WI0100175_Regional Office Physical File Scan Up To 9/22/2022

RESIDENTIAL
WELL CONSTRUCTION RECORD
O-
<��
North Carolina Department of Environment and Natural Resources- Division of Water Quality
WELL CONTRACTOR CERTIFICATION # 3421
1. WELL CONTRACTOR:
David Stratton
Well Contractor (Individual) Name
AWD Services. Inc.
Well Contractor Company Name
258 North Turkev Creek Rd.
Street Address
Leicester NC 28748
City or Town State Zip Code
( 828 ) 683-9223
Area code Phone number
2. WELL INFORMATION:
WELL CONSTRUCTION PERMIT# W10100175
OTHER ASSOCIATED PERMIT#(if applicable)
SITE WELL ID #(if applicable)
3. WELL USE (Check Applicable Box): Residential Water Supply ❑
DATE DRILLED 10/21 /1 1
TIME COMPLETED AM ❑ PM
4. WELL LOCATION:
CITY: Mars Hill .. COUNTY Madison
2314 Hambura Road
(Street Name, Numbers, Community, Subdivision, Lot No., Parcel, Zip Code)
TOPOGRAPHIC / LAND SETTING: (check appropriate box)
VSlope ❑Valley ❑Flat ❑Ridge ❑Other Elev.
LATITUDE 35 48 38.0000 "'DMS OR DID
LONGITUDE 82 25 41.0000 " DMS OR DD
Latitude/longitude source: R�PS acpographic map
(location of well must be shown on a USGS topo map andattached to
this form if not using GPS)
5. WELL OWNER
Donna Cox Rusch
Owner Name
2314 Hambura Road
Street Address
Mars Hill NC 28754
City or Town State Zip Code
8( 28 U
Area code Phone number
6. WELL DETAILS: (5) Geothermal Bores
a. TOTAL DEPTH: 300'
b. DOES WELL REPLACE EXISTING WELL? YES ❑ NO ❑
C. WATER LEVEL Below Top of Casing: N/A FT.
(Use "+" if Above Top of Casing)
d. TOP OF CASING IS N/A FT. Above Land Surface'
"Top of casing terminated at/or below land surface may require
a variance in accordance with 15A NCAC 2C .0118.
e. YIELD (gpm): N/A METHOD OF TEST N/A
f. DISINFECTION: Type N/A _ Amount N/A
g. WATER ZONES (depth):
Top
Bottom
Top Bottom
Top
Bottom
Top Bottom
Top
Bottom
Top Bottom
Thickness/
7. CASING:
Depth
Diameter Weight Material
Top
Bottom
Ft.
Top
Bottom
Ft.
Top
Bottom
Ft.
8. GROUT:
Depth
Material Method
Top 0
Bottom 20'
Ft.
Bentonite Pour
Top 21'
Bottom 300'
Ft.
Pea Gravel
Top
Bottom
Ft.
.
9. SCREEN:
Depth
Diameter
Slot Size Material
Top
Bottom
Ft.
in. in.
Top
Bottom
Ft.
in. in.
Top
Bottom
Ft.
in. in.
10. SAND/GRAVEL PACK:
Depth
Size Material
Top
Bottom
Ft.
Top
Bottom
Ft.
Top
Bottom
Ft.
11. DRILLING LOG
Top Bottom Formation Description.
/
/
/
QSI
/ r
/ '(
/4a S V�
12. REMARKS: 2ti ?to
80G
Soil: �tatm ntRIQ'
I DO HEREBY CERTIFY THAT THIS WELL WAS CONSTRUCTED IN
ACCORDANCE WITH 15A NCAC 2C, WELL CONSTRUCTION
STANDARDS, AND THAT A COPY OF THIS RECORD HAS BEEN
PROVIDED TO THE WELL OWNER.
SIGNATURE OF CERTIFIED WELL LCONTRACTOR ; DATE
David Stratton
PRINTED NAME OF
-Submit within 30 days of completion to: Division of Water Quality - information
1617 Mail Service Center, Raleigh, NC 27699-161, Phone : [phone]
GUNSTRU,GTjNt2Tt,1E�>/,l!����yE
ssinqg, ( Form GW-1a
Rev. 2/09

