SW6211202_Plansheet - Misc. Detail_20220223

Innovative Solar 48, LLC
22400 Andrew Jackson Hwy (US-74 Alt)
Maxton, NC 28364
Robeson County
SOLAR PANEL AND RACKING SYSTEM DETAILS
1. Typical Solar Panel Detail
The project fixed tilt Solar PV system complies with NCDEQ Stormwater Design Manual Section E-6 Solar Farms.
• Recommendation 2: Disconnect runoff from solar panel arrays (DL Ratio = 85% >_ 80%);
>See calcualtions with Figure 1 dimensions: Solar Panel Width = 12.94 ft, Row Spacing: 11 ft; Average Slope = 1%
• Recommendation 6: Limit vertical clearance to <_ 10 feet (per below, max. vertical height is 6 ft — 7 % in). This
detail is provided to show vertical height clearances and module install configuration. See Detail #2 for typical
racking support design.
T GAt W SOLAR NODULE
INSTALLED IN PORTRAIT PO mm
TYPICAL TWO IN A ROW
FAS RACK BY LEGRAND
s 1PV SOLAR RACKING DETAILS
L-1 NTs
2. Typical GM -I Single Post Portrait Detail
Per Ground Mount System Model GM-1 Assemby Instructions Manual (Page 3, RBI Solar www.rbisolar.com)
Module Dimensions: 76.93 x 38.7x1.57 inches (Quartech Max Power CS6X-310/315/320P; Canadian Solar, Inc.)
MODULE 1 MECHANICAL DATA
SINGLE POST Specification Data
Cell Type Poly -crystalline, 6 inch
PORTRAIT Cell Arrangement 72 (6 x 12)
Dimensions 1954x982x40mm(76.93x38.7x1.57in)