310355_Sludge Survey (Reporting)_20230912

Appendix 1. Lagoon Sludge Survey Form Revised August 2008
A. Farm Permit or DWQ Identification Number Homestead Farm 2 -Wade Ward
B. Lagoon Identification 31-355
1E-N o+ +b 5 ca-Lc-
C. Person(s) Taking Measurements Cole Smith & Wade Ward
D. Date of Measurement 9/12/23 Tap 0
E. Methods/Devices Used for Measurement of:
a. Distance from the lagoon liquid surface to the top of the sludge layer.
Bucket lid on scaled pole O
b. Distance from the lagoon liquid surface to the bottom(soil) of the lagoon.
Lagoon design Bo+fDm
c. Thickness of the sludge layer if making a direct measurement with "core sampler". 2 �$; SS
N/A
W 31-7 ` x L20y
F. Lagoon Surface Area (using dimensions at inside top of bank): 1.48 (acres)
(Draw a sketch of the lagoon on a separate sheet, list dimensions, and calculate surface area. The lagoon
may have been built different than designed, so measurements should be made.) (�f p+ +0 SCE l
G. Estimate number of sampling points:
a. Less than 1.33 acres: Use 8 points
b. If more than 1.33 ac. 1.48 acres x 6 = 8.88 , with maximum of 24. to,F
(Using sketch and dimensions,develop a uniform grid that has the same number of intersections as the �' mv%kit
estimated number of sampling points needed.Number the intersection points on the lagoon grid so that data S Ctoao k
recorded at each can be easily matched.)
5 �
H. Conduct sludge survey and record data on "Sludge Survey Data Sheet' (Appendix 2). Also, at the 3i-
location of the pump intake, take measurements of distance from liquid surface to top of sludge terns /
layer and record it on the Data Sheet(last row); this must be at least 2.5 ft. when irrigating. zu" Fe
I. At the time of the survey, also measure the distance from the Maximum Liquid Level to the Present Liquid
Level (measure at the lagoon gauge pole): 0.4
J. Determine the distance from the top of bank to the Maximum Liquid Level 1.8
(use lagoon management plan or other lagoon records)
K. Determine the distance from the Maximum Liquid to the Minimum Liquid level: 2.2
(use lagoon management plan or other lagoon records)
L. Calculate the distance from the present liquid surface level to the Minimum Liquid Level 1.8
(Item K Minus Item I, assuming the present liquid level is below the Maximum Liquid Level)
M. Record from the Sludge Survey Data Sheet the distance from the present liquid surface level to the
lagoon bottom(average for all the measurement points) 10.2
N. Record from the Sludge Survey Data Sheet the distance from the present liquid surface level to the top
of the sludge layer(average for all the measurement points): 7.8
O. Record from the Sludge Survey Data Sheet the average thickness of the sludge layer: 2.4
P. Calculate the thickness of the existing Liquid Treatment Zone (Item N minus Item L): 6.0
Q. If Item O is greater than Item P, proceed to the Worksheet for Sludge Volume and Treatment Volume. Z gJ10
If Item O is equal to or less than Item P, you do not have to determine volumes. aVA�
0�
Completed by: Amanda Hatcher/NCCE-Duplin/910-296-2143 Date: 9/12/23
Print Name/Signature 0 VA411d fi_trl „_