North Carolina Department of Environment and Natural Resources
Beverly Eaves Perdue
Governor
Donna Cox Rusch
110 Concorde Pl.
Mandeville, LA 70471
Division of Water Quality
Coleen H. Sullins
Director
October 18, 2011
Ref: Issuance of Injection Well Permits WI0100175
Issued to Donna Cox Rusch
Mars Hill, Madison County, North Carolina
Dear Ms. Rusch:
Dee Freeman
Secretary
e~, [5Cr5VE 0
OCT 25 2N J
Asheville n 1e112- l O 'ICO
In accordance with the application received on October 5, 2011, I am forwarding permit number WI0100175 for the
construction and operation of a vertical closed -loop geothermal mixed -fluid heat pump injection well system to be
located at 2314 Hamburg Rd., Mars Hill, Madison County, NC 28754. This permit shall be effective from the date
of issuance until September 30, 2016, and shall be subject to the conditions and limitations stated therein, including
the requirement to install well identification tags as specified in Part 11.3 and to submit well construction
records as specified in Part VII.2. Be sure to read the entire permit to ensure that you are aware of all compliance
requirements of the permit.
You will need to notify this office at least 48 hours prior to beginning construction and operation of the injection
well system, In order to continue uninterrupted legal use of the injection facility for the stated purpose, you must
submit an application to renew the permit 120 days prior to its expiration date. This permit is not transferable to
any person without prior notice to and approval by the Director of the Division of Water Quality.
Please contact me at [phone] or michael.rogers(i�ncdenr.gov if you have any questions about your permit.
Best Regards,
LeIs
Michael Rogers, P.G. (NC & FL)
cc: k andon-Davidson;Ashe-villeLRegional Office. 1
WI0100175 Permit File
Madison County Environmental Health Department
Larry Wells, AWD Services Inc., P.O. Box 125, Leicester, NC 28748
AQUIFER PROTECTION SECTION
1636 Mail Service Center, Raleigh, North Carolina 27699-1636
Location: 2728 Capital Boulevard, Raleigh, North Carolina 27604
Phone: [phone] FAX 1: 919-715-0588; FAX 2: 919-715-60481 Customer Service: 1-877-623-6748
Internet: www.nmaterauality.ora
One
N©I hCaroli ia
An Equal Opporunny 1 Affirmative Action Ernobver

"I
10,167 "a Y i 00 M11"Q0
ENVIRONMENTAL MANAGEMENT COMMISSION
DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES
RALEIGH, NORTH CAROLINA
PERMIT FOR THE CONSTRUCTION AND OPERATION OF A WELL FOR INJECTION
In accordance with the provisions of Article 7, Chapter 87; Article 21; Chapter 143; and other applicable
Laws, Rules, and Regulations
PERMISSION IS HEREBY GRANTED TO
Donna Cox Rusch
FOR THE CONSTRUCTION AND OPERATION OF 5 TYPE 5QM INJECTION WELL(S), defined in Title
15A North Carolina Administrative Code 2C .0209(e)(3)(F), for the purpose of operating a vertical closed loop
geothermal mixed fluid heat pump system. This system is located at 2314 Hamburg Rd., Mars Hill, Madison
County, NC 28754, constructed and operated in accordance with the application received October 5, 2011, and
in conformity with the specifications and supporting data submitted, all of which are filed with the Department
of Environment and Natural Resources and are considered a part of this permit.
This permit is for Construction and Operation of an injection well and shall be in compliance with Title 15A of
the North Carolina Administrative Code 2C .0100 and .0200 plus any other applicable Laws, Rules, and
Regulations pertaining to well construction and use.
This permit shall be effective, unless revoked, from the date of its issuance until September 30, 2016, and shall
be subject to the specified conditions and limitations set forth in Parts I through IX hereof.
Permit issued this the 18th day of October, 2011.
oleen H. Sullins, Director
Division of Water Quality
By Authority of the Environmental Management Commission.
Permit #W10100175 UIC/5QM Page 1 of 5
ver. 03/2010

