NC0020664_Renewal Application_20180130 (2)

NPDES DOCUMENT SCANNING COVER SLEET
NC0020664
Spindale WWTP
NPDES Permit:
Document Type:
Permit Issuance
Wasteload Allocation
Authorization to Construct (AtC)
Permit Modification
Complete File - Historical
Engineering Alternatives (EAA)
Renewal Application 3
_. _.
Instream Assessment (67b)
Speculative Limits
Environmental Assessment (EA)
Document Date:
January 30, 2018
This document is printed on reuse paper - ignore any
content on the reirerse wide

Water Resources
ENVIRONMENTAL QUALITY
January 30, 2018
Scott Webber, Town Manager
Town of Spindale
327 Ecology St
Spindale, NC 28160
Subject: Permit Renewal
Application No. NC0020664
Spindale WWTP
Rutherford County
Dear Applicant:
ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
LINDA CULPEPPFR
interim Direcior
The Water Quality Permitting Section acknowledges the January 30, 2018 receipt of your permit renewal application and
supporting documentation. Your application will be assigned to a permit writer within the Section's NPDES WW
permitting branch. Per G.S. 150E-3 your current permit does not expire until permit decision on the application is made.
Continuation of the current permit is contingent on timely and sufficient application for renewal of the current permit.
The permit writer will contact you if additional information is required to complete your permit renewal. Please respond
in a timely manner to requests for additional information necessary to allow a complete review of the application and
renewal of the permit.
Information regarding the status of your renewal application can be found online using the Department of Environmental
Quality's Environmental Application Tracker at:
https://deq.nc.gov/permits-regulations/permit-guidance/environmental-application-tracker
If you have any additional questions about the permit, please contact the primary reviewer of the application using the
links available within the Application Tracker.
Sincerely,
3(feb,, a fe\-icl
Wren Thedford
Administrative Assistant
Water Quality Permitting Section
cc: Central Files w/application(ARO)
ec: WQPS Laserfiche File w/application
State of North Carolina I Environmental Quality I Water Resources
1617 Mail Service Center I Raleigh, North Carolina 27699-1617
919-807-6300

NG I N EERI NG
163 Heritage Lane, Bostic, NC 28018 • 828.245.4080 office • 828.223.2265 mobile • 828.245.2189 fax
January 26, 2018
Ms. Julie Grzyb
Supervisor
NC Department of Environmental Quality
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
RE: NPDES Permit Renewal, Permit NC0020664
Spindale WWTP, Rutherford County
Facility Class IV
Dear Ms. Grzyb:
RECEIVED/DENR/DWR
JAN 30 2018
Water Resources
Permitting Section
The purpose of this letter is to submit an NPDES permit renewal application for the Town of Spindale,
NC. Currently, we are in the process of completing a major rehab of the Town's existing wastewater
treatment plant. These upgrades are targeted at eliminating systemic permit violations and are
scheduled to be complete by the end of 2018.
SDG Engineering was only recently asked to assist with preparing the NDPES permit renewal
application and has not had time to fully vet all available data. Therefore, much of the data included
in the attached application is from the 2013 renewal submission. All aspects of the renewal
application will be submitted by Tuesday, March 6, 2018. If you should have any questions in the
meantime, please contact me at [phone] or Kurt Wright at [phone].
Very truly yours,
Dean A. Sawyer, PE, AWAM
Project Engineer
SDG Engineering
CC: Scott Webber, Town Manager, Town of Spindale
Kim Tessneer, WWTP Supervisor, Town of Spindale
Kurt Wright, SDG Engineering

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
FORM
2A
NPDES
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
NPDES FORM 2A APPLICATION OVERVIEW
APPLICATION OVERVIEW
Form 2A has been developed in a modular format and consists of a "Basic Application Information" packet
and a "Supplemental Application Information" packet. The Basic Application Information packet is divided
into two parts. All applicants must complete Parts A and C. Applicants with a design flow greater than or
equal to 0.1 mgd must also complete Part B. Some applicants must also complete the Supplemental
Application Information packet. The following items explain which parts of Form 2A you must complete.
BASIC APPLICATION INFORMATION:
A. Basic Application Information for all Applicants. All applicants must complete questions A.1 through A.8. A treatment works
that discharges effluent to surface waters of the United States must also answer questions A.9 through A.12.
B. Additional Application Information for Applicants with a Design Flow >_ 0.1 mgd. All treatment works that have design flows
greater than or equal to 0.1 million gallons per day must complete questions B.1 through B.6.
C. Certification. All applicants must complete Part C (Certification).
SUPPLEMENTAL APPLICATION INFORMATION:
D. Expanded Effluent Testing Data. A treatment works that discharges effluent to surface waters of the United States and meets
one or more of the following criteria must complete Part D (Expanded Effluent Testing Data):
1. Has a design flow rate greater than or equal to 1mgd,
2. Is required to have a pretreatment program (or has one in place), or
3. Is otherwise required by the permitting authority to provide the information.
E. Toxicity Testing Data. A treatment works that meets one or more of the following criteria must complete Part E (Toxicity Testing
Data):
1. Has a design flow rate greater than or equal to 1 mgd,
2. Is required to have a pretreatment program (or has one in place), or
3. Is otherwise required by the permitting authority to submit results of toxicity testing.
F. Industrial User Discharges and RCRA/CERCLA Wastes. A treatment works that accepts process wastewater from any
significant industrial users (Sills) or receives RCRA or CERCLA wastes must complete Part F (Industrial User Discharges
and RCRA/CERCLA Wastes). SIUs are defined as:
1. All industrial users subject to Categorical Pretreatment Standards under 40 Code of Federal Regulations (CFR) 403.6 and
40 CFR Chapter I, Subchapter N (see instructions); and
2. Any other industrial user that:
a. Discharges an average of 25,000 gallons per day or more of process wastewater to the treatment works (with certain
exclusions); or
b. Contributes a process wastestream that makes up 5 percent or more of the average dry weather hydraulic or organic
capacity of the treatment plant; or
c. Is designated as an SIU by the control authority.
G. Combined Sewer Systems. A treatment works that has a combined sewer system must complete Part G (Combined Sewer
Systems).
ALL APPLICANTS MUST COMPLETE PART C (CERTIFICATION)
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 1 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
BASIC APPLICATION INFORMATION
PART A. BASIC APPLICATION INFORMATION FOR ALL APPLICANTS:
All treatment works must complete questions A.1 through A.8 of this Basic Application Information Packet.
A.1. Facility Information.
Facility Name Spindale Wastewater Treatment Plant
Mailing Address P. O. Box 186
Spindale, NC 28160
Contact Person Kim Tessneer
Title Superintendent
Telephone Number [phone]
Facility Address Ecology St.
(not P.O. Box) Spindale, NC 28160
A.2. Applicant Information. If the applicant is different from the above, provide the following:
Applicant Name
Mailing Address
Contact Person
Title
Telephone Number ( )
Is the applicant the owner or operator (or both) of the treatment works?
® owner ® operator
Indicate whether correspondence regarding this permit should be directed to the facility or the applicant.
® facility 0 applicant
A.3. Existing Environmental Permits. Provide the permit number of any existing environmental permits that have been issued to the treatment works
(include state -issued permits).
NPDES NC0020644 PSD
UIC Other W00001953 (Biosolids)
RCRA Other
A.4. Collection System Information. Provide information on municipalities and areas served by the facility. Provide the name and population of each
entity and, if known, provide information on the type of collection system (combined vs. separate) and its ownership (municipal, private, etc.).
Name Population Served Type of Collection System Ownership
Town of Spindale 4.,248 Separate Municipal
Total population served 4,248
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 2 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0O20644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
A.S. Indian Country.
a. Is the treatment works located in Indian Country?
❑ Yes ❑x No
b. Does the treatment works discharge to a receiving water that is either in Indian Country or that is upstream from (and eventually flows
through) Indian Country?
