NCG030431 DMR SW (2)

Semi -Annual Stormwater Discharge Monitoring Report
for North Carolina Division of Water Quality General Permit No. NCG030000
Date submitted 3/30/2016
CERTIFICATE OF COVERAGE NO: NCG030431
FACILITY NAME: Engineered Controls International,.LLC (Whitsett)
COUNTY: Guilford
PERSON COLLECTING SAMPLES Clint Sorrell--PaceLabs
LABORATORY: PaceLabs-Raleigh/Charlotte/Asheville Lab Cert. #
67/12/40 Comments on sample collection or analysis:
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR 2016
SAMPLE PERIOD ® Jan -June ❑ July -Dec
or ❑ Monthly'
RE�fr�r5TO CLASS ❑ORW ❑HQW ❑Trout ❑PNA
❑Zero -flow ®Water Supply []SA
MAR 15 2016 Zother WS -1V, NSW, CA
CENTRAL FILES PLEASE REMEMBER TO SIGN ON PAGE 3 4
DWR SECTION
- ivionimy sampnng (insteaa OT semi-annuai) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
'For sampling periods with no discharge at any single.outfall, you must still submit this discharge monitoring report with a checkmark here.
3The total precipitation must be recorded using data from an on-site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
4 See General Permit, Table 3 identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
5 Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
-Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
*Facility was excused from monthly monitoring for Cu & Zn per DEMLR-WSRO letter dated 3/6/2014..
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 1 of 3
U No discharge this period 22 .
OutfallNo
Date Sample •
1;
• 24'.hour rainfall
Total §uspended Solids
PH,
Copper* "` Lead
'
Non -Polar O&G/ Total Toxic
Zinc* ` Total Petroleum
Collected
amount,. °
_
Standard units .
.
Organicss`
(mo/dd/yr)
Inches3`
Hydrocarbons
Benchmarks
100 "mg/L°
60 — 9.00.007
mg/L 0.030.mg/L
0.067 mg/L 15.mg/L i mg/L
SDO #001
2/24/2016 1
0.7
15
6.0 1
0.043 1 <0.005
0.091 <5 7T NA
- ivionimy sampnng (insteaa OT semi-annuai) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
'For sampling periods with no discharge at any single.outfall, you must still submit this discharge monitoring report with a checkmark here.
3The total precipitation must be recorded using data from an on-site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
4 See General Permit, Table 3 identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
5 Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
-Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
*Facility was excused from monthly monitoring for Cu & Zn per DEMLR-WSRO letter dated 3/6/2014..
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 1 of 3

Facilities that incorporate a solvent management plan into the Stormwater Pollution Prevention Plan may so certify, and the requirement for TTO monitoring
may be waived. The solvent management plan shall include a list of the total toxic organic compounds used and the other elements listed in the General
Permit. For those facilities electing to employ the TTO monitoring waiver, the discharger shall sign the -following certification statement:
"Based upon my inquiry of the person or persons directly responsible for managing compliance with the permit monitoring requirement for total toxic organics
(TTO), I certify that to the best of my knowledge and belief, no dumping of concentrated toxic organics into the stormwater or areas which are exposed to rainfall or
stormwater runoff has occurred since filing the last discharge monitoring report. I further certify that this facility is implementing the all the provisions of the
solvent management plan included in the Stormwater Pollution Prevention Plan."
NA
Name (Print name)
NA
Title (Print title)
(Signature)
(Date)
Note: Results must be reported in, numerical format. Do not report Below Detection Limit, BDL, <PQL, Non -detect, ND, or other similar non -numerical
format. When results are below the applicable limits, they must be reported in the format, "<XX me/L", where XX is the numerical value of the detection
limit, reporting limit, etc. in mg/L. i
Note: If you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Part B: Vehicle Maintenance Area Monitoring Results: only for facilities averaging > 55 gal of new oil per month.
U No discharge
L_ NA I NA ! I NA NA I NA I NA
this period?'
roomotes Trom rart A also apply io anis Part is
* See General Permit text, Table 5, identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 2 of 3,

Note: If you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
FOR PART A AND PART B MONITORING RESULTS:
• A BENCHMARK EXCEEDANCE TRIGGERS TIER 1 REQUIREMENTS. SEE PERMIT PART II SECTION B.
• 2 EXCEEDANCES 1N A ROW FOR THE SAME PARAMETER AT THE SAME OUTFALL TRIGGER TIER 2 REQUIREMENTS. SEE PERMIT PART II SECTION B.
• TIER 3: HAS YOUR FACILITY.HAD 4 OR MORE BENCHMARK EXCEEDENCES FOR THE SAME PARAMETER AT ANY ONE OUTFALL? YES ® NO ❑
IF YES, HAVE YOU CONTACTED THE DWQ REGIONAL OFFICE? YES ® NO ❑
REGIONAL OFFICE CONTACT NAME: Aana Taylor -Smith Note: Tier 2 Monthly Monitoring Status for Copper & Zinc reduced to Semi-annual per DEMLR Letter
dated 3/6/2014.
Mail arr original and one copy of this DMR including all "No Discharge" reports, within 30 days of receipt of the lab results (or at end of monitoring period
in the case of "No Discharge" reports) to:
Division of Water Quality
Attn: DWQ Central Files
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
YOU MUST SIGN THIS CERTIFICATION FOR ANY INFORMATION REPORTED:
"I certify, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to
assure that qualified personnel groperly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or
those persons directly responsible for gathering the information, the information submitted is, to the.best of my knowledge.and belief, true, accurate, and complete. I
am awarelt there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations."
of Permi ee) Jimmy McCandies, Environmental / Safety Coordinator (Date)
Permit Date: 11/1/2012-10/31/2017
SWU-245, last revised 10/25/2012
Page 3 of 3