PART I - WELL CONSTRUCTION GENERAL CONDITIONS
1. The Permittee must comply with all conditions of this permit and with the standards and criteria specified
in Criteria and Standards Applicable to Injection Wells (15A NCAC 2C .0200). Any noncompliance with
conditions of this permit constitutes a violation of the North Carolina Well Construction Act and is
grounds for enforcement action as provided for in N.C.G.S. 87-94.
2. This permit shall become voidable unless the facility is constructed in accordance with the conditions of
this permit, the approved plans and specifications, and other supporting data.
3. Each injection well shall not hydraulically connect separate aquifers.
4. Each injection well shall not be located in an area generally subject to flooding. Areas that are generally
subject to flooding include those with concave slope, alluvial or colluvial soils, gullies, depressions, and
drainage ways.
5. Each injection well shall be afforded reasonable protection against damage during construction and use.
PART II — WELL CONSTRUCTION SPECIAL CONDITIONS
1. At least forty-eight (48) hours prior to constructing system, the Permittee shall notify the Aquifer
Protection Section's Underground Injection Control (UIC) Program Central Office staff, telephone
number 919 715-6166 and the Asheville Regional Office Aquifer Protection Section Staff, telephone
number 828-296-4500.
2. The location of each of the system manifolds shall be recorded by triangulation from three permanent
features on the site (e.g., building foundation corners) and shown on an updated Site Map. The Permittee
shall retain a copy of this record on site.
3. One well identification tag per grouping or `cluster' of wells shall be permanently affixed to the heating
and cooling unit or other nearby permanently fixed location in accordance with 15A NCAC 2C .0213 (g).
PART III — OPERATION AND USE GENERAL CONDITIONS
1. This permit is effective only with respect to the nature, volume of materials and rate of injection, as
described in the application and other supporting data.
2. This permit is not transferable without prior notice to, and approval by, the Director of the Division of
Water Quality (Director). In the event there is a desire for the facility to change ownership, or there is a
name change of the Permittee, a formal permit amendment request must be submitted to the Director,
including any supporting materials as may be appropriate, at least 30 days prior to the date of the change.
3. The issuance of this permit shall not relieve the Permittee of the responsibility of complying with any and
all statutes, rules, regulations, or ordinances, which may be imposed by other local, state, and federal
agencies, which have jurisdiction. Furthermore, the issuance of this permit does not imply that all
regulatory requirements have been met.
Permit #W10100175 UIC/5QM Page 2 of 5
ver. 03/2010

PARTJV-- PERFORMANCE STANDARDS
1. The injection_ facility shall be effectively maintained and operated at all times so that there is no
contamination of groundwater that will render it unsatisfactory for normal use. In the event that the
facility fails to perform satisfactorily, including the creation of nuisance conditions or failure- of the
injection zone to adequately assimilate the injected fluid, the Permittee shall take immediate corrective
actions including those actions that may be. required by the Division of Water Quality such as the repair,
modification, or abandonment of the injection facility.
2. The Permittee shall be required to comply with the terms and conditions of this permit even if compliance
requires a reduction or elimination of the permitted activity.
3. The issuance of this permit shall not relieve the Permittee of the responsibility for damages to surface or
ground water resulting from the operation of this facility.
PART V - OPERATION AND MAINTENANCE REQUIREMENTS
1. ) The injection facility shall be properly maintained and operated at all times.
2. The Permittee must notify the Division and receive prior written approval from the Director of any
planned physical alterations or additions in the permitted facility or activity not specifically authorized by
the permit.
3. At least forty-eight (48) hours prior to the initiation of the operation of the facility, for injection, the
Permittee must notify by telephone the Aquifer Protection Section's Underground Injection Control (UIC)
Program Central Office staff, telephone number 919 715-6166. Notification is required so that Division
staff can inspect or otherwise review the injection facility and determine if it is in compliance with permit
conditions.
PART VI - INSPECTIONS
1. Any duly authorized officer, employee, or representative of the Division of Water Quality may, upon
presentation of credentials, enter and 'inspect any property, premises, or place on or related to the injection
facility at any reasonable time for the purpose of determining compliance with this permit, may inspect or
copy any records that must be maintained under the terms and conditions of this permit, and may obtain
samples of groundwater, surface water, or injection fluids.
2. Division representatives shall have reasonable access for purposes of inspection, observation, and
sampling associated with injection and any related facilities as provided for in N.C.G.S. 87-90.
Provisions shall be made for collecting any necessary and appropriate samples associated with the
injection facility activities.
Permit #W10100175 UIC/5QM Page 3 of 5•
ver. 03/2010

