WI0600219_DEEMED FILES_20191011

Rogers, Michael From: Sent: To: Cc: Subject: Rogers, Michael Friday, October 11, 2019 3:50 PM Stewart, Leslie L CTR (USA) Humphrey, Paul G CIV USARMY USAG (USA); Shrestha, Shristi R WI0600219 NOi for Fort Bragg Thank you for submitting the Notice of Intent to Construct or Operate Injection Wells (NOi) for the above referenced site. Please remember to submit the following regarding this injection activity: 1. Well Construction Records (GW-1) and Abandonment Records (GW-30) when completed (if applicable). Please provide copies of the GW-ls and GW-30s if not already submitted (originals go the address printed on the form). NOTE: Direct push or Geoprobe wells are considered wells and require construction (GW-1) and abandonment forms (GW-30). If well construction/abandonment information is the same for the wells, only one form needs to be completed-just indicate total number of injection points in the Comments/Remarks section of form. 2. Injection Event Records (IER). All injections, including air and passive systems require an IER. The IER can be modified for air sparge wells (e.g., air flow 'continuous' for date or rate of injection, etc.). The forms can be found under the following link https://deq.nc.gov/about/divisions/water-resources/water-resources-permits/wastewater-branch/ground-water-protection/ground-water-reporting-forms When submitting the above forms, you will need to enter the nine-digit alpha-numeric number on the form (i.e., WI0XXXXXX) that has been assigned to the injection activity at this site. This notification has been given the deemed permit number WI0600219. This number is also referenced in the subject line of this email. You may if you wish, scan and send back as attachments in reply to this email, as it will already have the assigned deemed permit number in the subject line. Thank you for your cooperation. -----Original Message-----· From: Stewart, Leslie L CTR (USA) [mailto:[e-mail]] Sent: Thursday, October 10, 2019 11:24 AM To: Rogers,_ Michael <[e-mail]> Cc: Humphrey, Paul G CIV USARMY USAG (USA) <[e-mail]> Subject: [External] NO ls for Fort Bragg CAUTION: External email. Do not click links or open attachments unless you verify. Send all suspicious email as an attachment to [e-mail]<mailto:[e-mail]> Hi Mike, I was only able to track down one well construction log (attached). The tables that we have that include information on the wells were attached to the permit packages. I have also attached an excel spreadsheet with monitoring well coordinates. Please let me know if there is anything else that you need from us. Thanks, 1
Leslie
Leslie Stewart
Installation Restoration Program Support Directorate of Public Works Environmental Management Branch Bldg 3-1137
Fort Bragg, NC 28310
Phone: [phone]
Fax: [phone]
2
Rogers, Michael
From:
Sent:
To:
Subject:
Attachments:
Gents-
Rogers, Michael
Friday, October 11, 2019 4:38 PM
Allen, Trent; Brantley, Mark
WI0600219 NOi for Fort Bragg
Monitoring_Well_Coordinates.xlsx; 8-3004-MW4 Well Log.pdf; Permit Package
CCFTBR0016 In-Situ GW Rem Notification Aquifer Test Well (NOi) Rev. 3-21-2018_
1.pdf; Permit Package CCFTBR0017 In-Situ GW Rem Notification Aquifer Test Well
(NOi) Rev. 3-21-2018_1.pdf; Permit Package CCFTBR0037 In-Situ GW Rem Notification
Aquifer Test Well (NOi) Rev. 3-21-2018_1.pdf; Permit Package FTBR-310 In-Situ GW
Rem Notification Aquifer Test Well (NOi) Rev. 3-21-2018_ 1.pdf;
lnjection_Well_Cover_Letter_Signed_23Sep19.pdf; Permit Package CCFTBR013 In Situ
GW Rem Notification Aquifer Test Well Signed.pdf
Please find attached a permitted by rule NOi package. I processed/combined the different injection activity locations at
Ft. Bragg into 1 NOi for this project (WI0600219}.
Best Regards,
-----Original Message-----
From: Stewart, Leslie L CTR (USA) [mailto:[e-mail]]
Sent: Thursday, October 10, 2019 11:24 AM
To: Rogers, Michael <[e-mail]>
Cc: Humphrey, Paul G CIV USARMY USAG (USA) <[e-mail]>
Subject: [External] NOls for Fort Bragg
CAUTION: External email. Do not click links or open attachments unless you verify. Send all suspicious email as an
attachment to [e-mail]<mailto:[e-mail]>
Hi Mike,
I was only able to track down one well construction log (attached). The tables that we have that include information on
the wells were attached to the permit packages. I have also attached an excel spreadsheet with monitoring well
coordinates. Please let me know if there is anything else that you need from us.
Thanks,
Leslie
Leslie Stewart
Installation Restoration Program Support Directorate of Public Works Environmental Management Branch Bldg 3-1137
Fort Bragg, NC 28310
Phone: [phone]
Fax: [phone]
1
Ro g ers, Michael
From:
Sent:
To:
Cc:
Subject:
Attachments:
Stewart, Leslie L CTR (USA) <[e-mail]>
Thursday, October 10, 2019 11:24 AM
Rogers, Michael
Humphrey, Paul G CIV USARMY USAG (USA)
[External] NOls for Fort Bragg
Monitoring_Well_Coordinates.xlsx; 8-3004-MW4 Well Log.pdf
CAUTION: External email. Do not click links or open attachments unless you verify. Send all suspicious email as an
attachment to [e-mail]<mailto:[e-mail]>
Hi Mike,
I was only able to track down one well construction log (attached). The tables that we have that include information on
the wells were attached to the permit packages. I have also attached an excel spreadsheet with monitoring well
coordinates. Please let me know if there is anything else that you need from us.
Thanks,
Leslie
Leslie Stewart
Installation Restoration Program Support Directorate of Public Works Environmental Management Branch Bldg 3-1137
Fort Bragg, NC 28310
Phone: [phone]
Fax: [phone]
1
1
Site Number
Monitoring Well ID
Latitude
Longitude
CCFTBR0013
4040-5
35.157580
-78.991124
4040-8A
35.157684
-78.99T454
4040-8R
35.157694
-78.991450
CCFTBR0016 (
8-3004-MW4
35.151558
-78.984776
CCFTBR0017
8-547E-A-MW 1 R
35.157621
-78.973095
8-5476A-MW2R
35.157654
-78.972987
CCFTBR0037
P6718-MW1A
35.128037
-78.943103
P6718-MW 1 C
35.128016
-78.943158
FTBR-310
RW 19-01 •
35.173484
-79.015877
RW19-03
35.173624
-79.015793
RW19-07
35.173331
-79.016435
11 rr,92-

DEPARTMENT OF THE ARMY
US ARMY INSTALLATION MANAGEMENT COMMAND
HEADQUARTERS, UNITED STATES ARMY GARRISON, FORT BRAGG
2175 REILLY ROAD, STOP A
REPLYTO FORT BRAGG NORTH CAROLINA 28310-5000
ATTENTION OF
23 September 2019
Directorate of Public Works
North Carolina Department of Environmental Quality
Division of Water Resources
1636 Mail Service Center
Raleigh, North Carolina 27699-1636
Please firid attached two (2) paper-copies and one (1) electronic copy (CD) of five (5)
notifications of intent to operate small-scale injection wells at Sites CCFTBR0013,
CCFTBR0016, CCFTBR0017, CCFTBR0037, and FTBR-310 located on Fort Bragg,
North Carolina. The injection well permits are needed to surge and flush wells
containing residual free product with surfactant.
Any questions regarding these injection well permits should be directed to Ms. Leslie
Stewart, Installation Restoration Program (IRP) Support, by email at
[e-mail] or by phone at 910-432-8467 .
Thank you for your assistance with this process.
Sincerely,
?o_.J) ¼,____.,.._..,,----------
Paul Humphrey
Chief, Environmental Management Branch
North Carolina Department of Environmental Quality -Division of Water Resources
NOTIFICATION OF_ INTENT (NOi) TO CONSTRUCT OR OPERATE INJECTION WELLS
The following are "permitted by rule" and do not require an individual permit when constructed in accordance
with the rules of 15A NCAC 02C .0200 (NOTE: This form must be received at least 14 DAYS prior to in jection )
AQUIFER TEST WELLS (15A NCAC 02C .0220)
These wells are used to inject uncontaminated fluid into an aquifer to determine aquifer hydraulic characteristics.
IN SITU REMEDIATION (15A NCAC 02C .0225 ) or TRACER WELLS (15A NCAC 02C .0229 ):
1) Passive In jection S vstems -In-well delivery systems to diffuse injectants into the subsurface. Examples include
ORC socks, iSOC systems, and other gas infusion methods (Note: Injection Event Records (IER) do not need to be
submitted for replacement of each sock used in ORC systems). ·
2) Small-Scale In jection O p erations -Injection wells located within a land surface area not to exceed 10,000
square feet for the purpose of soil or groundwater remediation or tracer tests. An individual permit shall be required
for test or treatment a~eas exceeding 10,000 square feet.
3) Pilot Tests -Preliminary studies conducted for the purpose of evaluating the technical feasibility of a
remediation strategy in order to develop a full scale remediation plan for future implementation, and where the
surface area of the injection zone wells are located within an area that does not exceed five percent of the land
surface above the known extent of groundwater contamination. An iqdividual permit shall be required to conduct
more than one pilot test on any separate groundwater contaminant plume.
4) Air Injection Wells -Used to inject ambient air to enhance in-situ treatment of soil or groundwater.
Print Clearly or Type Information. Illegible Submittals Will Be Returned As Incomplete.
DATE: 19 August
byDWR)
. 20 19 - -
PERMIT NO. ________ (to be filled in
A. WELL TYPE TO BE CONSTRUCTED OR OPERATED
(1)
(2)
(3)
(4)
(5)
(6)
___ Air Injection Well. ..................................... Complete sections B through F, K, N
___ Aquifer Test Well.. ..................................... Complete sections B through F, K, N
____ Passive Injection System ............................... Complete sections B through F, H-N
X_Small-Scale Injection Operation ...................... Complete sections B through N
____ Pilot Test ................................................. Complete sections B through N
-~-Tracer Injection Well ................................... Complete sections B through N
B. STATUS OF WELL OWNER: Choose an item.
C. WELL OWNER(S) -State name of Business/ Agency, and Name and Title of person delegated authority to
sign on behalf of the business or agency:
Name(s): Monica A. Stephenson, Directorate of Public Works
Mailing Address: IMBG-PWE_M, 4-2175 Reilly Road Stop A
City: Fort Bragg State: NC Zip Code: 28310-5000 County: Cumberland
Day Tele No.: 910-396-4009 Cell No.: NA,___ _______ _
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page 1
EMAIL Address: [e-mail] Fax No.: 910-396-4009_
D. PROPERTY OWNER(S) (if different than well owner/applicant)
Name and Title: Same as Above ________________________ _
CompanyName ---------------------------------
Mailing Address:---------------------------------
City: _____________ State: __ Zip Code: _______ County: _____ _
DayTeleNo.: ____________ _ Cell No.: __________ _
EMAIL Address: _____________ _ Fax No.: ___________ _
E. PROJECT CONTACT (Typically Environmental Engineering Firm)
Name and Title: Renee Hill, Geologist ________________________ _
Company Name US Army Corp of Engineers, Savannah District ____________ _
Mailing Address: 100 West Oglethorpe Ave _______________________ _
City: Savannah ______ State:_ GA_ Zip Code: 31401 ___ County:~C=h=a=th=a=m~-----
Day Tele No.: 912-652-5671 ____ Cell No.:_9~1=2~-6~7~7~-6~0~7~71~-----
EMAIL Address: [e-mail] ____ _ Fax No.: 912-652-5311 _____ _
F. PHYSICAL LOCATION OF WELL SITE
(I) Facility Name & Address: Site: FTBR-310. Ft Bragg_ NC
City: Fort Brag,0-_______ County: Cumberland Zip Code: 28310-5000
(2) Geographic Coordinates:_ Latitude**: ___ 0 --__ " or 0
Longitude**: 0 "or 0
Reference Datum: ________ Accuracy: ________ _
Method of Collection: -------------------
**FOR AIR INJECTION AND AQUIFER TEST WELLS ONLY: A FACILITY SITE MAP WITH PROPERTY
BOUNDARIES MAY BE SUBMITTED IN LIEU OF GEOGRAPHIC COORDINATES.
