NCGNE1243_No Exposure Denial_20180129

Energy, Mineral
and Land Resources
ENVIRONMENTAL QUALITY
January 29, 2018
Dimension Wood Products, Incorporated
Attention: Mr. David Reinhardt
2884 Kelly Boulevard
Claremont, North Carolina 28610
Subject: No Exposure Request— Dimension Wood Products, Incorporated
NCGNE 1243
Catawba County, North Carolina
Dear Mr. Reinhardt:
J-�� -mmm
ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
WILLIAM E. TOBY VINSON JR.
Interim Director
FFB Oro' 20, i
DENR-LAND QUALITY
STORMWATER PERMITTING
Enclosed please find a copy of the report from January 25, 2017 site inspection. No exposure cannot be granted
at this time. The report should be self-explanatory, however, should you have any questions concerning this, please
do not hesitate to contact James Moore at [phone] or [e-mail].
Sincerely,
Zahid S. Khan, CPM, CPESC, CPSWQ
Regional Engineer
Land Quality Section
Enclosure: Inspection Report
cc Storniwater Permitting-Program;=Raleigh Central -Office- NCGNE1243
State of North Carolina I Environmental Quality I Energy, Mineral and Land Resources
Mooresville Regional Office 1 610 East Center Ave Ste 301 1 Mooresville, NC 28115

Permit: NCGNE1243 Effective:
SOC: Effective:
County: Catawba
Region: Mooresville
Contact Person: David W Reinhardt
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Compliance Inspection Report
Expiration: Owner: Dimension Wood Products Inc
Expiration: Facility: Dimension Wood Products Incorporated
2884 Kelly Blvd
Claremont NC 28610
Title: President Phone: [phone]
Certification:
Phone:
Inspection Date: 01/25/2018 Entry Time: 12.00PM Exit Time: 12.30PM
Primary Inspector: Angela Y Lee Phone: [phone]
Secondary Inspector(s):
James D Moore Phone:
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Stormwater Discharge, No Exposure Certificate
Facility Status: Compliant Not Compliant
Question Areas:
Miscellaneous Questions
(See attachment summary)
Page- 1

Permit: NCGNE1243 Owner - Facility: Dimension Wood Products Inc
Inspection Date: 01125/2018 Inspection Type: Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
This Inspection was conducted per a No Exposure request Based on the site inspection, No Exposure cannot be granted at
this time The top of the waste container will need to be covered before the No Exposure Certification can be granted
Page- 2

Permit NCGNE1243 Owner - Facility: Dimension Wood Products Inc
Inspection Date: 01/25/2018 Inspection Type: Compliance Evaluation Reason for Visit: Routine
Page- 3