HomeMy WebLinkAboutWQ0042509_Application (FTSE)_20230426 FAST TRACK SEWER ENGINEERING CERTIFICATION RECEIVED/NCDEO/DWR
APR G 6 2023
PERMITTEE: Revolve Residential LLC
PERMIT it: WQ0042509 WORDS
PROJECT: Spencer West(Alloy Residential) MOORESVILLE REGIONAL OFFICE
ISSUE DATE: May 25, 2021
S/
This project shall not be considered complete nor allowed to operate in accordance with Condition 7 of
this permit until the Division has received this Certification and all required supporting documentation. It
should be submitted in a manner that documents the Division's receipt. Send the required documentation
the Regional Supervisor, Water Quality Regional Operations Section at the address at the bottom.
Any wastewater flow made tributary to the wastewater collection system extension prior to completion
of this Certification shall be considered a violation of the permit and shall subject the Permittee to
appropriate enforcement actions. The Permittee is responsible for tracking all partial certifications up
until a final certification is received. A Final Certification shall be a complete set of record drawings and
design calculations regardless of whether partials have been submitted.
PERMITTEE'S CERTIFICATION
I, the undersigned agent for the Permittee, hereby state that this project has been constructed pursuant
to the applicable standards & requirements, the Professional Engineer below has provided applicable
design/construction information to the Permittee, and the Permittee is prepared to operate & maintain
the wastewater collection system permitted herein or portions thereof.
Timothy McCollum,Manager 4/19/23
Printed Name,Title Signature Date
ENGINEER'S CERTIFICATION
Frank J. McMahan as a duly registered Professional En ineer in the State of North Carolina,
having been authorized to observe (® periodically, ❑ weekly, full time) the construction of the
project name and location as referenced above for the above Permittee hereby state that, to the best of
my abilities, due care and diligence was used in the observation of the following construction:
approximately 225 linear feet of 6 inch gravity sewer; such that the construction was observed to be built
within substantial compliance of this permit; 15A NCAC 02T; the Division of Water Resources' (Division)
Gravity Sewer Minimum Design Criteria adopted February 12, 1996 as applicable;the Division's Minimum
Design Criteria for the Fast-Track Permitting of Pump Stations and Force Mains adopted June 1, 2000 as
applicable; and other supporting materials.
North Carolina Professional Engineer's Seal w/signature & date: �--✓�
Final ❑ Partial (include description) _ SE,L
Certification Comments/Qualifiers (attach if necessary):
NC DWR—Water Quality Regional Operations Section 610 East Center Avenue,Suite 301, Mooresville, NC 28115
Mooresville Regional Office Phone: (704) 663-1699 FAX: (704)-633-6040
CERTIFICATION CHECKLIST
To be completed by the certifying engineer prior to operation of the permitted sewers, per 15A NCAC 02T.0116.
Certifying Engineer: Frank J. McMahan /P:D/NCDEQ/DWR
Certification Review Date: 04/19/2023
6 Spencer West(Alloy Residential): Alloy Residential Z023
WQ00 42509 Project County: Mecklenburg MOORESyll i Wo QROS
EGIONAL OFFICE
1) Has permittee information changed since the permit was issued (or last modified): change of mailing address,
change of ownership,transfer from developer to HOA/POA, etc. ❑Yes ® No
• If yes, please provide either a change of ownership form or new contact information. Note that transfer of
permits from the developer to the HOA/POA must occur with the first certification.
2) Have the as-built drawings have been signed,sealed, and dated by an N.C. PE? ® Yes ❑ No
3) Final Engineering certification? ® Yes ❑ No
• If Partial Engineering certification, provide detailed narrative including what is being certified in the current
phase,what was previously certified(if applicable),and what is left to be certified.
4) Adequate information related to sewer lines: ❑ Yes ❑ No ® N/A
• Three feet minimum cover has been provided for all sewers unless ferrous pipe was installed.
• Minimum diameters for gravity sewers are 8-inches for public lines and 6-inches for private lines.
