Loading...
HomeMy WebLinkAboutNCG020441_2022 DMR_20220414NCDEQ Division of Energy, Mineral and Land Resources Stormwater Discharge Monitoring Report (DMR) Form for NCG020000 Active and Inactive Mining Sites Click here for instructions Complete, sign, scan and submit the DMR via the Stormwater NPDES Permit Data Monitoring Report (DMR) Upload form. Mail the original, signed hard copy of the DMR to the appropriate DEMLR Regional Office. Certificate of Coverage No. NCG02 D441 Person Collecting Samples: Facility Name: Vulcan - South Fork Quarry Laboratory Name: Facility County: Forsyth County Laboratory Cert. No.: Discharge during this period: ❑ Yes ❑■ No (if no, skip to signature and date) Has yourfacility implemented mandatory Tier response actions this sample period for any benchmark exceedances? ❑ Yes )r❑ No If so, wh ch Tier (I, II, or Ill)? A copy of this DMR has been uploaded electronically via httr)s://edocs.deg.nc.gov/Forms/SW-DMR ■❑ Yes ❑ No Date Uploaded: 4/14/2022 Analytical Monitoring Requirements for Outfalls with Industrial Activities — Benchmarks in (Red) Parameter parameter Outfall 001 Outfall Outfall Outfall Outfall Code N/A Receiving Stream Class N/A Date Sample Collected MM/DD/YYYY 46529 24-Hour Rainfall in inches 00545 Settleable Solids (5S) (0.1 mg/1) C0530 TSS in mg/L (100 or 50*) 00070 Turbidity of discharge" - Turbidity downstream of discharge** - Turbidity upstream of discharge** Additional parameters for outfalls in drainage areas that use >55 gallons per month of new hydraulic oil on average Estimated New Motor/Hydraulic Oil NCOIL Usage in al/month 00552 Non -Polar Oil & Grease in mg/L (15) Additional parameters for Clay Mines Aluminum, total in mg/L (0.75 FW, 01105 0.24 SW) Zinc, total (as Zn) in mg/L (0.126 FW, 01092 0.095 SW) 00951 Fluoride, total in mg/L (6.0) 00900 Hardness, total pH, in standard units (6.0-9.0 FW, 00400 6.8-8.5 SW) Antimony, total in mg/L (0.34 FW, 01097 N/A SW) Arsenic, total in mg/L (0.15 FW, 0.069 01002 SW) Chromium III in mg/L (0.905 FW, N/A C0034 SW) Additional parameters for Feldspar Ore Mines Aluminum, total in mg/L (0.75 FW, 01105 0.24 5W) Zinc, total (as Zn) in mg/L (0.126 FW, 01092 0.095 SW) 00951 Fluoride, total in mg/L (6.0) Additional parameters for Lithium Ore Mines 01105 Aluminum, total in mg/L (0.75 FW, 0.24 SW) 00951 Fluoride, total in mg/L (6.0) Additional parameters for Phosphate Mines 00951 Fluoride, total in mg/L (6.0) 39344 Alpha, Gross Particle Activity Additional parameters for Industrial Sand Mines 00951 Fluoride, total in mg/L (6.0) C00334 Chromium Ill in mg/L (0.905 FW, N/A SW) 39344 Alpha, Gross Particle Activity * Outfalls to Outstanding Resource Waters (ORW), High Quality Waters (HQW), Trout Waters (Tr) and Primary Nursery Areas (PNA) have a benchmark TSS limit of 50 mg/L All other water classifications have a benchmark of 100 mg/L ** See F-5 of the NCG020000 General Permit for turbidity requirements. FW (Freshwater) SW (Saltwater) Notes (optional): Quarter 1 "I certify by my signature below, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or those persons directly respons ble for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete , am aware that there are significant pena.ties for submitting false information, including the possibility of fines and imprisonment for knowing violations." Signature of Perm itte or a ed Authorized Individual johnsonto@vmcmail.com Email Address 4/14/2022 Date 704-547-7076 Phone Number