PART VII — MONITORING AND REPORTING REQUIREMENTS
j 1. All required documentation shall be submitted to:
Aquifer Protection Section — UIC Program Aquifer Protection Section
DENR — Division of Water Quality Asheville Regional Office
1636 Mail Service Center and 2090 US Highway 70
Raleigh, NC 27699-1636 Swannanoa, NC.28778
Ph# 919-715-3221 828-296-4500
2. A completed Well Construction Record (Form GW-1) for each injection well must be submitted to the
Aquifer Protection Section Central Office and the Asheville Regional Office within 30 days of completion
of well construction. Copies of the GW-1 form(s) shall also be given to the Permittee and retained on site
to be made available for inspection.
3. A copy of the site map updated with manifold locations required in Part II.2 of this permit shall be
submitted to the Aquifer Protection Section Central Office and the Asheville Regional Office within 30
days of completion of well construction.
!4. Any monitoring (including groundwater, surface water, or soil sampling) deemed necessary by the
Division of Water Quality to insure surface and groundwater protection will be established and an
acceptable sampling reporting schedule shall be followed.
5. The Permittee shall report by telephone, within 48 hours of the occurrence or first knowledge of the
occurrence, to the Asheville Regional Office, telephone number 828-296-4500, any of the following:
(A) Any occurrence at the injection facility that results in any unusual operating circumstances;
(B) Any failure due to known or unknown reasons that renders the facility incapable of proper
injection operations, such as mechanical or electrical failures;
(C) Any loss of refrigerant in the system, regardless of the origin of the loss;
(D) Any recharging of the refrigerant system.
6. Where the Permittee becomes aware of an omission of any relevant facts in a permit application, or of any
incorrect information submitted in said application or in any report to the Director, the relevant and
correct facts or information shall be promptly submitted to the Director by the Permittee.
17. In the event that the permitted facility fails to perform satisfactorily, the Permittee shall take such
immediate action as may be required by the Director.
PART VIII — PERMIT RENEWAL,
In order to continue uninterrupted legal use of the injection facility for the stated purpose, the Permittee shall
submit an application to renew the permit 120 days prior to its expiration date.
I
Permit #W101001. 5 UIC/5QM Page 4 of 5
ver. 03/2010

PART IX — CHANGE OF WELL STATUS
1. The Permittee shall provide written notification within 15 days of any change of status of an injection
well. Such a change would include the discontinued use of a well for injection. If a well is taken
completely out of service temporarily, the Permittee must install a sanitary seal. If a well is not to be used
for any purpose, then that well must be permanently abandoned according to 15A NCAC 2C .0213(h)(1).
Notification shall be submitted to the addresses given in Part VII.1 of this permit.
2. When operations have ceased at the facility and a well will no longer be used for any purpose, the
- Permittee shall abandon that injection well in accordance with the procedures specified in 15A NCAC 2C
.0214, including but not limited to, the following:
(A) All casing and materials may be removed prior to -initiation of abandonment procedures if the
Director finds such removal will not be responsible for, or contribute to, the contamination of an
underground source of drinking water.
(B) The entire depth of each well shall be sounded before it is sealed to insure freedom from
obstructions that may interfere with sealing operations.
(C) .Each well shall be thoroughly disinfected, prior to sealing, if the Director determines that failure
to do so. could lead to the contamination of an underground source of drinking water.
(D) Each well shall be completely filled with cement grout, which shall be introduced into the well
through a pipe that extends to the bottom of the well and is raised as the well is filled.
(E) In the case of.gravel-packed wells in which the casing and screens have not been removed, the
casing shall be perforated opposite the gravel pack, at intervals not exceeding 10 feet, and grout
injected through the perforations.
(F) In those cases when, as a result of the injection operations, a- subsurface cavity has been created,
each well shall be abandoned in such a manner that will prevent the movement of fluids into or
between underground sources of drinking water and in accordance with the terms and conditions
of the permit.
(G) The Permittee shall submit a copy of the Well Abandonment Record (Form GW-30) as specified
in 15A NCAC 2C .0213(h)(1) within 30 days of completion of abandonment. Copies shall be
submitted to the addresses given in Part VII.1 of this permit.
Permit #W10100175 UIC/5QM Page 5 of 5
ver. 03/2010