G. TREATMENT AREA
Land surface area of contaminant plume: 100
Land surface area of inj. well network: 100
Percent of contaminant plume area to be treated: 100
square feet
square feet (:5 10,000 ft2 for small-scale injections)
(must be::: 5% of plume for pilot test injections)
H. INJECTION ZONE MAPS -Attach the following to the notification.
(1) Contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the
contaminant plume in soil and groundwater, existing and proposed monitoring wells, and existing and
proposed injection wells; and
(2) Cross-section(s) to the known or projected depth of contamination that show the horizontal and vertical
extent of the contaminant plume in soil and groundwater, changes in lithology, existing and proposed
monitoring wells, and existing and proposed injection wells.
Deemed Pem1itted GW Remediation NOI Rev. 3-21-2018 Page 2
..
(3) Potentiometric surface map(s) indicating the rate and direction of groundwater movement, plus existing
and proposed wells. ·
I. . DESCRIPTION OF PROPOSED INJECTION ACTIVITIES -Provide a brief narrative regarding the
purpose, scope, and goals of the proposed injection activity. This should include the rate, volume, and duration
of injection over time.
To remove residual LNAPL from monitoring wells RWl 9-01 , R Wl 9-03 and RWl 9-07. The process will consist
of placin!'.! a 4:1 mixture of surfactant into the well. Usinrr a surge block the surfactant will be worked from the
well anulus into the filter pack and ad jacent formation. After 24-48 hours the wells will be purged until cl~ar, a
minimum of5 times volume. Pur1w water will be placed in 55 e.allons drums and dis posed as IDW.
, I
J. APPROVED INJECTANTS -Provide a MSDS for each injectant (attach additional sheets if necessary).
NOTE: Only irefectants approved by the NC Division of Public Health, Department of Health and Human
Services i::an be iryected. Approved iryectants can be found online at htt p://deg .nc.1wv/about/divisions/water-
resources/water-resources-permits/wastewater-branch/ground-water-protection/e:round-water-a pproved-in jectants.
All other substances must be reviewed by the DHHS prior to use. Contact the UIC Program for more info (919-
807-6496).
Injectant: Petrosolv __________________________ _
Volume ofinjectant: 4:1 rato based on well volume __________________ _
Concentration at point of injection: 25% ______________________ _
Percent if in a mixture with other injectants: ____________________ _
Injectant: ----------------------------------
Volume ofinjectant: _____________________________ _
Concentration at point of injection: _______________________ _
Percent if in a mixture with other injectants: ____________________ _
Injectant:
Volume ofinjectant: _____________________________ _
Concentration at point of ittjection: _______________________ _
Percent if in a mixture with other injectants: ____________________ _
K. WELL CONSTRUCTION DATA
(1)
(2)
Number ofinjection wells: ______ Proposed ___ 3 ___ Existing (provide GW-ls)
For Proposed wells or Existing wells not ~aving GW-ls, provide well construction details for each
injection well in a diagram or table format. A single diagram or line in a table can be used for
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page 3
..
•
multiple wells with the same construction details. Well construction details shall include the
following (indicate if construction is proposed or as-built):
(a) Well type as permanent, Geoprobe/DPT, or subsurface distribution infiltration gallery
(b) Depth below land surface of casing, each grout type and depth, screen, and sand pack
( c) Well contractor name and certification number
L. SCHEDULES -Briefly describe the schedule for well construction and injection activities.
Se ptember 2019 , followin g a pproval b y NCDEO
M. MONITORING PLAN -Describe below or in separate attachment a monitoring plan to be used to determine
if violations of groundwater quality standards specified in Subchapter 02L result from the injection activity.
Wells will be gau ged on a quarterl y basis (February. Mav. August and November) for the presence ofLNAPL.
The next groundwater sam pling event will be FY 2024 as determined b v the Tier I NCDEQ and Ft Br~g
members.
N. SIGNATURE OF APPLICANT AND PROPERTY OWNER
Well Owner/A pp licant: "I hereby certify, under penalty of law, that I am familiar with the information
submitted in this document and all attachments thereto and that, based on my inquiry of those individuals
immediately responsible for obtaining said ieformation, I believe that the information is true, accurate and
complete. I am aware that there are significant penalties, including the possibility of fines and imprisonment,
for submitting false information. I agree to construct, operate, maintain, repair, and if applicable, abandon the
~~ ct_r :ated app ~e,q1 ;y~nw w;,h the 15A NCAC 02C 0200 Rule,."
Sig"•ture of Applk~~ Primo, Type Foll N,m, ,.,I Title
Pro perty Owner (if the pro perty is not owned b the Well Owner/A pp licant):
"As owner of the property on which the injection well(s) are to be constructed and operated, I hereby consent to
allow the applicant to construct each injection well as outlined in this application and agree that it shall be the
responsibility of the applicant to ensure that the injection well(s) coriform to the Well Construction Standards
(1 5A NCAC 02C .0200)."
"Owner" means any person who holds the fee or other property rights in the well being constructed. A well
is real property and its construction on land shall be deemed to vest ownership in the land owner, in the
absence of contrary agreement in writing.
Deemed Permitted GW Remediation NO! Rev. 3-21-2018 Page 4
Signature* of Property Owner (if different from applicant) Print or Type Full Name and Title
* An access agreement between the applicant and property owner may be submitted in lieu of a signature on this form.
Please send 1 (one) hard color copy of his NOi along with a copy on an attached CD or Flash Drive at least
two (2) weeks prior to injection to:
DWR -UIC Program
1636 Mail Service Center
Raleigh, NC 27699-1636.
Telephone: [phone]
Deemed Permitted GW Remediation NOi Rev. 3-21-2018 Page 5
Date Installed
Date Water Level Well Casing Screened Interval
WellID (m/dd/yy) Measured Depth (ft BGS) (ftBGS)
(m/dd/yy)
RWl9-0I 1/31/2005 -II 11.0-26.0
JlWl'l-l R 8124/2018 II 11.0-26.0
R\1/19-02 12/1/2008 8/24/2018 II 11 .0-26.0
RW-19.:03 12i13/2005 8.'24/2018 II 11.0-26.0
R\1/19-04 12/13/2005 -II 11.0-26.0
RW19-04R 8/24/2018 11 ll .0 -26.0
R\1/19-05 12/13/2005 8/24/2018 11 11 .0 -26.0
R WI Q-Ob 12/13/2005 8/2412018 11 11.0-26.0
R W19-07 IY I J /'2005 8124/2018 II 11 0-2<>.0
R\1/19-08 12/13/2005 8/24/2018 II 11.0-26.0
RW l ~-0'1 12/1 3/2005 8/24/2018 II 11.0-26.0
RWl9-IO 12/13/2005 8/24/2018 II 11.0-26.0
R\1/19-11 12/13/2005 8/24/2018 11 11.0-26.0
RW l'l-12 !0/14/20IO 8/24/2018 9,5 9.5-24.5
RW IQ-IJ tu 14."2010 8/24/2018 9,5 9,5-24.5
R\1/19-14 11/15/2011 8/24/2018 lO 10.0-25.0
RW19-15 11/15/2011 8/24/2018 lO 10.0-25.0
RW19-l6 11/15/2011 8/24/2018 10 10 .0-25.0
RW19-17 11/15/2011 8/24/2018 15 15.0-25.0
RW19-18 11/15/2011 8/24/2018 10 10.0-25.0
TW19-0I 3/20/2003 -16 16.0-26.0
TW19-02 5/6/2003 20 20.0-32.0
TW19-03 5/5/2003 -NA 20.0-32.0
TW19-04 12/13/2004 -NA 10.0-25.0
TW19-05 12/13/2004 -NA 10 .0 -25 .0
TW19-06 12/13/2004 -11.6 11.6-26.6
TW19-07 12/13/2004 -10 10.0-25.0
TWl9-08 12/14/2004 -10 10.0-25.0
TW19-09 12/14/2004 -10 10.0-25.0
TW19-IO 12/14/2004 --lO 10.0-25.0
TW19-11 12/14/2004 --lO 10.0-25.0
TW19-l2 12/14/2004 -10 10.0-25.0
TW19-13 12/15/2004 -8 8.0-23.0
TWl9-14 3/4/2005 -13 13 .0-28.0
TW19-15 3/4/2005 -10 10 .0-25.0
• Reference Point for Elevation Measurements USGS Survey Monument HA RP 1987. AH elevations in ft me:in sea level.
Table I
Monitoring and Remediation Well Construction Informntion
FTBR-310
Fort Brngg, Fayetteville, North Carolina
Bottom of Well TopofC8f!ini: Depth to Water
(ft. TOC) Elevation• (ft.) from Top of
Casing (ft.)
25.25 195.97 -
NA NA l8Jl7
21.19 196.03 17.78
!6,1 196.09 171!6
~6 ~ 196.38 -
NA NA 17.86
27.2 196.13 16.95
NA 196.23 19.38
NA 1%.25 19 43
NA 196.32 19.40
26.3 196.09 19.21
NA 196.03 19.40
27.6 196.78 18.67
24.32 194.89 17.83
23.6 195 .23 18.70
NA 194 .6 18.79
NA 194.7 5 18.29
NA 195 .11 18.49
NA 195.53 18.76
NA 194.69 18.60
NA 194.6 5 ·-
NA 197.18 --
NA 195 .72 --
NA 195.00 --
NA 194.97 -
25.2 194.92 -
NA 194.94 -
NA 195 ,59 -
25.1 194·.70 --
25 .23 194.88 --
NA 194.99 --
25 194.8 9 -
NA 195 .23 -
NA 195 .58 -
25.13 193.59 -
** If free product is present in a well, groundwater elevation should be calculated by: [Top of Casing Elevation -Depth to Water] + [free product thickness x 0.8581]
ft BGS = feet below ground surface
NA=NotAvailable
1/1
Free Product Ground-water
Thickness•• (ft.) Elevation* (ft.) Comments
--1Jc$rniyc,J
0 .00 NA ---.,; ·-lnslalled 6i22;2017
0.00 178.25
0.00 178.23 .. -Destro,•ed
0.00 NA Installed 6/22/2017
0.00 179.18
0.00 176.85
0.00 17'1 .82
0,00 176.'>2
0.22 17707
0,00 1'1~o,
0.00 178.11
0.00 177 06
0.00 176.53
0.22 176.00 Ln,mlled rn v1crn11y offonnerTW19-06 well
0.00 176.46 lnstnllecl ,n v1CJmlV of fonnerTW19-09 well
0.00 176 .62 lnstnllecl 10 vicrnirv offonnerTW19-10 well
0.00 176.77 Installed as u n~radient well southeast of former T\1/19-11
0.00 176.09 Install ed between former wells TW19-l I and TW19-15
--Proocrlv abandoned on I 1/15/2011 --I Unab le III locate. Remains as side-i,radient monitorilll( point.
--Destroyed hv Bld;,. 822 excavation activities in 2008 --Otsrroved bv Bid,,. 822 excavation activities in 2008
--Destroved bv BldP. 822 excavation activities in 2008
--Propc:rlv abandoned on 11/15/2011
--i'moc:rlv abandoned on 11/15/2011
--De:;trovd bv BldR. 822 excavation activities in 2008
---Proocrlv abandoned on 11/15/2011
---l'roocrlv abandoned on 11/15/20 II
--f'roncrlv abandoned on 11/15/2011
--Pr auei t, abandoned on 11/15/2011 --Pmm,rl~ abandoned on 11/15/2011
--rmuc:rlv abandoned on 11/15/2011
--Proncrlv abandoned on 11 /15/20 II
Advanced
ETEC Biorernediation
Solutions
Safety Data Sheet
3830 S Truman Rd. Bldg. 12
Washougal, Washington 98671
[phone] Fax
wWw.eteclic.com
Revision Date: 05/19/2017
Section 1: Product and Company Identification
Product Name:
MSDS Number:
Chemical Name:
Chemical Family:
Recommended Use:
Restrictions on Use:
Company:
PetroSolvTM
016
Mixture
Ethoxylated surfactant mixture
Biosurfactant
No Data
ETEC, LLC
3830 5 Truman Rd. Bldg. 12
Washougal, WA 98671
USA
Telephone: [phone]
Emergency Telephone: [phone]
Medical Emergencies: [phone]
U.S. Coast Guard National
Response Center: [phone]
Section 2: Hazards Identification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200)
Serious Eye Damage
Category 1
Label Elements:
Signal Word: Danger
4Eflv\>
Hazard Statements:
Causes serious eye damage.
Precautionary Statements:
Revision Date: 05/19/2017 Page 1 of 7

Safety Data Sheet PetroSolv™
Wash face and hands thoroughly after handling.
Wear protective gloves/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
Collect spillage.
Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS -none
Section 3: Composition/lnform~tion on Ingredients
Ingredients as defined by 29 CFR 1910.1200:
Chemical In redients: CAS Number:
Trade Secret
Percent Ran e:
30-40%
The specific chemical identity and/or exact percentage of the composition has been withheld as Trade
Secret in accordance with paragraph (i) of §1910.1200.
