NC0027286_Renewal (Application)_20160317

Town of Blowing Rock is requesting a renewal of our Waste Water Treatment Plant
permit. We have changed the PH sample from composite to grab, request was granted by
the state in November 2015.
We have had changes in personal; Scott Fogleman is now the Town Manger, Mark
Griffin (ww3 986249) is now the ORC, Marshall James Townsend (ww 2 1002559) is
full time operator, Trathen Greene operator in training. No longer with us is Scott
Hildabran Town Manger, Tom McRary ORC and Brian Banner.
RECEIVED/NCDEQ/DWR
MAR 172016
Water Quality
Permitting Section

Sludge treatment and removal 2015
Sludge is wasted from the clarifiers to
the digester where it is stored and
thickened by removing water after it
settles. Then the thick sludge is pumped
from the bottom of the digester to
Honey-Well septic truck which then
hauls the product to Lenoir Waste Water
treatment Plant (Lower Creek). Honey-
Well hauls four loads a week during the
year, each load is 2250 gallons.
Thank You
Mark Griffin ORC
fL,

FACILITY NAME AND PERMIT NUMBER: PEERMIT ACTION REQUESTED: RIVER BASIN:
l31oc� �c �nc.IC rVLC>C: Zt7_`GGA er . lvfz�r �, '—
FORM FORM
2A NPDES FORM 2A APPLICATION OVERVIEW
NPDES
APPLICATION OVERVIEW
Form 2A has been developed in a modular format and consists of a "Basic Application Information" packet and a
"Supplemental Application Information" packet. The Basic Application Information packet is divided into two
parts. All applicants must complete Parts A and C. Applicants with a design flow greater than or equal to 0.1 mgd
must also complete Part B. Some applicants must also complete the Supplemental Application Information
packet. The following items explain which parts of Form 2A you must complete.
BASIC APPLICATION INFORMATION:
A. Basic Application Information for all Applicants. All applicants must complete questions A.1 through A.8. A treatment works that
discharges effluent to surface waters of the United States must also answer questions A.9 through A.12.
B. Additional Application Information for Applicants with a Design Flow Z 0.1 mgd. All treatment works that have design flows greater
than or equal to 0.1 million gallons per day must complete questions B.1 through B.6.
C. Certification. All applicants must complete Part C(Certification).
SUPPLEMENTAL APPLICATION INFORMATION:
D. Expanded Effluent Testing Data. A treatment works that discharges effluent to surface waters of the United States and meets one or
more of the following criteria must complete Part D (Expanded Effluent Testing Data):
1. Has a design flow rate greater than or equal to 1 mgd,
2. Is required to have a pretreatment program(or has one in place),or
3. Is otherwise required by the permitting authority to provide the information.
E. Toxicity Testing Data. A treatment works that meets one or more of the following criteria must complete Part E(Toxicity Testing Data):
1. Has a design flow rate greater than or equal to 1 mgd,
2. Is required to have a pretreatment program(or has one in place),or
3. Is otherwise required by the permitting authority to submit results of toxicity testing.
F. Industrial User Discharges and RCRA/CERCLA Wastes. A treatment works that accepts process wastewater from any significant
industrial users(SIUs)or receives RCRA or CERCLA wastes must complete Part F(Industrial User Discharges
and RCRA/CERCLA Wastes). SIUs are defined as:
1. All industrial users subject to Categorical Pretreatment Standards under 40 Code of Federal Regulations(CFR)403.6 and 40 CFR
Chapter I,Subchapter N (see instructions);and
2. Any other industrial user that:
a. Discharges an average of 25,000 gallons per day or more of process wastewater to the treatment works(with certain
exclusions);or
b. Contributes a process wastestream that makes up 5 percent or more of the average dry weather hydraulic or organic capacity of
the treatment plant;or
c. Is designated as an SIU by the control authority.
G. Combined Sewer Systems. A treatment works that has a combined sewer system must complete Part G(Combined Sewer Systems).
ALL APPLICANTS MUST COMPLETE PART C (CERTIFICATION)
RECEIVED/NCDEQ/DWR
MAR 17 2016
Water Quality
Permitting Section
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 1 of 22

