NCG030063 DMR SW (7)

Semi-annual Stormwater Dis...large Monitoring Report
for North Carolina Division of Water Qualityeneral Permit No. NCG030000
Date submitted II thi. 1
15,
CERTIFICATE OF COVERAGE NO. NCG03 0 0 & 3
FACILITY NAME GE Me6owte,
COUNTY Ormnae.
PERSON COLLECTING SAMPLES _ JZrn S �Qhdergra,�I�
LABORATORY Mer4ec. %.SvtG- Lab Cert.# ItoS
Comments on sample collection or analysis:
'RaiII 0. ;L3 ivt.
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR W/.S
SAMPLE PERIOD ❑ Jan -June ❑ July -Dec
or © Monthly" Or-+o6ex- (month)
DISCHARGING TO CLASS ❑ORW ❑HQW []Trout ❑PNA
❑Zero -flow []watersupply ❑SA
❑Other
RECEIVEUPLEASE REMEMBER TO SIGN ON PAGES 2 AND/OR 3 4
NOV 2 3 2015
CFNTRAI FII FS F-1 Ain dicrhnrna Chir narinrl J`
Monthly sampling (instead of semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
4The total precipitation must be recorded using data from an on-site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
4 See General Permit, Table 3 identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
s Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 1 of 3
W.
Outfall No.
Date Sample
i
Collected
24-hour rainfall
Total Suspended Solids
p
H
p ,
Co
Copper
Lead
Zinc
Non -Polar O&G/
Total Petroleum
Total Toxic
amount,
Standard units
s
Organics
(mo/dd/yr)
Inches3
Hydrocarbons
Benchmarks =__>
_
-
100 mg/L or 50 mg/L4
6.0-9.0
0.007 mg/L
0.033 mg/L
0.067 mg/L
15 m /L
1 mg/L
001
104-05-
0. z3
L
7.37
0-0-21q
< 0.010
o. 4 97
4-S L
Oda
ro�� IS
O.A3
S m
-ice
0.o;.3
.co.o10
0./87
e r Y,
003
talx4hc
04-3
1,
7-y7
0.0/02
< 0.010
o.//9
< T M4L
boy
to �� 1S
.�3
II L
.yd-
0.015-
<0.010
o.IYI
<5-
006
io �7 /5
0- A3
1e W
7.5-.'t.
0.00
40-0/0
Q. p b
< $' �
---
Monthly sampling (instead of semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
4The total precipitation must be recorded using data from an on-site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
4 See General Permit, Table 3 identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
s Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 1 of 3
W.

Semi-annual Stormwater Dis' _,iaree Monitoring Report
for North Carolina Division of Water Qualit General Permit No. NCG030000
Date submitted 1(0
CERTIFICATE OF COVERAGE NO. NCG03 0 o ,3
FACILITY NAME CSE Mebaha.
COUNTY a
PERSON COLLECTINGSAMPLES J"Awu-S rPer�trarau�
LABORATORY Meri4"a� rrx_ Lab Cert. # 1 fes
Comments on sample collection or analysis:
'Ro►�Y,�.11 O, 023 in.
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR
SAMPLE PERIOD ❑ Jan -June ❑ July -Dec
or © Monthly' e3a4aloetr (month)
DISCHARGING TO CLASS ❑ORW ❑HQW ❑Trout ❑PNA
❑Zero -flow ❑Water Supply [:]SA
❑Other
PLEASE REMEMBER TO SIGN ON PAGES 2 AND/OR 3 4
FI Ain rlicrhnrno thin norint4>2
MOMMY sampimg pnsteao or semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
Z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
3The total precipitation must be recorded using data from an on-site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
4 See General Permit, Table 3 identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
5 Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 1 of 3
Outfall No,
Date Sample
i
Collected
24-hour rainfall
Total Suspended Solids
pH,
Copper
Lead
Zinc
Non -Polar b&G/
Total Petroleum
Total Toxic
amount,
Standard units
.
Organicss
(mo/dd/yr)
. Inches;
H drocarfions
Y
Benchmarks ==_>
_
-
100 mg/Lor 50 mg/L4
6.0-9.0
0.007 mg/L
0.03321/1.
0.067 mg/L
15 mg/L
1 mg/L
006
io �7 15
0. a3
9114h-
7.31
O.OSD
0.010
0.31M
<
007
to a -r s
0. A3
7-X1
0.013
40.010
0.050
14
--
MOMMY sampimg pnsteao or semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
Z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
3The total precipitation must be recorded using data from an on-site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
4 See General Permit, Table 3 identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
5 Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 1 of 3

