20090017 Ver 1_Application_20090102

Office Use Only: Form Version March 08
USACE Action ID No. DWQ No. 0 9- 0 0 17
(it any particular item is not applicable to this project, please enter "Not Applicable" or "N/A".)
1. Processing SPAIP
Check all of the approval(s) requested for this project:
Section 404 Permit ? Riparian or Watershed Buffer Rules
Section 10 Permit ? Isolated Wetland Permit from DWQ
401 Water Quality Certification ? Express 401 Water Quality Certification
2. Nationwide, Regional or General Permit Number(s) Requested: NWP 14
3. If this notification is solely a courtesy copy because written approval for the 401 Certification
is not required, check here: K
4. If payment into the North Carolina Ecosystem Enhancement Program (NCEEP) is proposed
for mitigation of impacts, attach the acceptance letter from NCEEP, complete section VIII,
and check here: ?
5. If your project is located in any of North Carolina's twenty coastal counties (listed on page
4), and the project is within a North Carolina Division of Coastal Management Area of
Environmental Concern (see the top of page 2 for further details), check here: ?
II. Applicant Information
G ?? T
?
1. Owner/Applicant Information ? : . D
Name: Wayne M. D. Press 2009
Mailing Address: PO Box 726
Linville_ NC 2R64( ?cNR ??A._.,:.waTER
Telephone Number: Fax Number:
E-mail Address:
2. Agent/Consultant Information (A signed and dated copy of the Agent Authorization letter
must be attached if the Agent has signatory authority for the owner/applicant.)
Name:
Company Affiliation:
Mailing Address:
Telephone Number:
E-mail Address:
Fax Number:
Page 5 of 13
III. Project Information
Attach a vicinity map clearly showing the location of the property with respect to local
landmarks such as towns, rivers, and roads. Also provide a detailed site plan showing property
boundaries and development plans in relation to surrounding properties. Both the vicinity map
and site plan must include a scale and north arrow. The specific footprints of all buildings,
impervious surfaces, or other facilities must be included. If possible, the maps and plans should
include the appropriate USGS Topographic Quad Map and NRCS Soil Survey with the property
boundaries outlined. Plan drawings, or other maps may be included at the applicant's discretion,
so long as the property is clearly defined. For administrative and distribution purposes, the
USACE requires information to be submitted on sheets no larger than 11 by 17-inch format;
however, DWQ may accept paperwork of any size. DWQ prefers full-size construction
drawings rather than a sequential sheet version of the full-size plans. If full-size plans are
reduced to a small scale such that the final version is illegible, the applicant will be informed that
the project has been placed on hold until decipherable maps are provided.
1. Name of project: Wayne M. D. Press & Toby Ann Press
2. T.I.P. Project Number or State Project Number (NCDOT Only):
3. Property Identification Number (Tax PIN): 2943-10-1385-000&2943-01-5419-000
4. Location
County: Watauga Nearest Town: Boone
Subdivision name (include phase/lot number): N/A
Directions to site (include road numbers, landmarks, etc.): From intersection of US 421 &
NC 194 proceed north along Hwy 194 to intersection of NCSR 1333 (Castleford Road with
NC 194, bear right onto NCSR 1333 and proceed northeast until intersection with NCSR
1351 continue along NCSR 1351 (Castleford Road) to New River at Watauga/Ashe County
line. Property is located on west side of NCSR 1351 and south side of river.
5. Site coordinates (Lat/Long or decimal degrees): 36.2694 d N: 81.6219 d W
(Note - If project is linear, such as a road or utility line, attach a sheet that separately lists the
coordinates for each crossing of a distinct waterbody.)
6. Property size (acres): 71 acres
7. Name of nearest receiving body of water: New River
8. River Basin: New River
(Note - this must be one of North Carolina's seventeen designated major river basins. The
River Basin map is available at http://h2o.enr.state.nc.us/admin/mgps/.)
9. Describe the existing conditions on the site and general land use in the vicinity of the project
at the time of this application: Pasture and timber
Page 6 of 13
10. Describe the overall project in detail, including the type of equipment to be used: This
project is for the construction of a residential driveway and summer residence for single
family use. There is 1400 linear feet of road to be constructed with an existing building pad
(formerly and old home site) to be enlarged to accommodate a small log style home
overlooking the valley and New River. The drive and home site are located approximately
200 to 250 feet south of the River. The road construction involves the crossing of two
separate streams. One along the west side of NCSR 1351 and the second near the western
end of the proposed drive just before reaching the house site. Both crossing will be by the
installation of pipes. The one along NCSR 1351 requires the installation of 30 feet of
66"X51" arch pipe with headwalls. This installation will involve the temporary damming of
the creek and pumping the water around the area where the pipe is to be placed The crossing
of the small branch near the western end of the drive requires installing 65 feet of 48" pipe
with headwalls to support and reduce the amount of fill. This will be done by beginning at
the outlet end of the pipe and ditching upstream along a small bend in the branch avoiding
disturbing the stream flow. Once the pipe has been placed a short section of channel will be
opened, diverting the stream into the pipe. The headwalls can then be constructed and the fill
placed in the original steam channel. The equipment expected to be used will include a tract-
hoe and bulldozer. A temporary point of access is a stream ford below an old barn for farm
equipment. This will be used until the pipe beside of NCSR 1351 is installed There are to be
several rock filter basin installed along the length of the drive as well as silt fence to trap and
control erosion during construction and maintained until the site is stabilized with vegetation
11. Explain the purpose of the proposed work: The propose of the work is for a single family
residence and drive.
IV. Prior Project History
If jurisdictional determinations and/or permits have been requested and/or obtained for this
project (including all prior phases of the same subdivision) in the past, please explain. Include
the USACE Action ID Number, DWQ Project Number, application date, and date permits and
certifications were issued or withdrawn. Provide photocopies of previously issued permits,
certifications or other useful information. Describe previously approved wetland, stream and
buffer impacts, along with associated mitigation (where applicable). If this is a NCDOT project,
list and describe permits issued for prior segments of the same T.I.P. project, along with
construction schedules.
None
V. Future Project Plans
Are any future permit requests anticipated for this project? If so, describe the anticipated work,
and provide justification for the exclusion of this work from the current application.
Page 7 of 13
VI. Proposed Impacts to Waters of the United States/Waters of the State
It is the applicant's (or agent's) responsibility to determine, delineate and map all impacts to
wetlands, open water, and stream channels associated with the project. Each impact must be
listed separately in the tables below (e.g., culvert installation should be listed separately from
riprap dissipater pads). Be sure to indicate if an impact is temporary. All proposed impacts,
permanent and temporary, must be listed, and must be labeled and clearly identifiable on an
accompanying site plan. All wetlands and waters, and all streams (intermittent and perennial)
should be shown on a delineation map, whether or not impacts are proposed to these systems.
Wetland and stream evaluation and delineation forms should be included as appropriate.
Photographs may be included at the applicant's discretion. If this proposed impact is strictly for
wetland or stream mitigation, list and describe the impact in Section VIII below. If additional
space is needed for listing or description, please attach a separate sheet.
I . Provide a written description of the proposed impacts: Stream Crossing I is the
installation of 65 feet of 48" CMP with headwalls and 14 feet of fill material. This will
straighten 75 feet of existing stream bed. The two headwalls will be no more that 5 feet high
at the highest. Stream Crossing 2 is the installation of 30 feet of 66"X51" arch pipe in the
stream along side of NCSR 1351 with headwalls. These headwalls will reach the full height
of the fill which is approximately 7.5 feet.
2. Individually list wetland impacts. Types of impacts include, but are not limited to
mechanized clearing, grading, fill, excavation, flooding, ditching/drainage, etc. For dams,
se aratel list impacts due to both structure and flooding.
Wetland Impact
Site Number