❑ Yes ® No
A.6. Flow. Indicate the design flow rate of the treatment plant (i.e., the wastewater flow rate that the plant was built to handle). Also provide the
average daily flow rate and maximum daily flow rate for each of the k Tie period
with the 121" month of this year" occurring no more than three month
a. Design flow rate 6.0 MGD
b. Annual average daily flow rate (MGD)
c. Maximum daily flow rate (MGD)
Data from 2013 renewal
This data will be updated by March 6th
Two Years Ago (2005)
1.240
4.600
Last Year (2006)
1.126
4.900
This Year (2007)
0.749
3.900
A.7. Collection System. Indicate the type(s) of collection system(s) used by the treatment plant. Check all that apply. Also estimate the percent
contribution (by miles) of each.
© Separate sanitary sewer 100
O Combined storm and sanitary sewer
A.S. Discharges and Other Disposal Methods.
a. Does the treatment works discharge effluent to waters of the U.S.? ® Yes 0 No
If yes, list how many of each of the following types of discharge points the treatment works uses:
i. Discharges of treated effluent
ii. Discharges of untreated or partially treated effluent
iii. Combined sewer overflow points
iv. Constructed emergency overflows (prior to the headworks)
v. Other
b. Does the treatment works discharge effluent to basins, ponds, or other surface impoundments
that do not have outlets for discharge to waters of the U.S.? 0 Yes
If yes, provide the following for each surface impoundment:
Location:
1
0 No
Annual average daily volume discharge to surface impoundment(s) mgd
Is discharge 0 continuous or ❑ intermittent?
c. Does the treatment works land -apply treated wastewater? ❑ Yes ❑k" No
If yes, provide the following for each land application site:
Location:
Number of acres:
Annual average daily volume applied to site: mgd
Is land application 0 continuous or 0 intermittent?
d. Does the treatment works discharge or transport treated or untreated wastewater to another
treatment works? 0 Yes x❑ No
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 3 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
If yes, describe the mean(s) by which the wastewater from the treatment works is discharged or transported to the other treatment works
(e.g., tank truck, pipe).
If transport is by a party other than the applicant, provide:
Transporter Name
Mailing Address
Contact Person
Title
Telephone Number ( )
For each treatment works that receives this discharge, provide the following:
Name
Mailing Address
Contact Person
Title
Telephone Number ( )
If known, provide the NPDES permit number of the treatment works that receives this discharge
Provide the average daily flow rate from the treatment works into the receiving facility. mgd
e. Does the treatment works discharge or dispose of its wastewater in a manner not included
in A.8. through A.8.d above (e.g., underground percolation, well injection):
If yes, provide the following for each disposal method:
Description of method (including location and size of site(s) if applicable):
❑Yes ®No
Annual daily volume disposed by this method:
Is disposal through this method ❑ continuous or ❑ intermittent?
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 4 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
WASTEWATER DISCHARGES:
If you answered "Yes" to question A.8.a, complete questions A.9 through A.12 once for each outfall (including bypass points) through
which effluent is discharged. Do not include information on combined sewer overflows in this section. If you answered "No" to question
A.8.a, go to Part B, "Additional Application Information for Applicants with a Design Flow Greater than or Equal to 0.1 mgd."
A.9. Description of Outfall.
a. Outfall number 001
b. Location Spindale
(City or town, if applicable)
Rutherford
28160
(Zip Code)
NC
(County)
35' 22' 52"
(State)
81'53'18"
(Latitude)
c. Distance from shore (if applicable)
d. Depth below surface (if applicable)
e. Average daily flow rate
f. Does this outfall have either an intermittent or a periodic di
If yes, provide the following information:
Number f times per year discharge occurs:
Average duration of each discharge:
Average flow per discharge:
Months in which discharge occurs:
g. Is outfall equipped with a diffuser?
(Longitude)
ft.
'/ of the 36" Dia. pipe is submerged
0.798
mgd
Data from 2013 renewal
This data will be updated by March 6th
mgd
❑ Yes ❑ No
A.10. Description of Receiving Waters.
a. Name of receiving water Cathevs Creek
b. Name of watershed (if known) Broad Sub -basin 03-08-02
ft.
United States Soil Conservation Service 14-digit watershed code (if known):
c. Name of State Management/River Basin (if known):
United States Geological Survey 8-digit hydrologic cataloging unit code (if known):
d. Critical low flow of receiving stream (if applicable)
acute cfs chronic cfs
e. Total hardness of receiving stream at critical low flow (if applicable): mg/I of CaCO3
EPA Form 3510-2A (Rev. 1-99). Replaces EPA fors 7550-6 & 7550-22. Page 5 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
A.11. Description of Treatment
a. What level of treatment are provided? Check all that apply.
❑ Primary ❑x Secondary
❑ Advanced 0 Other. Describe:
b. Indicate the following removal rates (as applicable):
Design BOD5 removal or Design CBOD5 removal 85%
Design SS removal 85% %
Design P removal N/A %
Design N removal N/A
Other
c. What type of disinfection is used for the effluent from this outfall? If disinfection varies by season, please describe:
Chlorination
If disinfection is by chlorination is dechlorination used for this outfall? ❑x Yes ❑ No
Does the treatment plant have post aeration? C Yes 0 No
A.12. Effluent Testing Information. All Applicants that discharge to waters of the US must provide effluent testing data for the following
parameters. Provide the indicated effluent testing required by the permitting authority for each outfall through which effluent is
discharged. Do not include information on combined sewer overflows in this section. All information reported must be based on data
collected through analysis conducted using 40 CFR Part 136 methods. In addition, this data must comply with QA/QC requirements of
40 CFR Part 136 and other appropriate QA/QC requirements for standard methods for analytes not addressed by 40 CFR Part 136. At a
' ' ' "' . ' .. '
minimum, effluent testing data must be based c
Outfall number: co",
Data from 2013 renewal
This data will be by March 6th
me -half years apart.
updated
PARAMETER
MAXIMUM DAILY VALUE
AVERAGE DAILY VALUE
Value
Units
Value
Units
Number of Samples
pH (Minimum)
7.71
s.u.
pH (Maximum)
8.17
s.u.
Flow Rate
3.900
MGD
0.749
MGD
12 months DMR
Temperature (Winter)
9.4
°C
12.4
'C
12 months DMR
Temperature (Summer)
28.3
'C
25.4
'C
12 months DMR
' For pH please report a minimum and a maximum daily value
POLLUTANT
MAXIMUM DAILY
DISCHARGE
AVERAGE DAILY DISCHARGE
ANALYTICAL
METHOD
MLIMDL
Conc.
Units
Conc.
Units
Number of
Samples
CONVENTIONAL AND NON CONVENTIONAL COMPOUNDS
BIOCHEMICAL OXYGEN
DEMAND (Report one)
BOD5
48.0
mg/L
6.51
mg/L
1034
CBOD5
FECAL COLIFORM
360
#1100 ML
34.19
#/100 ML
1034
TOTAL SUSPENDED SOLIDS (TSS)
51.2
mg/L
12.73
mg/L
1034
REFER TO
END OF PART A.
THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 6 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020664
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
BASIC APPLICATION INFORMATION
PART B. ADDITIONAL APPLICATION INFORMATION FOR APPLICANTS WITH A DESIGN FLOW GREATER THAN OR
EQUAL TO 0.1 MGD (100,000 gallons per day).
All applicants with a design flow rate >_ 0.1 mgd must answer questions B.1 through B.6. All others go to Part C (Certification).
B.1. Inflow and Infiltration. Estimate the average number of gallons per day
200,000 gpd
that flow into the treatment works from inflow and/or infiltration.
Briefly explain any steps underway or planned to minimize inflow and infiltration.
Smoke Testing and follow up
B.2. Topographic Map.
map must show the outline
area.)
a. The area surrounding
b. The major pipes
treated wastewa
c. Each well where
d. Wells, springs, o
works, and 2) lis
e. Any areas where
f. If the treatment works
or special pipe, show
B.3. Process Flow Diagram
backup power sources
chlorination and dechlorination).
rates between treatment
B.4. Operation/Maintenance
Are any operational
contractor?
If yes, list the name,
pages if necessary).
