) 128/2014] (ICOP)
International inventories
USA (TSCA)Complies
European Union (EINECS and ELINCS)Complies
Canada (DSL)Complies
Philippines (PICCS)Complies
Japan (ENCS)Complies
China (IECSC)Complies
Australia (AICS)Complies
Korean (KECL)Complies
New Zealand (NZIoC)Complies
Contact [e-mail] for REACH information.
15.2 Chemical Safety Report
No information available
16. Other information
Prepared by Global Regulatory Compliance - Chemicals (GRC - Chemicals) , Anne Karin (Anka) Fosse
Supersedes date 31/Jul/2013
________________________________________________________________________________________
Revision date 24/Sep/2014
Version 4
The following sections have been
revised:
Page 10 / 11
This SDS have been made in a new database and therefore a new layout. No changes with
regard to classification have been made, Updated according to GHS/CLP.
________________________________________________________________________________________
KLA-GARD†SDS no. MI11168
Revision date 24/Sep/2014
Text of R phrases mentioned in Section 3
Not classified
Full text of H-Statements referred to under sections 2 and 3
This product is not classified as hazardous therefore no (H) hazard statements assigned.
Not classified
________________________________________________________________________________________
†A mark of M-I L.L.C.
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
Page 11 / 11
Safety data sheet number PID1046
Version 4
Revision date 28/Oct/2016
Supercedes date 14/Feb/2016
Safety Data Sheet
MAX GEL*
1. Identification of the substance/preparation and of the Company/undertaking
1.1 Product identifier
Product name MAX GEL*
Product code PID1046
1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended Use Viscosifier.
Uses advised against Consumer use
1.3 Details of the supplier of the safety data sheet
1.4 Emergency Telephone Number
Emergency telephone - (24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe +44
(0) 1235 239 670, Middle East and Africa [phone], New Zealand [phone], USA 001 281 561 1600
Norway Poison information centre: [phone]
2. Hazards identification
2.1 Classification of the substance or mixture
Regulation (EC) No. 1272/2008
Health hazards Not classified
Environmental hazards Not classified
Physical Hazards Not classified
2.2 Label elements
Signal word
None
Hazard statements
Supplier
M-I Drilling Fluids UK Limited
C/O Schlumberger
Enterprise Drive
Westhill Industrial Estate
Westhill, AB32 6TQ
Scotland UK
[phone]
[e-mail]
________________________________________________________________________________________
Page 1 / 12
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
This product is not classified as hazardous therefore no (H) hazard statements assigned.
Precautionary Statements - EU (§28, 1272/2008)
This product is not classified as hazardous therefore has no (P) precautionary statements assigned.

Contains
Crystalline silica (impurity)
Silica - crystalline, tridymite
2.3 Other data
Not classified as PBT/vPvB by current EU criteria
Australian statement of hazardous/dangerous nature
Classified as Non-Hazardous according to the criteria of NOHSC.
NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS.
3. Composition/information on ingredients
3.1 Substances
Component EC-No.CAS-No Weight % -
range
Classification
(67/548)
Classification (Reg.
1272/2008)
REACH
registration
number
Crystalline silica
(impurity)
238-878-4 14808-60-7 1-5 Xn; R48/20 STOT Rep. 2 - H373 Exempt
Silica - crystalline,
tridymite
239-487-1 15468-32-3 0-1 Xn; R48/20 STOT RE 2 (H373)No data available
3.2 Mixtures
Not Applicable
Comments
Naturally occuring mineral.
The product contains other ingredients which do not contribute to the overall classification.
This product contains a small quantity of quartz, crystalline silica. Prolonged and repeated exposure to concentrations of crystalline
silica exceeding the workplace exposure limit (WEL) may lead to chronic lung disease such as silicosis. IARC Monographs, Vol.
68, 1997, concludes that there is sufficient evidence that inhaled crystalline silica in the form of quartz or cristobalite from
occupational sources causes cancer in humans. IARC Classification Group I.
________________________________________________________________________________________
Page 2 / 12
4. First aid measures
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
4.1 First Aid
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Ingestion Rinse mouth. Do not induce vomiting without medical advice. Never give anything by mouth
to an unconscious person. Get medical attention if symptoms occur.
Skin contact Wash skin thoroughly with soap and water. Get medical attention if irritation persists.
Eye contact Promptly wash eyes with lots of water while lifting eye lids. Remove contact lenses. Get
medical attention if any discomfort continues.
4.2 Most important symptoms and effects, both acute and delayed
General advice The severity of the symptoms described will vary dependant of the concentration and the
length of exposure. If adverse symptoms develop, the casualty should be transferred to
hospital as soon as possible.
Main symptoms
Inhalation Please see Section 11. Toxicological Information for further information.
Ingestion Please see Section 11. Toxicological Information for further information.
Skin contact Please see Section 11. Toxicological Information for further information.
Eye contact Please see Section 11. Toxicological Information for further information.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician Treat symptomatically.
5. Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Use extinguishing media appropriate for surrounding material.
Extinguishing media which shall not be used for safety reasons
None known.
5.2 Special hazards arising from the substance or mixture
Unusual fire and explosion hazards
None known.
Hazardous combustion products
Thermal decomposition can lead to release of irritating gases and vapours
5.3 Advice for firefighters
________________________________________________________________________________________
Page 3 / 12
Special protective equipment for fire-fighters
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
As in any fire, wear self-contained breathing apparatus and full protective gear.
Special Fire-Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. See also section 8.
6.2 Environmental precautions
Disposal should be in accordance with applicable regional, national and local laws and regulations. Large spills released to the
environment may disturb the natural chemical balance of soil/fresh water.
Environmental exposure controls
Avoid release to the environment. Local authorities should be advised if significant spillages cannot be contained.
6.3 Methods and materials for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so. Cover powder spill with plastic sheet or tarp to minimise spreading.
Methods for cleaning up
Sweep up and shovel into suitable containers for disposal. After cleaning, flush away traces with water.
6.4 Reference to other sections
See section 13 for more information.
7. Handling and storage
7.1 Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes. Avoid dust formation.
Hygiene measures
Use good work and personal hygiene practices to avoid exposure When using do not smoke, eat or drink. Wash hands and face
before breaks and immediately after handling the product Remove contaminated clothing
7.2 Conditions for safe storage, including any incompatibilities
Technical measures/precautions Ensure adequate ventilation. Keep airborne concentrations below exposure limits.
Storage precautions Keep containers tightly closed in a dry, cool and well-ventilated place Protect from moisture
Storage class Chemical storage.
Packaging material Use specially constructed containers only
7.3 Specific end uses
________________________________________________________________________________________
Page 4 / 12
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
See Section 1.2.
8. Exposure controls/personal protection
8.1 Control parameters
Exposure Limits No biological limit allocated
Component EU OEL - Third List Austria Australia Denmark
Crystalline silica (impurity)Not determined 0.15 mg/m3 TWA
alveolar dust, respirable
fraction
0.1mg/m3TWArespirable
dust
0.1mg/m3
Silica - crystalline, tridymite Not determined 0.15 mg/m3 TWA
alveolar dust, respirable
fraction
0.1mg/m3TWArespirable
dust
0.15 mg/m3 TWA
0.05 mg/m3 TWA
K
Component Malaysia France Germany Hungary
Crystalline silica (impurity)0.1 mg/m3 TWA 0.1 mg/m3TWA Not determined 0.15mg/m3TWA
Silica - crystalline, tridymite 0.05 mg/m3 TWA 0.05 mg/m3TWA Not determined 0.15mg/m3TWA
Component New Zealand Italy Netherlands Norway
Crystalline silica (impurity)0.2 mg/m3 TWA
Known or presumed
human carcinogen
Not determined 0.075 mg/m3 0.3 mg/m3 TWA total
dust
0.1 mg/m3 TWA
respirable dust
0.3 mg/m3 STEL total
dust
0.1 mg/m3 STEL
respirable dust
Carcinogen
Silica - crystalline, tridymite 0.1 mg/m3 TWA
Known or presumed
human carcinogen
Not determined 0.075 mg/m3 0.15 mg/m3 TWA total
dust
0.05 mg/m3 TWA
respirable dust
0.45 mg/m3 STEL total
dust
0.15 mg/m3 STEL
respirable dust
Carcinogen
Component Poland Portugal Romania Russia
Crystalline silica (impurity)2 mg/m3 TWA NDS >50%
free crystalline silica
0.3 mg/m3 TWA NDS
>50% free crystalline
silica
4.0 mg/m3 TWA NDS 2%
to 50% free crystalline
silica
1.0 mg/m3 TWA NDS 2%
to 50% free crystalline
silica
0.025 mg/m3 TWA
respirable fraction
0.1mg/m3TWArespirable
fraction, dust
3 mg/m3 STEL 1123
disintegration aerosol,
total mass of aerosols
3 mg/m3 STEL 1124
total mass of aerosols
1 mg/m3 TWA 1123
1 mg/m3 TWA 1124
Fibrogenic substance
glass;regulated under
Quartz 1123, 1124
Silica - crystalline, tridymite 2 mg/m3 TWA NDS >50%
free crystalline silica
0.3 mg/m3 TWA NDS
>50% free crystalline
silica
4.0 mg/m3 TWA NDS 2%
to 50% free crystalline
silica
1.0 mg/m3 TWA NDS 2%
to 50% free crystalline
silica
Not determined 0.05mg/m3TWArespirabl
e fraction, dust
3 mg/m3 STEL 1124
total mass of aerosols
1 mg/m3 TWA 1124
Fibrogenic substance
1124
Component Spain Switzerland Turkey UK
________________________________________________________________________________________
Page 5 / 12
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
Crystalline silica (impurity)0.05 mg/m3 TWA VLA-ED 0.15 mg/m3 TWA MAK Not determined Not determined
Silica - crystalline, tridymite Not determined 0.15 mg/m3 TWA MAK Not determined Not determined
8.2 Exposure controls
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard
present and the risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical
hazards associated with this product. Where this product is used in a mixture with other products or fluids, additional hazards may
be created and as such further assessment of risk may be required. The risk of exposure and need of respiratory protection will
vary from workplace to workplace and should be assessed by the user in each situation.
Engineering measures to
reduce exposure
Ensure adequate ventilation. Mechanical ventilation or local exhaust ventilation is required.
Personal protective equipment
Eye protection Safety glasses with side-shields. Tightly fitting safety goggles.
Hand protection Repeated or prolonged contact:, Use protective gloves made of:, Neoprene, Nitrile,
Frequent change is advisable.
Respiratory protection No personal respiratory protective equipment normally required, In case of insufficient
ventilation wear suitable respiratory equipment, Suitable mask with particle filter P3
(European Norm 143), At work in confined or poorly ventilated spaces, respiratory
protection with air supply must be used.
Skin and body protection Wear suitable protective clothing, Eye wash and emergency shower must be available at
the work place.
Hygiene measures Wash hands before eating, drinking or smoking, Remove and wash contaminated clothing
before re-use.
9. Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance Powder
Odour Odourless
Colour Tan - Grey
Odour threshold Not applicable
Physical state Solid
Property Values Remarks
pH No information available
pH @ dilution
Melting/freezing point No information available
Boiling point/range No information available
Flash point No information available
Evaporation rate No information available
________________________________________________________________________________________
Page 6 / 12
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
Explosive properties Not Applicable
Oxidising properties None known
9.2 Other information
Pour point No information available
Molecular weight No information available
VOC content(%)None
Density No information available
10. Stability and reactivity
10.1 Reactivity
No specific reactivity hazards associated with this product.
10.2 Chemical stability
Stable under normal temperature conditions and recommended use.
10.3 Possibility of Hazardous Reactions
Hazardous polymerisation
Hazardous polymerisation does not occur.
10.4 Conditions to avoid
Avoid dust formation. Protect from moisture.
10.5 Incompatible materials
No materials to be especially mentioned.
10.6 Hazardous decomposition products
See Section 5.
11. Toxicological information
Flammability (solid, gas)Not Applicable
Flammability Limits in Air Not applicable
Upper flammability limit Not applicable
Lower flammability limit Not applicable
Vapour pressure No information available
Vapour density No information available
Specific gravity No information available
Bulk density No information available
Relative density 2.3 - 2.5 sg @ 20 °C.
Water solubility Insoluble in water
Solubility in other solvents No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity No information available
Dynamic viscosity No information available
Log Pow No information available
________________________________________________________________________________________
Page 7 / 12
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
11.1 Information on toxicological effects
Acute toxicity
Product information This product contains a small quantity of quartz, crystalline silica. Prolonged and repeated
exposure to concentrations of crystalline silica exceeding the workplace exposure limit
(WEL) may lead to chronic lung disease such as silicosis.
Inhalation Inhalation of dust in high concentration may cause irritation of respiratory system.
Eye contact Dust may cause mechanical irritation.
Skin contact Prolonged contact may cause redness and irritation.
Ingestion Ingestion may cause stomach discomfort.
Unknown acute toxicity Not Applicable.
Component LD50 Oral LD50 Dermal LC50 Inhalation
Crystalline silica (impurity)= 500 mg/kg ( Rat )No data available No data available
Silica - crystalline, tridymite No data available No data available No data available
Sensitisation This product does not contain any components suspected to be sensitizing.
Mutagenic effects This product does not contain any known or suspected mutagens.
Carcinogenicity Crystalline silica dust is listed by IARC in Group 1 as known to cause lung cancer in
humans, if inhaled.
Reproductive toxicity This product does not contain any known or suspected reproductive hazards.
Routes of exposure Inhalation.
Routes of entry Inhalation.
Specific target organ toxicity (single
exposure)
Not classified
Specific target organ toxicity
(repeated exposure)
Not classified.
Aspiration hazard Not Applicable.
________________________________________________________________________________________
Page 8 / 12
12. Ecological information
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
12.1 Toxicity
The product component(s) are not classified as environmentally hazardous. However, this does not exclude the possibility that
large or frequent spills can have a harmful or damaging effect on the environment. Listed on PLONOR list of OSPAR
Toxicity to algae
This product is not considered toxic to algae.
Toxicity to fish
This product is not considered toxic to fish.
Toxicity to daphnia and other aquatic invertebrates
This product is not considered toxic to invertebrates.
Component Toxicity to fish Toxicity to algae Toxicity to daphnia and other
aquatic invertebrates
Crystalline silica (impurity)No information available No information available No information available
Silica - crystalline, tridymite No information available No information available No information available
12.2 Persistence and degradability
Not Applicable - Inorganic chemical.
12.3 Bioaccumulative potential
Not Applicable - Inorganic chemical.
12.4 Mobility in soil
Mobility
Insoluble in water.
12.5 Results of PBT and vPvB assessment
Not classified as PBT/vPvB by current EU criteria.
12.6 Other adverse effects.
None known.
________________________________________________________________________________________
Page 9 / 12
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
13. Disposal considerations
13.1 Waste treatment methods
Waste from residues / unused
products
Dispose of in accordance with local regulations.
Contaminated packaging Empty containers should be transported/delivered using a registered waste carrier for local
recycling or waste disposal.
EWC waste disposal No.According to the European Waste Catalogue, Waste Codes are not product specific, but
application specific. Waste codes should be assigned by the user based on the application
for which the product was used The following Waste Codes are only suggestions: EWC
waste disposal No: 01 05 99 - wastes not otherwise specified
14. Transport information
14.1 UN number
Not regulated
14.2 Proper shipping name
The product is not covered by international regulation on the transport of dangerous goods
14.3. Hazard class(es)
ADR/RID/ADN/ADG Hazard class Not regulated
IMDG Hazard class Not regulated
ICAO Hazard class/division Not regulated
14.4 Packing group
ADR/RID/ADN/ADG Packing Group Not regulated
IMDG Packing group Not regulated
ICAO Packing group Not regulated
14.5 Environmental hazard
No
14.6 Special precautions
Not Applicable
14.7 Transport in bulk according to Annex I/II of MARPOL 73/78 and the IBC Code
Please contact [e-mail] for info regarding transport in Bulk.
15. Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Germany, Water Endangering
Classes (VwVwS)
Water endangering class = 1
________________________________________________________________________________________
Page 10 / 12
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
Australian Standard for the Uniform Scheduling of Drugs and Poisons
No Poisons Schedule number allocated
New Zealand hazard classification Not classified.
HSNO approval no.Not required.
Group number Not required.
Commission Regulation (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European
Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals
Agency, amending Directive 1999/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC)
No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and
2000/21/EC, including amendments.
This safety data sheet complies with the requirements of Regulation (EC) No. 1272/2008.
National Code of Practice for the Preparation of Material Safety Data Sheets 2nd Edition [NOHSC: 2011 (2003)].
National Occupational Health and Safety Commission’s Approved Criteria for Classifying Hazardous Substances
[NOHSC:1008 (2004) 3rd Edition].
National Occupational Health and Safety Commission’s Exposure Standards for Atmospheric Contaminants in the
occupational Environment [NOHSC:1003 (1995)].
Safe Work Australia.
Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP).
Not classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for transport by
road or rail.
International inventories
USA, Toxic Substances Control Act inventory (TSCA)Complies
European Union - EINECS and ELINCS Complies
Canada (DSL)Complies.
Philippines (PICCS)Complies
Inventory - Japan - Existing and New Chemicals list Complies
China (IECSC)Complies
Australia (AICS)Complies
Korea (KECL)Complies
Inventory - New Zealand - Inventory of Chemicals (NZIoC)Complies
Contact [e-mail] for REACH information.
15.2 Chemical Safety Report
No information available
________________________________________________________________________________________
Page 11 / 12
16. Other information
________________________________________________________________________________________
MAX GEL*
Safety data sheet number PID1046
Revision date 28/Oct/2016
Prepared by Global Regulatory Compliance - Chemicals (GRC - Chemicals) , Anne Karin (Anka) Fosse
Supercedes date 14/Feb/2016
Revision date 28/Oct/2016
Version 4
The following sections have been
revised:
3,, 5,, 6,, 7,, 9,, 10,, 11,, 16, No changes with regard to classification have been made.
Text of R phrases mentioned in Section 3
R48/20 - Harmful: danger of serious damage to health by prolonged exposure through inhalation
Full text of H-Statements referred to under sections 2 and 3
This product is not classified as hazardous therefore no (H) hazard statements assigned.
H373 - May cause damage to organs through prolonged or repeated exposure if inhaled
*A mark of M-I L.L.C., a Schlumberger Company
Disclaimer
The information contained herein is considered in good faith as reliable of the date issued and is based upon on
measurements, tests or data derived from supplier’s own study or furnished by others. In providing this SDS
information, Supplier makes no express or implied warranties as to the information or product; merchantability or fitness
of purpose; any express or implied w arranty; or non-infringement of intellectual property rights; and supplier assumes no
responsibility for any direct, special or consequential damages, results obtained, or the activities of others. To the
maximum extent permitted by law, supplier’s warranty obligations and buyer’s sole remedies are as stated in separate
agreement between the parties.
________________________________________________________________________________________
Page 12 / 12
SDS no. PID12350
Version 3
Revision date 05/Apr/2017
Supersedes date 10/Oct/2016
Safety Data Sheet
PLATINUM D-D*
1. Identification
1.1 Product identifier
Product name PLATINUM D-D*
Product code PID12350
1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended Use Wetting agent.
Uses advised against Consumer use
1.3 Details of the supplier of the safety data sheet
E-mail address [e-mail]
Prepared by
Global Regulatory Compliance - Chemicals (GRC - Chemicals) , Bethicia Prasek
1.4 Emergency Telephone Number
Emergency telephone (24 Hour) Asia Pacific [phone], Europe [phone], Middle East and Africa +44 (0) 1235
239 671, USA [phone], Canada [phone], Argentina: [phone], Brazil : 0800-720-8000 0800-777-2323
(WGRA)
2. Hazards identification
2.1 Classification of the substance or mixture
GHS - Classification
Health hazards
Serious eye damage/eye irritation Category 1
Supplier
M-I L.L.C.
P.O.Box 42842
Houston, TX 77242
www.miswaco.slb.com
Telephone: [phone]
Schlumberger Canada, Ltd.
200, 125 - 9th Avenue SE
Calgary, Alberta T2G 0P6, Canada
Telephone: [phone]
_____________________________________________________________________________________________
Page 1 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
Environmental hazards Not classified
Physical Hazards Not classified
2.2 Label elements
Signal word
DANGER
Hazard statements
H318 - Causes serious eye damage
Precautionary statements
P280 - Wear protective gloves/protective clothing/eye protection/face protection
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing
P310 - Immediately call a POISON CENTER or doctor/ physician
Hazards not otherwise classified
None known
Unknown acute toxicity Not applicable.
3. Composition/information on Ingredients
3.1 Substances
Not applicable
3.2 Mixtures
Chemical Name CAS No Weight-%
Sodium dodecylbenzenesulfonate 25155-30-0 1 - 5
Tetrapotassium diphosphate 7320-34-5 1 - 5
Alcohols, C10-16, ethoxylated, sulfates, sodium salts 68585-34-2 1 - 5
Reaction mass of (E)-3,7-dimethylocta-2,6-dienal and
(Z)-3,7-dimethylocta-2,6-dienal
5392-40-5 <0.1
Comments
The product contains other ingredients which do not contribute to the overall classification. The exact percentage (concentration) of
composition has been withheld as a trade secret
4. First aid measures
_____________________________________________________________________________________________
Page 2 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
4.1 First-Aid Measures
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Ingestion Rinse mouth. Do not induce vomiting without medical advice. Never give anything by mouth
to an unconscious person. Seek medical attention if irritation occurs.
Skin contact Wash off immediately with soap and plenty of water while removing all contaminated
clothes and shoes. Get medical attention immediately if symptoms occur.
Eye contact Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact
lenses, if present, after the first five minutes, then continue rinsing eye. Seek medical
attention at once.