(indicate on map)
Type of Impact Type of Wetland
(e.g., forested, marsh,

herbaceous, bog, etc.) Located within
100-year

Floodplain (es/no) Distance to
Nearest
Stream
(linear feet) Area of
Impact
(acres)

Total Wetland Impact (acres)
3. List the total acreage (estimated) of all existing wetlands on the property: 4y2- AC_
4. Individually list all intermittent and perennial stream impacts. Be sure to identify temporary
impacts. Stream impacts include, but are not limited to placement of fill or culverts, dam
construction, flooding, relocation, stabilization activities (e.g., cement walls, rip-rap, crib
walls, gabions, etc.), excavation, ditching/straightening, etc. If stream relocation is proposed,
plans and profiles showing the linear footprint for both the original and relocated streams
must be included. To calculate acreage, multiply length X width, then divide by 43,560.
Page 8 of 13
Stream Impact
Number
indicate on ma
( )
Stream Name
Type of Impact
Perennial or
Intermittent? Average
Stream Width

Before Impact Impact
Length

(linear feet) Area of
Impact

(acres)
One Unnamed trib. Pipe Perennial 1.0 ft 75 ft. 0.007
Two Unnamed trib. Pipe Perennial 3.0 ft. 30 ft. 0.112

Total Stream Impact (by length and acreage) 105 ft. 0.12
5. Individually list all open water impacts (including lakes, ponds, estuaries, sounds, Atlantic
Ocean and any other water of the U.S.). Open water impacts include, but are not limited to
fill, excavation, dredainQ, flooding- drainage- hulkhearlc Ptr
Open Water Impact
Site Number
(indicate on ma) Name of Waterbody
(if applicable)
Type of Impact Type of Waterbody
(lake, pond, estuary, sound, bay,
ocean, etc.) Area of
Impact
(acres)