FACILITY NAME AND PERMIT NUMBER: PERMIT ACTION REQUESTED: RIVER BASIN:
C• c I g��:z
'%OaJ,u e r I3' Ip c✓ .... hoc.:iC I1+C: OG Z.7 2`r�r
BASIC APPLICATION INFORMATION
PART A.BASIC APPLICATION INFORMATION FOR ALL APPLICANTS:
All treatment works must complete questions A.1 through A.8 of this Basic Application Information Packet.
A.1. Facility Information.
Facility Name -2"4J:11 .r %3/ctv n.�� Ic�C K1 GcIW+P
Mailing Address
t31o��. � vc'k . NCS :ZiGO
Contact Person 1' / .K_ l) (alt FFlw r►'7A4kt.k 1=-Y; i f G= G.r7a:
Title I ri,t-(rt f/n.u•.=S Si '•'."u.scat C!ZC
Telephone Number (bZ ) L'95 • 5 7.2k>
Facility Address 7110 t-10),.; 3 Z i
(not P.O.Box) �I loa. .•�'•1 CC-K . /•2,1C- 2v6L`J
A.2. Applicant Information. If the applicant is different from the above,provide the following:
Applicant Name !c c' C 5 le
Mailing Address � G 141
TIPw.ti , # G IL
Contact Person
Title 1C.iv ill
Telephone Number (� ?`� SZC'Z
Is the applicantic�ntthe owner
�orr operatorop (or both)of the treatment works?
a owner L� operator
Indicate whether correspondence–enregarding this permit should be directed to the facility or the applicant.
El facility 1 applicant
A.3. Existing Environmental Permits. Provide the permit number of any existing environmental permits that have been issued to the treatment works
(include state-issued permits).
NPDES N( c:)0 Z1 26' PSD
UIC Other
RCRA Other
A.4. Collection System Information. Provide information on municipalities and areas served by the facility. Provide the name and population of each
entity and,if known,provide information on the type of collection system(combined vs.separate)and its ownership(municipal,private,etc.).
Name Population Served Type of Collection System Ownership
ti .. irk l/c:k (_F .ry
Total population served
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 2 of 22

FACILITY NAME AND PERMIT NUMBER:
1rCw�J l�r } PERMIT ACTION REQUESTED: RIVER BASIN:
R(U, ' 2/ 7
IL)
A.S. Indian Country.
a. Is the treatment works located�i-n IndianInCountry?
ID Yes Lr1 No
b. Does the treatment works discharge to a receiving water that is either in Indian Country or that is upstream from(and eventually flows
through)Indian Country? �y
❑ Yes LJ No
A.6. Flow. Indicate the design flow rate of the treatment plant(i.e.,the wastewater flow rate that the plant was built to handle). Also provide the
average daily flow rate and maximum daily flow rate for each of the last three years. Each year's data must be based on a 12-month time period
with the 12'month of"this year"occurring no more than three months prior to this application submittal.
a. Design flow rate . e0C, mgd
Two Years Ago Last Year This Year
b. Annual average daily flow rate • 2 7 g 274 ,2t3
c. Maximum daily flow rate q 7`! I. 72- / i'1 c'
A.7. Collection System. Indicate the type(s)of collection system(s)used by the treatment plant. Check all that apply. Also estimate the percent
contribution(by miles)of each.
Er
Separate sanitary sewer /C+D
❑ Combined storm and sanitary sewer
A.B. Discharges and Other Disposal Methods.
a. Does the treatment works discharge effluent to waters of the U.S.? 'Yes ❑ No
If yes,list how many of each of the following types of discharge points the treatment works uses:
i. Discharges of treated effluent 0 t4C
ii. Discharges of untreated or partially treated effluent c
iii. Combined sewer overflow points 6
iv. Constructed emergency overflows(prior to the headworks) G'
v. Other C)
b. Does the treatment works discharge effluent to basins,ponds,or other surface impoundments I2/
that do not have outlets for discharge to waters of the U.S.? CI Yes !19 No
If yes,provide the following for each surface impoundment:
Location:
Annual average daily volume discharge to surface impoundment(s) mgd
Is discharge ❑ continuous or ❑ intermittent?
c. Does the treatment works land-apply treated wastewater? ❑ Yes I-1 No
If yes,provide the following for each land application site:
Location:
Number of acres:
Annual average daily volume applied to site: mgd
Is land application ❑ continuous or ❑ intermittent?
d. Does the treatment works discharge or transport treated or untreated wastewater to another (may
treatment works? LJv Yes ❑ No
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 3 of 22

