NCG170125_Carolina Mills Inc Plant 8 Inspection Letter_20210913

ROY COOPER
Governor
ELIZABETH S. BISER
Secretary
BRIAN WRENN
Director
Carolina Mills Incorporated
Attention: Carson Copeland
618 Carolina Avenue
Maiden, North Carolina 28650
NORTH CAROLINA
Enrlronmental Quality
September 13, 2021
Subject: Compliance Evaluation Inspection
Carolina Mills Incorporated — Plant 8
NPDES Certificate of Coverage —NCG170125
Catawba County, North Carolina
Dear Mr. Copeland,
Enclosed please find a copy of the Compliance Evaluation Inspection Report
for the inspection we conducted at the Carolina Mills Incorporated — Plant 8 on
September 1, 2021. Please note that in the stormwater inspection report summary
we ask that a recission request be submitted for the facility.
The report should be self-explanatory; however, should you have any questions,
please do not hesitate to contact me at [phone] or by E-mail at
[e-mail].
Enclosure
c: Laserfiche
Sincerely,
es Moore
Assistant Regional Engineer
,PTDEQ�
fvm�v�- Ymlb\
/-
North
Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
Mooresville Regional Office 1 610 East Center Avenue. Sutte 301 1 Mooresville, North Carohna 28115
704.663.1699

Compliance Inspection Report
Permit: NCG170125 Effective: 08/01/19 Expiration: 05/31/24 Owner: Carolina Mills
SOC: Effective: Expiration: Facility: Carolina Mills Incorporated -Plant 8
County: Catawba 618 Carolina Ave
Region: Mooresville
Maiden NC 28650
Contact Person: Carson Copeland Title: Phone: [phone]
Directions to Facility:
System Classifications: SWNC,
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 09/01/2021 Entry Time 02:10PM
Primary Inspector: Jesse M McDonnell
Secondary Inspector(s):
Certification:
Phone:
Exit Time: 02:20PM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Textile Mill Products Stormwater Discharge COC
Facility Status: ❑ Compliant ❑ Not Compliant
Question Areas:
Storm Water
(See attachment summary)
Page 1 of 3

Permit: NCG170125 Owner - Facility: Carolina Mills
Inspection Date: 09/01/2021 Inspection Type: Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
This was a routine inspection. This facility is no longer in operation. A recission request needs to be submitted. If the
permittee wishes to keep the permit, all permit requirements must be maintained at the facility. Contact the Mooresville
Regional Office if there are any questions.
Page 2 of 3

Permit: NCG170125 Owner -Facility: Carol ina Mills
Inspection Date: 09/01/2021 Inspection Type: Compliance Evaluation Reason for Visit: Routine
Page 3of3