Person_Well Abandonment_20240610 (4)

WELL ABANDONMENT RECORD For Internal Use ONLY:
1.Well Contractor Information: WELL ABANDONMENT DETAILS
Gary Sim cox 7a.For Geoprobe/DPT or Closed-Loop Geothermal Wells having the same
\\rl I(,nnraaor Name(or well owner personally abandoning well on his/her property) well cwnstruction/depth,only 1 GW-30 is needed. Indicate TOTAL NUMBER of
2944-B wells abandoned:
\( \\cII( ,Tit ractor Certification Number 7b.Approximate volume of water remaining in well(s): 1.1 IxAL 1
S&M E, Inc. FOR WATER SUPPLY WELLS ONLY:
Compan}Name
7c.Type of disinfectant used:
2.Well Construction Permit#:
List all applicable well construction permits(i.e.UIC,Couno,State,Variance,etc.)ifknown
7d.:amount of disinfectant used:
3.Well use(check well use):
Water Supply Well: 7e.Sealing materials used(check all that apply):
[]Agricultural ❑Municipal/Public ❑Neat Cement Grout S Bentonite Chips or Pellets
❑Geothermal(Heating/Cooling Supply) ❑Residential Water Supply(single) ❑ Sand Cement Grout ❑ Dry Clay
❑Industrial/Commercial ❑Residential Water Supply(shared) ❑Concrete Grout ❑Drill Cuttings
OIrrigation ❑ Specialty Grout
Non-Water Supply Well: ❑ Bentonite Slurry ❑Other(explain under 7g)
❑Monitoring ❑Recovery JUN 1 0 M
Injection Well: 7E For each material selected above,provide amount of materials used:
❑Aquifer Recharge eGroundwater Remediation 30 l bs r'4VX-4-ix 1 LW*
❑Aquifer Storage and Recovery ❑Salinity Barrier
❑Aquifer Test ❑Stormwater Drainage
❑Experimental Technology ❑Subsidence Control 7g,Provide a brief description of the abandonment procedure:
❑Geothermal(Closed Loop) ❑Tracer Filled well casing with bentonite chips to
❑Geothermal(Heating/Cooling Return) ❑Other(explain under 7 )
surface and hydrated.
a.Date weB(s)abandoned: 05/29/24
5a.Well location:
Huffman Oil Company
Facility/Owner Name Facility 1D9(if applicable) S.Certification:
9353 NC-157 Hurdle Mills, NC 27541 '444— 05/31/24
Physical Address,City,and Zip Signature of Certified Well Contractor or Well Owner Date
Person By signing this form. /hereby ceKify that the well(s)was(were)abandoned in
County Parcel Identification No.(PIN) accordance with 1 SA NCAC 02C.0100 or 2C.0100 Well Construction Standards
and that a copy of this record has been provided to the well owner.
Sb.Latitude and longitude in degrees/minutes/seconds or decimal degrees:
(if well field,one lat/long is sufficient) 9.Site diagram or additional well details:
36° 16t 25.12" N 79° 02t 48.98t� W You may use the back of this page to provide additional well site details or well
abandonment details. You may also attach additional pages if necessary.
CONSTRUCTION DETAILS OF WELL(S)BEING ABANDONED SUBMITTAL INSTRUCTIONS
Anach well construction record(s)ifavailable.For multiple injection or non-water supply wells
ONLY with the same construction/abandonment,you can submit one form. 10a. For All Wells: Submit this form within 30 days of completion of well
6a Well ID#: AS-1 abandonment to the following:
Division of Water Resources,Information Processing Unit,
6b.Total«ell depth: 20.0 (ft) 1617 Mail Service Center,Raleigh,NC 27699-1617
10b.For Iniection Wells: In addition to sending the form to the address in 10a
6c.Borehole diameter: 2 (in.) above,also submit one copy of this form within 30 days of completion of well
abandonment to the following:
6d.NN ater level below ground surface: 13.14 (ft.) Division of Water Resources,Underground Injection Control Program,
1636 Mail Service Center,Raleigh,NC 27699-1636
6e.Outer casing length(if known): (ft.) 10c.For Water Supply&Iniection Wells: In addition to sending the form to the
address(es)above,also submit one copy of this form within 30 days of completion
of well abandonment to the county health department of the county where
6E Inner casing/tubing length(if known): (ft,) abandoned.
6g.Screen length(if known): (ft.)
Form GW-30 North Carolina Department of Environmental Quality-Division of Water Resources Revised 2-22-2016