NCG210027_No Exposure NCGNE1243 Denied Letter_20180201

Energy, Mineral
and Land Resources
ENVIRONMENTAL OUALITV
January 29, 2018
Dimension Wood Products, Incorporated
Attention: Mr. David Reinhardt
2884 Kelly Boulevard
Claremont, North Carolina 28610
Subject: No Exposure Request — Dimension Wood Products, Incorporated
NCGNE 1243
Catawba County, North Carolina
Dear Mr. Reinhardt:
ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
WILLIAM E. TOBY VINSON JR.
interim Director
Enclosed please find a copy of the report from January 25, 2017 site inspection. No exposure cannot be granted
at this time. The report should be self-explanatory, however, should you have any questions concerning this, please
do not hesitate to contact James Moore at [phone] or at [e-mail].
Sincerely,
Zahid S. Khan, CPM, CPESC, CPSWQ
Regional Engineer
Land Quality Section
Enclosure: Inspection Report
cc: Stormwater Permitting Program, Raleigh Central Office- NCGNE1243
State of Nonh Carolina I Environmental Quality [Energy, Mineral and Land Resources
Mooresville Regional Office 1 610 East Center Ave Ste 301 1 Mooresville, NC 28115

Compliance Inspection Report
Permit: NCGNE1243 Effective: Expiration: Owner: Dimension Wood Products Inc
SOC: Effective: Expiration: Facility: Dimension Wood Products Incorporated
2884 Kelly Blvd
County: Catawba
Region: Mooresville Claremont NC 28610
Contact Person: David W Reinhardt
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 01/2512018
Primary Inspector: Angela Y Lee
Secondary Inspector(s):
Title: President
Certification:
Phone: [phone]
Phone:
Entry Time: 12:OOPM Exit Time: 12:30PM
Phone: [phone]
James D Moore Phone:
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Stormwater Discharge, No Exposure Certificate
Facility Status: E Compliant ❑ Not Compliant
Question Areas:
0 Miscellaneous Questions
(See attachment summary)
Page: 1

Permit: NCGNE1243 Owner - Facility: Dimension Wood Products Inc
Inspection Date: 01/25/2018 Inspection Type: Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
This inspection wasconducted per a No Exposure request. Based on the site inspection, No Exposure cannot be granted at
this time. The top of the waste container will need to be covered before the No Exposure Certification can be granted.
Page: 2

permit: NCGNE1243 Owner - Facility: Dimension Wood Products Inc
Inspection Date: 01/25/2018 Inspection Type: Compliance Evaluation Reason for Visit: Routine
Page: 3