GW1-2022-06336_Well Construction - GW1_20220705

WELL CONSTRUCTION RECORD(GW-1) For Internal Use Only:
1.Well Contractor Information:
Chris C Russell 14.WATER ZONES
Well Contractor Name FROM TO DESCRIPTION
3254 A 10 ft. 305 fr.
ft. ft.
NC Well Contractor Certification Number Inc. 15.OUTER CASING for multi-cased wells OR LINER if a licable)
Russell Well Drilling, c FROM TO DIAMETER THICKNESS MATERIAL
0 ft- 180 ft 6.25 1n SDR21 JPvc
Company Name
16.INNER CASING OR TUBING(geothermal closed-loop)
2.Well Construction Permit#: 939 FROM TO DIAMETER THICKNESS MATERIAL
List all applicable well construction permits(i.e.UIC County,State,Variance,etc) ft. ft. In.
3.Well Use(check well use): ft. ft. in.
17.
Water Supply Well: FROM SCREENTO DIAMETER SLOT SIZE THICKNESS MATERIAL
DAgricultuml ❑Municipal/Public ft. ft.
❑Geothermal(Heating/Cooling Supply) 12Residential Water Supply(single) ft. ft. in
❑hidustrial/Commercial ❑Residential Water Supply(shared) 18.GROUT
❑hTi ation ❑Wells>100,000 GPD FROM TO MATERIAL EMPLACEMENT METHOD&AMOUNT
Non-Water Supply Well: 0 ft. 20 ft. Grout Poured
❑Monitoring ❑Recovery ft. ft.
Injection Well:
ft. ft.
❑Aquifer Recharge ❑Groundwater Remediation
19.SAND/GRAVEL PACK if applicable)
❑Aquifer Storage and Recovery El Salinity Barrier FROM TO MATERIAL EMPLACEMENT METHOD
❑Aquifer Test ❑Stormwater Drainage ft. ft.
❑Experimental Technology ❑Subsidence Control ft. ft.
❑Geothermal(Closed Loop) ❑Tracer 20.DRILLING LOG(attach additional sheets if necessary)
❑Geothermal(Heating/Cooling Return) ❑Other(explain under#21 Remarks) FROM TO DESCRIPTION(color,hardness,soil/rock t e rain size,etc.
0 ft. 75 ft. Dirt
4.Date Well(s)Completed: 6-9-2022 Well ID# 75 ft 305 ft Rock
Sa Well Location: ft. ft.
David Nichols ft. ft.
Facility/Owner Name Facility ID#(if applicable) ft. ft. J U L
3685 Rocky Rd, Lenoir, NC 28645 ft. ft.
Physical Address,City,and Zip ft. ft.
Caldwell 21.REMARKS
County Parcel Identification No.(PIN)
5b.Latitude and longitude in degrees/minutes/seconds or decimal degrees:
(ifwell field,one lat/long is sufficient) 22.C tifieation•
35' 53.515' N 37'. 524' W - 6/27/2022
v�
6.Is(are)the well(s): ®Permanent or ❑Temporary Sig-n-NTGre of Certified Well C ntractor Date
By signing this fonn,I hereby certify that the well(s)was(were)constructed in accordance with
7.Is this a repair to an existing well: ❑Yes or ONo 15A NCAC 02C.0100 or 15A NCAC 02C.0200 Well Construction Standards and that a copy
If this is a repair,fill out known well construction information and explain the nature of the of this record has been provided to the well owner.
repair under#21 remarks section or on the back of this form.
23.Site diagram or additional well details:
8.For Geoprobe/DPT or Closed-Loop Geothermal Wells having the same You may use the back of this page to provide additional well construction info
construction,only 1 GW-1 is needed. Indicate TOTAL NUMBER of wells (add'See Over'in Remarks Box).You may also attach additional pages if necessary.
drilled: 24.SUBMITTAL INSTRUCTIONS
9.Total well depth below land surface: 305 (ft) Submit this GW-1 within 30 days of well completion per the following:
For multiple wells list all depths if dierent(example-3@200'and 2@I00)
10.Static water level below top of casing: 10 (ft) 24a. For All Wells: Original form to Division of Water Resources (DWR),
Ifwater level is above casing,use"+^ Information Processing Unit,1617 MSC,Raleigh,NC 27699-1617
11.Borehole diameter: 6.25 (in.) 24b.For Injection Wells: Copy to DWR,Underground Injection Control(IUC)
Program,1636 MSC,Raleigh,NC 27699-1636
12.Well construction method: Air Drilled
24c.For Water Supply and Open-Loop Geothermal Return Wells:Copy to the
(i.e.auger,rotary,cable,direct push,etc.) county environmental health department of the county where installed
FOR WATER SUPPLY WELLS ONLY: 24d.For Water Wells producing over 100,000 GPD: Copy to DWR,CCPCUA.
13a.Yield(gpm) 30 Method of test:Ai r
Permit Program,1611 MSC,Raleigh,NC 27699-1611
13b.Disinfection type: HTH Amount: 1 Cup
Form GW-1 North Carolina Department of Environmental Quality-Division of Water Resources Revised 6-6-2018