4.2 Most important symptoms and effects, both acute and delayed
General advice The severity of the symptoms described will vary dependant of the concentration and the
length of exposure. If adverse symptoms develop, the casualty should be transferred to
hospital as soon as possible.
Main symptoms
Inhalation Please see Section 11. Toxicological Information for further information.
Ingestion Please see Section 11. Toxicological Information for further information.
Skin contact Please see Section 11. Toxicological Information for further information.
Eye contact Please see Section 11. Toxicological Information for further information.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician Treat symptomatically
5. Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Water Fog, Alcohol Foam, CO2, Dry Chemical.
Extinguishing media which must not be used for safety reasons
Water may be ineffective.
5.2 Special hazards arising from the substance or mixture
Unusual fire and explosion hazards
None known.
Hazardous combustion products
Fire or high temperatures create:, Carbon oxides (COx).
5.3 Advice for firefighters
Special protective equipment for fire-fighters
As in any fire, wear self-contained breathing apparatus and full protective gear.
_____________________________________________________________________________________________
Page 3 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
Special Fire-Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. See also section 8.
6.2 Environmental precautions
As local regulations may vary; all waste must be disposed/recycled/reclaimed in accordance with federal, state, and local
environmental control regulations.
Large spills released to the environment may disturb the natural chemical balance of soil/fresh water.
Environmental exposure controls
Avoid release to the environment. Local authorities should be advised if significant spillages cannot be contained.
6.3 Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so. Dike far ahead of liquid spill for later disposal.
Methods for cleaning up
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. After cleaning, flush away
traces with water.
6.4 Reference to other sections
See section 13 for more information.
7. Handling and storage
7.1 Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes. Do not breathe vapors or
spray mist. Avoid spills and splashing during use.
7.2 Conditions for safe storage, including any incompatibilities
Technical measures/precautions Ensure adequate ventilation.
Storage precautions Keep containers tightly closed in a dry, cool and well-ventilated place. Avoid: High
temperatures. Avoid contact with: Strong oxidizing agents
Packaging materials Use specially constructed containers only.
8. Exposure controls/personal protection
8.1 Control parameters
Chemical Name ACGIH TLV OSHA PEL
Sodium dodecylbenzenesulfonate Not determined Not determined
Tetrapotassium diphosphate Not determined Not determined
_____________________________________________________________________________________________
Page 4 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
Alcohols, C10-16, ethoxylated, sulfates, sodium salts Not determined Not determined
Reaction mass of (E)-3,7-dimethylocta-2,6-dienal and
(Z)-3,7-dimethylocta-2,6-dienal
5 ppm Not determined
8.2 Exposure controls
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard
present and the risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical
hazards associated with this product. Where this product is used in a mixture with other products or fluids, additional hazards may
be created and as such further assessment of risk may be required. The risk of exposure and need of respiratory protection will
vary from workplace to workplace and should be assessed by the user in each situation.
Engineering measures to reduce exposure
Ensure adequate ventilation. Mechanical ventilation or local exhaust ventilation is required.
Personal protective equipment
Eye protection Tightly fitting safety goggles.
Hand protection Use protective gloves made of: Nitrile Neoprene Be aware that liquid may penetrate the
gloves. Frequent change is advisable.
Respiratory Protection All respiratory protection equipment should be used within a comprehensive respiratory
protection program that meets the requirements of 29 CFR 1910.134 (U.S. OSHA
Respiratory Protection Standard) or local equivalent.If exposed to airborne mist/aerosol of
this product, use an organic vapor cartridge with a P-95 pre-filter attached. In work
environments containing oil mist/aerosol, use an organic vapor cartridge with a P-95
pre-filter attached.If exposed to vapors from this product, use a NIOSH/MSHA-approved
respirator with an organic vapor cartridge.
Skin and body protection Wear suitable protective clothing, Eye wash and emergency shower must be available at
the work place.
Hygiene measures Wash hands before eating, drinking or smoking, Remove and wash contaminated clothing
before re-use.
9. Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance Viscous
Color Pink
Odor Lemon
Odor threshold Not applicable
Physical state Liquid
Property Values Remarks
pH 8 - 10
pH @ dilution 7.5-8.5 @ 1%
Melting / freezing point No information available
Boiling point/range 100 °C / 212 °F
Flash point > 93 °C / > 200 °F PMCC
Evaporation rate (BuAc =1)< 1
Flammability (solid, gas)Not applicable
Flammability Limit in Air
Upper flammability limit No information available
Lower flammability limit No information available
Vapor pressure No information available
Vapor density No information available
Specific gravity 1.038
Bulk density No information available
Water solubility Soluble in water
_____________________________________________________________________________________________
Page 5 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
Explosive properties No information available
Oxidizing properties No information available
9.2 Other information
Pour point No information available
Molecular weight No information available
VOC content(%)0.07
Density No information available
10. Stability and reactivity
10.1 Reactivity
No specific reactivity hazards associated with this product.
10.2 Chemical stability
Stable under normal temperature conditions and recommended use.
10.3 Possibility of Hazardous Reactions
Hazardous polymerization
Hazardous polymerization does not occur.
10.4 Conditions to avoid
High temperatures.
10.5 Incompatible materials
Strong oxidizing agents.
10.6 Hazardous decomposition products
See also section 5.2.
11. Toxicological information
11.1 Information on toxicological effects
Acute toxicity
Inhalation Vapors may irritate throat and respiratory system.
Eye contact Causes serious eye damage.
Skin contact Prolonged contact may cause redness and irritation.
Ingestion Ingestion may cause stomach discomfort.
Solubility in other solvents No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity No information available
Dynamic viscosity 145 cP
log Pow No information available
_____________________________________________________________________________________________
Page 6 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
Toxicology data for the components
Chemical Name LD50 Oral LD50 Dermal LC50 Inhalation
Sodium dodecylbenzenesulfonate = 438 mg/kg ( Rat ) = 500
mg/kg ( Rat )
No data available No data available
Tetrapotassium diphosphate No data available > 4640 mg/kg ( Rabbit )No data available
Alcohols, C10-16, ethoxylated, sulfates, sodium
salts
No data available No data available No data available
Reaction mass of (E)-3,7-dimethylocta-2,6-dienal
and (Z)-3,7-dimethylocta-2,6-dienal
= 4960 mg/kg ( Rat )= 2250 mg/kg ( Rabbit )No data available
Chemical Name IARC Group 1 or 2 ACGIH - Carcinogens OSHA listed carcinogens NTP
Sodium dodecylbenzenesulfonate No data available No data available No data available No data available
Tetrapotassium diphosphate No data available No data available No data available No data available
Alcohols, C10-16, ethoxylated,
sulfates, sodium salts
No data available No data available No data available No data available
Reaction mass of
(E)-3,7-dimethylocta-2,6-dienal and
(Z)-3,7-dimethylocta-2,6-dienal
No data available A4 Not Classifiable as a
Human Carcinogen
No data available No data available
Sensitization Not classified.
Mutagenic effects This product does not contain any known or suspected mutagens.
Carcinogenicity This product does not contain any known or suspected carcinogens.
Reproductive toxicity This product does not contain any known or suspected reproductive hazards.
Developmental toxicity Not known to cause birth defects or have a deleterious effect on a developing fetus.
Routes of exposure Eye contact. Skin contact.
Routes of entry Eye contact.
Specific target organ toxicity -
Single exposure
Not classified
Specific target organ toxicity -
Repeated exposure
Not classified.
Aspiration hazard Not classified.
12. Ecological information
12.1 Toxicity
Toxicity to algae
This product is not considered toxic to algae.
Toxicity to fish
This product is not considered toxic to fish.
Toxicity to daphnia and other aquatic invertebrates
This product is not considered toxic to invertebrates.
Chemical Name Toxicity to fish Toxicity to algae Toxicity to daphnia and other
_____________________________________________________________________________________________
Page 7 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
aquatic invertebrates
Sodium dodecylbenzenesulfonate = 10.8 mg/L LC50 Oncorhynchus
mykiss 96 h
No information available No information available
Tetrapotassium diphosphate > 100 mg/L LC50 Oncorhynchus
mykiss 96 h
No information available > 100 mg/L EC50 water flea 48 h
Alcohols, C10-16, ethoxylated,
sulfates, sodium salts
No information available No information available No information available
Reaction mass of
(E)-3,7-dimethylocta-2,6-dienal and
(Z)-3,7-dimethylocta-2,6-dienal
4.6 - 10 mg/L LC50 Leuciscus idus
96 h
= 19 mg/L EC50 Desmodesmus
subspicatus 96 h = 16 mg/L EC50
Desmodesmus subspicatus 72 h
= 7 mg/L EC50 Daphnia magna 48
h
12.2 Persistence and degradability
No product level data available.
12.3 Bioaccumulative potential
No product level data available.
12.4 Mobility in soil
Soluble in water.
12.5 Results of PBT and vPvB assessment
This preparation contains no substance considered to be persistent, bioaccumulating nor toxic (PBT)
This preparation contains no substance considered to be very persistent nor very bioaccumulating (vPvB)
12.6 Other adverse effects.
None known.
13. Disposal considerations
13.1 Waste treatment methods
Disposal Method Disposal should be made in accordance with federal, state and local regulations.
Contaminated packaging Empty containers should be taken for local recycling, recovery or waste disposal.
14. Transport information
14.1. UN number
Not regulated
UN No. (DOT)Not regulated
UN No. (TDG)Not regulated
UN/ID No. (ADR/RID/ADN/ADG)Not regulated
UN No. (IMDG)Not regulated
UN No. (ICAO)Not regulated
14.2. UN proper shipping name
The product is not covered by international regulation on the transport of dangerous goods
14.3 Hazard class(es)
DOT Hazard class Not regulated
_____________________________________________________________________________________________
Page 8 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
TDG Hazard class Not regulated
ADR/RID/ADN/ADG Hazard class Not regulated
IMDG Hazard class Not regulated
ICAO Hazard class/division Not regulated
14.4 Packing group
DOT Packing group Not regulated
TDG Packing group Not regulated
ADR/RID/ADN/ADG Packing group Not regulated
IMDG Packing group Not regulated
ICAO Packing group Not regulated
14.5 Environmental hazard
Marine pollutant No
14.6 Special precautions
Not applicable
14.7 Transport in bulk according to Annex I/II of MARPOL 73/78 and the IBC Code
Please contact [e-mail] for info regarding transport in Bulk.
15. Regulatory information
International inventories
USA (TSCA)Complies
Canada (DSL)Complies
European Union (EINECS and ELINCS)Complies
Philippines (PICCS)Complies
Japan (ENCS)Does not Comply
China (IECSC)Complies
Australia (AICS)Complies
Korean (KECL)Complies
New Zealand (NZIoC)Complies
IMPORTS, Canada
No import volume restrictions.
U.S. Federal and State Regulations
SARA 311/312 Hazard Categories
Immediate (acute) health hazard.