FACILITY NAME AND PERMIT NUMBER: PERMIT ACTION REQUESTED: RIVER BASIN:
L r 26c, A-12(.4.) izmi
If yes,describe the mean(s)by which the wastewater from the treatment works is discharged or transported to the other treatment works
(e.g.,tank truck,pipe).
(
,J I vete_ �vr.,,e,-,-k i l fir:rtit LtL,51,,z si 4t. 5 Re A Ci z
If transport is by a party other than the applicant,provide:
Transporter Name
Mailing Address 2. 0. t3 / 20 (p
1/lL�l2 f'N IC-rl AJC C t.
Contact Person (Yl&(L1L ec"n
Title n t� .���f� Q r r c 6Z.
Telephone Number ({j h) L4 3-3 7 filo
For each treatment works that receives this discharge,provide the following:
Namec �..[...J„� �0�, .2 �zc f)
Mailing Address ((k)5- AcAJC&tir.AL16
(e�o
i:;1 A)c'. . /LS/t�� .�C)‘>
Contact Person (r A)--Li Ocat
Title -,i(
Telephone Number (E)f)) T S 1 2 f!I k
If known,provide the NPDES permit number of the treatment works that receives this discharge kr. 00 ?3`i
Provide the average daily flow rate from the treatment works into the receiving facility. , O( 2.. mgd
e. Does the treatment works discharge or dispose of its wastewater in a manner not included a/
in A.B.through A.8.d above(e.g.,underground percolation,well injection): ❑ Yes L" No
If yes,provide the following for each disposal method:
Description of method(including location and size of site(s)if applicable):
Annual daily volume disposed by this method:
Is disposal through this method ❑ continuous or ❑ intermittent?
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 4 of 22

FACILITY NAME AND PERMIT NUMBER: PERMIT ACTION REQUESTED: RIVER BASIN:
sjC_Co 2-7 2800
WASTEWATER DISCHARGES:
If you answered"Yes"to question A.8.a,complete questions A.9 through A.12 once for each outfall(including bypass points)through
which effluent is discharged. Do not include information on combined sewer overflows in this section. If you answered"No"to question
A.8.a,go to Part B,"Additional Application Information for Applicants with a Design Flow Greater than or Equal to 0.1 mgd."
A.9. Description of Outfall.
a. Outfall number G'b
b. Location l o" , ) c%r t l C li ,.� a 'lL .
(City or town,if applicable) (Zipp Code)
c-r
(County) (State)
34 Ot, 27 81 40 i 2—
(Latitude) (Longitude)
c. Distance from shore(if applicable) t)l& ft.
d. Depth below surface(if applicable) N I.. ft.
e. Average daily flow rate , 2`fj 3 mgd
f. Does this outfall have either an intermittent or a periodic discharge? 111 Yes © No (go to A.9.g.)
If yes,provide the following information:
Number f times per year discharge occurs:
Average duration of each discharge:
Average flow per discharge: mgd
Months in which discharge occurs:
g. Is outfall equipped with a diffuser? Yes No
A.10. Description of Receiving Waters.
a. Name of receiving water TY)i -1 (� �.,�iC . 5,,- /
b. Name of watershed(if known)
United States Soil Conservation Service 14-digit watershed code(if known):
c. Name of State Management/River Basin(if known): 142 t. ,=,�
United States Geological Survey 8-digit hydrologic cataloging unit code(if known):
d. Critical low flow of receiving stream(if applicable)
acute cfs chronic cfs
e. Total hardness of receiving stream at critical low flow(if applicable): mg/I of CaCO,
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 5 of 22