Section 4: First Aid Measures
Description of first aid measures:
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, give artificial respiration.
Skin Contact: Wash with plenty of soap and water. Take off contaminated clothing and wash
before reuse.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical advice/attention.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: See sections 2 and/or 11.
Indication of any immediate medical attention and special treatment needed: No data available.
Sec;:tion 5: Fire Fighting Measures
Suitable Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Unsuitable Extinguishing Media: No known information.
Specific Hazards Arising from the chemical/substance: Thermal decomposition can lead to release of
irritating gases and vapors.
Hazardous Combustion Products: Phosphorus oxides. Sodium oxides. Carbon Oxides.
Revision Date: 05/19/2015 Page 2 of 7
Safety Data Sheet PetroSolv™
Protective Equipment and Precautions for Fire-Fighters: As in any fire, wear self-contained breathing
apparatus and full protective gear ..
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Ensure adequate
ventilation. Use personal protective equipment. Avoid dust formation. Do not breathe
dust/fume/gas/mist/vapors/spray.
Environmental Precautions: Do not flush to surface water. See section 12 for further environmental
data.
Methods for ContainmenUCleaning Up: Soak up with non-combustible absorbent. Pick up and transfer
to properly labeled containers. Ventilate area and wash spill site after material pickup is complete.
Section 7: Handling and Storage
Precautions for Safe Handling: Avoid breathing mists or vapors. Use only in a well-ventilated area.
Wash thoroughly after handling. Keep out of reach of children. Handle in accordance with good
industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities:
Storage: Keep in tightly closed container, store in a cool, dry, ventilated place. Store at
temperatures not exceeding 130°F (54°C).
Section 8: Exposure Controls/Personal Protection
Exposure Limits: There are no OSHA PEL's, NIOSH REL's, or ACGIH TLV's applicable to this material.
Engineering Controls: Ensure adequate ventilation, especially in confined areas. Ensure that eyewash
stations and safety showers are close to the workstation location.
Personal Protective Equipment:
Eye Protection: Wear appropriate eye protection/face protection.
Hand Protection: Wear appropriate protective gloves.
Skin and Body Protection: Wear appropriate protective clothing to prevent skin exposure.
Take off contaminated clothing and wash before reuse.
Respiratory Protection: Use only in a well-ventilated area. Avoid breathing dust. Wear
appropriate NIOSH approved respirator if exposure limits are exceeded or irritation occurs.
Hygiene Measures: Wash thoroughly after handling. Handle in accordance with good industrial hygiene
and safety practice.
Section 9: Physical and Chemical Properties
Revision Date: 05/19/2015 Page 3 of 7
Safety Data Sheet
Appearance/Physical State:
Color:
Odor:
Odor Threshold:
pH:
Melting/Freezing Point:
Initial Boiling Point:
Flash Point:
Evaporation Rate:
Flammability (solid, gas):
Lower Explosive Limit:
Upper Explosive Limit:
Vapor Pressure:
Vapor Density:
Relative Density:
Solubility:
Partition Coefficient:
Autoignition Temperature:
Decomposition Temperature:
Liquid
Clear to slightly hazy tan color
Slight to none
Not Available
6.5
Not Available
Not Available
Not Available
1.20
Not Available
Not Available
Not Available
Not Available
Not Available
1.00
Complete solubility in water
Not Available
Not Available
Not Available
Section 10: Stability and .Reactivity
Reactivity: No information available.
Stability: Stable under ordinary conditions of use and storage.
Possibility of hazardous reactions: No information a'(ailable.
Conditions to Avoid: Extremes in temperature and direct sunlight.
Incompatible Materials: Strong oxidizing agents, strong acids.
PetroSolv™
Hazardous Decomposition Products: Other decomposition products -No data available. In
case of fire: see section 5.
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Information on Likely Routes of Exposure:
Inhalation:
Ingestion:
Skin Contact:
Eye Contact:
Toxicity Data:
Chemical Name
Trade Secret
No information available.
No information available.
No information available.
Risk of serious damage to eyes.
LD50ORAL
No data
Symptoms: No information available.
Revision Date: 05/19/2015
LD50 DERMAL LC50 INHALATION
No data No data
Page4 of 7
Safety Data Sheet PetroSolv™
Delayed and Immediate Effects, Chronic Effects from Short and Long Term Exposure:
Sensitization:
Mutagenic Effects:
Reproductive Toxicity:
STOT -Single Exposure:
STOT -Repeated Exposure:
Aspiration Hazard:
Chronic Exposure:
Aggravation of Pre-existing Conditions:
Carcinogenicity :
Com onent CAS NTP
Trade Secret N/A Not listed
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
IARC
Not listed
OSHA
Not listed
Additional Information: To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Section 12: Ecological Information
Ecotoxicity:
This product is safe for the environment at the concentrations predicted under normal use conditions.
Persistance and Degradability: No information available.
Bioaccumulative Potential: No information available.
Mobility in Soil: No information available.
Other Adverse Effects: No information available.
Section 13: Disposal Considerations
Dispose of contents/container in accordance with all applicable local, state and federal regulations.
Section 14: Transport Information
For Transportation Emergencies Involving This Material, Call:
ChemTrec 1-800-424-9300 Company Code: E419
DOT (LAND): Not regulated.
Section 15: Regulatory Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title Ill,
Section 302.
Revision Date: 05/19/2015 Page 5 of 7
Safety Data Sheet PetroSolv™
SARA 311/312 Hazard Categories:
Acute Health Hazard Yes
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard No
SARA 313: This material does not contain any chemical components with known CAS numbers that
exceed the threshold (De Minimis) reporting levels established by SARA Title Ill, Section 313.
State Ri ht-to-Know:
Com onent Massachusetts NewJerse Penns lvania Illinois Rhode Island
Trade Secret .-X ·X
TSCA: Not Applicable
California Prop. 65 Components: This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm.
Section 16: Other Information
NFPA Rating:
Health Hazard: 1
Fire: 0
Reactivity Hazard: 0
Legend:
ACGIH: American Conference of Governmental & Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSUNDSL: Domestic Substances List/Non-Domestic Substances List
IARC: International Agency for the Research of Cancer
IATA: International Air Traffic Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organizations
NFPA: National Fire Protection Association Health, Flammability & Reactivity; Hazard Scale 0
=minimal/none 4= significant
NTP: National Toxicology Program
OSHA: Occupational Safety & Health Administration
PEL: Permissible Exposure Limits
RCRA: Resource Conservation & Recovery Act
RQ: Reportable Quantity
RTK: Right-To-Know
SARA: Superfund Amendments & Reauthorization Act
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
Revision Date: 05/19/2015 Page 6 of 7
Safety Data Sheet
TCLP: Toxicity Characteristic Leaching Procedure
VOC: Volatile Organic Compounds
PetroSolv™
Disclaimer: The information contained in this SDS is presented in good faith and believed to be accurate
based on the information provided. The SDS does not purport to be all inclusive , and shall be used only
as a guide. While ETEC, LLC believes that the data contained herein comply with 29 CFR 1910.1200,
they are not to be taken as a warranty or representation for which ETEC , LLC assumes legal
responsibility . ETEC, LLC shall not be held liable or accountable for any loss or damage associated with
the use of this material and information. The recommended industrial hygiene and safe use, handling,
storage, and disposal procedures are believed to be generally applicable . However, since the use,
handling, storage, and disposal are beyond ETEC, LLC control, it is the responsibility of the user both to
determine safe conditions for use of this product and to assume liability of loss, damage, or expense
arising out of the material's improper use.
Revision Date: 05/19/2015 Page 7 of 7
North Carolina Department of Environmental Quality -Division of Water Resources
NOTIFICATION OF INTENT (NOi) TO CONSTRUCT OR OPERATE INJECTION WELLS
The following are ''permitted by rule" and do not require an individual permit when constructed in accordance
with the rules of 15A NCAC 02C .0200 (NOTE: This form must be received at least 14 DAYS prior to injection)
AQUIFER TEST WELLS (15A NCAC 02c .0220)
These wells are used to inject uncontaminated fluid into an aquifer to determine aquifer hydraulic characteristics.
IN SITU REMEDIATION O5A NCAC 02C .0225) or TRACER WELLS (15A NCAC 02C .0229}:
1) Passive Injection S ystems -In-well delivery systems to diffuse injectants into the subsurface. Examples include
ORC socks, iSOC systems, and other gas infusion methods (Note: Injection Event Records (IER) do not need to be
submitted for replacement of each sock used in ORC systems).
2) Small-Scale Injection O perations -Injection wells located within a land surface area not to exceed 10,000
square feet for the purpose of soil or groundwater remediation or tracer tests. An individual permit shall be required
for test or treatment areas exceeding 10,000 square feet.
3) Pilot Tests -Preliminary studies conducted for the purpose of evaluating the technical feasibility of a
remediation strategy in order to develop a full scale remediation plan for future implementation, and where the
surface area of the injection zone wells are located within an area that does not exceed five percent of the land
surface above the known extent of groundwater contamination. An individual permit shall be required to conduct
more than one pilot test on any separate groundwater contaminant plume.
4) Air Injection Wells -Used to inject ambient air to enhance in-situ treatment of soil or groundwater.
Print Clearly or Type Information. Illegible Submittals Will Be Returned As Incomplete.
DATE: 19 Aug ust
byDWR)
,20_19_ PERMIT NO. ________ (to be filled in
A. WELL TYPE TO BE CONSTRUCTED OR OPERATED
(1)
(2)
(3)
(4)
(5)
(6)
___ Air Injection Well ...................................... Complete sections B through F, K, N
___ Aquifer Test Well ....................................... Complete sections B through F, K, N
___ Passive Injection System ............................... Complete sections B through F, H-N
X_Small-Scale Injection Operation ...................... Complete sections B through N
--~Pilot Test ................................................. Complete sections B through N
___ Tracer Injection Well ...................... _. ............ Complete sections B through N
B. STATUS OF WELL OWNER: Choose an item.
C. WELL OWNER(S) -State name of Business/Agency, and Name and Title of person delegated authority to
sign on behalf of the business or agency:
Name(s): Monica A .. Stephenson, Directorate of Public Works
Mailing Address: IMBG-PWE_M, 4-2175 Reilly Road Stop A
City: Fort Bragg State:_ NC Zip Code: 28310-5000 County: Cumberland
DayTeleNo.: 910-396-4009 CellNo.: NA. ________ _
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page 1
EMAIL Address: [e-mail] Fax No.: 910-396-4009_
D. PROPERTY OWNER(S) (if different than well owner/applicant)
Name and Title: Same as Above. ________________________ _
Company Name ---------------------------------
Mailing Address:---------------------------------
City: _____________ State: __ Zip Code:. _______ County,__: _____ _
DayTeleNo.: ____________ _ Cell No.: __________ _
EMAIL Address:. _____________ _ Fax No.: ___________ _
E. PROJECT CONTACT (Typically Environmental Engineering Firm)
Name and Title: Renee Hill, Geologist. ________________________ _
Company Name US Army Corp of Engineers, Savannah District. _____________ _
Mailing Address: 100 West Oglethorpe Ave. _______________________ _
City: Savannah~-----State:_ GA_ Zip Code: 31401 ___ County:_,C=h=a=th=am=.o.... ____ _
Day Tele No.: 912-652-5671 ____ Cell No.:~9"""'1'-=2'-'-6""'7'--'7-'-6""0'-'7..:c.1 _____ _
EMAIL Address: alison.r:[e-mail], ____ _ FaxNo.: 912-652-5311 _____ _
F. PHYSICAL LOCATION OF WELL SITE
(1) Facility Name & Address: Site: CCFTBR0037 . Ft Bragg. NC
City: Fort Brag,c,_ _______ County: Cumberland Zip Code: 28310-5000
(2) Geographic Coordinates: Latitude**: ___ 0 --__ " or 0
Longitude**: "or 0
Reference Datum: ________ Accuracy: ________ _
Method of Collection ,_: _________________ _
**FOR AIR INJECTION AND AQUIFER TEST WELLS ONLY: A FACILITY SITE MAP WITH PROPERTY
BOUNDARIES MAY BE SUBMITTED IN LIEU OF GEOGRAPHIC COORDINATES.
G. TREATMENT AREA
Land surface area of contaminant plume: 100
Land surface area of inj. well network: 100
Percent of contaminant plume area to be treated: 100
square feet
square feet(::: 10,000 ft2 for small-scale injections)
(must be::: 5% of plume for pilot test injections)
H. INJECTION ZONE MAPS -Attach the following to the notification.
(1) Contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the
contaminant plume in soil and groundwater, existing and proposed monitoring wells, and existing and
proposed injection wells; and
(2) Cross-section(s) to the known or projected depth of contamination that show the horizontal and vertical
extent of the contaminant plume in soil and groundwater, changes in lithology, existing and proposed
monitoring wells, and existing and proposed injection wells.
