HomeMy WebLinkAboutGW1-2023-00935_Well Construction - GW1_20230120 WELL CONSTRUCTION RECORD(GW-1) For Internal Use Only: t" r
1.Well Contractor Information:
JOHNNY BURR 14.WATER ZONES . '
FROM TO DESCRIPTION
Well Contractor Name ft. ft.A - 3098
ft. ft.
NC Well Contractor Certification Number 15.OUTER CASING for mu1H-cased wells OR LINER if a licable
GEOLOGIC EXPLORATION FROM TO DIAMETER THICKNESS MATERIAL
ft. f[. in.
Company Name
16.INNER CASING OR TUBING(geothermal closed-loop)
2.Well Construction Permit#: FROM TO DIAMETER THICKNESS MATERIAL
List all applicable well construction permits(i.e.UIC,County,State,Variance,etc.) 0.0 ft. 30.0 ft- 2.0 " SCH 40 PVC
3.Well Use(check well use): ft. ft. in.
Water Supply Well: 17.SCREEN
FROM TO DIAMETER SLOT SIZE THICKNESS MATERIAL
❑Agricultural ❑Municipal/Public 30.0 ft' 40.0 ft' 2.0 '"' .010 SCH 40 PVC
❑Geothermal(Heating/Cooling Supply) ❑Residential Water Supply(single) ft. ft. i"•
01ndustrial/Commercial ❑Residential Water Supply(shared) 18.GROUT
❑Irrl atlon ❑Wells>100,000 GPD FROM TO MATERIAL EMPLACEMENT METHOD&AMOUNT
Non-Water Supply Well: 0.0 ft' 26.0 ft. PORTLANDBENTONITE SLURRY
OMonitoring []Recovery
Injection Well:
ft. ft.
❑Aquifer Recharge ❑Groundwater Remediation
19.SAND/GRAVEL PACK if applicable)
❑Aquifer Storage and Recovery ❑Salinity Barrier FROM TO MATERIAL EMPLACEMENT METHOD
❑Aquifer Test ❑StormwaterDrainage 28.0 ft- 40.0 ft. 20-40 FINE SILICA SAND
❑Experimental Technology ❑Subsidence Control ft. ft.
❑Geothermal(Closed Loop) ❑Tracer 20.DRILLING LOG attach additional sheets if necessary)
❑Geothermal(Heating/Cooling Return) ❑Other(explain under 921 Remarks) FROM TO DESCRIPTION color,hardness,soil/rack type,ginin size,etc.
0.0 ft. 25.0 ft. CONCRETE
4.Date Well(s)Completed: 12�08�22 Well ID# MW-B13-325 25.0 ft. 40.0 ft' TAN SILTY CLAY
ft. ft.
Sa.Well Location:
COPES - VULCAN ft. ft.
Facility/Owner Name Facility ID#(if applicable) ft. ft. '
601 WEST SUMMIT AVENUE CHARLOTTE 28203 ft. ft.
Physical Address,City,and Zip ft. ft.
M EC KLE N B U RG 21.REMARKS
County Parcel Identification No.(PIN) BENTONITE SEAL-26.0-28.0 FEET
5b.Latitude and longitude in degrees/minutes/seconds or decimal degrees:
(if well field,one hit/long is sufficient) 22.Certification:
350 13' 17.12" N 800 51' 50.23" W � 12/28/22
6.Is(are)the well(s): EPermanent or ❑Temporary Signature of Certified Well Contractor Date
By signing this form,I hereby certify that the well(s)was(were)constructed in accordance with
7.Is this a repair to an existing well: ❑Yes or ONo 15A NCAC 02C.0100 or 15A NCAC 02C.0200 Well Construction Standards and that a copy
If this is a repair,fill out known well construction information and explain the nature of the of this record has been provided to the well owner.
repair under#21 remarks section or on the back of this form.
23.Site diagram or additional well details:
8.For Geoprobe/DPT or Closed-Loop Geothermal Wells having the same You may use the back of this page to provide additional well construction info
construction,only I GW-I is needed. Indicate TOTAL NUMBER of wells (add'See Over'in Remarks Box).You may also attach additional pages if necessary.
drilled: 24.SUBMITTAL INSTRUCTIONS
9.Total well depth below land surface: 40.0 (ft.)
For multiple wells list all depths ifdierent(exantple-3 t@r 200'and 2@100') Submit this GW-1 within 30 days of well completion per the following:
28.0 24a. For All Wells: Original form to Division of Water Resources (DWR),
10.Static water level below top of casing: (ft*) Information Processing Unit,1617 MSC,Raleigh,NC 27699-1617
If water level is above casing,use"+"
11.Borehole diameter: 8.0 (in,) 24b.For Injection Wells: Copy to DWR,Underground Injection Control(IUC)
Program,1636 MSC,Raleigh,NC 27699-1636
12.Well construction method: AUGER
24c.For Water Supply and Open-Loop Geothermal Return Wells:Copy to the
(i.e.auger,rotary,cable,direct push,etc.) county environmental health department of the county where installed
FOR WATER SUPPLY WELLS ONLY: 24d.For Water Wells producing over 100,000 GPD: Copy to DWR,CCPCUA
Permit Program,1611 MSC,Raleigh,NC 27699-1611
13a.Yield(gpm) Method of test:
13b.Disinfection type: Amount:
Form GW-I North Carolina Department of Environmental Quality-Division of Water Resources Revised 6-6-2018