Chemical Name SARA 302 / TPQs SARA 313 CERCLA RQ
Sodium dodecylbenzenesulfonate N/A N/A 1000 lb final RQ
454 kg final RQ
Tetrapotassium diphosphate N/A N/A N/A
Alcohols, C10-16, ethoxylated, sulfates,
sodium salts
N/A N/A N/A
Reaction mass of
(E)-3,7-dimethylocta-2,6-dienal and
(Z)-3,7-dimethylocta-2,6-dienal
N/A N/A N/A
_____________________________________________________________________________________________
Page 9 / 10
_____________________________________________________________________________________________
PLATINUM D-D*SDS no. PID12350
Revision date 05/Apr/2017
State Comments
Proposition 65: This product is not known to contain chemicals considered by the State of California's Safe Drinking Water and
Toxic Enforcement Act of 1986 as causing cancer and/or reproductive toxicity at levels that are expected to pose a significant risk
under anticipated use conditions.
Canadian Classification
This Safety Data Sheet has been prepared in compliance with the Hazardous Products Regulations.
16. Other information
Supersedes date 10/Oct/2016
Revision date 05/Apr/2017
Version 3
This SDS has been revised in the
following section(s)
1, 2, 8, 9, 10, 14, 15, 16. Updated according to WHMIS 2015.
HMIS classification
Health 2
Flammability 1
Physical hazard 0
PPE X
*A mark of M-I L.L.C., a Schlumberger Company
Disclaimer
The information contained herein is considered in good faith as reliable of the date issued and is based upon on
measurements, tests or data derived from supplier’s own study or furnished by others. In providing this SDS
information, Supplier makes no express or implied warranties as to the information or product; merchantability or fitness
of purpose; any express or implied w arranty; or non-infringement of intellectual property rights; and supplier assumes no
responsibility for any direct, special or consequential damages, results obtained, or the activities of others. To the
maximum extent permitted by law, supplier’s warranty obligations and buyer’s sole remedies are as stated in separate
agreement between the parties.
_____________________________________________________________________________________________
Page 10 / 10
Revision Date 15-Jun-12
Revision 1
Supersedes date 13-May-12
SDS No. 12588
SAFETY DATA SHEET
PLATINUM PAC* (ALL GRADES)
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1. Product identifier
Product name PLATINUM PAC* (ALL GRADES)
Synonyms, Trade Names PLATINUM PAC*, PLATINUM PAC UL*
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Oil well drilling fluid additive.
1.3. Details of the supplier of the safety data sheet
M-I SWACOSupplier
A Schlumberger Company
Woodlands Drive,
Kirkhill Industrial Estate,
Dyce, Aberdeen AB21 0GW.
Scotland UK
T = [phone]
F = [phone]
E-mail = [e-mail]
1.4. Emergency telephone number
(24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe [phone], Middle East and
Africa [phone], New Zealand [phone], USA 001 281 561 1600.
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
Classification (1999/45/EEC)Not classified.
2.2. Label elements
Risk Phrases
NC Not classified.
Safety Phrases
NC Not classified.
2.3. Other hazards
Not Classified as PBT/vPvB by current EU criteria.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
POLYANIONIC CELLULOSE 60-100%
Classification (67/548/EEC)
Not classified.
Classification (EC 1272/2008)
Not classified.
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
Composition Comments
The data shown is in accordance with the latest EC Directives.
SECTION 4: FIRST AID MEASURES
61/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
4.1. Description of first aid measures
Inhalation
Move the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Get medical attention if any discomfort
continues.
Ingestion
Do not induce vomiting. Immediately give a couple of glasses of water or milk, provided the victim is fully conscious. Get medical attention if
any discomfort continues.
Skin contact
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if symptoms occur after
washing.
Eye contact
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation.
Irritation of nose, throat and airway.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged skin contact may cause redness and irritation.
Eye contact
May cause temporary eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Get medical attention if any discomfort continues.
SECTION 5: FIREFIGHTING MEASURES
5.1. Extinguishing media
Extinguishing media
Use fire-extinguishing media appropriate for surrounding materials.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products
When heated, vapours/gases hazardous to health may be formed.
Unusual Fire & Explosion Hazards
High concentrations of dust may form explosive mixture with air.
5.3. Advice for firefighters
Special Fire Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
Protective equipment for fire-fighters
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective clothing as described in Section 8 of this safety data sheet.
6.2. Environmental precautions
Do not allow to enter drains, sewers or watercourses.
6.3. Methods and material for containment and cleaning up
Avoid generation and spreading of dust. Remove spillage with vacuum cleaner. If not possible, collect spillage with shovel, broom or the like.
Ensure that waste and contaminated materials are collected and removed from the work area as soon as possible in a suitably labelled
container. Product becomes slippery when wet.
6.4. Reference to other sections
Wear protective clothing as described in Section 8 of this safety data sheet.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for safe handling
Avoid inhalation of dust and contact with skin and eyes. Avoid handling which leads to dust formation.
62/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
7.2. Conditions for safe storage, including any incompatibilities
Store in tightly closed original container in a dry, cool and well-ventilated place.
7.3. Specific end use(s)
The identified uses for this product are detailed in Section 1.2.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Ingredient Comments
NUI = Nuisance dust, WEL TWA 4mg/m3 Respirable Dust, 10 mg/m3 Total Dust.
8.2. Exposure controls
Protective equipment
Process conditions
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard present and the
risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical hazards associated with this
product. Where this product is used in a mixture with other products or fluids, additional hazards may be created and as such further
assessment of risk may be required. The risk of exposure and need of respiratory protection will vary from workplace to workplace and should
be assessed by the user in each situation.
Engineering measures
Provide adequate general and local exhaust ventilation.
Respiratory equipment
In case of inadequate ventilation or risk of inhalation of dust, use suitable respiratory equipment with particle filter (type P2).
Hand protection
For prolonged or repeated skin contact use suitable protective gloves. Use protective gloves made of: Nitrile. or Neoprene.
Eye protection
Wear approved chemical safety goggles where eye exposure is reasonably probable.
Other Protection
Wear appropriate clothing to prevent any possibility of skin contact. Provide eyewash station.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance Solid
Colour White to yellow
Odour Odourless.
Solubility Soluble in water.
Relative density 0.3-0.5 sg
Bulk Density 300-900 kg/m3
pH-Value, Diluted Solution 6.0-8.5 @ 1%
9.2. Other information
Not relevant
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stable under normal temperature conditions and recommended use.
10.3. Possibility of hazardous reactions
Not known.
10.4. Conditions to avoid
63/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
Avoid heat, flames and other sources of ignition. Avoid contact with water.
10.5. Incompatible materials
Materials To Avoid
Avoid contact with: Strong oxidising substances.
10.6. Hazardous decomposition products
When heated, vapours/gases hazardous to health may be formed.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1. Information on toxicological effects
Aspiration hazard:
Not anticipated to present an aspiration hazard based on chemical structure.
Inhalation
Dust may irritate respiratory system or lungs.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged and frequent contact may cause redness and irritation.
Eye contact
Particles in the eyes may cause irritation and smarting.
Route of entry
No route of entry noted.
Target Organs
No specific target organs noted
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity
Contact M-I SWACO's QHSE Department for ecological information at [e-mail].
12.1. Toxicity
Acute Fish Toxicity
Not considered toxic to fish.
12.2. Persistence and degradability
Degradability
There are no data on the degradability of this product.
12.3. Bioaccumulative potential
Bioaccumulative potential
No data available on bioaccumulation.
12.4. Mobility in soil
Mobility:
The product is soluble in water.
12.5. Results of PBT and vPvB assessment
Not Classified as PBT/vPvB by current EU criteria.
12.6. Other adverse effects
None known.
64/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Recover and reclaim or recycle, if practical. Dispose of waste and residues in accordance with local authority requirements.
SECTION 14: TRANSPORT INFORMATION
General The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,
ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
Not applicable.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally Hazardous Substance/Marine Pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not applicable.
SECTION 15: REGULATORY INFORMATION
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Uk Regulatory References
Chemicals (Hazard Information & Packaging) Regulations. Control of Substances Hazardous to Health Regulations 2002 (as amended)
Workplace Exposure Limits EH40.
EU Legislation
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and
repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and
Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.
Water hazard classification
WGK 1
15.2. Chemical Safety Assessment
International Chemical Inventories
Contact [e-mail] for REACH information. Complies with the following national/regional chemical inventory requirements:
Australia (AICS), Canada (DSL / NDSL), China (IECSC), Europe (EINECS / ELINCS), Japan (METI / ENCS), Korea (TCCL / ECL), New
Zealand (NZIoC), Phillipines (PICCS), United States (TSCA).
SECTION 16: OTHER INFORMATION
Abbreviations and acronyms used in the safety data sheet
*a mark of M-I L.L.C.
General information
HMIS Health -1 HMIS Flammability - 1 HMIS Physical Hazard - 0 E - Safety glasses, Gloves, Dust Respirator
Information Sources
Product information provided by the commercial vendor(s). Material Safety Data Sheet, Misc. manufacturers. LOLI. European Chemicals
Bureau - ESIS (European Chemical Substances Information).
Revision Comments
General revision. Compiled or revised by Sarah Malone
65/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
Issued By Bill Cameron
Revision Date 15-Jun-12
Revision 1
Supersedes date 13-May-12
SDS No.12588
Risk Phrases In Full
Not classified.NC
Disclaimer
MSDS furnished independent of product sale. While every effort has been made to accurately describe this product, some of the data are obtained from
sources beyond our direct supervision. We cannot make any assertions as to its reliability or completeness; therefore, user may rely only at user's risk. We
have made no effort to censor or conceal deleterious aspects of this product. Since we cannot anticipate or control the conditions under which this
information and product may be used, we make no guarantee that the precautions we have suggested will be adequate for all individuals and/or situations. It
is the obligation of each user of this product to comply with the requirements of all applicable laws regarding use and disposal of this product. Additional
information will be furnished upon request to assist the user; however, no warranty, either expressed or implied, nor liability of any nature with respect to this
product or to the data herein is made or incurred hereunder.
66/
MiSWACt� ENVIRONMENTAL
A Schlumberger Company LABORATORY REPORT
AQUATIC TOXICITY EVALUATION
2% (v/v) EHD-2193 (Platinum Rod Ease) in Generic Mud # 7
The 96 -hour acute, aquatic toxicity of the laboratory prepared drilling fluid sample (ES -6080) is
described in this report. Environmental Affairs of M-1 SWACO began an investigation to establish
the level of toxicity of the drilling fluid sample on 12/3/2009. The sample was submitted by G.
Matula. The results are presented below.
Bioassay Results
i
A 96 -hour range finder bioassay using the standard EPA protocol was conducted on a suspended
particulate phase (SPP) of the sample using Mysidopsis bahia. The SPP is the unfiltered
supernatant extracted from a 1:9 mixture of the drilling fluid and seawater that was allowed to
settle for one hour. A 96 -hour LC50 of >500,000 ppm SPP was determined for the drilling fluid. A
95% confidence interval of N.A. to N.A. ppm SPP was obtained for the drilling fluid sample. The
LC50 is the median lethal concentration or the quantity of a toxic substance in the surrounding
water that produces 50% mortality in the test species. The greater the 96 -hour LC50 value, the
lower the toxicity of the drilling fluid sample being tested. The negative control (20 mysids in
straight seawater) showed 100% survivability.