Name:
Mailing Address:
Telephone Number:
Responsibilities of Contractor:
B.5. Scheduled improvements
uncompleted plans for
treatment works has
for each. (If none, go
a. List the outfall
Attach to this application a topographic map of the area extending
of the facility and the following information. (You may submit
the treatment plant, including all unit processes.
or other structures through which wastewater enters the treatmen
at least one mile beyond facility property boundaries. This
more than one map if one map does not show the entire
works and the pipes or other structures through which
pass piping, if applicable.
.hin % mile of the property boundaries of the treatment
or disposed.
Conservation and Recovery Act (RCRA) by truck, rail,
works and where it is treated, stored, and/or disposed.
the treatment plant, including all bypass piping and all
all treatment units, including disinfection (e.g.,
at influent and discharge points and approximate daily flow
quality) of the treatment works the responsibility of a
the contractor's responsibilities (attach additional
RECEIVED/DENRIDWR
Items B.2 and B.3 will be submitted by
March 6, 2018
eu in puuuc, rewru ui uurerwrse nnuwn to Lire apprrc.dnt.
the sewage sludge produced by the treatment works is stored, treated,
receives waste that is classified as hazardous under the Resource
on the map where the hazardous waste enters the treatment
or Schematic. Provide a diagram showing the processes of
or redundancy in the system. Also provide a water balance showing
The water balance must show daily average flow rates
units. Include a brief narrative description of the diagram.
Performed by Contractor(s).
or maintenance aspects (related to wastewater treatment and effluent
0 Yes ® No
address, telephone number, and status of each contractor and describe
JAN 30 2018
( )
Water Resources
Permitting Section
and Schedules of Implementation. Provide information on any uncompleted
improvements that will affect the wastewater treatment, effluent quality, or design
several different implementation schedules or is planning several improvements, submit
to question B.6.)
number (assigned in question A.9) for each outfall that is covered by this implementation
implementation schedule or
capacity of the treatment works. If the
separate responses to question B.5
schedule.
001 Rehabilitation of existing treatment system and to resolve systemic NOVs.
b. Indicate whether the planned improvements or implementation schedule are required by local, State, or Federal agencies.
❑ Yes 0 No
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 7 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020664
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
c. If the answer to B.5.b is "Yes," briefly describe, including new maximum daily inflow rate (if applicable).
d. Provide dates imposed by any compliance schedule or any actual dates of completion for the implementation steps listed below, as
applicable. For improvements planned independently of local, State, or Federal agencies, indicate planned or actual completion dates, as
applicable. Indicate dates as accurately as possible.
Schedule Actual Completion
Implementation Stage MM/DD/YYYY MM/DD/YYYY
- Begin Construction 10/27/2016 10/27/2016
- End Construction 03/11/2018 Ongoing/ /
- Begin Discharge Continuous/ / / /
- Attain Operational Level 05/13/2018 / /
e. Have appropriate permits/clearances conceming other Federal/State requirements been obtained? 0 Yes 0 No
Describe briefly: NC DEC) Authorization to Construct
B.6. EFFLUENT TESTING DATA (GREATER THAN 0.1 MGD ONLY).
Applicants that discharge to waters of the US must provide effluent testing data for the following parameters. Provide the indicated
effluent testing required by the permitting authority for each outfall through which effluent is discharged. Do not include information
on combine sewer overflows in this section. All information reported must be based on data collected through analysis conducted
using 40 CFR Part 136 methods. In addition, this data must comply with QA/QC requirements of 40 CFR Part 136 and other appropriate
QA/QC requirements for standard methods for analytes not addressed by 40 CFR Part 136. At a minimum effluent testing data must be
based on at least three pollutant scans and must be
Out -fall Number: 001
Data from 2013 renewal
This data will be updated by March 6th
POLLUTANT
MAXIMUM DAILY
DISCHARGE
AVERAGE DAILY DISCHARGE
ANALYTICAL
METHOD
MLJMDL
Conc.
Units
Conc.
Units
Number of
Samples
CONVENTIONAL AND NON CONVENTIONAL COMPOUNDS
AMMONIA (as N)
4.85
mg/L
0.45
mg/L
15'
CHLORINE (TOTAL
RESIDUAL, TRC)
28.0
ug/L
9.53
ug/L
151
DISSOLVED OXYGEN
9.96
mg/L
8.08
mg/L
15'
TOTAL KJELDAHL
NITROGEN (TKN)
4.76
mg/L
3.23
mg/L
32
NITRATE PLUS NITRITE
NITROGEN
4.0
mg/L
3.17
mg/L
32
OIL and GREASE
<5.0
mg/L
0.0
mg/L
32
PHOSPHORUS (Total)
4.70
mg/L
1.79
mg/L
15'
TOTAL DISSOLVED SOLIDS
(TDS)
1,710
mg/L
930
mg/L
15'
END OF PART B.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
'Based on Twelve (12) months of DMR data and three (3) SCANs. Copies of the SCANS are attached.
2 Based only on the three (3) SCANs.
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 8 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale VWVTP, NC0020664
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
BASIC APPLICATION INFORMATION
PART C. CERTIFICATION
All applicants must complete the Certification Section. Refer to instructions to determine who is an officer for the purposes of this
certification. All applicants must complete all applicable sections of Form 2A, as explained in the Application Overview. Indicate below which
parts of Form 2A you have completed and are submitting. By signing this certification statement, applicants confirm that they have reviewed
Form 2A and have completed all sections that apply to the facility for which this application is submitted.
Indicate which parts of Form 2A you have completed and are submitting:
0 Basic Application Information packet Supplemental Application Information packet:
Ei Part D (Expanded Effluent Testing Data)
® Part E (Toxicity Testing: Biomonitoring Data)
® Part F (Industrial User Discharges and RCRAICERCLA Wastes)
0 Part G (Combined Sewer Systems)
ALL APPLICANTS MUST COMPLETE THE FOLLOWING CERTIFICATION.
I certify under penalty of law that this document
designed to assure that qualified personnel properly
manage the system or those persons directly responsible
accurate, and complete. I am aware that there
for knowing violations.
Name and official title Scott W
and all attachments were prepared under my direction or supervision in accordance with a system
gather and evaluate the information submitted. Based on my inquiry of the person or persons who
for gathering the information, the information is, to the best of my knowledge and belief, true,
are significant penalties for submitting false information, including the possibility of fine and imprisonment
bber
Signature
j'
'� i
cGV
Telephone number f828) 286-2541
Date signed January 25, 2018
Upon request of the permitting authority, you must submit any other information necessary to assure wastewater treatment practices at the treatment
works or identify appropriate permitting requirements.
SEND COMPLETED FORMS TO:
NCDENR/ DWQ
Attn: NPDES Unit
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
EPA Fomi 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 10 of 29

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
SUPPLEMENTAL APPLICATION INFORMATION
PART D. EXPANDED EFFLUENT TESTING DATA
Refer to the directions on the cover page to determine whether this section applies to the treatment works.
Effluent Testing: 1.0 mgd and Pretreatment Works. If the treatment works has a design flow greater than or equal to 1.0 mgd or it has (or is required
to have) a pretreatment program, or is otherwise required by the permitting authority to provide the data, then provide effluent testing data for the following
pollutants. Provide the indicated effluent testing information and any other information required by the permitting authority for each outfall through which
effluent is discharged. Do not include information on combined sewer overflows in this section. All information reported must be based on data collected
through analyses conducted using 40 CFR Part 136 methods. In addition, these data must comply with QA/QC requirements of 40 CFR Part 136 and
other appropriate QA/QC requirements for standard methods for analytes not addressed by 40 CFR Part 136. Indicate in the blank rows provided below
any data you may have on pollutants not specifically listed in his form. At a minimum, effluent testing data must be based on at least three pollutant
scans and must be no more than four and one-half years old.
Outfall number. 001 (Complete once
Data from 2013 renewal
This data will be updated by March 6th
5 )
POLLUTANT
MAXIMUM DAILY DISCHARGE
AVERAGE DAILY DISCHARGE
ANALYTICAL
METHOD
ML/MDL
Conc.
Units
Mass
Units
Conc.
Units
Mass
Units
Number
of
Samples
METALS (TOTAL RECOVERABLE), CYANIDE, PHENOLS, AND HARDNESS.