Deemed Permitted GW Remediation NOi Rev. 3-21-2018 Page 2
(3) Potentiometric surface map(s) indicating the rate and direction of groundwater movement, plus existing
and proposed wells.
I. DESCRIPTION OF PROPOSED INJECTION ACTIVITIES. -Provide a brief narrative regarding the
purpose, scope, and goals of the proposed injection activity. This should include the rate, volume, and duration
of injection over time.
To remove residual LNAPL from monitoring wells P-6718-MWlC andP6718-MwlA. The process will consist
of placing a 4:1 mixture of surfactant into the well. Using a sur ge block the surfactant will be worked from the
well anulus into the filter pack and adjacent formation. After 24-48 hours the wells will be purged until clear. a
minimum of 5 times volume. Puree water will be placed in 55 f!allons drums and dis posed as IDW.
J. APPROVED INJECTANTS-Provide a MSDS for each injectant (attach additional sheets if necessary).
NOTE: Only injectants approved by the NC Division of Public Health, Department of Health and Human
Services can be injected. Approved irifectants can be found online at http ://deg.nc.e.ov/about/divisions/water-
resources/water-resources-permits/wastewater-branch/1nound-water-protection/ground-water-a poroved-in jectants.
All other substances must be reviewed by the DHHSprior to use. Contact the UIC Program for more info (919-
807-6496).
Injectant: Petrosolv __________________________ _
Volume of injectant: 4:1 rato based on well volume __________________ _
Concentration at point of injection: 25%. ______________________ _
Percent if in a mixture with other injectants: ____________________ _
Injectant: ----------------------------------
Volume ofinjectant:
Concentration at point of injection: _______________________ _
Percent ifin a mixture with other injectants:
Injectant:
Volume ofinjectant: _____________________________ _
Concentration at point of injection: _______________________ _
Percent if in a mixture with other injectants: ____________________ _
K. WELL CONSTRUCTION DATA
(1) Number of injection wells: ----~Proposed ___ 2 __ ~Existing (provide GW-ls)
(2) For Proposed wells or Existing wells not having GW-ls, provide well construction details for each
injection well in _a diagram or table format. A single diagram or line in a table can be used for
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Piige3
multiple wells with the same construction details. Well construction details shall include the
following (indicate if construction is proposed or as -built):
(a) Well type as permanent, Geoprobe/OPT, or subsurface distribution infiltration gallery
(b) Depth below land surface of casing, each grout type and depth, screen, and sand pack
(c) Well contractor name and certification number
L. SCHEDULES —Briefly describe the schedule for well construction and injection activities.
Seutenxber 2019. followinu approval by NCDEQ
M. MONITORING PLAN — Describe below or in separate attachment a monitoring plan to be used to determine
if violations of groundwater quality standards specified in Subchapter 02L result from the injection activity.
Wells will be vauved on a quarterly basis (February, May. Aueust and Novemberi for the presence of LNAPL.
The next groundwater sampling event will be FY 2024 as determined by the Tier I NCDEO and Ft Brat.,
members.
N. SIGNATURE OF APPLICANT AND PROPERTY OWNER
Well Owner/Applicant: "I hereby cert under penalty of law, that I am familiar with the information
submitted in this document and all attachments thereto and that, based on my inquiry of those individuals
immediately responsible for obtaining said information, I believe that the information is true, accurate and
complete. I am aware that there are significant penalties, including the possibility of fines and imprisonment,
for submitting false information. Iagree to construct, operate, maintain, repair, and ifapplicable, abandon the
jfection well and all related appurtenances in accordance with the I SA NCAC 02C 0200 Rules."
Signature of Applicant
Print or Type Full Name and Title
Property. Owner (if the property is not owned by the Well Owner/Ajjiieantl;
"As owner of the property on which the injection well(s) are to be constructed and operated, Ihereby consent to
allow the applicant to construct each injection well as outlined in this application and agree that it shall be the
responsibility of the applicant to ensure that the injection well(s) conform to the Well Construction Standards
(15A NCAC' 02C .0200)."
"Owner" means any person who holds the fee or other property rights in the well being constructed. A well
is real property and its construction on land shall be deemed to vest ownership in the land owner, in the
absence of contrary agreement in writing.
Deemed Pennitted GW Remediation NO1 Rev_ 3-21-20I8
Page 4

Signature* of Property Owner (if different from applicant) Print or Type Full Name and Title
* An access agreement between the ·applicant and property owner may be submitted in lieu of a. signature on this form.
Please send 1 (one) hard color copy of his NOi along with a copy on an attached CD or Flash Drive at least
two (2) weeks prior to injection to:
DWR -UIC Program
1636 Mail Service Center
Raleigh, NC 27699-1636
Telephone: [phone]
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page 5
Date Installed Date Water Level Well ID Measured
P-6718-MWt-07 (1 .25") 10'2912006 --
P-6718-MWIA (4") 01/08/20 14 08/27/2018
P-6718-MWlB (4") 01/08/2014 08/27/2018
P-67t8--:VtWH ' (4") Ol!08!Wl4 ,_jl_lV'--71.2018.
P-6718-MW2-07 (1.25") 10/Jl/2006 08/27/2018
P-6718-MWl-07 (1,25") 10/31 /2006 08/27/2018
P-6718-MW4-07 (1.25") 10/31/2006 08/2712018
P-6718-MW5-07 (1,25") 10/31/2006 .08/27/2018
P-6718-OWSI-MW 10/27/2006 08/27/2018
SAF MW 7 A (6"). 10/24/1 994 08/27/2018
SAF MW 7 B (6") NA 08/27/2018
SAFMW7C(4") NA 08/27/2018
SAFMW9(4") 10/26/1 994 06/15/2011
SAF MW 14S (2") 07/1 5/1996 08/27/2018
SAF MW 14M (2") 07/1 6/1 996 08/27/2018
SAF MW -16 (2") 07/23/1996 08/27/2018
SAF MW 17R (4") 01/12/2008 08/27/2018
SAF MW 18 (2") 07/23 /1996 08/27/201 8
SAFMW-22 07/26/1 996 08/27/2018
SAFMW-23 07/29/1 996 08/27/2018
SAFMW-24S 07/09/1 996 08/27/2018
SAFMW-24M 07/09/1996 08/27/2018
SAFMW-24D 07109/1996 08/27/2018
SAFMW-26 07/19/1 996 06/15/2011
SAFMW-27 07/19/1996 15/06/2011
Notes:
* Reference Point of Elevation Measurements msl.
Table 1
Monitoring and Remediation Well Construction Information
CCFTBR0037 (SAAF Hydrant)
Fort Bragg, North Carolina
Screened Bottom ofWell Top or Cosing Depth to
lnten·ol (x toy (ftbg,) Elevation• (fl) \Voter ti-om top of
ft "81) Casing(ft)
16.0 -26.0 26.5 235.99 --
161!-2~ 2"538 2311.5 7 ~ !I SO
16.0-26.0 25.40 240.16 21.58
16 0-26.0 :!8 0'.:1 2.18 83 -20~~
16.8 -26.8 !73 235.52 17.73
17.0-27.0 27.5 i36.08 18.07
31.8 -36 .8 37.3 235.65 17.79
20.8-308 30.9 238.12 21.23
18 .0 - 28 .0 28.4 238.25 20.16
16.0-26.0 30.0 237.48 19.33
NA NA NA NA
NA NA NA NA
16.5 -26.5 27.9 236.98 --
15 .5 -25 .0 27.8 239.77 22.88
30.7-35.7 38.8 239.57 22.77
15.7-25.7 26.0 239.59 21.93
14.9 -34.9 35.4 238.05 21.45
14.0-24.0 34.0 235.1 0 17 .29
17 .0 -27.0 30.0 240.51 22.58
15.0 -25.0 24.9 236.82 18.83
13.0 -23.0 37.0 243.57 19.85
31.0 -36.0 37.0 243.53 25.78
47 .0-52 .0 53 .0 243 .94 26.30
13 .7-23.7 24.5 232.08 --
13.7 -23 . 7 24.5 232.77 --
•• If free product is present in a well, ground-water elevation should be calculated bv: JTop of Casing Elevation -Depth to Waterl + [free product thickness x 0 .85811.
ft bgs = feet below ground surface.
1/1
Free Product Ground-WAier
Thickneu•• (ft) Elevation• (ft) Comments
Abandoned on 01/09/14 and repl aced with P-
----6718-MWlA, P-67 18-MWlB, and P-6718-
MWlC.
017 : ,~ 22
0.00 218.58
OOS) ·21ft M
0.0 1 2 17.80
0.00 21 8 .01
0.00 217.86
0.00 21 6.89
0.00 218 .09
0.0 0 218.15
0.00 --
0.00 --
----Destroyed by construction
0.00 21 6.89
0.00 216.80
0.00 217.66
0.00 216.60
0.00 217.8 1
0.00 217.93
0.00 217.99
0.00 223.72
0.00 217.75
0.00 217 .64
---Oestroyed by construction
----Destroyed by construction
Advanced
ETEC Bioremediatiori
No' Solutions
Safety Data Sheet
3830 S Truman Rd. Bldg. 12
Washougal, Washington 98671
[phone] Fax
www.etecllc.com
Revision Date: 05/19/2017
Section 1: Product and Company Identification
Product Name:
MSDS Number:
Chemical Name:
Chemical Family:
Recommended Use:
Restrictions on Use:
Company:
PetroSolvTM
D16
Mixture
Ethoxylated surfactant mixture
Biosurfactant
No Data
ETEC, LLC
3830 S Truman Rd, Bldg. 12
Washougal, WA 98671
USA
Telephone: [phone]
Emergency Telephone: [phone]
Medical Emergencies: [phone]
U.S. Coast Guard National
Response Center: [phone]
Section 2: Hazards Identification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200j
r Serious Eye Damage
Label Elements:
Signal Word: Danger
Category 1
Hazard Statements:
Causes serious eye damage.
Precautionary Statements:
Revision Date' 05/19/2017 Page 1 of 7

Safety Data Sheet PetroSolv™
Wash face and hands thoroughly after handling.
Wear protective gloves/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
Collect spillage.
Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not coveted by GHS -none
Section 3: Composition/Information on Ingredients
Ingredients as defined by 29 CFR 1910.1200:
Chemical In redients: CAS Number:
Trade Secret
Percent Ran e:
30-40%
The specific chemical identity and/or exact percentage of the composition has been withheld as Trade
Secret in accordance with paragraph (i) of§ 1910. 1200.
Section 4: First Aid Measures
Description of first aid measures:
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, give artificial respiration.
Skin Contact: Wash with plenty of soap and water. Take off contaminated clothing and wash
before reuse.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical advice/attention.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: See.sections 2 and/or 11.
Indication of any immediate medical attention and special treatment needed: No data available.
Section 5: Fire Fighting Measures
Suitable Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Unsuitable Extinguishing Media: No known information.
Specific Hazards Arising from the chemical/substance: Thermal decomposition can lead to release of
irritating gases and vapors.
Hazardous Combustion Products: Phosphorus oxides. Sodium oxides. Carbon Oxides.
Revision Date: 05/19/2015 Page 2 of 7
Safety Data Sheet PetroSolv™
Protective Equipment and Precautions for Fire-Fighters: As in any fire, wear self-contained breathing
apparatus and full protective gear.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Ensure adequate
ventilation. Use personal protective equipment. Avoid dust formation. Do not breathe
dust/fume/gas/mist/vapors/spray.
Environmental Precautions: Do not flush to surface water. See section 12 for further environmental
data.
Methods for Containment/Cleaning Up: Soak up with non-combustible absorbent. Pick up and transfer
to properly labeled containers. Ventilate area and wash spill site after material pickup is complete.
Section 7: Handling and Storage
Precautions for Safe Handling: Avoid breathing mists or vapors. Use only in a well-ventilated area.
Wash thoroughly after handling. Keep out of reach of children. Handle in accordance with good
industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities:
Storage: Keep in tightly closed container, store in a cool, dry, ventilated place. Store at
temperatures not exceeding 130°F (54 °C).
Section 8: Exposure Controls/Personal Protection
Exposure Limits: There are no OSHA PEL's, NIOSH REL's, or ACGIH TLV's applicable to this material.
Engineering Controls: Ensure adequate ventilation, especially in confined areas. Ensure that eyewash
stations and safety showers are close to the workstation location.
Personal Protective Equipment:
Eye Protection: Wear appropriate eye protection/face protection.
Hand Protection: Wear appropriate protective gloves.