Total Open Water Impact (acres)
6. List the cumulative impact to all Waters of the I1_S_ resulting from the ,,,.,;P..t•
Stream Impact (acres): 0.12
Wetland Impact (acres):
O en Water Impact (acres):
Total Impact to Waters of the U.S. (acres) 0.12
Total Stream Impact (linear feet): 105 ft.
7. Isolated Waters
Do any isolated waters exist on the property? ? Yes JE No
Describe all impacts to isolated waters, and include the type of water (wetland or stream) and
the size of the proposed impact (acres or linear feet). Please note that this section only
applies to waters that have specifically been determined to be isolated by the USACE.
8. Pond Creation
If construction of a pond is proposed, associated wetland and stream impacts should be
included above in the wetland and stream impact sections. Also, the proposed pond should
be described here and illustrated on any maps included with this application.
Pond to be created in (check all that apply): ? uplands ? stream ? wetlands
Describe the method of construction (e.g., dam/embankment, excavation, installation of
draw-down valve or spillway, etc.):
Page 9 of 13
Proposed use or purpose of pond (e.g., livestock watering, irrigation, aesthetic, trout pond,
local stormwater requirement, etc.):
Current land use in the vicinity of the pond:
Size of watershed draining to pond: Expected pond surface area:
VII. Impact Justification (Avoidance and Minimization)
Specifically describe measures taken to avoid the proposed impacts. It may be useful to provide
information related to site constraints such as topography, building ordinances, accessibility, and
financial viability of the project. The applicant may attach drawings of alternative, lower-impact
site layouts, and explain why these design options were not feasible. Also discuss how impacts
were minimized once the desired site plan was developed. If applicable, discuss construction
techniques to be followed during construction to reduce impacts. Bridges were looked at but due
to construction cost and location of NCSR 1351 not considered feasible Placement of pipes to
carry the streams became the only option. Construction of headwalls provided a means of
reducing the total length of impact to the two streams by containing the fill material This
reduced the total impact by 50 linear feet in the two streams. The bridge option for the Stream
Crossing 1 would have required a span of 60 feet (min.) at a height of 14 feet with en ineer
headwalls to support the fill. The cost of this alone would have equaled almost half of the total
budget. The construction of a bridge at Stream Crossing 2 would require construction of a
headwall in the DOT right of way that would not have been approved by DOT This was
discussed with DOT personal at the local office. The only option to reach the building site is by
installing the pipes.
VIII. Mitigation
DWQ - In accordance with 15A NCAC 2H .0500, mitigation may be required by the NC
Division of Water Quality for projects involving greater than or equal to one acre of impacts to
freshwater wetlands or greater than or equal to 150 linear feet of total impacts to perennial
streams.
USACE - In accordance with the Final Notice of Issuance and Modification of Nationwide
Permits, published in the Federal Register on January 15, 2002, mitigation will be required when
necessary to ensure that adverse effects to the aquatic environment are minimal. Factors
including size and type of proposed impact and function and relative value of the impacted
aquatic resource will be considered in determining acceptability of appropriate and practicable
mitigation as proposed. Examples of mitigation that may be appropriate and practicable include,
but are not limited to: reducing the size of the project; establishing and maintaining wetland
and/or upland vegetated buffers to protect open waters such as streams; and replacing losses of
aquatic resource functions and values by creating, restoring, enhancing, or preserving similar
functions and values, preferable in the same watershed.
If mitigation is required for this project, a copy of the mitigation plan must be attached in order
for USACE or DWQ to consider the application complete for processing. Any application
lacking a required mitigation plan or NCEEP concurrence shall be placed on hold as incomplete.
An applicant may also choose to review the current guidelines for stream restoration in DWQ's
Page 10 of 13
Draft Technical Guide for Stream Work in North Carolina, available at
http://h2o.enr.state.nc.us/ncwetlands/strmgide.html.
1. Provide a brief description of the proposed mitigation plan. The description should provide
as much information as possible, including, but not limited to: site location (attach directions
and/or map, if offsite), affected stream and river basin, type and amount (acreage/linear feet)
of mitigation proposed (restoration, enhancement, creation, or preservation), a plan view,
preservation mechanism (e.g., deed restrictions, conservation easement, etc.), and a
description of the current site conditions and proposed method of construction. Please attach
a separate sheet if more space is needed.
2. Mitigation may also be made by payment into the North Carolina Ecosystem Enhancement
Program (NCEEP). Please note it is the applicant's responsibility to contact the NCEEP at
[phone] to determine availability, and written approval from the NCEEP indicating