Facilities that incorporate a solvent management plan into the Stormwater Pollution Prevention Plan may so certify, and the requirement for TTO monitoring
may be waived. The solvent management plan shall include a list of the total toxic organic compounds used and the other elements listed in the Generali
Permit. For those facilities electing to employ the TTO monitoring waiver, the discharger shall sign the following certification statement:
"Based upon my inquiry of the person or persons directly responsible for managing compliance with the permit monitoring requirement for total toxic organics!
(TTO), I certify that to the best of my knowledge and belief, no dumping of concentrated toxic organics into the stormwater or areas which are exposed to rainfall or
stormwater runoff has occurred since filing the last discharge monitoring report. I further certify that this facility is implementing the all the provisions of the
solvent management plan included in the Stormwater Pollution Prevention Plan."
enj
Name (Print name
i
Me,bawc `Plav� i- Lie:
Title (Print title)
ature (Date)
Note: Results must be reported in numerical format. Do not report Below Detection Limit, BDL, <PQL, Non -detect, ND, or other similar non -numerical
format. When results are below the applicable limits, they must be reported in the format, "<XX me/L" where XX is the numerical value of the detectio
limit, reporting limit, etc. in mg/L.
Note: If you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Part B: Vehicle Maintenance Area Monitoring Results: only for facilities averaging > 55 gal of new oil per month.
n Nn rJkrhnrna thic narinrl?Z
Outfall No. I
Date Sample'
Collectedl'
(mo/dd/yr)
24-hour rainfall-
amount;":
'Inches
Non-polar,0&G/TPHby
EPA' 1664.(SGT-HEM)
Total Suspended Solids
pH,'
Benchmarks'===>
_
-
15 mg/L
100 mg/Lor 50.mg/L*
6.0 — 9.0 SU
Footnotes from Part A also apply to this Part B
* See General Permit text, Table 5, identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
Permit Date :.r-6,41/2012-10/31/2017
;i
( SWU-245, last revised 10/2012'
Page 2 of 3

Note: If yot+ . _port a sample value in excess of the benchmark, you must implei. it Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
FOR PART A AND PART B MONITORING RESULTS:
• A BENCHMARK EXCEEDANCE TRIGGERS TIER 1 REQUIREMENTS. SEE PERMIT PART II SECTION B.
• 2 EXCEEDANCES INA ROW FOR THE SAME PARAMETER AT THE SAME OUTFALL TRIGGER TIER 2 REQUIREMENTS. SEE PERMIT PART II SECTION B.
• TIER 3: HAS YOUR FACILITY HAD 4 OR MORE BENCHMARK EXCEEDENCES FOR THE SAME PARAMETER AT ANYONE OUTFALL? YES ❑X NO ❑
IF YES, HAVE YOU CONTACTED THE DWQ REGIONAL OFFICE? YES © NO ❑
REGIONAL OFFICE CONTACT NAME: 'DM/Q Cer,+mt�-tI¢5 MovL l�IRrm��
Mail an original and one copy of this DMR including all "'No Discharge" reports within 30 days of receipt of the lab results (or at end of monitoring period
in the case of "No Discharge" reports) to:
Division of Water Quality
Attn: DWQ Central Files
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
YOU MUST SIGN THIS CERTIFICATION FOR ANY INFORMATION REPORTED:
"I certify, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to
assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or
those persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete.
am aware that there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations."
!! zhs'
(Date)
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 3 of 3