00 �Zo 0
J-
L)
NORTH CAROLHqA
DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES.(NCDENR)
APPLICATION FOR PERMIT TO CONSTRUCT AND/OR USE A WELL(S) FOR
INJECTION WITH A GEOTEWRMAL HEAT PUMP SYSTEM FOR:
TYPE 50M WELDS)
New Permit Application OR Renewal (check one)
DATE. 'V\ , 20
PERWrNa (leave blank ifNEW permit application)
A. -PROPERTY OWNER(S)IAPPLICANT<S)
List each Property Owner listed on property deed (if owned by a business or government agency, state name of
entity and a representative w/authority for signature):
r
B4
I C.
(1) Mailing Address: \\6
city: State: \.-N Zip Code-
aomaomce Tete No.: t\% %Ls - ceuo..
EMAIL Address: j:S,
(2) - Physical Address of Site (if different than above): 4a3 \ \
';'� city: State: a'�� CoZip Code: !u/nItfy/rr sow
Home/Office Tele No.: Cell No.. ",%S - '-clQ, - c\k— 0 rZ-
EMAIL
S&M �,�, V*-. -\k, -
AUTHORIZED AGENT OF-OWNE14 IF ANY (if the Permit Applicant does not own the subject property,
attach a letter. from ihe property owner authorizing Ageht to install and operate-UIC well)
Company Name:
Contact Person: EMAIL Address:
Address:
City: State: _ Zip Code: -_ ----Counly:
Office Tele No.: Cell No,:
Website Address of Company, if any-........
STATUS OF APPLICANT
Private, _x Federal: Commercial:
State: Municipal: Native American Lands:
GPU/UIC 5QM Well Pennit Application (Revised 7/2008) Page I

0
F.
WELL DRILLER INFORMATION
Company Name-JAWD SMq= Inc.
WeU Drilling Contractor's Name: 1M Wells
NC Contractor Certification No.: 2603 Tj rr
C:)
e s7505�49@L3ellgg1W I&et C-.)
Contact person , _LaraLW�ells �Em�ailAddresy-W
Website: mom avuwelltirillin --com
Address: PO Box.125
City: Leicester NC zip Code: 28748 County: pop p be
Office Tele No.: _RMK:212_3 Cell No 828-215-2234
HEAT
FAT PUMP CONTRACTORINFORMTION (5,different than driffer)
Company Name
Contact Person
Address: 3 L V-1 ft., 38"
City: !Er.'J r'.g' Zip Code- A.11-0 County: & �4^4-0 v,
office Tele No.: 4 f, _6 Cell No
F. INJECTION PROCEDURE (briefly. dcwn be how the injection well(s) will be used)
4-4
G. WELL CONSTRUCTION DATA (81dy to Section H id thisisaPermit AL19MAT-)
(1) Proposed deft to be constructed: _wh _Roni
Sn _tt .@d Number of borings:
Approximate depth of each boring (fed): 3C)o
(2) Chemical additives to be used inclosed -loop system (only those eliemicals indicated have been approved):
R-22 X propyleneglycol ethanol other (other additives will
need prior. approval by. NCDENR before use)-
{3) Type of tubing to be used (eopper,.PVC, e%);
(4) Wen casing. is the well(s) eased? (checkeither(a.) YES or (b-) NO below)
(a) Y B S if yes, then provide casing informationsuch.as bp—e (steel, PVC, Plastic, ete),
degb, and extent of casing appearingabove ground:
(b), NO
(5) Grout (material surrounding well casing and/Or Piping):
(a) Grout type: Cement �Bentonite Other (specify)
(b) Grout depth of tubing (reference to land surface): from 0 to (feet)
if well has casing, indicate grout depth: from to
H. INJECTION -RELATED EQUIPMENT'
GOUMIC 5QM Well PanIft APPlicatiOn (Revised 7/2008) Page 2