that they are will to accept payment for the mitigation must be attached to this form. For
additional information regarding the application process for the NCEEP, check the NCEEP
website at lam://h2o.enr.state.nc.us/mU/index.htm. If use of the NCEEP is proposed, please
check the appropriate box on page three and provide the following information:
Amount of stream mitigation requested (linear feet):
Amount of buffer mitigation requested (square feet):
Amount of Riparian wetland mitigation requested (acres):
Amount of Non-riparian wetland mitigation requested (acres):
Amount of Coastal wetland mitigation requested (acres):
IX.
X.
Environmental Documentation (required by DWQ)
Does the project involve an expenditure of public (federal/state/local) funds or the use of
public (federal/state) land? Yes ? No
2. If yes, does the project require preparation of an environmental document pursuant to the
requirements of the National or North Carolina Environmental Policy Act (NEPA/SEPA)?
Note: If you are not sure whether a NEPA/SEPA document is required, call the SEPA
coordinator at [phone] to review current thresholds for environmental documentation.
Yes ? No ?
3. If yes, has the document review been finalized by the State Clearinghouse? If so, please
attach a copy of the NEPA or SEPA final approval letter. Yes ? No ?
Proposed Impacts on Riparian and Watershed Buffers (required by DWQ)
Page I 1 of 13
b
It is the applicant's (or agent's) responsibility to determine, delineate and map all impacts to
required state and local buffers associated with the project. The applicant must also provide
justification for these impacts in Section VII above. All proposed impacts must be listed herein,
and must be clearly identifiable on the accompanying site plan. All buffers must be shown on a
map, whether or not impacts are proposed to the buffers. Correspondence from the DWQ
Regional Office may be included as appropriate. Photographs may also be included at the
applicant's discretion.
1. Will the project impact protected riparian buffers identified within 15A NCAC 2B .0233
(Meuse), 15A NCAC 2B .0259 (Tar-Pamlico), 15A NCAC 02B .0243 (Catawba) 15A NCAC
2B .0250 (Randleman Rules and Water Supply Buffer Requirements), or other (please
identify )? Yes ? No g
2. If "yes", identify the square feet and acreage of impact to each zone of the riparian buffers.
If buffer mitigation is required calculate the required amount of mitigation by applying the
buffer multipliers.
I Zone* I Impact I Multiplier I Required
(square feed Mitigation
1 3 (2 for Catawba)
2 1.5
Total
* Zone 1 extends out 30 feet perpendicular from the top of the near bank of channel; Zone 2 extends an
additional 20 feet from the edge of Zone 1.
3. If buffer mitigation is required, please discuss what type of mitigation is proposed (i.e.,
Donation of Property, Riparian Buffer Restoration / Enhancement, or Payment into the
Riparian Buffer Restoration Fund). Please attach all appropriate information as identified
within 15A NCAC 213.0242 or .0244, or .0260.
XI. Stormwater (required by DWQ)
Describe impervious acreage (existing and proposed) versus total acreage on the site. Discuss
stormwater controls proposed in order to protect surface waters and wetlands downstream from
the property. If percent impervious surface exceeds 20%, please provide calculations
demonstrating total proposed impervious level. Total impervious area proposed is less than 1
acre. This will include the drive and residence. The existing impervious area is in the form of an
old barn of approximately 2500 sq ft. This barn is being removed The total area of the site is 70
plus acres. This amounts to less than 2% impervious area
XII. Sewage Disposal (required by DWQ)
Clearly detail the ultimate treatment methods and disposition (non-discharge or discharge) of
wastewater generated from the proposed project, or available capacity of the subject facility.
Sewage treatment will be by individual septic tank and drain field in the vicini of the
new residence.
Page 12 of 13
It t,
XIII. Violations (required by DWQ)
Is this site in violation of DWQ Wetland Rules (15A NCAC 2H.0500) or any Buffer Rules?
Yes ? No g
Is this an after-the-fact permit application? Yes ? No
XIV. Cumulative Impacts (required by DWQ)
i
Will this project (based on past and reasonably anticipated future impacts) result in additional
development which could impact nearby downstream water quality? Yes ? No X
If yes, please submit a qualitative or quantitative cumulative impact analysis in accordance with
the most recent North Carolina Division of Water Quality policy posted on our website at
http://h2o.enr.state.nc.us/ncwetlands. If no, please provide a short narrative description: There is
no current plans for future development of this tract.
XV. Other Circumstances (Optional):
It is the applicant's responsibility to submit the application sufficiently in advance of desired
construction dates to allow processing time for these permits. However, an applicant may
choose to list constraints associated with construction or sequencing that may impose limits on
-work schedules (e.g., draw-down schedules for lakes, dates associated with Endangered and
Threatened Species, accessibility problems, or other issues outside of the applicant's control).

(A
C???:?-)/ Jo C)
Appli?ant/Aggnt's Signature Date
s signature invalid only if an authorization letter from the applicant is provided.)
Page 13 of 13