Person_Well Abandonment_20240731

WELL ABANDONMENT RECORD For Internal Use ONLY:
1.Well Contractor Information: WELL ABANDONMENT DETAILS
96.K L % ,'0'rJ 7a.For Geoprobe/DPT or Closed-Loop Geothermal Wells having the same
Well Contractor Name(or well owner personally abandoning well on his/her property) well construction/depth,only I iW-30 is needed. Indicate TOTAL NUMBER of
wells abandoned: 1
NC Well Contractor Certification Number 7b.Approximate volume of water remaining in well(s): '/./_(gal.)
6 V v >t
" Z�.101S TAL FOR WATER SUPPLY WELLS ONLY: T�
Company Name r
7c.Type of disinfectant used:
2.Well Construction Permit#:
List all applicable well construction permits(i.e.UIC,County,State,Variance,etc.)if known
7d.Amount of disinfectant used:
3.Well use(check well use):
Water Supply Well: 7e. ling materials used(check all that apply):
❑Agricultural QM icipal/Public Neat Cement Grout ❑ Bentonite Chips or Pellets
❑Geothermal(Heating/Cooling Supply) esidential Water Supply(single) ❑ Sand Cement Grout ❑Dry Clay
❑Industrial/Commercial ❑Residential Water Supply(shared) ❑Concrete Grout ❑ Drill Cuttings
❑Irri ation ❑ Specialty Grout 1006ravel
Non-Water Supply WeII: . Lr ❑ Bentonite Slurry ❑Other(explain under 7g)
❑Monitoring •• ecovery
Injection Well: 2 )1 7f.For each material selected above,provide amount of materials used:
❑Aquifer Recharge '� 3 , Groundwater Remediation
❑Aquifer Storage and Recovery
❑Aquifer Test )ttsG;l 1CA;26tormwater Drainage �D LA die1"1Gri}
❑Experimental Technology ❑Subsidence Control
7g.Provide a,brief description of the abandonment procedure:
❑Geothermal(Closed Loop) ❑Tracer I
❑Geothermal(Heatin Coolin Return) ❑Other(explain under 7 ) Q(� V ('&U�b6A %In
4.Date well(s)abandoned: 6 •v_/ ' �I.ar �, �trl �t• q7.eL
5a.Well location:
Facility/Owner Name Facility ID#(ifapplicable) 8.Certification:
Physical Address,City,and Zip Signature of Certified Well Contracto or Well Owner Date
Ac_7!J✓1 By signing this form,1 hereby certify that the well(s) was(were)abandoned in
County Parcel Identification No.(PIN) accordance with 15A NCAC 02C.0100 or 2C.0200 Well Construction Standards
and that a copy of this record has been provided to the well owner.
Sb.Latitude and longitude in degrees/minutes/seconds or decimal degrees:
(if well field one lat/long is sufficient) t� 9.Site diagram or additional well details:
3/ • 3!9"9b3 N �6 a Q�—/Q��'� W You may use the back of this page to provide additional well site details or well
II . /� [L� abandonment details. You may also attach additional pages if necessary.
CONSTRUCTION DETAILS OF WELL(S)BEING ABANDONED SUBMITTAL INSTRUCTIONS
Attach well construction record(s)ifavailable.For multiple injection or non-water supply wells
ONLY with the same constructionlabandonment,you can submit one form. 1Oa. For All Wells: Submit this form within 30 days of completion of well
6a.Well ID#: abandonment.to the following:
Division of Water Resources,Information Processing Unit,
6b.Total well depth: C(�-(ft.) 1617 Mail Service Center,Raleigh,NC 27699-1617
10b.For Iniection Wells: In addition to sending the form to the address in IOa
6c.Borehole diameter. (in.)
above, also submit one copy of this form within 30 days of completion of well
abandonment to the following:
6d.Water level below ground surface: S� A) Division of Water Resources,Underground Injection Control Program,
1636 Mail Service Center,Raleigh,NC 27699-1636
6e.Outer casing length(if(mown): 0 A) 10c.For Water Supply&Injection Wells: In addition to sending the form to the
address(es)above,also submit one copy of this form within 30 days of completion
of well abandonment to the county health department of the county where
6f.Inner casing/tubing length(if known): So ft.) abandoned.
6g.Screen length(if known): • t (ft.)
Form G W-30 North Carolina Department of Environmental Quality-Division of Water Resources Revised 2-22-2016

22 , 2q
c.S C .� rG ►"�01 cCi InIJ S
t
4