SW4160501_HISTORICAL FILE_20160816

STORMWATER DIVISION CODING SHEET
POST -CONSTRUCTION PERMITS
PERMIT NO.
SW(D
DOC TYPE
❑ CURRENT PERMIT
❑ APPROVED PLANS
K12HISTORICAL FILE
((❑
COMPLIANCE EVALUATION INSPECTION
DOC DATE��(�/gyp
YYYYMMDD
I

Mr. Shahid Chaudhary
State Stormwater Permit SW4160501
Discount Auto Parts
Walkertown, Forsyth County
August 16, 2016
Page 2
After thirty days from the date of this letter, this project will be kept on file at the NCDEQ
Division of Energy, Mineral and Land Resources, Land Quality Section, Winston Salem
Regional Office. If you have questions after that time, please contact Matt Gantt, of that office.
Until that time, if you have any questions or need additional information concerning this permit,
please contact Richard Riddle at [phone]; or [e-mail].
Sincerely,
Original Signed by Richard L. Riddle, Jr.
Richard L. Riddle, Jr., Plans Reviewer
for Tracy E. Davis, P.E., CPM
Director, Division of Energy,
Mineral and Land Resources
cc: NCDEQ DEMLR Winston Salem Regional Office
Randall G. Kale, Kale Engineering
Central Files
Stormwater Permitting Unit Files
Attachments
StateofbrthCarolim I Entironmental Quality Energy, \Sneral and Land Resotnas
1612 \Sul Smiee Center 151'- North Salisbm Street I Raleigh, NC 27699.1612
9197079_00 T

State Stormwater Permit
Permit No. SW4160501
Discount Auto Parts, LLC
Designer's Certification
I, , as a duly registered in the
State of North Carolina, having been authorized to observe (periodically/ weekly/
full time) the construction of the project,
Discount Auto Parts, LLC
(Project Name)
for (Project Owner) hereby state that, to the
best of my abilities, due care and diligence was used in the observation of the project
construction such that the construction was observed to be built within substantial
compliance and intent of the approved plans and specifications.
The checklist of items on page 6 of this permit is included in the Certification.
Noted deviations from approved plans and specification:
Signature
Registration Number
Date
SEAL
Page 5 of 6

State Stormwater Permit
Permit No. SW4160501
Certification Requirements:
1. The drainage area to the system contains approximately the permitted
acreage.
2. The drainage area to the system contains no more than the permitted
amount of built -upon area.
3. All the built -upon area associated with the project is graded such that the
runoff drains to the system.
4. All roof drains are located such that the runoff is directed into the system.
5. The outlet/bypass structure elevations are per the approved plan.
6. The outlet structure is located per the approved plans.
7. Trash rack is provided on the outlet/bypass structure.
8. All slopes are grassed with permanent vegetation, per the vegetation plan.
9. Vegetated slopes are no steeper than 3:1.
10. The inlets are located per the approved plans and do not cause short-
circuiting of the system.
11. The permitted amounts of surface area and/or volume have been
provided. .
12. Required drawdown devices are correctly sized per the approved plans.
13. All required design depths are provided.
14. All required parts of the system are provided, such as a vegetated shelf,
and a forebay.
15. The required system dimensions are provided per the approved plans.
cc: Matt Gantt
NCDEQ-DEMLR, Winston-Salem Regional Office
585 Waughtown Street
Winston Salem. North Carolina 27107
Page 6 of 6