ANTIMONY
158
ug/L
5.14
#/day
69.3
uglL
0.43
#Iday
3
EPA 200.7
50
ARSENIC
<5.0
ug/L
<0.16
#/day
0.0
uglL
0.0
#!day
151
EPA 200.7
5
BERYLLIUM
<1.0
ug/L
<0.03
#Iday
<1.0
ug/L
<0.01
#Iday
3
EPA 200.7
1
CADMIUM
<2.0
ug/L
<0.07
#/day
0.0
ug/L
0.0
#Iday
151
EPA 200.7
2
CHROMIUM
7.0
ug/L
0.23
#/day
1.25
ug/L
0.008
#Iday
15'
EPA 200.7
5
COPPER
130
ug/L
4.23
#/day
52.47
ug/L
0.33
#Iday
15'
EPA 200.7
5
LEAD
<5.0
ug/L
<0.16
#Iday
0.0
ug/L
0.0
#/day
15'
EPA 200.7
5
MERCURY
13.0
ng/L
0.0004
#/day
6.47
ng/L
0.00008
#/day
122
EPA 245.1
0.2
NICKEL
191
ug/L
6.21
#/day
50
ug/L
0.31
#!day
15'
EPA 200.7
5
SELENIUM
4.0
ug/L
0.13
#/day
0.23
ug/L
0.001
#Iday
151
EPA 200.7
5
SILVER
<5.0
ug/L
<0.16
#Iday
0.0
ug/L
0.0
#/day
151
EPA 200.7
5
THALLIUM
<5.0
ug/L
<0.16
#Iday
<5.0
ugiL
<0.03
#Iday
3
EPA 200.7
5
ZINC
117
ug/L
3.81
#Iday
73.74
ug/L
0.46
#Iday
151
EPA 200.7
10
CYANIDE
<5.0
ug/L
<0.16
#!day
<5.0
ug/L
<0.03
#!day
3
SM 4500 CN E
5
TOTAL PHENOLIC
COMPOUNDS
<5.0
ug/L
<0.16
#/day
<5.0
ug/L
<0.03
#Iday
3
EPA 420.1
5
HARDNESS (as CaCO3)
40
mg/L
243.2
#Iday
32.5
mg/L
203.0
#Iday
15'
SM 2340 C
1
' Based on data contained in the last 12 months DMRs and 3 SCAN5.
2 Based on results reported in the 12 DMRs, Mercury results from the 3 SCANs were not used.
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 10 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
Outfall number: 001 (Complete once for each outfall discharging effluent to waters of the United States.)
MAXIMUM DAILY DISCHARGE
POLLUTANT
Conc.
Units
Mass
Units
AVERAGE DAILY DISCHARGE
Conc.
Units
Mass
Units
Number
of
Samples
ANALYTICAL
METHOD
MLIMDL
Notes regarding the data entered in Part D.
1. In accordance with instructions from DENR, the Mass loading for "Maximum Daily Discharge" is
calculated based on using (a) the maximum value of the three pollutant scans and (b) the maximum daily
flow experienced during the last 12 months (which is 3.90 MGD). This is a hypothetical case. The
occasion for which the wastewater treatment plant would have a discharge wherein both of these values
occurred at the same time is not probable.
2. Mass loading for average daily discharge is based on the average daily flow for the last 12 months of 0.749
MGD.
3. Values for ACROLEIN, ACRYLONITRILE and 2-CHLOROETHYLVINYL ETHER were not reported by
the laboratory for the 1/3/07 sample. The laboratory stated they can go back to their records and retrieve
this data if necessary, however, they believe due to the results of the 1/3/07 SCAN and the other two
SCANS the values for these parameters will more than likely be BQL.
4. The laboratory did not report a value for 3,4 BENZO-FLUORANTHENE. When the laboratory was
contacted regarding this they indicated it might be the same as BENZO(b)FLUORANTHENE for which a
value of BQL was reported in all three (3) SCANs. (A complete copy of all three SCANs is attached.) Due
to the fact that the laboratory was not positive that these two constituents are one in the same the BQL was
not entered in Part D for 3,4 BENZO-FLUORANTHENE. If DENR requires additional information from
the Town of Spindale regarding 3,4 BENZO-FLUORANTHENE, please contact Kurt Wright, PE at
828.245.4080.
5. Some constituents tested in the samples have different names for the same substance. In some cases the
name utilized by the laboratory was different than the name used by EPA in Part D of the NPDES renewal
application. The constituents for which this circumstance occurred are listed in the table below.
Name Used in NPDES Application
Form - Part D
Name Used by Research & Analytical
Laboratories, Inc.
Lab # 37701
Chlorodibromomethane
Dibromochloromethane
Dichlorobromomethane
Bromodichloromethane
Trans-1,2-Dichloroethylene
Trans-1,2-Dichloroethene
1,1-Dichloroethylene
1,1-Dichloroethene
1,3-Dichloropropylene
Cis 1,3-Dichloropropene
Methyl Chloride
Chloromethane
Methyl Bromide
Bromomethane
Tetrachloroethylene
Tetrachloroethene
Trichlomethylene
Trichloroethene
P-Chloro-M-Cresol
4-Chloro-3-Methylphenol
4,6-Dinitro-O-Cresol
2-Methyl-4,6-Dinitrophenol
Total Phenolic Compounds
Phenols
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 11 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
Outfall number: 001 (Complete once for each outfall discharging effluent to waters of the United States.)
MAXIMUM DAILY DISCHARGE
AVERAGE DAILY DISCHARGE
ANALYTICAL
METHOD
MUMDL
POLLUTANT
Conc.
Units
Mass
Units
Conc.
Units
Mass
Units
Number
of
Samples
VOLATILE ORGANIC COMPOUNDS
Data from 2013 renewal
EPA624
0.100
ACROLEIN
<0.100
mg/L
<3.25
This data will be updated by March 6th
ACRYLONITRILE
<0.10o
mg/L
<3.25
#/day
<0.100
mg/L
<0.63
#/day
2'
EPA 624
0.100
BENZENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
BROMOFORM
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
CARBON
TETRACHLORIDE
<0.010
mg/L
<0.33
#Iday
<0.010
mglL
<0.06
#/day
3
EPA 624
0.010
CHLOROBENZENE
<0.010
mg/L
<0.33
#!day
<0.010
mglL
<0.06
#/day
3
EPA 624
0.010
CHLORODIBROMO-
METHANE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 624
0.010
CHLOROETHANE
<0.010
mg/L
<0.33
#Iday
<0.010
mglL
<0.06
#Iday
3
EPA 624
0.010
2-CHLOROETHYLVINYL
ETHER
<0.010
mglL
<0.33
#/day
<0.o10
mg/L
<0.06
#!day
21
EPA 624
0.010
CHLOROFORM
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#!day
3
EPA 624
0.010
DICHLOROBROMO-
METHANE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 624
0.010
1,1-DICHLOROETHANE
<0.010
mg/L
<0.33
#Iday
<0.o10
mglL
<0.06
#Iday
3
EPA 624
0.010
1,2-DICHLOROETHANE
<0.010
mg/L
<0.33
#/day
<0.o10
mglL
<0.06
#/day
3
EPA 624
0.010
TRANS-I,2-DICHLORO-
ETHYLENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 624
0.010
1,1-DICHLORO-
ETHYLENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA624
0.010
1,2-DICHLOROPROPANE
<0.010
mg/L
<0.33
#/clay
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
1,3-DICHLORO-
PROPYLENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
ETHYLBENZENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
METHYL BROMIDE
<0.a10
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
METHYL CHLORIDE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
METHYLENE CHLORIDE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
1,1,2,2-TETRA-
CHLOROETHANE
<o.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
TETRACHLORO-
ETHYLENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 624
0.010
TOLUENE
<o.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 624
0.010
1 Results for these constituents were not reported by the laboratory for the 1/3/07 sample. The laboratory stated they can go back to their records and retrieve this
data if necessary. Due to the results of the 1/3/07 SCAN and the other two SCANS the labora ory believes the values for these parameters will more than likely be
BQL.
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 12 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
Outfall number: 001 (Complete once for each outfall discharging effluent to waters of the United States.)