Appendix 2. Sludge Survey Data Sheet* Revised August 2008
Lagoon Identification 31-355; Homestead Farm 2; Wade Ward �-��/,
Completed by: Amanda Hatcher tt-' - "''"1 Date: 9/12/23
Print Name Signature
(A) ( B ) ( C ) ( C)- ( B )
Grid Point Distance from liquid surface Distance from liquid surface Thickness of sludge layer
No. to top of sludge to lagoon bottom soil
Ft. & in. Ft. tenths Ft. & in. Ft. tenths Ft. & in. Ft. tenths
1 8.2 10.2 2.0
2 6.0 10.2 4.2
3 7.5 10.2 2.7
4 7.3 10.2 2.9
5 9.8 10.2 0.4
6 10.0 10.2 0.2
7 10.0 10.2 0.2
8 9.0 10.2 1.2
9 5.5 10.2 4.7
10 5.0 10.2 5.2
11 0.0 0.0 0.0
12 0.0 0.0 0.0
13 0.0 0.0 0.0
14 0.0 0.0 0.0
15 0.0 0.0 0.0
16 0.0 0.0 0.0
17 0.0 0.0 0.0
18 0.0 0.0 0.0
19 0.0 0.0 0.0
20 0.0 0.0 0.0
21 0.0 0.0 0.0
22 0.0 0.0 0.0
23 0.0 0.0 0.0
24 0.0 0.0 0.0
Number of oints with readings 10.0 X X 10.0 X X 10.0
Average of X X 7.8 X X 10.2 X X 2.4
points
F
p 7.4 X X X X X X
e
*All Grid Points and corresponding sludge layer thicknesses must be shown on a sketch attached to this
Sludge Survey Data Sheet.
Appendix 3. Worksheet for sludge volume and treatment volume Revised August 2008
The average thickness of the sludge layer and the thickness of the existing liquid (sludge-free)treatment zone are determined
from the information on the Lagoon Sludge Survey Form ( Items 0 and P, respectively). In this example, the average sludge

layer thickness is 2.5 feet and the existing liquid treatment zone is 3.5 feet. If the lagoon has a designed sludge storage volume,
see notes at end of the worksheet. The dimensions of the lagoon as measured and the side slope are needed
for calculations of sludge volume and of total treatment volume. If the lagoon is a standard geometric shape, the sludge
volume and the treatment volume in the lagoon can be estimated by using standard equations. For approximate volumes
of rectangular lagoons with constant side slope, calculate length and width at the midpoint of the layer, and multiply by layer
thickness to calculate layer volume, as shown in the example. For irregular shapes, convert the total surface area to a square
or rectangular shape. For exact volumes for lagoons with constant side slope, the "Prismoidal Equations" may be used.
Example Your Lagoon
1. Average sludge Layer Thickness (T) 2.5 ft. 2.4 ft.
2. Depth of the lagoon from top of bank to bottom soil surface (D) 11 ft. 12.4 ft.
3. Slope = Horizontal/vertical side slope (S) 3 2.8
4. Length at the top of inside bank (L) 457 ft. 204.0 ft.
5. Width at top inside slope (W) 229 ft. 317.0 ft.
6. Length at midpoint of sludge layer Lrt,= L-2S(D-(T/2)) 398.5 ft. 141.3 ft.
7. Width at midpoint of sludge layer Wm=W-2S(D-(T/2)) 170.5 ft. 254.3 ft.
8. Volume of sludge (Vs) Vs=Lm Wm T 169,860 ft3 86,219 ft3
9. Volume in gallons: Vsg=V*7.5 gal./ft3. 1,273,950 gal. 646,644 gal.
10. Thickness of existing liquid tmt. zone (Y) 3.5 ft 6.0 ft
11. Thickness of total treatment zone (Z) Z=T+Y 6 ft 8.4 ft
12. Length at midpoint of total tmt. zone LZ= L-2(S)(D-(Z/2) 409 ft. 158.1 ft.
13. Width at midpoint of total tmt. Zone WZ =W-2(S)(D-(Z/2) 181 ft. 271.1 ft.
14. Volume of total treatment zone (Vz) Vz = Lz Wz Z 444,174 ft3 359,960 ft3
15. Ratio ( R) of sludge layer volume to total Treatment Volume
R=Vs/Vz 0.38 0.24
If the ratio R exceeds 0.50, than a sludge Plan of Action may be required. Check with DWQ for information
on filing the Plan of Action.
Note: If the lagoon has a designed sludge storage volume (DSSV), subtract that volume from both the volume
of sludge (Vs) (Item 8) and from the volume of total treatment zone (Vz) (Item 14), and take the ratio.
Then, R= (Vs-DSSV)/ (Vz - DSSV)
Example: If DSSV =85,000 ft3, then R= (169,860 -85,000)/ (444,174 -85,000) = 84,860/ 359,174 = 0.24.
16. Design sludge storage volume (DSSV) 85,000 0
17. Ratio (R)of sludge layer volume to treatment volume adjusted
.24
for designed sludge storage volume 0.24 v