Conclusions
The results of this bioassay indicate that the 96 -hour LC50 for this laboratory prepared sample
(>500,000 ppm SPP) is greater (i.e. less toxic) than the 30,000 qpm SPP toxicity limitation set by
the Gulf of Mexico NPDES permit.
This information is being provided for internal use and should not be utilized for any legal or
official regulatory compliance purposes.
Prepared by:
Approved by:
Sample ID:
Page 1 of 1 12/7/2009
c•1:
Notice: This report is limited to the described sample tested. Any person using or relying on this report agrees that M-1 L.L.C. shall
not be liable for any loss or damage, whether due to act or omission, resulting from such report or its use.

Revision Date 26-10-11
Revision 0
SDS No. 15162
SAFETY DATA SHEET
PLATINUM ROD EASE*
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1. Product identifier
Product name PLATINUM ROD EASE*
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Lubricant.
1.3. Details of the supplier of the safety data sheet
M-I SWACOSupplier
A Schlumberger Company
Endeavour Drive
Arnhall Business Park, Westhill
Aberdeen AB32 6UF
Scotland UK
T = [phone]
F = [phone]
E-mail = [e-mail]
1.4. Emergency telephone number
(24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe [phone], Middle East
and Africa [phone], USA 001 281 561 1600.
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
Classification (1999/45/EEC)Not classified.
2.2. Label elements
Risk Phrases
NC Not classified.
Safety Phrases
NC Not classified.
2.3. Other hazards
Not Classified as PBT/vPvB by current EU criteria.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
VEGETABLE OIL 60-100%
Classification (67/548/EEC)
Not classified.
Classification (EC 1272/2008)
Not classified.
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
Composition Comments
The data shown is in accordance with the latest EC Directives.
SECTION 4: FIRST AID MEASURES
4.1. Description of first aid measures
51/
SDS No. 15162
PLATINUM ROD EASE*
Inhalation
Move the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Get medical attention if any discomfort
continues.
Ingestion
Immediately give a couple of glasses of water or milk, provided the victim is fully conscious. Get medical attention if any discomfort
continues.
Skin contact
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if symptoms occur after
washing.
Eye contact
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation.
This is unlikely to occur but symptoms similar to those of ingestion may develop.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged skin contact may cause redness and irritation.
Eye contact
May cause temporary eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Get medical attention if any discomfort continues.
SECTION 5: FIREFIGHTING MEASURES
5.1. Extinguishing media
Extinguishing media
Foam, carbon dioxide or dry powder.
Unsuitable extinguishing media
Do not use water as extinguisher as mixing water with hot or molten product may cause violent spattering due to rapid steam generation.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products
When heated, vapours/gases hazardous to health may be formed.
5.3. Advice for firefighters
Special Fire Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
Protective equipment for fire-figthers
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective clothing as described in Section 8 of this safety data sheet.
6.2. Environmental precautions
Do not allow to enter drains, sewers or watercourses.
6.3. Methods and material for containment and cleaning up
Stop leak if possible without risk. Dike far ahead of larger spills for later disposal. Absorb spillage with suitable absorbent material. Shovel
into dry containers. Cover and move the containers. Flush the area with water.
6.4. Reference to other sections
Wear protective clothing as described in Section 8 of this safety data sheet.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for safe handling
Avoid spilling, skin and eye contact. Avoid inhalation of vapours and spray mists.
7.2. Conditions for safe storage, including any incompatibilities
Store in tightly closed original container in a dry, cool and well-ventilated place.
52/
SDS No. 15162
PLATINUM ROD EASE*
7.3. Specific end use(s)
The identified uses for this product are detailed in Section 1.2.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Ingredient Comments
No exposure limits noted for ingredient(s).
8.2. Exposure controls
Protective equipment
Engineering measures
Provide adequate general and local exhaust ventilation.
Respiratory equipment
No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air
contamination exists.
Hand protection
For prolonged or repeated skin contact use suitable protective gloves. Neoprene gloves are recommended.
Eye protection
Wear approved chemical safety goggles where eye exposure is reasonably probable.
Other Protection
Wear appropriate clothing to prevent any possibility of skin contact. Provide eyewash station.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance Liquid
Colour Dark. Brown.
Odour Mild. Characteristic.
Solubility Disperses.
Flash point (°C)>188°C PM Closed cup.
9.2. Other information
Not relevant
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stable under normal temperature conditions and recommended use.
10.3. Possibility of hazardous reactions
Not known.
10.4. Conditions to avoid
Not known.
10.5. Incompatible materials
Materials To Avoid
Avoid contact with: Strong alkalis. Strong oxidising substances.
10.6. Hazardous decomposition products
When heated, vapours/gases hazardous to health may be formed.
SECTION 11: TOXICOLOGICAL INFORMATION
53/
SDS No. 15162
PLATINUM ROD EASE*
11.1. Information on toxicological effects
Inhalation
Gas or vapour in high concentrations may irritate respiratory system.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged and frequent contact may cause redness and irritation. Contact with hot or molten material can cause severe thermal burns.
Eye contact
Spray and vapour in the eyes may cause irritation and smarting. Contact with hot or molten material can cause severe thermal burns.
Route of entry
No route of entry noted.
Target Organs
No specific target organs noted
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity
Contact M-I SWACO's QHSE Department for ecological information at [e-mail].
12.1. Toxicity
Acute Fish Toxicity
Not considered toxic to fish.
12.2. Persistence and degradability
Degradability
There are no data on the degradability of this product.
12.3. Bioaccumulative potential
Bioaccumulative potential
No data available on bioaccumulation.
12.4. Mobility in soil
Mobility:
Disperses.
12.5. Results of PBT and vPvB assessment
Not Classified as PBT/vPvB by current EU criteria.
12.6. Other adverse effects
None known.
SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Recover and reclaim or recycle, if practical. Dispose of waste and residues in accordance with local authority requirements.
SECTION 14: TRANSPORT INFORMATION
General The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,
ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
Not applicable.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
54/
SDS No. 15162
PLATINUM ROD EASE*
Environmentally Hazardous Substance/Marine Pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not applicable.
SECTION 15: REGULATORY INFORMATION
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Uk Regulatory References
Chemicals (Hazard Information & Packaging) Regulations. Control of Substances Hazardous to Health Regulations 2002 (as amended)
Workplace Exposure Limits EH40.
EU Legislation
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration,
Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive
1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive
76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.
15.2. Chemical Safety Assessment
International Chemical Inventories
Contact [e-mail] for REACH information. Complies with the following national/regional chemical inventory requirements:
Australia (AICS), Canada (DSL / NDSL), China (IECSC), Europe (EINECS / ELINCS), Korea (TCCL / ECL), New Zealand (NZIoC),
Phillipines (PICCS), United States (TSCA).
SECTION 16: OTHER INFORMATION
Abbreviations and acronyms used in the safety data sheet
*a mark of M-I L.L.C.
Information Sources
Product information provided by the commercial vendor(s). Material Safety Data Sheet, Misc. manufacturers. LOLI. European Chemicals
Bureau - ESIS (European Chemical Substances Information).
Revision Comments
This is first issue. Compiled or revised by Sandra McWilliam
Issued By Bill Cameron
Revision Date 26-10-11
Revision 0
SDS No.15162
Risk Phrases In Full
Not classified.NC
Disclaimer
MSDS furnished independent of product sale. While every effort has been made to accurately describe this product, some of the data are obtained from
sources beyond our direct supervision. We cannot make any assertions as to its reliability or completeness; therefore, user may rely only at user's risk.
We have made no effort to censor or conceal deleterious aspects of this product. Since we cannot anticipate or control the conditions under which this
information and product may be used, we make no guarantee that the precautions we have suggested will be adequate for all individuals and/or
situations. It is the obligation of each user of this product to comply with the requirements of all applicable laws regarding use and disposal of this
product. Additional information will be furnished upon request to assist the user; however, no warranty, either expressed or implied, nor liability of any
nature with respect to this product or to the data herein is made or incurred hereunder.
55/
Safety data sheet number MI11010
Version 5
Revision date 30/Oct/2014
Supercedes date 02/Aug/2010
Safety Data Sheet
POLY-PLUS* DRY
1. Identification of the substance/preparation and of the Company/undertaking
1.1 Product identifier
Product name POLY-PLUS* DRY
Product code MI11010
REACH Registration Name Exempt
1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended use Shale stabilizer.
Uses advised against Consumer use
1.3 Details of the supplier of the safety data sheet
1.4 Emergency Telephone Number
Emergency telephone - (24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe +44
(0) 1235 239 670, Middle East and Africa [phone], New Zealand [phone], USA 001 281 561 1600
2. Hazards identification
2.1 Classification of the substance or mixture
Regulation (EC) No. 1272/2008
Health hazards Not classified
Environmental hazards Not classified
Physical Hazards Not classified
2.2 Label Elements
Signal word
None
Hazard statements
Supplier
M-I Drilling Fluids UK Limited
C/O Schlumberger
Enterprise Drive
Westhill Industrial Estate
Westhill, AB32 6TQ
Scotland UK
[phone]
[e-mail]
________________________________________________________________________________________
Page 1 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
This product is not classified as hazardous therefore no (H) hazard statements assigned.
Precautionary Statements - EU (§28, 1272/2008)
This product is not classified as hazardous therefore has no (P) precautionary statements assigned.

Classification according to EU Directives 67/548/EEC or 1999/45/EC
Indication of danger
Not classified
Contains
For the full text of the R-phrases and H-Statements mentioned in this Section, see Section 16.
2.3 Other data
Not classified as PBT/vPvB by current EU criteria
3. Composition/information on ingredients
3.1 Substances
Not Applicable
3.2 Mixtures
Not Applicable
Comments
No classified ingredients, or those having occupational exposure limits, present above the level of disclosure.
4. First aid measures
4.1 First Aid
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Ingestion Rinse mouth. Do not induce vomiting without medical advice. Never give anything by mouth
to an unconscious person. Get medical attention if symptoms occur.
Skin contact Wash off immediately with soap and plenty of water removing all contaminated clothes and
shoes. Get medical attention immediately if symptoms occur.
Eye contact Remove contact lenses. Promptly wash eyes with lots of water while lifting eye lids.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
________________________________________________________________________________________
Page 2 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
4.2 Most important symptoms and effects, both acute and delayed
General advice The severity of the symptoms described will vary dependant of the concentration and the
length of exposure. If adverse symptoms develop, the casualty should be transferred to
hospital as soon as possible.
Main symptoms
Inhalation Please see Section 11. Toxicological Information for further information.
Ingestion Please see Section 11. Toxicological Information for further information.
Skin contact Please see Section 11. Toxicological Information for further information.
Eye contact Please see Section 11. Toxicological Information for further information.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician Treat symptomatically.
5. Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Water Fog, Alcohol Foam, CO2, Dry Chemical.
Extinguishing media which shall not be used for safety reasons
None known.
