Loading...
HomeMy WebLinkAboutSW3140402_Soils Report_20140501c- Construction Materials Engineering & Consulting, PC NC Engineering License # C-3512 - SC COA # 4239 "Bringing EFFECTIVE EFFICIENCY to Your Project" June 30, 2014 Mr. Wallace Kyle Groves Blue Heel Group 128 E. Hargett Street Suite 204 Raleigh, NC 27601 RE: Groundwater Monitoring Wyndmoor Dear Mr. Groves: Construction Materials Engineering & Consulting, PC (CMEC) has conducted the ground water monitoring of two (2) hand auger locations within the proposed sand filter area on June 13, 2014. The location of the test pits are shown below. The sand filter shown was moved based on results of the ground water testing provided on June 17, 2014. 1 0 'om r \ \O � veo m O Ov \ Cnsn o" 4401 Shopton Road, Charlotte, NC 28217 0 Office: (704) 323-7734 0 Fax: (704) 665-5619 0 www.emecnc.com Hand Auger 41 was located near a drainage feature. The Hand Auger is on the bank of the drainage feature. The existing ground elevation is 639.7. The bottom of the test pit is approximated at 8 feet. CMEC returned 3 days after the initial hand augers. At this time, water was measured 43 inches below existing ground. The' approximate elevation of the water was 636.12. Hand Auger #2 was located between trees labeled 342 and 370. The existing ground elevation is 638.3. The bottom of the test pit is approximated at 7 feet. CMEC returned 3 days after the initial hand augers. At this time, water was measured 75 inches below existing ground. The approximate elevation of the water was 632.05. The elevations provided are based on relative grades by Phoenix Land Surveying. CMEC believes the water elevation in the boring holes represent the watertable forthis area. There is an existing drainage feature which could impact future groundwater elevations. Therefore, the sand filter was adjusted away and slightly up gradient as shown in the above image. If you should have any questions, please call me at your convenience 704-361-8104. Sincerely, Construction Materials Engineering & Consulting, PC James P. Magennis, PE President 4401 Shopton Road, Charlotte, NC 28217 6 Office: (704) 323-7734 0 Fax: (704) 665-5619 0 www.cmecnc.com