• Manholes have been installed: At the end of each line, at all changes in grade, size, or alignment, at all
intersections, and at distances not greater than 425 feet; minimum diameter shall be 4 feet (48-inches).
5) Adequate information related to pump stations: ❑ Yes ® No ❑ N/A
• Ensure power reliability option was selected per 15A NCAC 02T.0305(h).
6) Was project construction completed in accordance with all of the following: ® Yes ❑ No ❑ N/A
• 15A NCAC 02T, Minimum Design Criteria (MDC)for the permitting of Gravity Sewers (latest version), and MDC
for the Permitting of Pump Stations and Force Mains (latest version)?
If not, a variance approval is required in accordance with 15A NCAC 02T.0105(b), prior to certification and operation.
• Contact the Central Office to discuss the variance to determine a course of action.
• Applicant must submit two copies of the variance request form, plans, specifications, calculations, and any other
pertinent information to the Central Office (one hard copy, one digital copy).
• The central office will review the variance request, and if approvable, specific language regarding the variance
will be incorporated into the permit, either via a special condition or a supplementary letter. A copy of the
reissued permit with variance language or the variance letter must be maintained with the original documents.
7) Does the project contains high priority lines(15A NCAC 02T.0402(2))? ❑ Yes ® No
• If yes, ensure that the permit already contains the necessary condition related to high priority lines 15A NCAC
02T.0403 (a)(5). If the permit does not include this language,the Fast Track reviewer will reissue the permit with
the appropriate language.
8) Are Permit modifications are required for any changes resulting in non-compliance with this permit(including pipe
length difference of 10%or greater,change in flow, pump station design capacity design change of 5%or greater,and
change in the number/type of connections)? ❑ Yes ® No
• If yes, a permit modification request must be submitted to the appropriate Regional Office, and a modified
permit with revised certification must be issued prior to certification and operation.
NC DWR—Water Quality Regional Operations Section 610 East Center Avenue,Suite 301, Mooresville, NC 28115
Mooresville Regional Office Phone: (704) 663-1699 FAX: (704)-633-6040
RECEIVED/NODE0/1)WR
APR
CREATING PLACES
THAT MATTER.
April 19, 2023
State of North Carolina
Department of Environmental and Natural Resources
610 East Center Ave, Suite 301
Mooresville, NC 28115
Re: Wastewater Collection System Extension Permit
Alloy Residential
Mecklenburg County
Permit Number: WQ0042509
LandDesign PN: 1020183
To whom it may concern,
On behalf of Revolve Residential, we are providing herewith inspection reports,as built survey,and a final
certification for the Wastewater Collection System to serve Alloy Residential,located in Charlotte,NC.
This final certification package is being submitted to certify the construction and completion of Alloy
Residential sanitary sewer collection system under the fast track permit number W00042509.The project
consisted of approximately 225 LF of 6" PVC gravity sewer.Construction of this system was observed and
built within compliance of the permit.
Feel free to give me a call if you have any questions.
Respectfully Submitted,
rank J. McMahan, PE
LandDesign, Inc.
Enclosures
LANDDESIGN.COM
c
cn
m
m
a U) 0 '�
Z
m'
Cl) cn cn v CD
D 0
C/) Cl) cn
o n n n cn aZi
O O O =
0 6 6 . to3
o m rn w = O fD
0 0 o
6 D
C/) � a'i o
n n n cn w °
o 0 o O
m o 0
0 p
3
CD
Z N
m
Sll
O
n
O
O VI
7
W A (J A
O A p�
Ot m
O co
C�
G
CD
Z
Z Z Z Z to
to
lD
A A A A 0
o aCD
y (D.
3 0 0 0 0 n
..
O
N
C C C C CD
W (n N N CD
CD
00
W
O
cn -0 -u T �.
N w a) a) 3
cc cn UI V1 (n
N N N N ig
N a O_ d O_ p
0 •
�
X_
N
Ln
•
O
W
A
D
A
N
A
N
O
N
W