POLLUTANT
MAXIMUM DAILY DISCHARGE
AVERAGE DAILY DISCHARGE
ANALYTICAL
METHOD
MLIMDL
Conc.
Units
Mass
Units
Conc.
Units
Mass
Units
Number
of
Samples
1
TRICHLOROETHANE
<0.010
mg/L
<
Data from 2013 renewal
This data will be updated by March 6th
EPA 624
0.010
„2-
TRICHLOROETHANE
<0.010
mg/L
a
EPA 624
0.010
<.
TRICHLOROETHYLENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
VINYL CHLORIDE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 624
0.010
Use this space (or a separate sheet) to provide information on other volatile organic compounds requested by the permit writer
ACID -EXTRACTABLE COMPOUNDS
P-CHLORO-M-CRESOL
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
2-CHLOROPHENOL
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
2,4-DICHLOROPHENOL
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
2,4-DIMETHYLPHENOL
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
4,6-DINITRO-O-CRESOL
<0.050
mg/L
<1.63
#Iday
<o.oso
mg/L
<0.31
#/day
3
EPA 625
0.050
2,4-DINITROPHENOL
<0.050
mg/L
<1.63
#Iday
<0.050
mg/L
<0.31
#/day
3
EPA 625
0.050
2-NITROPHENOL
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
4-NITROPHENOL
<0.05o
mg/L
<1.63
#Iday
<0.050
mg/L
<0.31
#/day
3
EPA 625
0.050
PENTACHLOROPHENOL
<0.050
mg/L
<1.63
#Iday
<0.050
mg/L
<0.31
#Iday
3
EPA 625
0.050
PHENOL
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
2,4.6-
TRICHLOROPHENOL
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
Use this space (or a separate sheet) to provide information on other acid -extractable compounds reques ed by the permit writer
BASE -NEUTRAL COMPOUNDS
ACENAPHTHENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
ACENAPHTHYLENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
ANTHRACENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
BENZIDINE
<0.050
mg/L
<1.63
#Iday
<0.050
mg/L
<0.31
#Iday
3
EPA 625
0.050
BENZO(A)ANTHRACENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
BENZO(A)PYRENE
<0.010
mg/L
<0.33
#/day
<o.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 13 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
Outfall number: 001 (Complete once for each outfall discharging effluent to waters of the United States.)
POLLUTANT
MAXIMUM DAILY DISCHARGE
AVERAGE DAILY DISCHARGE
ANALYTICAL
METHOD
ML1MDL
Conc.
Units
Mass
Units
Conc.
Units
Mass
Units
Number
of
Samples
3,4 BENZO-
FLUORANTHENE
?'
mg!L
?1
Data from 2013 renewal
<0.010
mglL
<0.33
This data will be updated by March 6th
EPA 625
0.010
BENZO(GHI)PERYLENE
BENZO(K)
FLUORANTHENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
BIS (2-CHLOROETHOXY)
METHANE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
BIS (2-CHLOROETHYL)-
ETHER
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
BIS (2-CHLOROISO-
PROPYL) ETHER
<0.010
mg/L
<0.33
#Iday
<0.010
mglL
<0.06
#Iday
3
EPA 625
0.010
BIS (2-ETHYLHEXYL)
PHTHALATE
<0.010
mg1L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
4-BROMOPHENYL
PHENYL ETHER
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
BUTYL BENZYL
PHTHALATE
<0.010
mg1L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
2-CHLORO-
NAPHTHALENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
4-CHLORPHENYL
PHENYL ETHER
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
CHRYSENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
DI-N-BUTYL PHTHALATE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
DI-N-OCTYL PHTHALATE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
DIBENZO(A,H)
ANTHRACENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
1,2-DICHLOROBENZENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
1,3-DICHLOROBENZENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
1,4-DICHLOROBENZENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
3,3-DICHLORO-
BENZIDINE
<0.020
mg/L
<0.65
#Iday
<0.020
mg/L
<0.13
#Iday
3
EPA 625
0.020
DIETHYL PHTHALATE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
DIMETHYL PHTHALATE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
2,4-DINITROTOLUENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
2,6-DINITROTOLUENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Iday
3
EPA 625
0.010
1,2-DIPHENYL-
HYDRAZINE
<0.050
mg/L
<1.63
#/day
<0.050
mg/L
<0.31
#Iday
3
EPA 625
0.050
' The laboratory did not report a value for 3,4 BENZO-FLUORANTHENE. When the laboratory was contacted regarding this they indicated it might be the same as
BENZO(b)FLUORANTHENE for which a value of BQL was reported in all hree (3) SCANs. (A complete copy of a I three SCANs is attached.) Due to the fact that the
laboratory was not positive that these two constituents are one in the same BQL was not entered in Part D for 3,4 BENZO-FLUORANTHENE. If DENR requires
additional information from the Town of Spindale for 3,4 BENZO-FLUORANTHENE, please contact Kurt Wright, PE at 828.245.4080.
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 14 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
Outfall number. 001 (Complete once for each outfall discharging effluent to waters of the United States.)
POLLUTANT
MAXIMUM DAILY DISCHARGE
AVERAGE DAILY DISCHARGE
ANALYTICAL
METHOD
MLIMDL
Conc.
Units
Mass
Units
Conc.
Units
Mass
Units
Number
of
Samp es
FLUORANTHENE
<0.010
mglL
<C
Data
from 2013
renewal
EPA 625
0.010
<0.010
mg/L
«
This
data will be
updated
by
March
6th
EPA 625
0.010
FLUORENE
HEXACHLOROBENZENE
<0.010
mg/L
<0.33
#Iday
<0.010
mg/L
<0.06
#Jday
3
EPA 625
0.010
HEXACHLORO-
BUTADIENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#Jday
3
EPA 625
0.010
HEXACHLOROCYCLO-
PENTADIENE
<0.010
mg/L
<0.33
#/day
<0.010
mgfL
<0.06
#/day
3
EPA 625
0.010
HEXACHLOROETHANE
<0.0t0
mg/L
<0.33
#Iday
<0.010
mglL
<0.06
#/day
3
EPA 625
0.010
INDENO(1,2,3-CD)
PYRENE
<0.010
mglL
<0.33
#/day
<0.010
mglL
<0.06
#/day
3
EPA 625
0.010
ISOPHORONE
<0.010
mg/L
<0.33
#/day
<0.010
mg!L
<0.06
#/day
3
EPA 625
0.010
NAPHTHALENE
<0.0t0
mg/L
<0.33
#/day
<0.010
mglL
<0.06
#/day
3
EPA 625
0.010
NITROBENZENE
<0.010
mglL
<0.33
#/day
<0.010
mg/L
<0.06
#lday
3
EPA 625
0.010
N-NITROSODI-N-
PROPYLAMINE
<0.010
mglL
<0.33
#/day
<0.010
mg/L
<0.06
#!day
3
EPA 625
0,010
N-NITROSODI-
METHYLAMINE
<0.010
mglL
<0.33
#!day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
N-NITROSODI-
PHENYLAMINE
<0.010
mglL
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
PHENANTHRENE
<0.010
mglL
<0.33
#/day
<0.010
mglL
<0.06
#/day
3
EPA 625
0.010
PYRENE
<0.010
mg/L
<0.33
#/day
<0.010
mg/L
<0.06
#/day
3
EPA 625
0.010
1,2,4
TRICHLOROBENZENE
<0.010
mg/L
<0.33
#!day
<0.010
mg/L
<0.06
#!day
3
EPA 625
0.010
Use this space (or a separate sheet) to
provide information
on
other base
-neutral compounds
requested
by the permit
writer
Use this space (or a separate sheet) to provide information on other pollutants (e.g , pesticides) requested by the permit writer
END OF PART D.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 15 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
SUPPLEMENTAL APPLICATION INFORMATION
PART E. TOXICITY TESTING DATA
POTWs meeting one or more
facility's discharge points:
required to have one unde
• At a minimum, th
species), or the r
show no appreciz
information on co
using 40 CFR Pa
requirements for
• In addition, subm
conducted during
toxicity reduction
• If you have alreat
requested
f est summaries
If no biomonitoring data is
complete.
of the following criteria must provide the results of whole effluent toxicity tests for acute or chronic toxicity for each
11 POTWs with a lesion flow rate areater than or eoual to 1 0 mad: 21 POTWs with a oretreatment nroaram (or those
of the
that are
ium of two
1 results
conducted
Mate QA/QC
;ity test
is of a
"on
e methods.
rm to
Due to the complexity of
from DENR, data from the
this form. Rather, copies
reference. There are a total
are listed below.