Skin and Body Protection: Wear appropriate protective clothing to prevent skin exposure.
Take off contaminated clothing and wash before reuse.
Respiratory Protection: Use only in a well-ventilated area. Avoid breathing dust. Wear
appropriate NIOSH approved respirator if exposure limits are exceeded or irritation occurs.
Hygiene Measures: Wash thoroughly after handling. Handle in accordance with good industrial hygiene
and safety practice.
Section 9: Physical and Chemical Properties
Revision Date: 05/19/2015 Page 3 of 7
Safety Data Sheet
Appearance/Physical State:
Color:·
Odor:
Odor Threshold:
pH:
Melting/Freezing Point:
Initial Boiling Point:
Flash Point:
Evaporation Rate:
Flammability (solid, gas):
Lower Explosive Limit:
Upper Explosive Limit:
Vapor Pressure:
Vapor Density:
Relative Density:
Solubility:
Partition Coefficient:
Autoignition Temperature:
Decomposition Temperature:
Liquid
Clear to slightly hazy ta.n color
Slight to none
Not Available
6.5
Not Available
Not Available
Not Available
1.20
Not Available
Not Available
Not Available
Not Available
Not Available
1.00
Complete solubility in water
Not Available
Not Available
Not Available
Section 10: Stability and Reactivity
Reactivity: No information available.
Stability: Stable under ordinary conditions of use and storage.
Possibility of hazardous reactions: No information available.
Conditions to Avoid: Extremes in temperature and direct sunlight.
Incompatible Materials: Strong oxidizing agents, strong acids.
PetroSolv™
Hazardous Decomposition Products: Other decomposition products -No data available. In
case of fire: see section 5.
Hazardous Polymerization: Will not occur.·
Section 11: Toxicological Information
Information on Likely Routes of Exposure:
Inhalation:
Ingestion:
Skin Contact:
Eye Contact:
-Toxicity Data:
Chemical Name
Trade Secret
No information available.
No information available.
No information avail~ble.
Risk of serious damage to eyes.
LOSO ORAL
No data
Symptoms: No information available.
Revision Date: 05/19/2015
LDS0 DERMAL LCS0 INHALATION
No data No data
Page 4 of 7
Safety Data Sheet PetroSolv™
Delayed and Immediate Effects, Chronic Effects from Short and Long Term Exposure:
Sensitization:
Mutagenic Effects:
Reproductive Toxicity:
STOT -Single Exposure:
STOT -Repeated Exposure:
Aspiration Hazard:
Chronic Exposure:
Aggravation of Pre-existing Conditions:
Carcino genicity:
Com anent CAS NTP
Trade Secret N/A Not listed
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
IARC
Not listed
OSHA
Not listed
Additional Information: To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Section 12: Ecological Information
Ecotoxicity:
This product is safe for the environment at the concentrations predicted under normal use conditions.
Persistance and Degradability: No information available.
Bioaccumulative Potential: No information available.
Mobility in Soil: No information available.
Other Adverse Effects: No information available.
Section 13: Disposal Considerations
Dispose of contents/container in accordance with all applicable local, state and federal regulations.
Section 14: Transport Information
For Transportation Emergencies Involving This Material, Call:
ChemTrec 1-800-424-9300 Company Code: E419
DOT (LAND): Not regulated.
Section 15: Regulatory Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title 111,
Section 302.
Revision Date: 05/19/2015 Page 5 of 7
Safety Data Sheet PetroSolv™
SARA 311/312 Hazard Categories:
Acute Health Hazard Yes
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard No
SARA 313: This material does not contain any chemical components with known GAS numbers that
exceed the threshold (De Minimis) reporting levels established by SARA Title Ill, Section 313.
State Ri ht-to-Know:
Com onent Massachusetts NewJerse Penns lvania Illinois Rhode Island
Trade Secret X X
TSCA: Not Applicable
California Prop. 65 Components: This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm .
Section 16: Other Information
NFPA Rating:
Health Hazard: 1
Fire: 0
Reactivity Hazard: 0
Legend:
ACGIH: American Conference of Governmental & Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSUNDSL: Domestic Substances List/Non-Domestic Substances List
IARC: International Agency for the Research of Cancer
IATA: International Air Traffic Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organizations
NFPA: National Fire Protection Association Health, Flammability & Reactivity; Hazard Scale 0
=minimal/none 4= significant
NTP: National Toxicology Program
OSHA: Occupational Safety & Health Administration
PEL: Permissible Exposure Limits
RCRA: Resource Conservation & Recovery Act
RQ: Reportable Quantity
RTK: Right-To-Know
SARA: Superfund Amendments & Reauthorization Act
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
Revision Date: 05/19/2015 Page 6 of 7
Safety Data Sheet
TCLP: Toxicity Characteristic Leaching Procedure
VOC: Volatile Organic Compounds
PetroSolv™
Disclaimer: The information contained in this SDS is presented in good faith and believed to be accurate
based on the information provided . The SDS does not purport to be all inclusive , and shall be used only
as a guide. While ETEC , LLC believes that the data contained herein comply with 29 CFR 1910.1200,
they are not to be taken as a warranty or representation for which ETEC , LLC assumes legal
responsibility. ETEC, LLC shall not be held liable or accountable for any loss or damage associated with
the use of this material and information . The recommended industrial hygiene and safe use, handling,
storage, and disposal procedures are believed to be generally applicable . However, since the use,
handling, storage , and disposal are beyond ETEC, LLC control, it is the responsibility of the user both to
determine safe conditions for use of this product and to assume liability of loss , damage, or expense
arising out of the material's improper use.
Revision Date: 05/19/2015 Page 7 of 7
North Carolina Department of Environmental Quality-Division of Water Resources
NOTIFICATION OF INTENT (NOi) TO CONSTRUCT OR OPERATE INJECTION WELLS
The following are "permitted by rule" and do not require an individual permit when constructed in accordance
with the rules of 15A NCAC 02C .0200 (NOTE: This form must be received at least 14 DAYS prior to injection )
AQUIFER TEST WELLS 05A NCAC 02C .0220)
These wells are used to inject uncontaminated fluid into an aquifer to detennine aquifer hydraulic characteristics.
IN SITU REMEDIATION (15A NCAC 02c .0225 ) or TRACER WELLS (15A NCAC 02c .0229 ):
1) Passive Injection Sv stems -In-well delivery systems to diffuse injectants into the subsurface. Examples include
ORC socks, iSOC systems, and other gas infusion methods (Note: Injection Event Records (IER) do not need to be
submitted for replacement of each sock used in ORC systems).
2) Small-Scale Injection O perations -Injection wells located within a land surface area not to exceed 10,000
square feet for the purpose of soil or groundwater remediation or tracer tests. An individual permit shall be required
for test or treatment areas exceeding 10,000 square feet.
3) Pilot Tests -Preliminary studies conducted for the purpose of evaluating the technical feasibility of a
remediation strategy in order to develop a full scale remediation plan for future implementation, and where the
surface area of the injection zone wells are located within an area that does not exceed five percent of the land
surface above the known extent of groundwater contamination. An individual permit shall be required to conduct
more than one pilot test on any separate groundwater contaminant plume.
4) Air Injection Wells -Used to inject ambient air to enhance in-situ treatment of soil or groundwater.
Print Clearly or Type Information. Illegible Submittals Will Be Returned As Incomplete.
DATE: 19 Au,.rnst
byDWR)
,20_19_ PERMIT NO. ________ (to be filled in
A. WELL TYPE TO BE CONSTRUCTED OR OPERATED
(1)
(2)
(3)
(4)
(5)
(6)
___ Air Injection Well ...................................... Complete sections B through F, K, N
___ Aquifer Test Well ....................................... Complete sections B through F, K, N
___ Passive Injection System ............................... Complete sections B through F, H-N
X_Small-Scale Injection Operation ...................... Complete sections B through N
___ Pilot Test ................................................. Complete sections B through N
___ Tracer Injection Well ................................... Complete sections B through N
B. STATUS OF WELL OWNER: Choose an item.
C. WELL OWNER(S) -State name of Business/Agency, and Name and Title of person delegated authority to
sign on behalf of the business or agency:
Name(s): Monica A. Stephenson, Directorate of Public Works
Mailing Address: IMBG-PWE_M, 4-2175 Reilly Road Stop A
City: Fort Bragg State:_ NC Zip Code: 28310-5000 County: Cumberland
Day Tele No.: 910-396-4009 Cell No.: NA~--------
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page I
EMAIL Address: [e-mail] Fax No.: 910-396-4009_
D. PROPERTY OWNER(S) (if different than well owner/applicant)
Name and Title: Same as Above ________________________ _
CompanyName ---------------------------------
Mailing Address:---------------------------------
City: _____________ State: __ Zip Code: _______ County: _____ _
DayTeleNo.: ____________ _ Cell No.: __________ _
EMAIL Address: _____________ _ Fax No.: ___________ _
E. PROJECT CONTACT (Typically Environmental Engineering Firm)
Name and Title: Renee Hill, Geologist. ________________________ _
Company Name US Army Corp of Engineers, Savannah District ____________ _
Mailing Address: 100 West Oglethorpe Ave ______________________ _
City: Savannah ______ State:_ GA_ Zip Code: 3140l ___ County:_C_h_a_th_am _____ _
Day Tele No.: 912-652-5671 ____ Cell No.:_9~1_2_-6_7_7_-6_0_77_1 _____ _
EMAIL Address: [e-mail] ____ _ FaxNo.: 912-652-5311 _____ _
F. PHYSICAL LOCATION OF WELL SITE
(1) Facility Name & Address: Site: CCFTBR00I 7 . Ft Bragg, NC
City: Fort Brag=-_______ County: Cumberland Zip Code: 28310-5000
(2) Geographic Coordinates: Latitude**: ___ 0 --__ " or 0
Longitude**: 0 "or
Reference Datum: ________ Accuracy:. ________ _
Method of Collection: -------------------
**FOR AIR INJECTION AND AQUIFER TEST WELLS ONLY: A FACILITY SITE MAP WITH PROPERTY
BOUNDARIES MAY BE SUBMITTED IN LIEU OF GEOGRAPHIC COO RD INA TES.
G. TREATMENT AREA
Land surface area of contaminant plume: 300
Land surface area ofinj. well network: 300
Percent of contaminant plume area to be treated: 100
square feet
square feet (::S 10,000 fl:2 for small-scale injections)
(must be ::S 5% of plume for pilot test injections)
H. INJECTION ZONE MAPS -Attach the following to the notification.
(1) Contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the
contaminant plume in soil and groundwater, existing and proposed monitoring wells, and existing and
proposed injection wells; and
(2) Cross-section(s) to the known or projected depth of contamination that show the horizontal and vertical
extent of the contaminant plume in soil and groundwater, changes in lithology, existing and proposed
monitoring wells, and existing and proposed injection wells.
Deemed Permitted OW Remediation NOi Rev. 3-21-2018 Page 2
(3) Potentiometric surface map(s) indicating the rate and direction of groundwater movement, plus existing
and proposed wells.
I. DESCRIPTION OF PROPOSED INJECTION ACTIVITIES -Provide a brief narrative regarding the
purpose, scope, and goals of the proposed injection activity. This should include the rate, volume, a,nd duration
of injection over time.
To remove residual LNAPL from monitorin g wells 8-5476A-MW2R and 8-5476A-MW1R. The process will
consist of placing a 4:1 mixture of surfactant into the well. Using a surge block the surfactant will be worked
from the well anulus into the filter pack and adjacent formation. After 24-48 hours the wells will be purged until
clear. a minimum of5 times volume. Purge water will be placed in 55 gallons drums and dis posed as IDW.
J. APPROVED INJECTANTS-Provide a MSDS for each injectant (attach additional sheets if necessary).
NOTE: Only ilyectants approved by the NC Division of Public Health,· Department of Health and Human
Services can be injected Approved injectants can be found online at htt p://deq.nc.gov/about/divisions/water-
resources/water-resources-permits/wastewater-branch/1tround-water-protection/ground-water-a pp roved-in jectants.
All other substances must be reviewed by the DHHSprior to use. Contact the UIC Program for more info (919-
807-6496).
