20160310 Ver 1_Application_20160329

March 18, 2016
Division of Water Quality Wetland Unit
1650 Mail Service Center
Raleigh, NC 27699-1650
MAK 5
DEQ-WATERRES`)URCES
401 & BUFFER PERMITTING
My signature below authorizes Sonny Tyson of Sonny's Construction to act as my agent to file the
abbreviated application form for applying for a 401 Water Quality Certification to impact
FERC (Federal Energy Regulatory Commission) regulated lake shore or bottom under the
U.S. Army corps of Engineers Permit GP 30.
1 �
Date
Chris Clontz
6424 Old Greensboro Road
Thomasville, NC 27360

The following is an abbreviated application form for those applying for a 401 Water
Quality Certification to impact FERC (Federal Energy Regulatory Commission)
regulated lake shore or bottom under the U.S. Army corps of Engineers Permit
GP30. This Application cannot be used for wetland or stream impacts. Please
provide seven (7) copies of this application and supporting information as well as a
non-refundable application fee to the Division of Water quality of $240.00 for
impacts of to lake bottom of less than 1 acre and $475.00 for impacts to lake bottom
of greater or equal to 1 acre.
Applications should be sent to:
Division of Water Quality Wetland Unit
1650 Mail Service Center
Raleigh, NC 27699-1650
I. Applicant Information
1. Owner/Applicant Information
Name: Chris Clontz Mailing Address
Site Address HiVh Shores Road 6424 Old Greensboro Road
Norwood, NC 28128 Thomasville, NC 27360
Telephone Number: [phone] Alt Number
E-mail address:
2. Agent Information (A signed and dated copy of the Agent Authorization letter
must be attached if the Agent has signatory authority for the owner/applicant.)
Name: Sonny Tyson
Company Affilaition Sonny's Construction
Mailing Address: 186 Vineyard Road
Norwood, NC 28128
Telephone Number: [phone] Fax Number
E-mail address: [e-mail]
II. Project Information
Attach a vicinity map clearly showing the location of the property with respect to
local landmarks such as towns, rivers, and roads. Also provide a detailed site
plan showing property boundaries and development plans in relation to
surrounding properties. You may use the diagram below to make a hand sketch of
your project. Also see the example below for guidance. Both the vicinity map and
site plan must include a scale and north arrow. The footprints of all buildings,
impervious surfaces, or other facilities must be included.

1. Location
County:Stanly Nearest town: Norwood, NC
_
m.._...e -----------
Subdivision name or site address(include phase/lot number) _
High Shores Road Tillery Beach 4th Addition Stanly Parcel # 7910
Directions to site please include road numbers, landmarks,etc (This is not
Residential home with grass lawn and natural area S=r�
In Norwood traveling south, Turn left on Pee Dee Avenue
Continue on Pee Dee as rt turns.i ������� .-,,,-.....
._,_...... into Indian Mound Road
Right on Lake Shore Drive, left on Berry Hill Drive, Left on High Shores Road
2. Describe the existing land use of the site at the time of this
application:
Vacant Lot
3. Property size (acres) Approx .25 acres
4. Nearest body of water(stream/river/sound/ocean/lake): Lake Tillery
5. Describe the purpose of the proposed work:
Install Rip Rap on shoreline
6. List the type of equipment to be used to construct the project:
Excavation equipment
7. Amount of impact (including all excavation, backfill, rip rap, reatining walls,
etc.) below the normal lake pool level in square feet or acres:
220 Sauare feet
8. a.Amount of impact (including all clearing, backfill, excavation rip rap,
reatianing walls, etc.) above the normal pool lake level and 50 feet landward in
square feet or acres:
220 Square feet
b. Please describe vegetation above the normal pool lake level and 50 feet land-
ward to be impacted(number of trees for instance):
Natural area covered with grass and vegetation.
No vetation toaffected.
March 18, 2016
Date
(Agent's signature is valid only if an authorization letter from the applicant is provided)

Lake (Full Pond)
Remove and replace existing seawall
55 feet of rip -rap to be
installed on shoreline
2 to 1 slope
Approx 220 sq ft
(Lake Tillery)
Please approximately sketch the following information on this plan
(please provide dimensions for each item, such as 10 ft x 100 ft)
1) All proposed vegetation clearing (provide dimensions)
2)Location of rip rap or fill to be placed above the full pond elevation
3)Location of rip rap or fill to be placed below the full pond elevation
4)The location of any proposed structures such as buildings, retaining
walls, docks, etc
5)The location of any evacuation or dredging below the Full Pond
elevation.
6)Location of construction access corriders.

t . . . ®eas \q
E
\
...
..
(»(
yam,. . .. .
. . &\.
;\ger
ƒ� �
ƒ
• %
.
.

Chris Clontz
High Shores Road
Norwood, NC 28128
High Shores Road Tillery Beach 4th Addition Stanly Parcel # 7910

CD -0
O
CD
07 0 0 11
rD
CD
rD
CL
e
rD
CD P
CL-
O CD
CD
:ID
CL
Xc�
ee
ro
s.
au
k
sn