5.2 Special hazards arising from the substance or mixture
Unusual fire and explosion hazards
None known.
Hazardous combustion products
Fire or high temperatures create:, Carbon oxides (COx), Nitrogen oxides (NOx).
5.3 Advice for firefighters
Special protective equipment for fire-fighters
As in any fire, wear self-contained breathing apparatus and full protective gear.
Special Fire-Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. See also section 8. If spilled, take caution, as material can cause surfaces to become very
slippery.
________________________________________________________________________________________
Page 3 / 11
6.2 Environmental precautions
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
The product should not be allowed to enter drains, water courses or the soil.
Environmental exposure controls
Avoid release to the environment. Local authorities should be advised if significant spillages cannot be contained.
6.3 Methods and materials for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Methods for cleaning up
Sweep up and shovel into suitable containers for disposal. After cleaning, flush away traces with water.
6.4 Reference to other sections
See section 13 for more information.
7. Handling and storage
7.1 Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes. Avoid dust formation.
Remove all sources of ignition. If spilled, take caution, as material can cause surfaces to become very slippery.
Hygiene measures
Use good work and personal hygiene practices to avoid exposure When using do not smoke, eat or drink. Wash hands and face
before breaks and immediately after handling the product. Remove contaminated clothing.
7.2 Conditions for safe storage, including any incompatibilities
Technical measures/precautions Ensure adequate ventilation. Keep airborne concentrations below exposure limits.
Storage precautions Keep containers tightly closed in a dry, cool and well-ventilated place. Avoid contact with:
Oxidizing agents
Storage class Chemical storage.
Packaging material Use specially constructed containers only
7.3 Specific end uses
See Section 1.2.
8. Exposure controls/personal protection
8.1 Control parameters
Exposure limits Contains no substances with occupational exposure limit values
________________________________________________________________________________________
Page 4 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
8.2 Exposure controls
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard
present and the risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical
hazards associated with this product. Where this product is used in a mixture with other products or fluids, additional hazards may
be created and as such further assessment of risk may be required. The risk of exposure and need of respiratory protection will
vary from workplace to workplace and should be assessed by the user in each situation.
Engineering measures to
reduce exposure
Ensure adequate ventilation. Mechanical ventilation or local exhaust ventilation is required.
Personal protective equipment
Eye protection It is good practice to wear goggles when handling any chemical. Tightly fitting safety
goggles.
Hand protection Repeated or prolonged contact:, Use protective gloves made of:, Rubber gloves.
Respiratory protection Respirator must be worn if exposed to dust, Half mask with a particle filter P2 (BS EN 143).
Skin and body protection Wear suitable protective clothing, Eye wash and emergency shower must be available at
the work place.
Hygiene measures Wash hands before eating, drinking or smoking, Remove and wash contaminated clothing
before re-use.
9. Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance Powder Dust
Physical state
________________________________________________________________________________________
Page 5 / 11
Granular
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
Odour Odourless
Colour White
Odor threshold Not applicable
Explosive properties No information available
Oxidizing properties No information available
9.2 Other information
Pour point No information available
Molecular weight No information available
VOC content(%)No information available
Density VALUE No information available
10. Stability and reactivity
10.1 Reactivity
No specific reactivity hazards associated with this product.
10.2 Chemical stability
Stable under normal temperature conditions and recommended use.
10.3 Possibility of Hazardous Reactions
Hazardous polymerization
Hazardous polymerisation does not occur.
10.4 Conditions to avoid
None known.
Property Values Remarks
pH No information available
pH @ dilution 4 - 6 @ 5 g/l
Melting/freezing point No information available
Boiling point/range No information available
Flash Point No information available
Evaporation rate
Flammability (solid, gas)Not Applicable
Flammability Limits in Air
Upper flammability Limit Not applicable
Lower flammability limit Not applicable
Vapor pressure No information available
Vapor density No information available
Specific gravity No information available
Bulk density 641-737 kg/m³
Relative density 1.25 - 1.40 sg @ 20 °C.
Water solubility Soluble in water
Solubility in other solvents No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity
Viscosity, dynamic No information available
Log Pow No information available
________________________________________________________________________________________
Page 6 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
10.5 Incompatible materials
Oxidizing agents.
10.6 Hazardous decomposition products
See also section 5.2.
11. Toxicological information
11.1 Information on toxicological effects
Acute toxicity
Inhalation Inhalation of dust in high concentration may cause irritation of respiratory system.
Eye contact May cause slight irritation.
Skin contact Prolonged contact may cause redness and irritation.
Ingestion Ingestion may cause stomach discomfort.
Unknown acute toxicity Not Applicable.
LD50 Oral > 5000 mg/kg (rat)
Sensitisation This product does not contain any components suspected to be sensitizing.
Mutagenic effects This product does not contain any known or suspected mutagens.
Carcinogenicity This product does not contain any known or suspected carcinogens.
Reproductive toxicity This product does not contain any known or suspected reproductive hazards.
Routes of exposure Inhalation.
Routes of entry Inhalation.
Specific target organ toxicity (single
exposure)
Not classified
Specific target organ toxicity
(repeated exposure)
Not classified.
Aspiration hazard No hazard from product as supplied.
________________________________________________________________________________________
Page 7 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
12. Ecological information
12.1 Toxicity
The product component(s) are not classified as environmentally hazardous. However, this does not exclude the possibility that
large or frequent spills can have a harmful or damaging effect on the environment.
Toxicity to algae
This product is not considered toxic to algae.
Toxicity to fish
This product is not considered toxic to fish.
Toxicity to daphnia and other aquatic invertebrates
This product is not considered toxic to invertebrates.
12.2 Persistence and degradability
The product is not biodegradable.
12.3 Bioaccumulative potential
Does not bioaccumulate.
12.4 Mobility in soil
Mobility
Soluble in water.
12.5 Results of PBT and vPvB assessment
Not classified as PBT/vPvB by current EU criteria.
12.6 Other adverse effects.
None known.
________________________________________________________________________________________
Page 8 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
13. Disposal considerations
13.1 Waste treatment methods
Waste from residues / unused
products
Dispose of in accordance with local regulations.
Contaminated packaging Empty containers should be transported/delivered using a registered waste carrier for local
recycling or waste disposal.
EWC waste disposal No.According to the European Waste Catalogue, Waste Codes are not product specific, but
application specific. Waste codes should be assigned by the user based on the application
for which the product was used. The following Waste Codes are only suggestions: EWC
waste disposal No: 01 05 99
14. Transport information
14.1 UN number
Not regulated
14.2 Proper shipping name
The product is not covered by international regulation on the transport of dangerous goods
14.3. Hazard class(es)
ADR/RID/ADN/ADG Hazard class Not regulated
IMDG Hazard class Not regulated
ICAO Hazard class/division Not regulated
14.4 Packing group
ADR/RID/ADN/ADG Packing Group Not regulated
IMDG Packing group Not regulated
ICAO Packing group Not regulated
14.5 Environmental hazard
No
14.6 Special precautions
Not Applicable
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Please contact [e-mail] for info regarding transport in Bulk.
15. Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Germany, Water Endangering
Classes (VwVwS)
Water endangering class = 2
________________________________________________________________________________________
Page 9 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
Commission Regulation (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European
Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals
Agency, amending Directive 1999/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC)
No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and
2000/21/EC, including amendments.
This safety data sheet complies with the requirements of Regulation (EC) No. 1272/2008.
Occupational Safety and Health (Classification, Labelling and Safety Data Sheet of Hazardous Chemicals) Regulations
2013 [P.U.(A) 310/2013] (CLASS Regulations)
The Industry Code of Practice on Chemical Classification and Hazard Communication 2014 [P.U. (B) 128/2014] (ICOP)
International inventories
USA, Toxic Substances Control Act inventory (TSCA)Complies
European Union - EINECS and ELINCS Complies
Canada, Domestic Substance List (DSL)Complies
Philippines (PICCS)Complies
Inventory - Japan - Existing and New Chemicals list Complies
China (IECSC)Complies
Australia (AICS)Complies
Korea (KECL)Complies
Inventory - New Zealand - Inventory of Chemicals (NZIoC)Complies
Contact [e-mail] for REACH information.
15.2 Chemical Safety Report
No information available
16. Other information
Prepared by Global Regulatory Compliance - Chemicals (GRC - Chemicals) , Anne Karin (Anka) Fosse
Supercedes date 02/Aug/2010
Revision date 30/Oct/2014
Version 5
The following sections have been
revised:
This SDS have been made in a new database and therefore a new layout. No changes with
regard to classification have been made, Updated according to GHS/CLP.
Text of R phrases mentioned in Section 3
None
________________________________________________________________________________________
Page 10 / 11
________________________________________________________________________________________
POLY-PLUS* DRY
Safety data sheet number MI11010
Revision date 30/Oct/2014
Full text of H-Statements referred to under sections 2 and 3
This product is not classified as hazardous therefore no (H) hazard statements assigned.
Not classified
*A mark of M-I L.L.C., a Schlumberger Company
Disclaimer
The information contained herein is considered in good faith as reliable of the date issued and is based upon on
measurements, tests or data derived from supplier’s own study or furnished by others. In providing this SDS
information, Supplier makes no express or implied warranties as to the information or product; merchantability or fitness
of purpose; any express or implied w arranty; or non-infringement of intellectual property rights; and supplier assumes no
responsibility for any direct, special or consequential damages, results obtained, or the activities of others. To the
maximum extent permitted by law, supplier’s warranty obligations and buyer’s sole remedies are as stated in separate
agreement between the parties.
________________________________________________________________________________________
Page 11 / 11
Revision Date 27-06-2013
Revision 3
Supersedes date 03-11-2009
SDS No. 11023
SAFETY DATA SHEET
RINGFREE*
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1. Product identifier
Product name RINGFREE*
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Drilling fluid additive
1.3. Details of the supplier of the safety data sheet
M-I Australia Pty LtdSupplier
ABN: 67 009 214 162
Level 5
256 St. George Tce
Perth
WA 6000
T = [phone]
F = [phone]
Contact Person [e-mail]
1.4. Emergency telephone number
(24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe [phone], Middle East
and Africa [phone], New Zealand [phone], USA 001 281 561 1600.
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
Classification (1999/45/EEC)Not classified.
2.2. Label elements
Risk Phrases
NC Not classified.
Safety Phrases
NC Not classified.
Australian statement of hazardous/dangerous nature
Classified as Non-Hazardous according to the criteria of NOHSC.
NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS.
2.3. Other hazards
Not Classified as PBT/vPvB by current EU criteria.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
Composition Comments
The data shown is in accordance with the latest EC Directives. This product does not contain any hazardous ingredients, or ingredients
with national workplace exposure limits.
SECTION 4: FIRST AID MEASURES
4.1. Description of first aid measures
61/
SDS No. 11023
RINGFREE*
Inhalation
Move the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Get medical attention if any discomfort
continues.
Ingestion
Do not induce vomiting. Immediately give a couple of glasses of water or milk, provided the victim is fully conscious. Get medical attention
if any discomfort continues.
Skin contact
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if symptoms occur after
washing.