FACILITY NAME AND PERMIT NUMBER: PERMIT ACTION REQUESTED: RIVER BASIN:
�(�2J•ar, K-c�l� h-'C' Cc Z7224E.
A.11. Description of Treatment
a. What level of treatment are provided? Check all that apply.
❑ Primary 0 Secondary
❑ Advanced ❑ Other. Describe:
b. Indicate the following removal rates(as applicable):
Design BOD5 removal or Design CBOD5 removal SS
Design SS removal �`S
Design P removal
Design N removal rJ j
Other
c. What type of disinfection is used for the effluent from this outfall? If disinfection varies by season,please describe:
Ckia2 t1J C7A
If disinfection is by chlorination is dechlorination used for this outfall? �2-Yes ❑ No
LJ
Does the treatment plant have post aeration? Yes ❑ No
A.12. Effluent Testing Information. All Applicants that discharge to waters of the US must provide effluent testing data for the following
parameters. Provide the indicated effluent testing required by the permitting authority for each outfall through which effluent is
discharged. Do not include information on combined sewer overflows in this section. All information reported must be based on data
collected through analysis conducted using 40 CFR Part 136 methods. In addition,this data must comply with QA/QC requirements of
40 CFR Part 136 and other appropriate QA/QC requirements for standard methods for analytes not addressed by 40 CFR Part 136. At a
minimum,effluent testing data must be based on at least three samples and must be no more than four and one-half years apart.
Outfall number: r',
MAXIMUM DAILY VALUE AVERAGE DAILY VALUE
PARAMETER
Value Units Value Units Number of Samples
pH(Minimum) 4> s.u. t..)1.-Ce
pH(Maximum) �s.u. Z. 4,
Flow Rate ( , 1 [ I r!e l7 . 2 E t 11 'for
Temperature(Winter) i S' (°. ( p c, f. lar)Li
Temperature(Summer) 2.3 2, �' >X t-c.Y`;Z
•For pH please report a minimum and a maximum daily value
MAXIMUM DAILY AVERAGE DAILY DISCHARGE
DISCHARGE ANALYTICAL
POLLUTANT METHOD ML/MDL
Conc. Units Conc. Units Number of
Samples
CONVENTIONAL AND NON CONVENTIONAL COMPOUNDS
BIOCHEMICAL OXYGEN BOD5 )( I (11,?/ ( ( ,`L t''IJ�f jxti4- 3c-1 z tot3 30/*
DEMAND(Report one) CBOD5
FECAL COLIFORM 3 g0 (Ci„,( 3 04. 5,+i q 2-ZL1) .too/4.Oz)
TOTAL SUSPENDED SOLIDS(TSS) (( .G �r�bl 2. 72 fYl � i )C.'e.- 5..1 2S`4o 30/y-S
END OF PART A.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 6 of 22