Ceriodaphnia dubia
3/12/07; 3/15/07; 6/4/07; 6/7/07;
3/1/06; 3/6/06; 6/21/06; 6/26/06;
9/7/06; 12/4/06; 12/7/06; 3/2/05;
10/19/05; 10/24/05; 11/9/05;
12/12/05; 3/3/04; 3/8/04; 6/2/04;
12/20/04; 3/2/03; 3/6/03; 6/15/03;
12/8/03; 9/4/02; 9/9/02;11/27/01;11/29/01;12/12/01;12/17/01
Fathead Minnow
12/2/07; 12/4/07; 12/6/07
the Toxicity Tests, and per instructions
Toxicity Tests will not be inputted in
of the Toxicity Tests are attached for
of 59 toxicity tests provided and they
9/10/07; 9/13/07; 12/3/07; 12/6/07;
7/19/06; 7/24/06; 8/9/06; 8/14/06; 9/4/06;
3/7/05; 6/1/05; 6/6/05; 9/7/05; 9/12/05;
11/14/05; 11/30/05; 12/5/05; 12/8/05;
6/7/04; 9/15/04; 9/20/04; 12/15/04;
6/19/03; 9/3/03; 9/8/03; 12/3/03;
E.1. Required Tests.
Indicate the number
0 chronic
E.2. Individual Test Dat
column per test (wh
Allow one
Data from 2013 renewal
This data will be updated by March 6th
a. Test information
Test Species & test metho
Age at initiation of test
Outfall number
Dates sample collected
Date test started
Duration
b. Give toxicity test methods followed.
Manual title
Edition number and year of publication
Page number(s)
c. Give the sample collection method(s) used. For multiple grab samples, indicate the number of grab samples used.
24-Hour composite
Grab
d. Indicate where the sample was taken in relation to disinfection. (Check all that apply for each.
Before disinfection
After disinfection
After dechlorination
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 16 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
Test number: Test number: Test number:
e. Describe the point in the treatment process at which the sample was collected.
Sample was collected:
f. For each test, include whether the test was intended to assess chronic toxicity, acute toxicity, or both
Chronic toxicity
Acute toxicity
g. Provide the type of test performed.
Static
Static -renewal
Flow -through
h. Source of dilution water. If laboratory water, specify type; if receiving water, specify source.
Laboratory water
Receiving water
i. Type of dilution water. If salt water, specify "natural" or type of artificial sea salts or brine used.
Fresh water
Salt water
j. Give the percentage effluent used for all concentrations in the test series.
k. Parameters measured during he test. (State whether parameter meets test method specifications)
pH
Salinity
Temperature
Ammonia
Dissolved oxygen
I. Test Results.
Acute:
Percent survival in 100%
effluent
LC5o
95% C.I.
%
Control percent survival
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 17 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
Chronic:
NOEC
%
°
IC25
%
%
%
Control percent survival
%
ova
Other (describe)
m. Quality Control/Quality Assurance.
Is reference toxicant data available?
Was reference toxicant test within
acceptable bounds?
What date was reference toxicant test
run (MM/DD/YYYY)?
/ /
/ /
/ /
Other (describe)
E.3. Toxicity Reduction Evaluation.
❑ Yes 0 No
Is the treatment works involved in a Toxicity Reduction Evaluation?
If yes, describe:
E.4. Summary of Submitted Biomonitoring Test Information. If you have
cause of toxicity, within the past four and one-half years, provide the dates
of the results.
Date submitted: / / (MM/DD/YYYY)
submitted biomonitoring test information,
the information was submitted to the
permitting
or information regarding the
authority and a summary
Summary of results: (see instructions)
END OF PART E.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE.
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 18 o! 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
SUPPLEMENTAL APPLICATION INFORMATION
PART F.INDUSTRIAL USER DISCHARGES AND RCRAJCERCLA WASTES
All treatment works receiving discharges from significant industrial users or which receive RCRA,CERCLA, or other remedial wastes must
complete part F.
GENERAL INFORMATION:
F.1. Pretreatment program. Does the treatment works have, or is subject to, an approved pretreatment program?
0Yes ❑No
F.2. Number of Significant Industrial Users (SIUs) and Categorical Industrial Users (ClUs). Provide the number of each of the following types of
industrial users that discharge to the treatment works.
a. Number of non -categorical SIUs. 2
b. Number of ClUs. 2
SIGNIFICANT INDUSTRIAL USER INFORMATION:
Supply the following information for each SIU. If more than one SIU discharges to the treatment works, copy questions F.3 through F.8 and
provide the information requested for each SIU.
F.3. Significant Industrial User Information. Provide the name and address of each SIU discharging to the treatment works. Submit additional pages
as necessary.
Name: Spindale Colormasters, LLC
Mailing Address: 101 Spindale Street
Spindale, NC 28160
F.4. Industrial Processes. Describe all the industrial processes that affect or contribute to the SIU's discharge.
Dyed yarn, cutting and sewing tapestry fabric for wall and table top decorations.
F.5. Principal Product(s) and Raw Material(s). Describe all of the principal processes and raw materials that affect or contribute to the SIU's
discharge.
Principal product(s): Wall and tabletop decor products, dyed yam
Raw material(s): cotton, polyester, acrylic
F.6. Flow Rate.
a. Process wastewater flow rate. Indicate the average daily volume of process wastewater discharge into the collection system in gallons per
day (gpd) and whether the discharge is continuous or intermittent.
150,000 gpd ( continuous or X intermittent)
b. Non -process wastewater flow rate. Indicate the average daily volume of non -process wastewater flow discharged into the collection system
in gallons per day (gpd) and whether the discharge is continuous or intermittent.
15,000 gpd ( continuous or X intermittent)
F.7. Pretreatment Standards. Indicate whether the SIU is subject to the following:
a. Local limits © Yes 0 No
b. Categorical pretreatment standards 0 Yes 0 No
If subject to categorical pretreatment standards, which category and subcategory?
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 19 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
F.8. Problems at the Treatment Works Attributed to Waste Discharge by the SIU. Has the SIU caused or contributed to any problems (e.g.,
upsets, interference) at the treatment works in the past three years?
❑ Yes 0 No If yes, describe each episode.
RCRA HAZARDOUS WASTE RECEIVED BY TRUCK, RAIL, OR DEDICATED PIPELINE:
F.9. RCRA Waste. Does the treatment works receive or has it in the past three years received RCRA hazardous waste by truck, rail or dedicated pipe?
❑ Yes ® No (go to F.12)
F.10. Waste transport. Method by which RCRA waste is received (check all that apply):
❑ Truck 0 Rail ❑x Dedicated Pipe
F.11. Waste Description. Give EPA hazardous waste number and amount (volume or mass, specify units).
EPA Hazardous Waste Number Amount Units
CERCLA (SUPERFUND) WASTEWATER, RCRA REMEDIATION/CORRECTIVE ACTION
WASTEWATER, AND OTHER REMEDIAL ACTIVITY WASTEWATER:
F.12. Remediation Waste. Does the treatment works currently (or has it been notified that it will) receive waste from remedial activities?
❑ Yes (complete F.13 through F.15.) ❑ No
F.13. Waste Origin. Describe the site and type of facility at which the CERCLA/RCRA/or other remedial waste originates (or is expected to originate in
the next five years).
F.14. Pollutants. List the hazardous constituents that are received (or are expected to be received). Include data on volume and concentration, if
known. (Attach additional sheets if necessary.)
F.15. Waste Treatment.
a. Is this waste treated (or will be treated) prior to entering the treatment works?
® Yes ❑ No
If yes, describe the treatment (provide information about the removal efficiency):
Manual bar -screen for removal of raos, lint and debris
b. Is the discharge (or will the discharge be) continuous or intermittent?