Eye contact
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
4.2. Most important symptoms and effects, both acute and delayed
General information
The severity of the symptoms described will vary dependant of the concentration and the length of exposure. If adverse symptoms develop
as described the casualty should be transferred to hospital as soon as possible. For further information, please refer to section 11.
4.3. Indication of any immediate medical attention and special treatment needed
Treat Symptomatically.
SECTION 5: FIREFIGHTING MEASURES
5.1. Extinguishing media
Extinguishing media
Water spray, foam, dry powder or carbon dioxide.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products
Fire or high temperatures create: Vapours/gases/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).
Specific hazards
In case of spills, beware of slippery floors and surfaces.
5.3. Advice for firefighters
Special Fire Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
Protective equipment for fire-fighters
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective clothing as described in Section 8 of this safety data sheet.
6.2. Environmental precautions
Do not allow to enter drains, sewers or watercourses.
6.3. Methods and material for containment and cleaning up
Stop leak if possible without risk. Dike far ahead of larger spills for later disposal. Absorb spillage with suitable absorbent material. Shovel
into dry containers. Cover and move the containers. Flush the area with water. In case of spills, beware of slippery floors and surfaces.
6.4. Reference to other sections
For waste disposal, see section 13.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for safe handling
Avoid spilling, skin and eye contact. Avoid inhalation of vapours and spray mists. In case of spills, beware of slippery floors and surfaces.
Avoid contact with: Strong oxidising substances. Good personal hygiene is necessary. Wash hands and contaminated areas with water
and soap before leaving the work site. Remove contaminated clothing. Do not eat, drink or smoke when using the product.
7.2. Conditions for safe storage, including any incompatibilities
Store in tightly closed original container in a dry, cool and well-ventilated place.
62/
SDS No. 11023
RINGFREE*
Storage Class
Chemical storage.
7.3. Specific end use(s)
The identified uses for this product are detailed in Section 1.2.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Ingredient Comments
No exposure limits noted for ingredient(s).
No biological limit allocated.
8.2. Exposure controls
Protective equipment
Process conditions
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard present and
the risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical hazards associated
with this product. Where this product is used in a mixture with other products or fluids, additional hazards may be created and as such
further assessment of risk may be required. The risk of exposure and need of respiratory protection will vary from workplace to workplace
and should be assessed by the user in each situation.
Engineering measures
Provide adequate general and local exhaust ventilation.
Respiratory equipment
No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air
contamination exists. Chemical respirator with organic vapour cartridge.
Hand protection
For prolonged or repeated skin contact use suitable protective gloves. Rubber gloves are recommended.
Eye protection
Wear approved chemical safety goggles where eye exposure is reasonably probable.
Other Protection
Wear appropriate clothing to prevent any possibility of skin contact. Provide eyewash station.
Hygiene measures
Wash hands at the end of each work shift and before eating, smoking and using the toilet. Wash hands after handling. Promptly remove
any clothing that becomes wet or contaminated.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance Liquid
Colour Clear Colourless to Light (or pale) Yellow
Odour Slight odour.
Solubility Completely soluble in water
Relative density 1.3 s.g @ 25°C
Bulk Density 10.8 lb/gal
pH-Value, Conc. Solution 7-9
Viscosity 100-400 cP @ 77°F
9.2. Other information
Not relevant
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
63/
SDS No. 11023
RINGFREE*
There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stable under normal temperature conditions and recommended use.
10.3. Possibility of hazardous reactions
Not known.
10.4. Conditions to avoid
Not known.
10.5. Incompatible materials
Materials To Avoid
Avoid contact with: Strong oxidising substances.
10.6. Hazardous decomposition products
Fire or high temperatures create: Vapours/gases/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).
SECTION 11: TOXICOLOGICAL INFORMATION
11.1. Information on toxicological effects
Acute toxicity:
Acute Toxicity (Oral LD50)
> 2000 mg/kg Rat
Aspiration hazard:
Not anticipated to present an aspiration hazard based on chemical structure.
Inhalation
Gas or vapour in high concentrations may irritate respiratory system.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged and frequent contact may cause redness and irritation.
Eye contact
Spray and vapour in the eyes may cause irritation and smarting.
Route of entry
No route of entry noted.
Target Organs
No specific target organs noted
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity
Contact M-I SWACO's QHSE Department for ecological information at [e-mail].
12.1. Toxicity
Acute Toxicity - Fish
LC50 96 hours > 100 mg/l Brachydanio rerio (Zebra Fish)
EC 50, 48 Hrs, Daphnia, mg/l >100
12.2. Persistence and degradability
Degradability
The product is not readily biodegradable.
12.3. Bioaccumulative potential
64/
SDS No. 11023
RINGFREE*
Bioaccumulative potential
The product does not contain any substances expected to be bioaccumulating.
12.4. Mobility in soil
Mobility:
The product is soluble in water.
12.5. Results of PBT and vPvB assessment
Not Classified as PBT/vPvB by current EU criteria.
12.6. Other adverse effects
None known.
SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Recover and reclaim or recycle, if practical. Dispose of waste and residues in accordance with local authority requirements.
Waste Class
The definitive European Waste code for this product will depend upon the final use that is made of this material. EWC-code: 07 01 99.
SECTION 14: TRANSPORT INFORMATION
General The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,
ADR/RID). and (ADG).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
Not applicable.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally Hazardous Substance/Marine Pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not applicable. Please contact [e-mail] for info regarding transport in Bulk.
SECTION 15: REGULATORY INFORMATION
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Uk Regulatory References
Chemicals (Hazard Information & Packaging) Regulations. Control of Substances Hazardous to Health Regulations 2002 (as amended)
Workplace Exposure Limits EH40.
EU Legislation
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration,
Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive
1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive
76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.
65/
SDS No. 11023
RINGFREE*
Water hazard classification
WGK 1
Australian Standard for the Uniform Scheduling of Drugs and Poisons
No Poisons Schedule number allocated.
Australian Regulations
National Code of Practice for the Preparation of Material Safety Data Sheets 2nd Edition [NOHSC: 2011 (2003)]. National Occupational
Health and Safety Commission’s Approved Criteria for Classifying Hazardous Substances [NOHSC:1008 (2004) 3rd Edition]. National
Occupational Health and Safety Commission’s Exposure Standards for Atmospheric Contaminants in the occupational Environment
[NOHSC:1003 (1995)]. Safe Work Australia. Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP). ADG Code – Australian
Dangerous Goods Code.
15.2. Chemical Safety Assessment
International Chemical Inventories
Contact [e-mail] for REACH information. Complies with the following national/regional chemical inventory requirements:
Australia (AICS), Canada (DSL / NDSL), China (IECSC), Europe (EINECS / ELINCS), Japan (METI / ENCS), Korea (TCCL / ECL), New
Zealand (NZIoC), Phillipines (PICCS), United States (TSCA).
SECTION 16: OTHER INFORMATION
Abbreviations and acronyms used in the safety data sheet
*a mark of M-I L.L.C.
General information
HMIS Health -1 HMIS Flammability - 1 HMIS Physical Hazard - 0 J - Splash Goggles, Gloves, Synthetic Apron, Dust and Vapour
Respirator.
Information Sources
Product information provided by the commercial vendor(s). Material Safety Data Sheet, Misc. manufacturers. LOLI. European Chemicals
Bureau - ESIS (European Chemical Substances Information).
Revision Comments
Updated according to REACH Annex II.
Issued By Sandra McWilliam
Revision Date 27-06-2013
Revision 3
Supersedes date 03-11-2009
SDS No.11023
Safety Data Sheet Status Approved.
28-06-2013
Signature Sandra McWilliam
Signature 2 Sarah Malone
Risk Phrases In Full
Not classified.NC
Disclaimer
MSDS furnished independent of product sale. While every effort has been made to accurately describe this product, some of the data are obtained from
sources beyond our direct supervision. We cannot make any assertions as to its reliability or completeness; therefore, user may rely only at user's risk.
We have made no effort to censor or conceal deleterious aspects of this product. Since we cannot anticipate or control the conditions under which this
information and product may be used, we make no guarantee that the precautions we have suggested will be adequate for all individuals and/or
situations. It is the obligation of each user of this product to comply with the requirements of all applicable laws regarding use and disposal of this
product. Additional information will be furnished upon request to assist the user; however, no warranty, either expressed or implied, nor liability of any
nature with respect to this product or to the data herein is made or incurred hereunder.
66/
Safety Data Sheet
SODA ASH
Safety data sheet number MI11693
Version 5
Revision date 12/Feb/2015
Supercedes date 21/Mar/2013
1. Identification of the substance/preparation and of the Company/undertaking
1.1 Product identifier
Product name SODA ASH
Product code MI11693
Synonyms SODIUM CARBONATE
1.2 Relevant identified uses of the substance or mixture and uses advised against
Recommended use pH modifier
Uses advised against Consumer use
1.3 Details of the supplier of the safety data sheet
1.4 Emergency Telephone Number
Emergency telephone - (24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe +44
(0) 1235 239 670, Middle East and Africa [phone], New Zealand [phone], USA 001 281 561 1600
2. Hazards identification
2.1 Classification of the substance or mixture
Regulation (EC) No. 1272/2008
Health hazards
Serious eye damage/eye irritation Category 2
Environmental hazards Not classified
________________________________________________________________________________________
Physical Hazards Not classified
2.2 Label Elements
Supplier identification
M-I Drilling Fluids UK Limited
C/O Schlumberger
Enterprise Drive
Westhill Industrial Estate
Westhill, AB32 6TQ
Scotland UK
[phone]
Page 1 / 11
[e-mail]
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
Signal word
WARNING
Hazard statements
H319 - Causes serious eye irritation
Precautionary Statements - EU (§28, 1272/2008)
P264 - Wash face, hands and any exposed skin thoroughly after handling
P280 - Wear protective gloves/ protective clothing/ eye protection/ face protection
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing
P337 + P313 - If eye irritation persists: Get medical advice/ attention
P501 - Dispose of contents/container in accordance with local regulations.

Classification according to EU Directives 67/548/EEC or 1999/45/EC
Indication of danger
Xi - Irritant
R-code(s)
R36
Contains
Sodium carbonate
For the full text of the R-phrases and H-Statements mentioned in this Section, see Section 16.
2.3 Other data
3. Composition/information on ingredients
3.1 Substances
Component EC-No.CAS-No Weight % -
range
Classification
(67/548)
Classification (Reg.
1272/2008)
REACH
registration
number
Sodium carbonate
________________________________________________________________________________________
207-838-8 497-19-8 100 Xi; R36 Eye Irrit. 2 (H319)No data available
Page 2 / 11
3.2 Mixtures
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
Not Applicable
4. First aid measures
4.1 First Aid
Inhalation If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation
develops or if breathing becomes difficult.
Ingestion Rinse mouth. Do not induce vomiting without medical advice. Never give anything by mouth
to an unconscious person. Seek medical attention if irritation occurs.
Skin contact Wash off immediately with soap and plenty of water removing all contaminated clothes and
shoes. Get medical attention if irritation persists.