Attach a diagram showing the engineering layout or proposed modification of the injection equipment and exterior
piping/tubingassociated with the injection operation. The manufacturer's brochure may provide supplementary
information.
LOCATION OIL WEI.L(S)
Attach two copies of traps showing the following.information:
(1) include a site map (can be drawn) showing: buildings, properViines, surface water bodies, potential sources
of groundwater contamination and the orientation of :and distances between the proposed well(s) and any
existing well(s) or waste _disposal facilities such as septic tanks or drain. fields located within 1000 feet of thC
geothermal heat pump well system. Label all features clearly and include a norn
rth arrow.
TI C-,
(2) Include a topographic map of the area extending one mile from the property boundaries and CD
indicate the facility's Iocation and the map name. =,
J. POTABLE WATER WELL(S)
Are there any potable water well(s) on the subject property or adjacent properties? YES X NO
If Yes, than indicate location on attached map(s).
K. CERTIFICATION
Note: This Permit Application must.be signed by eachperson appearing on the recorded legal.properly deed.
"I hereby certify, under penalty of law, that I have personally examined and am familiar with the information
submitted in this document and all attachments thereto and that; based on my inquiry of those individuals
immediately. responsible for obtaining:said information, I believe that: the. information is true, accurate and complete.
I am aware that there are significant penalties, including the possibility of fines and imprisonment, for submitting
false -information. t agree to construct, operate, maintain; .repair, and: if applicable, abandonthe injection well and
all related appurtenances in accords ` . the approved specifications and conditions of the Permit."
Signature of Property Owner/Applicant
Print or Type Full Name
Signature of Property Owner/Applicant
Print or Type Full Name
Signature of Authorized Agent, if any
Print or Type Full ]Name
Please return two copies of completed. Application package to:
North Carolina DENR-DWQ`
Aquifer Protection Section
UIC Program
1636 MailBervice Center
R-qfeiih NG 2-7Gy'.9., I6.3b
GPU/UIC SQM Well. Permit Application {Revised 7/2008) CG i �� t !� 6 y 3� Page 3

hcUCi�Iti; r' L NR / MVQ
AQUIFFR,PpnTFf'.Tlt: )id fiFC T ION
OCT i 0
ww
111 --
— .
too[�4
SITE PLAN
N Scale: 1 •-20'-0'
M.L ELLVATION • "W
THE PAPER 6 ORIENTED TRUE NORTH
LL OEVATDN - roar
W= MUW or M.L ROOR1O 11
7° OFF MAGNETIC NORTH
DETU NINED ON 6NE 1Y OWNOI AND ARCHIM
• If ANY SURVEY WORK O DONE THE WW=R O 10
EEAVE A AMD! STAKE Af THE PRODOSED IOWEA ROOK
.
. .... EENATON. L STAKEs"99 EEKY rocwzoTTNE SCAM,
- .... ......... .
Ol DCOWATION. THIS STAKESTO 1905E 1000NIMM
TM V = WCAWN OETNE NOUSE W-WNG MM LAYQW
TIE SURVEYOR B TOCOMACTIM APZKMCT TO
COORDDUDETOS WORK
EYT
M. a
V",-
I a vrUtt I

4F B T T
r
HCDEHR
North Carolina Department of Environment and Natural Resources
Division of Water Quality
Beverly Eaves Perdue Coleen H, Sullins
Governor Director
October 11, 2011
Donna Cox Rusch
110 Concorde Place
Mandeville, LA 70471
Dear Ms. Rusch:
Dee Freeman
Secretary
Subject: Acknowledgement of
Application No. WI0100175
Donna Cox Rusch SFR
Injection Mixed Fluid GSBP
Well (5QM) System
Madison County
The Aquifer Protection Section acknowledges receipt of your permit application and supporting
documentation received on October 5, 2011. Your application package has been assigned the number
listed above, and the primary reviewer is Michael Rogers.
Central and Asheville Regional Office staff will perform a detailed review of the provided
application, and may contact you with a request for additional information. To ensure maximum
efficiency in processing permit applications, the Aquifer Protection Section requests your assistance in
providing a timely and complete response to any additional information requests.
Please note that processing standard review permit applications may take as long as 60 to 90 days
after receipt of a complete application. If you have any questions, please contact
Michael Rogers at [phone] or [e-mail].
Sincerely, .
for Debra J.
Groundwater Protection Unit Supervisor
cc: Asheville Regional Office, Aquifer Protection Section
Larry Wells — AWD Services, Inc.
Brad Stickels - Stickels Service Co., Inc.
Permit File WI0100175
AQUIFER PROTECTION SECTION
1636 Mail Service Center, Raleigh, North Carolina 27699-1636
Location: 2728 Capital Boulevard. Raleigh, North Carolina 27604
Phone: [phone] FAX 1: 919-715-0588; FAX 2: 919-715-60481 Customer Service:1-877-623-6748
Internet: www.ncwateroualitv.om
An Equal Opportunity � Affirmative Action Employer
One
NorthCarolilia