0 Continuous © Intermittent If intermittent, describe discharge schedule.
END OF PART F.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 20 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
SUPPLEMENTAL APPLICATION INFORMATION
PART F.INDUSTRIAL USER DISCHARGES AND RCRAICERCLA WASTES
All treatment works receiving discharges from significant Industrial users or which receive RCRA,CERCLA, or other remedial wastes must
complete part F.
GENERAL INFORMATION:
F.1. Pretreatment program. Does the treatment works have, or is subject to, an approved pretreatment program?
0 Yes ❑ No
F.2. Number of Significant Industrial Users (Sills) and Categorical Industrial Users (ClUs). Provide the number of each of the following types of
industrial users that discharge to the treatment works.
c. Number of non -categorical Sills. 2
d. Number of CIUs. 2
SIGNIFICANT INDUSTRIAL USER INFORMATION:
Supply the following information for each SIU. If more than one SIU discharges to the treatment works, copy questions F.3 through F.8 and
provide the information requested for each SIU.
F.3. Significant Industrial User Information. Provide the name and address of each SIU discharging to the treatment works. Submit additional pages
as necessary.
Name: The Timken Corporation
Mailing Address: 1510 Highway 221 South
Rutherfordton, NC 28139
F.4. Industrial Processes. Describe all the industrial processes that affect or contribute to the SIU's discharge.
Manganese phosphatinq, tumbling and alkaline washing, grinding, heat treatment and assembly of ball bearings and bushings.
F.5. Principal Product(s) and Raw Material(s). Describe all of the principal processes and raw materials that affect or contribute to the SIU's
discharge.
Principal product(s): Assembled bearings, Nital Etching Process, Black Oxide and Passivation process lines.
Raw material(s): steel stock, iron forgings
F.6. Flow Rate.
c. Process wastewater flow rate. Indicate the average daily volume of process wastewater discharge into the collection system in gallons per
day (gpd) and whether the discharge is continuous or intermittent.
9,000 gpd ( continuous or X intermittent)
d. Non -process wastewater flow rate. Indicate the average daily volume of non -process wastewater flow discharged into the collection system
in gallons per day (gpd) and whether the discharge is continuous or intermittent.
6,000 gpd ( continuous or X intermittent)
F.7. Pretreatment Standards. Indicate whether the SIU is subject to the following:
a. Local limits ® Yes 0 No
b. Categorical pretreatment standards ® Yes ❑ No
If subject to categorical pretreatment standards, which category and subcategory?
40 CFR 433 — Metal Finishing
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 21 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
F.8. Problems at the Treatment Works Attributed to Waste Discharge by the SIU. Has the SIU caused or contributed to any problems (e.g.,
upsets, interference) at the treatment works in the past three years?
❑ Yes No If yes, describe each episode.
RCRA HAZARDOUS WASTE RECEIVED BY TRUCK, RAIL, OR DEDICATED PIPELINE:
F.9. RCRA Waste. Does the treatment works receive or has it in the past three years received RCRA hazardous waste by truck, rail or dedicated pipe?
❑ Yes 0 No (go to F.12)
F.10. Waste transport Method by which RCRA waste is received (check all that apply):
0 Truck 0 Rail 0 Dedicated Pipe
F.11. Waste Description. Give EPA hazardous waste number and amount (volume or mass, specify units).
EPA Hazardous Waste Number Amount Units
CERCLA (SUPERFUND) WASTEWATER, RCRA REMEDIATION/CORRECTIVE ACTION
WASTEWATER, AND OTHER REMEDIAL ACTIVITY WASTEWATER:
F.12. Remediation Waste. Does the treatment works currently (or has it been notified that it will) receive waste from remedial activities?
0 Yes (complete F.13 through F.15.) 0 No
F.13. Waste Origin. Describe the site and type of facility at which the CERCLA/RCRA/or other remedial waste originates (or is expected to originate in
the next five years).
F.14. Pollutants. List the hazardous constituents that are received (or are expected to be received). Include data on volume and concentration, if
known. (Attach additional sheets if necessary.)
F.15. Waste Treatment.
c. Is this waste treated (or will be treated) prior to entering the treatment works?
0Yes ❑ No
If yes, describe the treatment (provide information about the removal efficiency):
In-house wastewater pretreatment system Grit removal, pH adjustment, sedimentation, oil -water separation, spill protection.
d. Is the discharge (or will the discharge be) continuous or intermittent?
❑ Continuous 0 Intermittent If intermittent, describe discharge schedule.
END OF PART F.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 22 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
SUPPLEMENTAL APPLICATION INFORMATION
PART F. INDUSTRIAL USER DISCHARGES AND RCRA/CERCLA WASTES
All treatment works receiving discharges from significant industrial users or which receive RCRA,CERCLA, or other remedial wastes must
complete part F.
GENERAL INFORMATION:
F.1. Pretreatment program. Does the treatment works have, or is subject to, an approved pretreatment program?
© Yes ❑ No
F.2. Number of Significant Industrial Users (SIUs) and Categorical Industrial Users (ClUs). Provide the number of each of the following types of
industrial users that discharge to the treatment works.
e. Number of non -categorical SIUs. 2
f. Number of ClUs. 2
SIGNIFICANT INDUSTRIAL USER INFORMATION:
Supply the following Information for each SIU. If more than one SIU discharges to the treatment works, copy questions F.3 through F.8 and
provide the Information requested for each SIU.
F.3. Significant Industrial User Information. Provide the name and address of each SIU discharging to the treatment works. Submit additional pages
as necessary.
Name: Ultimate Textiles, Inc.
Mailing Address: 1437 US Highway 221 South
Rutherfordton, NC 28139
F.4. Industrial Processes. Describe all the industrial processes that affect or contribute to the SIU's discharge.
Custom dyeing of textile fabrics
F.5. Principal Product(s) and Raw Material(s). Describe all of the principal processes and raw materials that affect or contribute to the SIU's
discharge.
Principal product(s): Dyed fabrics used in the upholstered fumiture industry.
Raw material(s): cotton, poly/cotton, cotton/acetate, dyes, chemicals
F.6. Flow Rate.
e. Process wastewater flow rate. Indicate the average daily volume of process wastewater discharge into the collection system in gallons per
day (gpd) and whether the discharge is continuous or intermittent.
78,107 gpd ( continuous or X intermittent)
f. Non -process wastewater flow rate. Indicate the average daily volume of non -process wastewater flow discharged into the collection system
in gallons per day (gpd) and whether the discharge is continuous or intermittent.
3,703 gpd ( continuous or X intermittent)
F.7. Pretreatment Standards. Indicate whether the SIU is subject to the following:
a. Local limits El Yes 0 No
b. Categorical pretreatment standards 0 Yes 0 No
If subject to categorical pretreatment standards, which category and subcategory?
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 23 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
F.8. Problems at the Treatment Works Attributed to Waste Discharge by the SIU. Has the SIU caused or contributed to any problems (e.g.,
upsets, interference) at the treatment works in the past three years?
❑ Yes 0 No If yes, describe each episode.
RCRA HAZARDOUS WASTE RECEIVED BY TRUCK, RAIL, OR DEDICATED PIPELINE:
F.9. RCRA Waste. Does the treatment works receive or has it in the past three years received RCRA hazardous waste by truck, rail or dedicated pipe?
❑ Yes 0 No (go to F.12)
F.10. Waste transport. Method by which RCRA waste is received (check all that apply):
❑ Truck 0 Rail 0 Dedicated Pipe
F.11. Waste Description. Give EPA hazardous waste number and amount (volume or mass, specify units).
EPA Hazardous Waste Number Amount Units
CERCLA (SUPERFUND) WASTEWATER, RCRA REMEDIATION/CORRECTIVE ACTION
WASTEWATER, AND OTHER REMEDIAL ACTIVITY WASTEWATER:
F.12. Remediation Waste. Does the treatment works currently (or has it been notified that it will) receive waste from remedial activities?
0 Yes (complete F.13 through F.15.) 0 No
F.13. Waste Origin. Describe the site and type of facility at which the CERCLAIRCRAtor other remedial waste originates (or is expected to originate in
the next five years).