FACILITY NAME AND PERMIT NUMBER: PERMIT ACTION REQUESTED: RIVER BASIN:
-61 4.)„1,9Re LIC.O0 2:7
BASIC APPLICATION INFORMATION
PART B. ADDITIONAL APPLICATION INFORMATION FOR APPLICANTS WITH A DESIGN FLOW GREATER THAN OR
EQUAL TO 0.1 MGD(100,000 gallons per day).
All applicants with a design flow rate Z 0.1 mgd must answer questions B.1 through B.6. All others go to Part C(Certification).
B.1. Inflow and Infiltration. Estimate the average number of gallons per day that flow into the treatment works from inflow and/or infiltration.
25,IVCI gpd
Briefly explain any steps underway or planned to minimize inflow and infiltration. ff
I n ii' c T :- ( ,t/In.lc.:� I S'a» S'l•)wi't
B.2. Topographic Map. Attach to this application a topographic map of the area extending at least one mile beyond facility property boundaries. This
map must show the outline of the facility and the following information. (You may submit more than one map if one map does not show the entire
area.)
a. The area surrounding the treatment plant,including all unit processes.
b. The major pipes or other structures through which wastewater enters the treatment works and the pipes or other structures through which
treated wastewater is discharged from the treatment plant. Include outfalls from bypass piping,if applicable.
c. Each well where wastewater from the treatment plant is injected underground.
d. Wells,springs,other surface water bodies,and drinking water wells that are: 1)within Y.mile of the property boundaries of the treatment
works,and 2)listed in public record or otherwise known to the applicant.
e. Any areas where the sewage sludge produced by the treatment works is stored,treated,or disposed.
f. If the treatment works receives waste that is classified as hazardous under the Resource Conservation and Recovery Act(RCRA)by truck,rail,
or special pipe,show on the map where the hazardous waste enters the treatment works and where it is treated,stored,and/or disposed.
B.3. Process Flow Diagram or Schematic. Provide a diagram showing the processes of the treatment plant,including all bypass piping and all
backup power sources or redunancy in the system. Also provide a water balance showing all treatment units,including disinfection(e.g.,
chlorination and dechlorination). The water balance must show daily average flow rates at influent and discharge points and approximate daily flow
rates between treatment units. Include a brief narrative description of the diagram.
B.4. Operation/Maintenance Performed by Contractor(s).
Are any operational or maintenance aspects(related to wastewater treatment and effluent quality)of the treatment works the responsibility of a
contractor? ® Yes ❑ No
If yes,list the name,address,telephone number,and status of each contractor and describe the contractor's responsibilities(attach additional
pages if necessary).
Name: c-.uti It �C -c -Taal
Mailing Address: D . `�; 2 cc,4,
Telephone Number: ( 'i ) 433 4,7
Responsibilities of Contractor: V L r+ C'cci< V\ t•-; nJ
S I t•cc etc h; . c. '-
B.5. Scheduled improvements and Schedules of Implementation. Provide information on any uncompleted implementation schedule or
uncompleted plans for improvements that will affect the wastewater treatment,effluent quality,or design capacity of the treatment works. If the
treatment works has several different implementation schedules or is planning several improvements,submit separate responses to question B.5
for each. (If none,go to question B.6.)
a. List the outfall number(assigned in question A.9)for each outfall that is covered by this implementation schedule.
/1 � t
%N2 it , r5 C' . /L'c'N !t LL, �(`o i& , rtc U,�f1a!L
b. Indicate whether the planned improvements or implementation schedule are required by local,State,or Federal agencies.
❑ Yes ❑ No
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 7 of 22

FACILITY NAME AND PERMIT NUMBER: PERMIT ACTION REQUESTED: RIVER BASIN:
/I.IC'DU 2 7 2f-4; til
c. If the answer to B.5.b is"Yes,"briefly describe,including new maximum daily inflow rate(if applicable).
d. Provide dates imposed by any compliance schedule or any actual dates of completion for the implementation steps listed below,as
applicable. For improvements planned independently of local,State,or Federal agencies,indicate planned or actual completion dates,as
applicable. Indicate dates as accurately as possible.
Schedule Actual Completion
Implementation Stage MM/DD/YYYY MM/DD/YYYY
Begin Construction
End Construction I I I l
Begin Discharge
Attain Operational Level
e. Have appropriate permits/clearances concerning other Federal/State requirements been obtained? ❑ Yes ❑ No
Describe briefly:
B.6. EFFLUENT TESTING DATA(GREATER THAN 0.1 MGD ONLY).
Applicants that discharge to waters of the US must provide effluent testing data for the following parameters. Provide the indicated
effluent testing required by the permitting authority for each outfall through which effluent is discharged. Do not include information
on combine sewer overflows in this section. All information reported must be based on data collected through analysis conducted
using 40 CFR Part 136 methods. In addition,this data must comply with QA/QC requirements of 40 CFR Part 136 and other appropriate
QA/QC requirements for standard methods for analytes not addressed by 40 CFR Part 136. At a minimum effluent testing data must be
based on at least three pollutant scans and must be no more than four and on-half years old.
Outfall Number: oG 1
MAXIMUM DAILY AVERAGE DAILY DISCHARGE
DISCHARGE ANALYTICAL
POLLUTANT METHOD ML/MDL
Conc. Units Conc. Units Number of
Samples
CONVENTIONAL AND NON CONVENTIONAL COMPOUNDS
AMMONIA(as N) S• i Alt)// _ 52, (hrJL ,I.: ?13 N L
CHLORINE(TOTAL
RESIDUAL,TRC) 2 1W // w X44 1-1AL 14 e t T $l'
DISSOLVED OXYGEN .17 3 .7 Mrl S NI w clL 5,v)62—t[j 3 ? 7 D
TOTAL KJELDAHL
NITROGEN(TKN) it&./( Ike/, S l,., ,,� '` A 3 CI 3 /..)
NITRATE PLUS NITRITE
NITROGEN q-3"L 3 4-2- M&- it , l t.J 5rt4-1 �SGi N SIG h;,/lA
OIL and GREASE /llr}// 141/I '72"L A I�L�}- IV I A
PHOSPHORUS(Total) ' 7 O 1'4,1�1 , O . I'Z e/i .Sirn i f A J �rl t 4SG�>?E �iA
TOTAL DISSOLVED SOLIDS 1`' 1
(TDS) �"�I// 14 9/1 12.s4c C. ►v 1A
OTHER �1A
END OF PART B.
REFER TO THE APPLICATION OVERVIEW(PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 8 of 22