Injectant: Petrosolv __________________________ _
Volume of injectant: 4:1 rato based on well volume ________________ ~_
Concentration at point of injection: 25% ______________________ _
Percent if in a mixture with other injectants: ____________________ _
Injectant: ----------------------------------
Volume ofinjectant: _____________________________ _
Concentration at point of injection: _______________________ _
Percent if in a mixture with other injectants:
lnjectant:
Volume ofinjectant: _____________________________ _
Concentration at point of injection: _______________________ _
Percent if in a mixture with other injectants: ____________________ _
K. WELL CONSTRUCTION DATA
(1) Number of injection wells: _____ Proposed ___ 2 ___ Existing (provide GW-ls)
(2) For Proposed wells or Existing wells not having GW-ls, provide well construction details for each
injection well in a diagram or table format. A single diagram or line in a table can be used for
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page3
multiple wells with the same construction details. Well construction details shall include the
following (indicate if construction is proposed or as -built);
(a) Well type as permanent, Geoprobe/DPT, or subsurface distribution infiltration gallery
(b) Depth below land surface of casing, each grout type and depth, screen, and sand pack
(c) Well contractor name and certification number
L. SCHEDULES —Briefly describe the schedule foi well construction and injection activities.
.September 2019. followine approval by NCDEO
M. MONITORING PLAN — Describe below or in separate attachment a monitoring plan to be used to determine
if violations of groundwater quality standards specified in Subchapter 02L result from the injection activity.
Wells will be gauged on a quarterly basis (February. May,August and November) for the presence of LNAPL..
The next groundwater sampling event will be FY 2024 as determined by the Tier I NCDEO arid Ft Bragg
members.
N. SIGNATURE OF APPLICANT AND PROPERTY OWNER
Well Owner/Applicant: `1 hereby certik under penalty of law, that I am familiar with the information
submitted in this docun,en, and all attachments thereto and that, based on my inguiry of Arose individuals
immediately r•etipansible for obtaining said information, 1 believe that the information is true, accurate and
complete. I am aware that there are significant penalties, including the possibility of fines and intpriswmrent
for siibmittiug false information. I agree to construct, operate, maintain, repair, and if applicably abandon the
. tjection well and all related appurtenances in accordance with the 15,4 NC.-1 C 02C 0200 Rules."
41,' k t w / ]•t} I (it
Signature of Applicant Print or Type Full Name acid 'Title
Property Owner (iftlie nropertv is not owned by the Well Owner/Applicant):
"ifs s owner of the property+ on which the injection well(s) are to be constructed and operated. T hereby consent to
allow the applicant to construct each injection well as outlined in this application and agree that it shall be the
responsibility of the applicant to ensure that the injection well(s) conform to the Well Construction Standards
(15,4 NCAC 02C .0200). "
"Owner" means any person who holds the fee or other property rights in the well being constructed. A well
is real property and its construction on land shall be deemed to vest ownership in the land owner, in the
absence of contrary agreement in writing.
Deemed Pant ned OW Remediatiou NOt Rev. 3-21-2018 Page 4

Signature* of Property Owner (if different from applicant) Print or Type Full Name and Title
*An access agreement between the applicant and property owner may be submitted in lieu of a signature on this form.
Please send 1 (one) hard color copy of his NOi along with a copy on an attached CD or Flash Drive at least
two (2) weeks prior to injection to:
DWR -UIC Program
1636 Mail Service Center
Raleigh, NC 27699-1636
Telephone: [phone]
Deemed Permitted GW Remediation NO! Rev. 3-21-2018 Page 5
Monitoring Date Installed
Well ID (m/dd/yy)
8-5476A-MW1 4/10/2001
8-5476A-MW1R 1/7/2014
8-5476A-MW2 4/10/2001
8-5476A-M-W2R 1/7/2014
8-5476A-MW3 4/10/2001
8-5476A-MW4 3/4/2003
8-5476A-MW5 3/28/2003
8-5476A-MW5R 6/3/2008
8-5476A-MW6 1/15/2008
8-5476A-MW6R 1/7/2014
8-5476A-MW7 1/16/2008
8-5476A-MW8 1/16/2008
8-5476B-MW1 4/10/2001
AMSL = above mean sea level.
bgs = below ground surface.
--= not measured
Date Water
Level Measured
--
8/24/20 18
--
8/24/2018
8/24/2018
..
--
8/24/2018
--
8/24/2018
8/24/2018
8/24/2018
8/24/2018
Table 1
Monitoring and Remediation Well Construction Information
Site CCFTBR00l 7 (Former USTs 8-5476 A and B)
Fort Bragg, North Carolina
Screened Bottom of Well Top of Casing Depth to Water Free Product
Interval (ft. BGS) Elevation (ft.) from Top of Thickness
(x to y ft. BGS) Casing (ft.) (ft.)
16.6 -26.6 27 293.51 ----
l".0-2 .0 -· 292.92 15,01 0.18
14.8-24.8 25.2 293.28 ----
13 .0-23.0 23.9 292.69 14 .94 0.08
16.9-26.9 27.3 293.16 18 .58 0.00
37.3-47.3 47.7 296.19 --..
35.8-40 .8 41.2 293 .21 ---
31.0-41.0 41.2 292.98 34.11 0.00
16.9 • 26.9 27.0 292.52 ----
13.0-23.0 23 .2 292.17 14 .67 0.00
17.7 -27.7 27.8 292.41 27 .27 0.00
32 .8 • 42.8 42.9 292.90 34.74 0.00
34.1 • 44.1 44.4 293 .19 34.59 0.00
Groundwater elevation is calculated by: (top of casing• depth to water)+ (free product thickness *0.8581)
1/1
Ground-Water
Elevation (ft) Comments
Abandoned on 1/7/14 ..
7!!.06 Well replaces 8-5476-A-
MW I
--Abandoned on 1/7/14
277.82 Well replaces 8-5476-A-
MW2
274.58
Well Destroyed by --Construction
Abandoned in 2008 ..
258.87 Well replaces 8-5476-A-
MW5
--Abandoned on 1/7/14
277.50 Well replaces 8-5476-A-
MW6
265.14 Well is damaged
258.16
258.60
Advanced
ETEC Sioremediotion
illikor Solutions
Safety Data Sheet
3830 S Truman Rd. Bldg. 12
Washougal, Washington 98671
[phone] Fax
www.etecllc.corn
Revision Date: 05/19/2017
Section 1: Product and Company Identification
Product Name:
MSDS Number:
Chemical Name:
Chemical Family:
Recommended Use:
Restrictions on Use:
Company:
PetroSol►►TM
016
Mixture
Ethoxylated surfactant mixture
Biosurfactant
No Data
ETEC, LLC
3830 S Truman Rd. Bldg. 12
Washougal, WA 98671
USA
Telephone: [phone]
Emergency Telephone: [phone]
Medical Emergencies: [phone]
U.S. Coast Guard National
Response Center: [phone]
Section 2; Hazards Identification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200)
Serious Eye Damage _ _ _ I Category 1
Label Elements:
Signal Word: Danger
Hazard Statements:
Causes serious eye damage.
Precautionary Statements:
Revision Date: 05/19/2017 Page 1 of 7

Safety Data Sheet PetroSolv™
Wash face and hands thoroughly after handling.
Wear protective gloves/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
Collect spillage.
Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS -none
Section 3: Composition/Information on Ingredients
Ingredients as defined by 29 CFR 1910.1200:
Chemical In redients: CAS Number:
Trade Secret
Percent Ran e:
30-40%
The specific chemical identity and/or exact percentage of the composition has been withheld as Trade
Secret in accordance with paragraph (i) of§ 1910. 1200.
Section 4: First Aid Measures
Description of first aid measures:
Inhalation: Remove victim to fresh air and keep at rest in a position comfor;table for breathing. If
not breathing, give artificial respiration.
Skin Contact: Wash with plenty of soap and water. Take off contaminated clothing and wash
before reuse.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical advice/attention.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: See sections 2 and/or 11.
Indication of any immediate medical attention and special treatment needed: No data available.
Section 5: Fire Fighting Measures
Suitable Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Unsuitable Extinguishing Media: No known information.
Specific Hazards Arising from the chemical/substance: Thermal decomposition can lead to release of
irritating gases and vapors.
Hazardous Combustion Products: Phosphorus oxides. Sodium oxides. Carbon Oxides.
Revision Date: 05/19/2015 Page 2 of 7
Safety Data Sheet PetroSolv™
Protective Equipment and Precautions for Fire-Fighters: As in any fire, wear self-contained breathing
apparatus and full protective gear.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Ensure adequate
ventilation. Use personal protective equipment. Avoid dust formation . Do not breathe
dust/fume/gas/mist/vapors/spray .
Environmental Precautions: Do not flush to surface water. See section 12 for further environmental
data.
Methods for Containment/Cleaning Up: Soak up with non-combustible absorbent. Pick up and transfer
to properly labeled containers. Ventilate area and wash spill site after material pickup is complete.
Section 7: Handling and Storage
Precautions for Safe Handling: Avoid breathing mists or vapors. Use only in a well-ventilated area .
Wash thoroughly after handling. Keep out of reach of children . Handle in accordance with good
industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities:
Storage: Keep in tightly closed container, store in a cool, dry, ventilated place . Store at
temperatures not exceeding 130°F (54 °C).
Section 8: Exposure Controls/Personal Protection
Exposure Limits: There are no OSHA PEL 's, NIOSH REL's, or ACGIH TLV's applicable to this material.
Engineering Controls: Ensure adequate ventilation, especially in confined areas . Ensure that eyewash
stations and safety showers are close to the workstation location.
Personal Protective Equipment:
Eye Protection: Wear appropriate eye protection/face protection .
Hand Protection: Wear appropriate protective gloves .
Skin and Body Protection: Wear appropriate protective clothing to prevent skin exposure.
Take off contaminated clothing and wash before reuse .
Respiratory Protection: Use only in a well-ventilated area. Avoid breathing dust. Wear
appropriate NIOSH approved respirator if exposure limits are exceeded or irritation occurs.
Hygiene Measures: Wash thoroughly after handling . Handle in accordance with good industrial hygiene
and safety practice.
Section 9: Physical and Chemical Properties
Revision Date: 05/19/2015 Page 3 of 7
Safety Data Sheet
Appearance/Physical State:
Color:
Odor:
Odor Threshold:
pH:
Melting/Freezing Point:
Initial Boiling Point:
Flash Point:
Evaporation Rate:
Flammability (solid, gas):
Lower Explosive Limit:
Upper Explosive Limit:
Vapor Pressure:
Vapor Density:
Relative Density:
Solubility:
Partition Coefficient:
Autoignition Temperature:
Decomposition Temperature:
Liquid
Clear to slightly hazy tan color
Slight to none
Not Available
6.5
Not Available
Not Available
Not Available
1.20
Not Available
Not Available
Not Available
Not Available
Not Available
1.00
Complete solubility in water
Not Available
Not Available
Not Available
Section 10: Stability and Reactivity
Reactivity: No information available.
Stability: Stable under ordinary conditions of use and storage.
Possibility of hazardous reactions: No information available.
Conditions to Avoid: Extremes in temperature and direct sunlight.
Incompatible Materials: Strong oxidizing agents, strong acids .
PetroSolv™
Hazardous Decomposition Products: Other decomposition products -No data available. In
case of fire: see section 5.
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Information on Likely Routes of Exposure:
Inhalation:
Ingestion:
Skin Contact:
Eye Contact:
Toxicity Data:
Chemical Name
Trade Secret
No information available .
No information available .
No information available .
Risk of serious damage to eyes.
LD50 ORAL
No data
Symptoms: No information available.
Revision Date: 05/19/2015
LD50 DERMAL LC50 INHALATION
No data No data
Page~ of 7
Safety Data Sheet PetroSolv™
Delayed and Immediate Effects, Chronic Effects from Short and Long Term Exposure:
Sensitization:
Mutagenic Effects:
Reproductive Toxicity:
STOT -Single Exposure:
STOT -Repeated Exposure:
Aspiration Hazard:
Chronic Exposure:
Aggravation of Pre-existing Conditions:
Carcinogenicity :
Com onent CAS NTP
Trade Secret N/A Not listed
No information available.
No information available .
No information available.
No information available .
No information available .
No information available .
No information available .
No information available .
IARC
Not listed
OSHA
Not listed
Additional Information: To the best of our knowledge , the chemical, physical , and toxicological
properties have not been thoroughly investigated.
Section 12: Ecological Information
Ecotoxicity:
This product is safe for the environment at the concentrations predicted under normal use conditions.
Persistance and Degradability: No information available .
Bioaccumulative Potential: No information available .
Mobility in Soil: No information available .
Other Adverse Effects: No information available .
Section 13: Disposal Considerations
Dispose of contents/container in accordance with all applicable local, state and federal regulations.
Section 14: Transport Information
For Transportation Emergencies Involving This Material, Call:
ChemTrec 1-800-424-9300 Company Code: E419
DOT (LAND): Not regulated.
Section 15: Regulatory Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title Ill ,
Section 302 .