F.14. Pollutants. List the hazardous constituents that are received (or are expected to be received). Include data on volume and concentration, if
known. (Attach additional sheets if necessary.)
F.15. Waste Treatment.
e. Is this waste treated (or will be treated) prior to entering the treatment works?
0 Yes ❑ No
If yes, describe the treatment (provide information about the removal efficiency):
Sweco vibrating screen, pH recorder flow recorder temp. sample collection (ISCO).
lint removal
f. Is the discharge (or will the discharge be) continuous or intermittent?
❑ Continuous 0 Intermittent If intermittent, describe discharge schedule.
END OF PART F.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 24 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
SUPPLEMENTAL APPLICATION INFORMATION
PART F.INDUSTRIAL USER DISCHARGES AND RCRA/CERCLA WASTES
All treatment works receiving discharges from significant industrial users or which receive RCRA,CERCLA, or other remedial wastes must
complete part F.
GENERAL INFORMATION:
F.1. Pretreatment program. Does the treatment works have, or is subject to, an approved pretreatment program?
LIYes ❑No
F.2. Number of Significant Industrial Users (SIUs) and Categorical Industrial Users (ClUs). Provide the number of each of the following types of
industrial users that discharge to the treatment works.
g. Number of non -categorical Sills. 2
h. Number of Gills. 2
SIGNIFICANT INDUSTRIAL USER INFORMATION:
Supply the following Information for each SIU. If more than one SIU discharges to the treatment works, copy questions F.3 through F.8 and
provide the information requested for each SIU.
F.3. Significant Industrial User Information. Provide the name and address of each SIU discharging to the treatment works. Submit additional pages
as necessary.
Name: Watts Regulator
Watts closed in February 2009
Mailing Address: 100 Watts Road
Spindale, NC 28160
F.4. Industrial Processes. Describe all the industrial processes that affect or contribute to the SIU's discharge.
Manufactures water supply and drainage products for commercial and residential use.
F.5. Principal Product(s) and Raw Material(s). Describe all of the principal processes and raw materials that affect or contribute to the SIU's
discharge.
Principal product(s): Temperature and pressure relief valves, ball valves, water supply sink and drainage products.
Raw material(s): bronze ingot, strip steel and brass, tubular brass and copper, plastic resin, copper and nickel anode and chromium flake
F.6. Flow Rate.
g. Process wastewater flow rate. Indicate the average daily volume of process wastewater discharge into the collection system in gallons per
day (gpd) and whether the discharge is continuous or intermittent.
4,650 gpd ( continuous or X intermittent)
h. Non -process wastewater flow rate. Indicate the average daily volume of non -process wastewater flow discharged into the collection system
in gallons per day (gpd) and whether the discharge is continuous or intermittent.
19,500 gpd ( continuous or X intermittent)
F.7. Pretreatment Standards. Indicate whether the SIU is subject to the following:
a. Local limits ® Yes ❑ No
b. Categorical pretreatment standards ® Yes 0 No
If subject to categorical pretreatment standards, which category and subcategory?
40 CFR 433 — Metal Finishing (Electroplating)
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 25 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
F.8. Problems at the Treatment Works Attributed to Waste Discharge by the SIU. Has the SIU caused or contributed to any problems (e.g.,
upsets, interference) at the treatment works in the past three years?
❑ Yes ® No If yes, describe each episode.
RCRA HAZARDOUS WASTE RECEIVED BY TRUCK, RAIL, OR DEDICATED PIPELINE:
F.9. RCRA Waste. Does the treatment works receive or has it in the past three years received RCRA hazardous waste by truck, rail or dedicated pipe?
❑ Yes 0 No (go to F.12)
F.10. Waste transport. Method by which RCRA waste is received (check all that apply):
❑ Truck 0 Rail 0 Dedicated Pipe
F.11. Waste Description. Give EPA hazardous waste number and amount (volume or mass, specify units).
EPA Hazardous Waste Number Amount Units
CERCLA (SUPERFUND) WASTEWATER, RCRA REMEDIATION/CORRECTIVE ACTION
WASTEWATER, AND OTHER REMEDIAL ACTIVITY WASTEWATER:
F.12. Remediation Waste. Does the treatment works currently (or has it been notified that it will) receive waste from remedial activities?
❑ Yes (complete F.13 through F.15.) 0 No
F.13. Waste Origin. Describe the site and type of facility at which the CERCLA/RCRA/or other remedial waste originates (or is expected to originate in
the next five years).
F.14. Pollutants. List the hazardous constituents that are received (or are expected to be received). Include data on volume and concentration, if
known. (Attach additional sheets if necessary.)
F.15. Waste Treatment.
g. Is this waste treated (or will be treated) prior to entering the treatment works?
❑ Yes ❑ No
If yes, describe the treatment (provide information about the removal efficiency):
Pretreatment System; activated carbon, chemical precipitation, filtration, flocculation, pH adjustment, sedimentation, spill protection
h. Is the discharge (or will the discharge be) continuous or intermittent?
❑ Continuous © Intermittent If intermittent, describe discharge schedule.
END OF PART F.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22.
Page 26 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
SUPPLEMENTAL APPLICATION INFORMATION
PART G. COMBINED SEWER SYSTEMS
If the treatment works has a c
G.1. System Map. Provide a
a. All CSO discharge
b. Sensitive use areal
outstanding natura
c. Waters that suppor
NOT APPLICABLE
sensitive aquatic ecosystems, and
G.2. System Diagram. Provice d udyidin, ewer in uie map pruviaeu . i ur un a separate thawing, ur uie wire. fined sewer collection system that
includes the following information.
a. Location of major sewer trunk lines, both combined and separate sanitary.
b. Locations of points where separate sanitary sewers feed into the combined sewer system.
c. Locations of in -line and off-line storage structures.
d. Locations of flow -regulating devices.
e. Locations of pump stations.
CSO OUTFALLS:
Complete questions G.3 through G.6 once for each CSO discharge point.
G.3. Description of Outfall.
a. Outfall number
b. Location
(City or town, if applicable) (Zip Code)
(County) (State)
(Latitude) (Longitude)
c. Distance from shore (if applicable) ft.
d. Depth below surface (if applicable) ft.
e. Which of the following were monitored during the last year for this CSO?
❑ Rainfall 0 CSO pollutant concentrations
❑ CSO flow volume 0 Receiving water quality
f. How many storm events were monitored during the last year?
G.4. CSO Events.
a. Give the number of CSO events in the last year.
events (0 actual or 0 approx.)
b. Give the average duration per CSO event.
hours (0 actual or 0 approx.)
❑ CSO frequency
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 27 of 28

FACILITY NAME AND PERMIT NUMBER:
Spindale WWTP, NC0020644
PERMIT ACTION REQUESTED:
Renewal
RIVER BASIN:
Broad
c. Give the average volume per CSO event.
million gallons (0 actual or ❑ approx.)
d. Give the minimum rainfall that caused a CSO event in the last year
Inches of rainfall
G.5. Description of Receiving Waters.
a. Name of receiving water:
b. Name of watershed/river/stream system:
United State Soil Conservation Service 14-digit watershed code (if known):
c. Name of State Management/River Basin:
United States Geological Survey 8-digit hydrologic cataloging unit code (if known):
G.6. CSO Operations.
Describe any known water quality impacts on the receiving water caused by this CSO (e.g., permanent or intermittent beach closings, permanent or
intermittent shell fish bed closings, fish kills, fish advisories, other recreational loss, or violation of any applicable State water quality standard).
END OF PART G.
REFER TO THE APPLICATION OVERVIEW (PAGE 1) TO DETERMINE WHICH OTHER PARTS
OF FORM 2A YOU MUST COMPLETE.
Attached:
No attachments submitted with the
application
This information will be submitted by
March 6th
1. 2005 of LUVU V Y V Y 11 ii 111UC1 LI. 1 1V VV JU111111U111.
2. Summaries of the last 12 months of DMRs
3. Summary of Temperature
4. Copies of three SCANs and a summary of some of the data.
5. Copies of 59 Toxicity Tests.
EPA Form 3510-2A (Rev. 1-99). Replaces EPA forms 7550-6 & 7550-22. Page 28 of 28