o
4-o
�i
cY

Driving Directions from 2090 Us 70 Hwy, Swannanoa, North Carolina 28778 to [1-399] Hambur... ' Page 1 of 2
Notes
mapgvest
Trip to:
[1-399] Hamburg Rd
Mars Hill, NC 28754
32.97 miles
43 minutes
N
2090 Us 70 Hwy
Miles Per
;Miles
Swannanoa, NC 28778-8211
;Section
;Driven
1. Start out going west on US-70 toward New Salem Rd.
Go 2.4 Mi
2.4 mi
41
2. Turn left onto Porter Cove Rd.
Go 0.1 Mi
2.5 mi
Porter Cove Rd is just past Burleson Rd
If you reach Moffitt Branch Rd you've gone a little too far
3. Merge onto I-40 W toward I-26 /Asheville.
Go 2.0 Mi
4.5 mi
4. Merge onto 1-240 W via EXIT 53B toward Asheville.
Go 5.5 Mi
10.0 mi
(ice
83
5. Merge onto US-23 N / US-19 N via EXIT 4A toward Woodfin / Weaverville.
Go 18.2 Mi
: 28.2 mi
_
6. Take the US-19 N / US-23-A N exit, EXIT 9, toward Burnsville / Spruce
Go 0.3 Mi
28.5 mi
Pine.
U9�
7. Turn right onto US-19 / US-23. Continue to follow US-1 9.
If reach 1-26 W about 0.2 miles too far
Go 1.8 Mi
i 30.3 mi
you you've gone
8. Turn right onto Old Mill Bridge Rd.
' Go 0.08 Mi
' 90.4 mi
Old Mill Bridge Rd is 0.2 miles past Lower Bailey Branch Rd
If you reach Upper Baileys Branch Rd you've gone about 0.2 miles too far
41
9. Take the 1 st left onto Old Mill Rd.
0.2 far
Go 0.7 Mi
i 31.1 mi
If you reach US-49 you've gone about miles too
10. Turn left onto Walker Branch Rd.
Go 1.5 Mi
i 32.6 mi
11. Turn right onto Paint Fork Rd.
Go 0.2 Mi
32.7 mi
http://www.mapquest.com/print?a7--app.core.f6bbf87le0lbleeObf3 la8db
10/17/2011

g t'ving Directions from 2090 Us 70 Hwy, Swannanoa, North Carolina 28778 to [1-399] Hambur... Page 2 of 2
12. Turn left onto NC-1533. Go 0.02 Mi 32.7 mi
13. NC-1533 becomes Hamburg Rd. Go 0.2 Mi ; 33.0 mi
■ 14. [1-399] HAMBURG RD. 33.0 mi
If you reach the end of Millstone Cove Rd you've gone about 0.7 miles too far
[1-399] Hamburg Rd 33.0 mi ' 33.0 mi
" Mars Hill, NC 28754
Total Travel Estimate: 32.97 miles - about 43 minutes
©2011 MapQuest, Inc. Use of directions and maps is subject to the MapQuest Terms of Use. We make no guarantee of the accuracy of their content, road
conditions or route usability. You assume all risk of use. View Terms of Use
http://www.mapquest.com/print?a7--app.core.f6bbf87le0lbleeObf3 la8db 10/17/2011