HomeMy WebLinkAbout20160490 Ver 1_Email_20170814Carpenter,Kristi
From: Shaver, Brad E CIV USARMY CESAW (US)
<Brad.E.Shaver@usace.army.mil>
Sent: Monday, August 14, 2017 12:24 PM
To: Herndon, T. Mason; Steenhuis, Joanne
Subject: RE: B-4814 Sampson County
Got it thanks nothing else needed now.
-----Original Message-----
From: Herndon, T. Mason [mailto:tmherndon@ncdot.gov]
Sent: Monday, August 14, 2017 8:55 AM
To: Shaver, Brad E CIV USARMY CESAW (US) <Brad.E.Shaver@usace.army.mil>;
Steenhuis, Joanne <joanne.steenhuis@ncdenr.gov>
Subject: [Non-DoD Source] B-4814 Sampson County
Brad,
Per our conversation this morning, the project inspector called me this morning
regarding End Bent 2 on Bridge 102 on the B-4814 project in Sampson County. The
original proposal was to leave the old vertical end bent in place and cut it off at the
proposed excavation elevation. It appears that this end bent was damage during
Hurricane Matthew and Bridge Maintenance excavated behind the end bent placed
fiberglass sheeting against the timber end bent and back filled it with 57 stone. Because
the vertical end bent is damage and 57 stone is behind it, the Division would like to
excavate the material behind (landward) of the end bent at a 1.5:1 slope and rip rap the
slope with Class II rip rap. I've spoken with Kevin Bowen and he agrees with this
proposal. Based on our conversation this is work in high ground and will not require a
permit modification so we are going to proceed as proposed. Attached are pictures of
the old end bent for your records. If you have any questions or need any additional
information, please do not hesitate to contact me.
Thanks!
Mason Herndon
Environmental Program Supervisor
Division 3
NCDOT- Division of Highways
910-341-2036 office
910-604-0050 mobile
tmherndon@ncdot.gov
5501 Barbados Blvd
Castle Hayne, NC 28429
Email correspondence to and from this address is subject to the
North Carolina Public Records Law and may be disclosed to third parties.
Email correspondence to and from this sender is subject to the N.C. Public Records Law
and may be disclosed to third parties.