FACILITY NAME AND PERMIT NUMBER: PERMIT ACTION REQUESTED: RIVER BASIN:
t ,
' itb 00 2 7 Z
BASIC APPLICATION INFORMATION
PART C. CERTIFICATION
All applicants must complete the Certification Section. Refer to instructions to determine who is an officer for the purposes of this
certification. All applicants must complete all applicable sections of Form 2A,as explained in the Application Overview. Indicate below which
parts of Form 2A you have completed and are submitting. By signing this certification statement,applicants confirm that they have reviewed
Form 2A and have completed all sections that apply to the facility for which this application is submitted.
Indicate which parts of Form 2A you have completed and are submitting:
Basic Application Information packet Supplemental Application Information packet:
El Part D(Expanded Effluent Testing Data)
El Part E(Toxicity Testing: Biomonitoring Data)
El Part F(Industrial User Discharges and RCRA/CERCLA Wastes)
❑ Part G(Combined Sewer Systems)
ALL APPLICANTS MUST COMPLETE THE FOLLOWING CERTIFICATION.
I certify under penalty of law that this document and all attachments were prepared under my direction or supervision in accordance with a system
designed to assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who
manage the system or those persons directly responsible for gathering the information,the information is,to the best of my knowledge and belief,true,
accurate,and complete. I am aware that there are significant penalties for submitting false information,including the possibility of fine and imprisonment
for knowing violations. �--
Name and official title -50cr�0 '' '✓ TO cIAA c: actc(C_
Signature
AV r/
Telephone number . b) 2 O 7 Z(7)
Date signed
Upon request of the permitting authority,you must submit any other information necessary to assure wastewater treatment practices at the treatment
works or identify appropriate permitting requirements.
SEND COMPLETED FORMS TO:
NCDENR/ DWQ
Attn: NPDES Unit
1617 Mail Service Center
Raleigh, North Carolina 27699 1617
RECEIVED/NCDEQIDVVR
MAR 17 2",h
P:Wata)ityiGn
ittiterrg '.Nc(v
EPA Form 3510-2A(Rev.1-99). Replaces EPA forms 7550-6&7550-22. Page 9 of 22

PAT MCCRORY
?,i Guc,ruur
DONALD R. VAN DER VAART
Water Resources S. JAY ZIMMERMAN
ENVIRONMENTAL QUALITY
March 21, 2016
Scott Fogleman,Town Manager
Town of Blowing Rock WWT
PO Box 47
Blowing Rock,NC 28605
Subject: Acknowledgement of Permit Renewal
Application No. NC0027286
Blowing Rock WWTP
Watauga County
Dear Permittee:
The Water Quality Permitting Section has received your permit renewal application on March 17,
2016. A member of the NPDES Unit will review your application. They will contact you if additional
information is required to complete your permit renewal. Per G.S. 150B-3 your current permit does not
expire until permit decision on the application is made. Continuation of the current permit is contingent on
timely and sufficient application for renewal of the current permit. Please respond in a timely manner to
requests for additional information necessary to complete the permit application.
If you have any additional questions concerning renewal of the subject permit, please contact Sonia
Gregory at 919-807-6333 or [e-mail].
Sincerely,
W lrew T14.eo'fo-rot'
Wren Thedford
Wastewater Branch
cc: Central Files
NPDES
Winston-Salem Regional Office
State of North Carolina I Environmental Quality I Water Resources
1617 Mail Service Center I Raleigh,North Carolina 27699-1617
919-807-6300