20200294 Ver 2_[External] Carpenter Square-DWR Project #20-0294 & AID #SAW-2013-00078_20220517

CAUTION: External email. Do not click links or open attachments unless you verify. Send all suspicious email as an attachment to Report Spam. <mailto:[e-mail]>

Colleen,

I had a client and project engineer contact me about a project that was permitted back in 2020. When they completed their “As-builts” for the project, they noticed a discrepancy in
the riparian buffer impacts. The change in the impacts per the project engineer are due to a construction staking issue where the site was staked out approximately 4’ to the west of
where it was designed. The discrepancies are shown on the attached submitted impact exhibits with the redlines to denote the changes (increase or decrease) in each impact area. We
have also provided the As-built Impact maps based on the surveyors clearing limits and site shift.

The riparian buffer discrepancy net totals are the following:

Zone 1- net increase 318 SF (Impact Areas #1, 2, 5)

Zone 2 - net decrease 30 sf (Impact Areas #1, 2, 3, 5)

I have also included James Lastinger and attached the 404 Nationwide Permit. The staking shift decreased the overall wetland impacts by the amount denoted below:

Wetlands - decreased by 178 sf (Impact Area #1)

Please let us know if this notification of the change in impact amounts is sufficient or if something additional is required by the NCDWR or USACE.

Thank you,

DEBORAH E. SHIRLEY

Project Manager-Regulatory Specialist

Soil & Environmental Consultants, PA

North Quarter Office Park

8412 Falls of Neuse Road, Suite 104

Raleigh, NC 27615

Office [phone]

Direct [phone]

Mobile [phone]

[e-mail] <mailto:[e-mail]>

Visit us at sandec.com <https://urldefense.com/v3/__http://www.sandec.com/__;!!HYmSToo!axsIs3SLgUHXB-jY-Q_FjrxSAzZeTEGEucmSyQlBVPY46dCglpZteT5U-avtKQ_e26u4AxqlMhF-2sabzRb1YQ$>

This electronic communication, including all attachments, is intended only for the named addressee (s) and may contain confidential information. This electronic communication may not
have passed through our standard review/quality control process. Design data and recommendations included herein are provided as a matter of convenience and should not be used for final
design. Rely only on final, hardcopy materials bearing the consultant's original signature and seal. If you are not the named addressee (s), any use, dissemination, distribution or copying
of this communication is prohibited. If you have received this electronic communication in error, please notify the sender by return e-mail and delete the original communication from
your system. Thank you.

P Please consider the environment before printing this email.