Revision Date: 05/19/2015 Page 5 of 7
Safety Data Sheet PetroSolv™
SARA 311/312 Hazard Categories:
Acute Health Hazard Yes
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard No
SARA 313: This material does not contain any chemical components with known GAS numbers that
exceed the threshold (D'e Minimis) reporting levels established by SARA Title Ill , Section 313.
State Ri ht-to-Know:
Com onent Massachusetts NewJerse Penns lvania Illinois Rhode Island
Trade Secret X X
TSCA: Not Applicable
California Prop. 65 Components: This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm.
Section 16: Other Information
NFPA Rating:
Health Hazard: 1
Fire: 0
Reactivity Hazard: 0
Legend:
ACGIH: American Conference of Governmental & Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSUNDSL: Domestic Substances LisUNon -Domestic Substances List
IARC: International Agency for the Research of Cancer
IATA: International Air Traffic Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organizations
NFPA: National Fire Protection Association Health , Flammability & Reactivity ; Hazard Scale 0
=minimal/none 4= significant
NTP: National Toxicology Program
OSHA: Occupational Safety & Health Administration
PEL: Permissible Exposure Limits
RCRA: Resource Conservation & Recovery Act
RQ: Reportable Quantity
RTK: Right-To-Know
SARA: Superfund Amendments & Reauthorization Act
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
Revision Date: 05/19/2015 Page 6 of 7
Safety Data Sheet
TCLP: Toxicity Characteristic Leaching Procedure
voe: Volatile Organic Compounds
PetroSolv™
Disclaimer: The information contained in this SOS is presented in good faith and believed to be accurate
based on the information provided. The SOS does not purport to be all inclusive , and shall be used only
as a guide. While ETEC, LLC believes that the data contained herein comply with 29 CFR 1910.1200,
they are not to be taken as a warranty or representation for which ETEC , LLC assumes legal
responsibility . ETEC, LLC shall not be held liable or accountable for any loss or damage associated with
the use of this material and information. The recommended industrial hygiene and safe use, handling,
storage, and disposal procedures are believed to be generally applicable. However, since the use,
handling, storage, and disposal are beyond ETEC, LLC control, it is the responsibility of the user both to
determine safe conditions for use of this product and to assume liability of loss, damage, or expense
arising out of the material's improper use.
Revision Date: 05/19/2015 Page 7 of 7
North Carolina Department of Environmental Quality-Division of Water Resources
NOTIFICATION OF INTENT (NOi) TO CONSTRUCT OR OPERATE INJECTION WELLS
The following are "permitted by rule" and do not require an individual permit when constructed in accordance
with the rules of 15A NCAC 02C .0200 (NOTE: This form must be received at least 14 DAYS p-rior to in jection )
AQUIFER TEST WELLS USA NCAC 02C .0220 )
These wells are used to inject uncontaminated fluid into an aquifer to determine aquifer hydraulic characteristics.
IN SITU REMEDIATION (15A NCAC 02C .0225 ) or TRACER WELLS {15A NCAC 02C .0229 ):
1) Passive Injection S ystems -In-well delivery systems to diffuse injectants into the subsurface. Examples include
ORC socks, iSOC systems, and other gas infusion methods (Note: Injection Event Records (IER) do not need to be
submitted for replacement of each sock used in ORC systems).
2) Small-Scale Injection O perations -Injection wells located within a land surface area not to exceed 10,000
square feet for the purpose of soil or groundwater remediation or tracer tests. An individual permit shall be required
for test or treatment areas exceeding 10,000 square feet.
3) Pilot Tests -Preliminary studies conducted for the purpose of evaluating the technical feasibility of a
remediation strategy in order to develop a full scale remediation plan for future implementation, and where the
surface area of the injection zone wells are located within an area that does not exceed five percent of the land
surface above the known extent of groundwater contamination. An individual permit shall be required to conduct
more than one pilot test on any separate groundwater contaminant plume.
4) Air Injection Wells -Used to inject ambient air to enhance in-situ treatment of soil or groundwater.
Print Clearly or Type Information. Illegible Submittals Will Be Returned As Incomplete.
DATE: 19 August
byDWR)
,20_19_ PERMIT NO. ________ (to be filled in
A. WELL TYPE TO BE CONSTRUCTED OR OPERATED
(1)
(2)
(3)
(4)
(5)
(6)
___ .Air Injection Well ...................................... Complete sections B through F, K, N
___ .Aquifer Test Well ....................................... Complete sections B through F, K, N
___ Passive Injection System ............................... Complete sections B through F, H-N
X_Small-Scale Injection Operation ...................... Complete sections B through N
___ Pilot Test ................................................. Complete sections B through N
___ Tracer Injection Well ................................... Complete sections B through N
B. STATUS OF WELL OWNER: Choose an item.
C. WELL OWNER(S) -State name of Business/Agency, and Name and Title of person delegated authority to
sign on behalf of the business or agency:
Name(s): Monica A. Stephenson, Directorate of Public Works
Mailing Address: IMBG-PWE _ M, 4-2175 Reilly Road Stop A
City: Fort Bragg State: _NC Zip Code: 28310-5000 County: Cumberland
DayTeleNo.: 910-396-4009 CellNo.: NA"-----------
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page 1
EMAIL Address: [e-mail] Fax No.: 910-396-4009_
D. PROPERTY OWNER(S) (if different than well owner/applicant)
Name and Title: Same as Above ________________________ _
Company Name ---------------------------------
Mailing Address:---------------------------------
City: _____________ State: __ Zip Code: _______ County: _____ _
DayTeleNo.: ____________ _ Cell No.: ___________ _
EMAIL Address:. _____________ _ Fax No.: ___________ _
E. PROJECT CONTACT (Typically Environmental Engineering Firm)
Name and Title: Renee Hill, Geologist ________________________ _
Company Name US Army Corp of Engineers, Savannah District _____________ _
Mailing Address: 100 West.Oglethorpe Ave _______________________ _
City: Savannah ______ State:_ GA_ Zip Code: 31401 ___ County:_C~h~a~th~am~-----
Day Tele No.: 912-652-5671 ____ Cell No.:~9~1~2~-6~7~7-~6~07~7~1 ____ _
EMAIL Address: [e-mail] ____ _ Fax No.: 912-652-5311 _____ _
F. PHYSICAL LOCATION OF WELL SITE
(1) Facility Name & Address: Site: CCFTBR0016 . Ft Brag!!., NC
City: Fort Brago-_______ County: Cumberland Zip Code: 28310-5000
(2) Geographic Coordinates: Latitude**: ___ 0 --__ " or 0
Longitude**: 0 "or 0
Reference Datum: ________ Accuracy: ________ _
Method of Collection: -------------------
**FOR AIR INJECTION AND AQUIFER TEST WELLS ONLY: A FACILITY SITE MAP WITH PROPERTY
BOUNDARIES MAY BE SUBMITTED IN LIEU OF GEOGRAPHIC COORDINATES.
G. TREATMENT AREA
Land surface area of contaminant plume: 100
Land surface area ofinj. well network: 100
Percent of contaminant plume area to be treated: 100
square feet
square feet(::: 10,000 ft2 for small-scale injections)
(must be::: 5% of plume for pilot test injections)
H. INJECTION ZONE MAPS -Attach the following to the notification.
(1) Contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the
contaminant plume in soil and groundwater, existing and proposed monitoring wells, and existing and
proposed injection wells; and
(2) Cross-section(s) to the known or projected depth ofcontamination that show the horizontal and vertical
extent of the contaminant plume in soil and groundwater, changes in lithology, existing and proposed
monitoring wells, and existing and proposed injection wells.
Deemed Permitted OW Remediation NOi Rev. 3-21-2018 Page2
(3) Potentiometric surface map(s) indicating the rate and direction of groundwater movement, plus existing
and proposed wells.
I. DESCRIPTION OF PROPOSED INJECTION ACTIVITIES -Provide a brief narrative regarding the
purpose, scope, and goals of the proposed injection activity. This should include the rate, volume, and duration
of injection over time.
To remove residual LNAPL from monitorin g well 8-3004-MW4. The process will consist of placing a 4:1
mixture of surfactant into the well. Using a surge block the surfactant will be worked from the well anulus into
the filter pack and adjacent formation. After 24-48 hours the wells will be purged until clear. a minimum of 5
times volume. Purge water will be p laced in 55 gallons drums and dis posed as IDW.
J. APPROVED INJECTANTS-Provide a MSDS for each injectant (attach additional sheets if necessary).
NOTE: Only injectants approved by the NC Division of Public Health, Department of Health and Human
Services can be injected Approved injectants can be found online at http://deq.nc.2ov/about/divisions/water-
resources/water-resources-permits/wastewater-branch/ground-water-protection/ground-water-approved-injectants.
All other substances must be reviewed by the DHHS prior to use. Contact the UIC Program for more irifo (919-
807-6496).
Injectant: Petrosolv __________________________ _
Volume of injectant: 4: 1 rato based on well volume _________________ _
Concentration at point of injection: 25% ______________________ _
Percent if in a mixture with other injectants: ____________________ _
Irtjectant: --------------------------------
Volume ofinjectant: _____________________________ _
Concentration at point of injection: _______________________ _
Percent if in a mixture with other iajectants: ____________________ _
Injectant:
Volume ofinjectant: _____________________________ _
Concentration at point of injection: _______________________ _
Percent if in a mixture with other injectants: ____________________ _
K. WELL CONSTRUCTION DATA
(1) Number of injection wells: ______ Proposed ____ l ___ Existing (provide GW-1 s)
(2) For Proposed wells or Existing wells not having GW-ls, provide well construction details for each
injection well in a diagram or table format. A single diagram or line in a table can be used for
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page3
multiple wells with the same construction details, Well construction details shall include the
following (indicate if construction is proposed or as-built):
(a) Well type as permanent, Geoprobe/DPT, or subsurface distribution infiltration gallery
(b) Depth below land smface of casing, each grout type and depth; screen, and sand pack
(c) Well contractor name and certification number
L. SCHEDULES -Briefly describe the schedule for well construction and injection activities.
September 2019, following approval by NCDEO
M. MONITORING PLAN -Describe below or in separate attachment a monitoring plan to be used to determine
if violations of groundwater quality standards specified in Subchapter 02L result from the injection activity.
Wells will be gauged on a quarterly basis (February, May. August and November) for the presence ofLNAPL.
The next groundwater sampling event will be conducted in February 2020.
N. SIGNATURE OF APPLICANT AND PROPERTY OWNER
Well Owner/Applicant: "l hereby certify, tmder penalty of law, that I am familiar with the information
submitted in this document and all attachments thereto and that, based on my inquily of. those individuals
immediately responsible for obtaining said information, I believe thal the information is true, accurate and
complete. I am aware that there are significant penalties, including the possibility of fines and imprisonment,
for s ubmitting false information. I agree to construct, operate, maintain, repair, and if applicable, abandon the
~lion well and all related appurtenances in accordance with the 15A NCAC 02C 0200 Rules."
.~~-~GU fY'lj<v\(j "I 17D [t c-
P r int or Type F ull Name a nd T itle
Prope11Y Owner (if the proper ty is not owned by the Well Own er/Applicant}:
"As owner of the property on which the injection well(s) are to be constructed and operated, I hereby consent to
allow the applicant to consh71ct each injection well as outlined in this application and agree that it shall be the
responsibility of the applicant to ensure that the injection well(s) conform to the Well Consh71ction Standards
(15.A NCA.C 02C. 0200). "
"Owner'' means any person who holds the fee or other proper ty rights in the well b eing constructed. A well
is real property and its construction on land shall be deemed to vest ownership in the land owner, in the
absence of contr~ry agreement in writing.
Signature* of Property Owner (if different from applicant) Print or Type Full Name and Title
*An access agreement between the applicant and property owner may be submitted iii lieu of a signature on this form.