Eye contact Promptly wash eyes with lots of water while lifting eye lids. Remove contact lenses.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
4.2 Most important symptoms and effects, both acute and delayed
General advice The severity of the symptoms described will vary dependant of the concentration and the
length of exposure. If adverse symptoms develop, the casualty should be transferred to
hospital as soon as possible.
Main symptoms
Inhalation Please see Section 11. Toxicological Information for further information.
Ingestion Please see Section 11. Toxicological Information for further information.
Skin contact Please see Section 11. Toxicological Information for further information.
Eye contact Please see Section 11. Toxicological Information for further information.
4.3 Indication of any immediate medical attention and special treatment needed
________________________________________________________________________________________
Notes to physician Treat symptomatically.
5. Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Water Fog, Alcohol Foam, CO2, Dry Chemical.
Extinguishing media which shall not be used for safety reasons
None known.
Page 3 / 11
5.2 Special hazards arising from the substance or mixture
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
Unusual fire and explosion hazards
None known.
Hazardous combustion products
Fire or high temperatures create:, Carbon oxides (COx), Sodium oxides.
5.3 Advice for firefighters
Special protective equipment for fire-fighters
As in any fire, wear self-contained breathing apparatus and full protective gear.
Special Fire-Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. See also section 8.
6.2 Environmental precautions
The product should not be allowed to enter drains, water courses or the soil.
Environmental exposure controls
Avoid release to the environment. Local authorities should be advised if significant spillages cannot be contained.
6.3 Methods and materials for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so. Cover powder spill with plastic sheet or tarp to minimize spreading and keep
powder dry.
Methods for cleaning up
Sweep up and shovel into suitable containers for disposal. After cleaning, flush away traces with water.
6.4 Reference to other sections
See section 13 for more information.
________________________________________________________________________________________
7. Handling and storage
7.1 Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes. Avoid dust formation.
Hygiene measures
Use good work and personal hygiene practices to avoid exposure. When using do not smoke, eat or drink. Wash hands before
eating, drinking or smoking. Remove contaminated clothing.
Page 4 / 11
7.2 Conditions for safe storage, including any incompatibilities
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
Technical measures/precautions Ensure adequate ventilation.
Storage Keep containers tightly closed in a dry, cool and well-ventilated place. Avoid contact with:
Oxidizing agents Acids Protect from moisture
Storage class Chemical storage.
Packaging material Use specially constructed containers only
7.3 Specific end uses
See also Section 1.2.
8. Exposure controls/personal protection
8.1 Control parameters
Exposure limits The product does not contain any hazardous materials with occupational exposure limits
established.
Component EU OEL - Third List Austria Australia Denmark
Sodium carbonate Not determined Not determined Not determined Not determined
Component Finland France Germany Hungary
Sodium carbonate Not determined Not determined Not determined Not determined
Component New Zealand Italy Netherlands Norway
Sodium carbonate Not Determined Not determined Not determined Not determined
Component Poland Portugal Romania Russia
Sodium carbonate Not determined Not determined Not determined Not determined
Component Spain Switzerland Turkey UK
Sodium carbonate Not determined Not determined Not determined Not determined
________________________________________________________________________________________
Page 5 / 11
8.2 Exposure controls
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard
present and the risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical
hazards associated with this product. Where this product is used in a mixture with other products or fluids, additional hazards may
be created and as such further assessment of risk may be required. The risk of exposure and need of respiratory protection will
vary from workplace to workplace and should be assessed by the user in each situation.
Engineering measures to
reduce exposure
Ensure adequate ventilation. Mechanical ventilation or local exhaust ventilation is required.
Personal protective equipment
Eye protection It is good practice to wear goggles when handling any chemical. Tightly fitting safety
goggles.
Hand protection Repeated or prolonged contact:, Use protective gloves made of:, Neoprene, Rubber,
Frequent change is advisable.
Respiratory protection No personal respiratory protective equipment normally required, In case of insufficient
ventilation wear suitable respiratory equipment, Half mask with a particle filter P2 (BS EN
143), At work in confined or poorly ventilated spaces, respiratory protection with air supply
must be used.
Skin and body protection Wear suitable protective clothing, Eye wash and emergency shower must be available at
the work place.
Hygiene measures Wash hands before eating, drinking or smoking, Remove and wash contaminated clothing
before re-use.
9. Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance Powder Dust
Odour Odourless
Colour White
Odor threshold Not applicable
Physical state Solid
Property Values Remarks
pH No information available
pH @ dilution > 12 @ 10 g/l
Melting/freezing point 851 °C / 1564 °F
Boiling point/range No information available
Flash Point No information available
Evaporation rate No information available
Flammability (solid, gas)Not Applicable
Flammability Limits in Air
________________________________________________________________________________________
Upper flammability Limit Not applicable
Lower flammability limit Not applicable
Vapor pressure
Page 6 / 11
No information available
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
Explosive properties Not Applicable
Oxidizing properties None known.
9.2 Other information
Pour point No information available
Molecular weight No information available
VOC content(%)None
Density VALUE No information available
10. Stability and reactivity
10.1 Reactivity
Reacts violently with acids.
10.2 Chemical stability
Stable under normal temperature conditions and recommended use.
10.3 Possibility of Hazardous Reactions
Hazardous polymerization
Hazardous polymerisation does not occur.
10.4 Conditions to avoid
Avoid dust formation. Protect from moisture.
10.5 Incompatible materials
Oxidizing agents. Acids.
10.6 Hazardous decomposition products
See also section 5.2.
11. Toxicological information
11.1 Information on toxicological effects
Acute toxicity
Vapor density No information available
Specific gravity No information available
Bulk density No information available
Relative density 2.53 sg @ 20°C.
Water solubility Soluble in water
Solubility in other solvents No information available
Autoignition temperature No information available
________________________________________________________________________________________
Decomposition temperature > 400°C (752°F)
Kinematic viscosity No information available
Viscosity, dynamic No information available
Log Pow
Page 7 / 11
Not determined
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
Inhalation Inhalation of dust may cause shortness of breath, tightness of the chest, a sore throat and
cough.
Eye contact Causes serious eye irritation.
Skin contact Prolonged contact may cause redness and irritation.
Ingestion Ingestion may cause stomach discomfort.
Component LD50 Oral LD50 Dermal LC50 Inhalation
Sodium carbonate = 4090 mg/kg ( Rat )No data available No data available
Sensitisation This product does not contain any components suspected to be sensitizing.
Mutagenic effects This product does not contain any known or suspected mutagens.
Carcinogenicity This product does not contain any known or suspected carcinogens.
Reproductive toxicity This product does not contain any known or suspected reproductive hazards.
Routes of exposure Eye contact.
Routes of entry No route of entry noted.
Specific target organ toxicity (single
exposure)
Not classified
Specific target organ toxicity
(repeated exposure)
Not classified.
Aspiration hazard No hazard from product as supplied.
________________________________________________________________________________________
12. Ecological information
12.1 Toxicity
The product component(s) are not classified as environmentally hazardous. However, this does not exclude the possibility that
large or frequent spills can have a harmful or damaging effect on the environment. Listed on PLONOR list of OSPAR
Toxicity to algae
See component information below.
Page 8 / 11
Toxicity to fish
See component information below.
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
Toxicity to daphnia and other aquatic invertebrates
See component information below.
Component Toxicity to fish Toxicity to algae Toxicity to daphnia and other
aquatic invertebrates
Sodium carbonate 300 mg/L LC50 (Lepomis
macrochirus) = 96 h
310 - 1220 mg/L LC50 (Pimephales
promelas) = 96 h
242 mg/L EC50 (Nitzschia) = 120 h 265 mg/L EC50 (Daphnia magna) =
48 h
12.2 Persistence and degradability
Not Applicable - Inorganic chemical.
12.3 Bioaccumulative potential
Not Applicable - Inorganic chemical.
12.4 Mobility in soil
Mobility
Soluble in water.
12.5 Results of PBT and vPvB assessment
Not classified as PBT/vPvB by current EU criteria.
12.6 Other adverse effects.
None known.
________________________________________________________________________________________
13. Disposal considerations
13.1 Waste treatment methods
Waste from residues / unused
products
Dispose of in accordance with local regulations.
Page 9 / 11
Contaminated packaging Empty containers should be transported/delivered using a registered waste carrier for local
recycling or waste disposal.
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
EWC waste disposal No.According to the European Waste Catalogue, Waste Codes are not product specific, but
application specific. Waste codes should be assigned by the user based on the application
for which the product was used. The following Waste Codes are only suggestions: EWC
waste disposal No: 06 02 05 Waste Code: 7091
14. Transport information
The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,ADR/RID/ADG).
14.1 UN number
Not regulated
14.2 Proper shipping name
Not regulated
14.3. Hazard class(es)
ADR/RID/ADN Hazard class Not regulated
IMDG Hazard class Not regulated
ICAO Hazard class/division Not regulated
14.4 Packing group
ADR/RID/ADN Packing Group Not regulated
IMDG Packing group Not regulated
ICAO Packing group Not regulated
14.5 Environmental hazard
No
14.6 Special precautions
Not Applicable
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Please contact [e-mail] for info regarding transport in Bulk.
15. Regulatory information
________________________________________________________________________________________
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Page 10 / 11
Commission Regulation (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European
Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals
Agency, amending Directive 1999/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC)
No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and
2000/21/EC, including amendments.
________________________________________________________________________________________
SODA ASH
Safety data sheet number MI11693
Revision date 12/Feb/2015
This safety data sheet complies with the requirements of Regulation (EC) No. 1272/2008.
International inventories
USA, Toxic Substances Control Act inventory (TSCA)Complies
European Union - EINECS and ELINCS Complies
Canada, Domestic Substance List (DSL)Complies
Philippines (PICCS)Complies
Inventory - Japan - Existing and New Chemicals list Complies
China (IECSC)Complies
Australia (AICS)Complies
Korea (KECL)Complies
Inventory - New Zealand - Inventory of Chemicals (NZIoC)Complies
Contact [e-mail] for REACH information.
15.2 Chemical Safety Report
No information available
16. Other information
Prepared by Global Chemical Regulatory Compliance (GCRC) , Anne Karin (Anka) Fosse
Supercedes date 21/Mar/2013
Revision date 12/Feb/2015
Version 5
Text of R phrases mentioned in Section 3
R36 - Irritating to eyes
________________________________________________________________________________________
Full text of H-Statements referred to under sections 2 and 3
H319 - Causes serious eye irritation
Disclaimer
The information contained herein is considered in good faith as reliable of the date issued and is based upon on
measurements, tests or data derived from supplier’s own study or furnished by others. In providing this SDS
information, Supplier makes no express or implied warranties as to the information or product; merchantability or fitness
of purpose; any express or implied warranty; or non-infringement of intellectual property rights; and supplier assumes no
responsibility for any direct, special or consequential damages, results obtained, or the activities of others. To the
maximum extent permitted by law, supplier’s warranty obligations and buyer’s sole remedies are as stated in separate
agreement between the parties.
Page 11 / 11