Loading...
HomeMy WebLinkAboutSW6120801_Designer's Certification_20120822State Stormwater Permit Permit No.SW6120801 Lot 1 A Averitt Properties Stormwater Permit No. SW6120801 Cumberland County Designer's Certification I, JY-y- '� • ZA-c( , as a duly registered q' in the State of North Carolina, having been authorized to observe eri dically I weekly) full time) the construction of the project, 1 es A r,QGC � —�Za (Project) for 1-U�,r}IOGk,_.�.c (Project Owner) hereby state that, to the best of my abilities, care and diligence was used in the observation of the project construction such that the construction was observed to be built within substantial compliance and intent of the approved plans and specifications. The checklist of items on page 2 of this form is included in the Certification. Noted deviations from approved plans and specification: Signature /( _ Registration Number 3lSr? Date b � 5Ep } 0 2013 I EA L . C) o fes,3/0 moo �T SEAL 031591 iw b �w P. ut'`,•�'�� �++++3jrflfi171er��� Page 5of6 State Stormwater Permit Permit No.SW6120801 Certification Requirements: 1. The drainage area to the system contains approximately the permitted acreage. ✓ 2. The drainage area to the system contains no more than the permitted / amount of built -upon area. 3. All the built -upon area associated with the project is graded such that the runoff drains to the system. ✓4. All roof drains are located such that the runoff is directed into the system. -✓ 5. The outlet/bypass structure elevations are per the approved plan. ✓ 6. The outlet structure is located per the approved plans. ✓ 7. Trash rack is provided on the outlet/bypass structure. 8. All slopes are grassed with permanent vegetation. �✓ 9. Vegetated slopes are no steeper than 3:1. �10. The inlets are located per the approved plans and do not cause short- circuiting of the system. 11. The permitted amounts of surface area and volume have been provided. 12. Required drawdown devices are correctly sized per the approved plans. 13. All required design depths are provided. 14. All required parts of the system are provided, such as a vegetated shelf, outlet structure, and a forebay. 15. The required system dimensions are provided per the approved plans. Please submit this Designer's Certification to: Cc: Fayetteville Regional Office Surface Water Protection 225 Green Street Systel Building Suite 714 Fayetteville, NC 28301-5043 Edward Byrne — Cumberland County - Building Inspections Page 6 of 6