Deem~d Permitted GW Rernedi~lion N01 Rev. 3-21-2018 Pagc4
Please send 1 (one) hard color copy of his NOi along with a copy on an attached CD or Flash Drive at least
two (2) weeks prior to injection to:
DWR -UIC Program
1636 Mail Service Center
Raleigh, NC 27699-1636
Telephone: [phone]
Deemed Permitted GW Remediation NOI Rev. 3-21-2018 Page 5
06/18/01
DIRECT -PUSH WELLPOINT COMPLETION LOG
8-3004-
NI�'►'-i
A 12 2
5
7
n
8
9
4
13
10
NOT TO SCALE
11
I. COMPANY NAME:
Savannah District, Army Corps of Engineers
SHEET 1
OF 1 slinTs
Z. DRILLING CONTRACTOR:
Savannah District, Army Corps of Engineers
3. PROJECT:
Fort Bragg USTs Phase I
4. LOCATION
Fort Bragg, North Carolina
i. NAME OF DRILLER/INSPECTOR-
S. Windmcamp/C. Moores
G. COORDINATES:
N- 510087.20 E- 2004550.62
7. ELEVATION (TOP OF CASINO):
297.08
ELEVATION (GROUND SURFACE); 297A2
S. INSTALLATION DATE:
14 October 2001
WELLPOINT CONSTRUCTION DETAILS
- HEIGHT OF CASING ABOVE GROUND: (Flush Mount)
2- TYPE OF WELLPOINT PROTECTION: FLUSH MOUNT COVER
3 - GROUT MIXTURE: PORTLAND-BENTONITE
METHOD OF PLACEMENT: TREMIE
4 - DEPTH TO TOP OF SCR.EI3N: 38-6'
5 - TOTAL LENGTH OF RISER: 38,Fi'
6 - DIAMETER OF WELLPOINT: I.25"
7. 1JE1 lli II) 111P OF SFAI 33.0'
8 - DEPTH TO TOP OF FILTER PACK: 36.0'
9 - TYPE OF FILTER PACK: PRE -PACK PVC AND STAINLESS
STEEL GEOPROBE SCREEN
40/70 SILICA SAND IN SCREEN
SIZE: 16/30 SILICA SAND IN ANNULUS
I0 - LENGTH OF SCREEN: 10.00'
11 - TOTAL DEPTH OF WELLPOINT: 49.0'
12 - CASING DEPTH BELOW SURFACE: FLUSH MOUNT
13 - TYPE OF SEAL: 114" BENTONITE PELLETS
QUANTITY USED: 15.0 Lbs.
COMMENTSILOCATION SKETCH
TOC WIL:
BGS
4250" @ 24 HOURS
42.5' DURING DRILLING
06/18/01

Table 2
Well Gauging Summary
CCFTBR0016 (Site 16)
Fort Bragg, North Carolina
Monitartlsg Well
Hurdling
Cootdlnates
Eaa3
Coardlnatea
Elevation TOC Elevtiorn
(R mai)
Well Depth
(5 bgal
Elevation or
Bmtom Depth
(ft mal)
Dam
Meeaured
Depth to Water
(ft btoc)
Water Elevation
(It mall
MW-2
513192632
2004591.859
295.43
NA
NA
08116/13
42.00
253.43
MW-7R
510240 039
2004508.803
295.11
NA
NA
06/16/13
41.62
253,49
MW-BR
510218.080
20045/7.957
294.73
NA
NA
08/16/13
41.22
253.51
mix...,
510157.554
2004441.225
294.72
47 96
246.74
08/18/13
41,10
253.62
0924/13
39,11
255.61
05/14/14
39.42
255.30
11434/14
36.89
255.83
05/12/15
38.67
256.05
05102/15
36,49
258.23
02106/17
36.61
258.11
01124/18
38.95
255_77
02/06/19
34.70
260.02
MW-10
510033.854
2004414.001
294.15
47.9E
246.17
0521/13
41.75
252.40
0 /1Cd13
40.48
253.69
03124/13
39.61
254 54
02136/19
14 07
260 09 _
MW-11
509904.1E15
2004478.600
294.58
4840
24618
08/16/13
40.95
253.61
0924113
40.07
254.49
02106119
34.52
260.04
249/-12
--
509972.529
2004581.100
295.10
51.02
244.08
001116/13
41.62
253.48
09/24/13
40.64
254.48
05/14/14
39.88
255.22
11/04/14
39.18
255.92
05/12115
39.45
255.65
05/02116
37.64
257.48
02435/17
37.44
257.66
01/24/18
39.64
255.46
02/C8/19
35.16
259.94
M1N-134
510090.236
I
2004617 946
297.06
50.06
247 00
08/16/13
43.60
25346
09/24/13
42.57
254.49
02/08/19
36.88
260.20
MW-19R
510994.712
2004584.302
297.80
49.72
247.08
08/18/13
44.09
253.51
09/24/13
43,09
254.51
05/14/14
42,49
255.11
11/04/14
41.75
255.65
05/12/35
41.50
256.10
05/02/16
39.65
257.95
02106/17
39549 -
257,91
01/24118
41.99
255.61
02106/19
NA
Destroyed
MW-202
510120.027
2094572.793
296.67
50.43
246.24
08/16413
43,17
253.50
09424/13
42.65
254.02
02/06/19
36.75
259.92
B 9004-MWIR
510175379
2004562.352
296.06
NA
NA
08/16/13
42.55
253.51
8-3004-MW3
510157422
2004601.521
29610
NA
NA
08116/13
42.85
253 45
5 l.n..'+.1
510086_524
2904545.637
295.49
44
7.1.. _r-.
06116113
41.92 _
23357
09/24/13
40.94
25155
05/14/14
39.93
255.5 1
11/94/14
39.63.
255.86
05112/15
39.55
255.94
05/02/16
40.05
255.44
02/06/17
37.62
257.87
01/24/18
35,96
255.63
02436/19
't30
259.19
83004-61015R
510303,568
2004631.431
294.13
HA
HA
00/16/13
40.80
253.53
8-3004-MW16
510110.312
2004543.053
295.83
47.72
247.91
08/16/13
42.03
253.60
0924/13
41,08
254.55
05/14/114
40.02
255.61
11/04/14
39.70
255.93
05/12/15
39.83
256.00
05102/16
37.53
2513 00
02/06/17
37_33
258.30
01124f18
39.90
255.73
02535/19
38.70
2558.93
9514,1W1
519376 421
2004318.904
293.34
46.65
246.59
05/16/13
41.65
251.69
08116(13
30.76
253,58
09/24/13
38.92
254.42
05/14714
3747
255.87
11/04114
37.53
255.71
05/12/15
37 81
255.73
05/02115
35.56
257,48
0206117
35.36 1
257.98
01/24/18
37.42
255.92
02105/19
33.56
259.78
Notes:
NA- Not Av89/ble
ft msl - Net above meal sea level
ft bloc - feel below top of casing
R bgs - feet below ground surface
Wall depth Awed on September 24, 2013 /lWO measurements.

Advanced
ETEC Bioremediotion
Solutions
Safety Data Sheet
3830 S Truman Rd. Bldg. 12
Washougal, Washington 98671
[phone] Fax
www.ctecilc.com
Revision Date 05/19/2017
Section 1: Product and Company identification
Product Name:
MSDS Number:
Chemical Name:
Chemical Family:
Recommended Use:
Restrictions on Use:
Company:
PetroSoivTM
016
Mixture
Ethoxylated surfactant mixture
Biasurfactant
No Data
ETEC, LLC
3830 S Truman Rd. Bldg. 12
Washougal, WA 98671
USA
Telephone: [phone]
Emergency Telephone: [phone]
Medical Emergencies: [phone]
U.S. Coast Guard National
Response Center: [phone]
Section 2: Hazards Identification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200)
r Serious Eye Damage
Label Elements:
Signal Word: Danger
Hazard Statements:
Causes serious eye damage.
Precautionary Statements:
Revision Date: 05/19/2017
Category 1
Page 1 of 7

Safety Data Sheet PetroSolv™
Wash face and hands thoroughly after handling.
Wear protective gloves/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
Collect spillage.
Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS -none
Section 3: Composition/Information on Ingredients
Ingredients as defined by 29 CFR 1910.1200:
Chemical In redients: CAS Number:
Trade Secret
Percent Ran e:
30-40%
The specific chemical identity and/or exact percentage of the composition has been withheld as Trade
Secret in accordance with paragraph (i) of §1910.1200.
Section 4: First Aid Measures
Description of first aid measures:
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, give artificial respiration.
Skin Contact: Wash with plenty of soap and water. Take off contaminated clothing and wash
before reuse.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical advice/attention.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: See sections 2 and/or 11.
Indication of any immediate medical attention and special treatment needed: No data available.
Section 5: Fire Fighting Measures
Suitable Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Unsuitable Extinguishing Media: No known information.
Specific Hazards Arising from the chemical/substance: Thermal decomposition can lead to release of
irritating gases and vapors.
Hazardous Combustion Products: Phosphorus oxides. Sodium oxides. Carbon Oxides.
Revision Date: 05/19/2015 Page 2 of 7
Safety Data Sheet Petro So Iv TM
Protective Equipment and Precautions for Fire-Fighters: As in any fire, wear self-contained breathing
apparatus and full protective gear.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Ensure adequate
ventilation. Use personal protective equipment. Avoid dust formation. Do not breathe
dust/fume/gas/mist/vapors/spray.
Environmental Precautions: Do not flush to surface water. See section 12 for further environmental
data.
Methods for Containment/Cleaning Up: Soak up with non-combustible absorbent. Pick up and transfer
to properly labeled containers. Ventilate area and wash spill site after material pickup is complete.
Section 7: Handling and Storage
Precautions for Safe Handling: Avoid breathing mists or vapors. Use only in a well-ventilated area.
Wash thoroughly after handling. Keep out of reach of children. Handle in accordance with good
industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities:
Storage: Keep in tightly closed container, store in a cool, dry, ventilated place. Store at
temperatures not exceeding 130°F (54°C).
Section 8: Exposure Controls/Personal Protection
Exposure Limits: There are no OSHA PEL's, NIOSH REL's, or ACGIH TLV's applicable to this material.
Engineering Controls: Ensure adequate ventilation, especially in confined areas. Ensure that eyewash
stations and safety showers are close to the workstation location.
Personal Protective Equipment:
Eye Protection: Wear appropriate eye protection/face protection.
Hand Protection: Wear appropriate protective gloves.
Skin and Body Protection: Wear appropriate protective clothing to prevent skin exposure.
Take off contaminated clothing and wash before reuse.
Respiratory Protection: Use only in a well-ventilated area. Avoid breathing dust. Wear
appropriate NIOSH approved respirator if exposure limits are exceeded or irritation occurs.
Hygiene Measures: Wash thoroughly after handling. Handle in accordance with good industrial hygiene
and safety practice.
Section 9: Physical and Chemical Properties
Revision Date: 05/19/2015 Page 3 of 7
Safety Data Sheet
Appearance/Physical State:
Color:
Odor:
Odor Threshold:
pH:
Melting/Freezing Point:
Initial Boiling Point:
Flash Point:
Evaporation Rate:
Flammability (solid, gas):
Lower Explosive Limit:
Upper Explosive Limit:
Vapor Pressure:
Vapor Density:
Relative Density:
Solubility:
Partition Coefficient:
Autoignition Temperature:
Decomposition Temperature:
Liquid
Clear to slightly hazy tan color
Slight to none
Not Available
6.5
Not Available
Not Available
Not Available
1.20
Not Available
Not Available
Not Available
Not Available
Not Available
1.00
Complete solubility in water
Not Available
Not Available
Not Available
Section 10: Stability and Reactivity
Reactivity: No information available.
Stability: Stable under ordinary conditions of use and storage.
Possibility of hazardous reactions: No information available.
Conditions to Avoid: Extremes in temperature and direct sunlight.
Incompatible Materials: Strong oxidizing agents, strong acids.
PetroSolv™
Hazardous Decomposition Products: Other decomposition products -No data available. In
case of fire: see section 5.
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Information on Likely Routes of Exposure:
Inhalation:
Ingestion:
Skin Contact:
Eye Contact:
Toxicity Data:
Chemical Name
Trade Secret
No information available.
No information available.
No information available.
Risk of serious damage to eyes.
LDS0 ORAL
No data
Symptoms: No information available.
Revision Date: 05/19/2015
LD50 DERMAL LCS0 INHALATION
No data No data
Page 4 of 7
Safety Data Sheet PetroSolv™
Delayed and Immediate Effects, Chronic Effects from Short and Long Term Exposure:
Sensitization:
Mutagenic Effects:
Reproductive Toxicity:
STOT -Single Exposure:
STOT -Repeated Exposure:
Aspiration Hazard:
Chronic Exposure:
Aggravation of Pre-existing Conditions:
Carcino genicit y:
Com onent CAS NTP
Trade Secret N/A Not listed
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
IARC
Not listed
OSHA
Not listed
Additional Information: To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Section 12: Ecological Information
Ecotoxicity:
This product is safe for the environment at the concentrations predicted under normal use conditions.
Persistance and Degradability: No information available.
Bioaccumulative Potential: No information available.
Mobility in Soil: No information available.
Other Adverse Effects: No information available.
Section 13: Disposal Considerations
Dispose of contents/container in accordance with all applicable local, state and federal regulations.
Section 14: Transport Information
For Transportation Emergencies Involving This Material, Call:
ChemTrec 1-800-424-9300 Company Code: E419
DOT (LAND): Not regulated.
Section 15: Regulatory Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title Ill,
Section 302.
Revision Date: 05/19/2015 Page 5 of 7
Safety Data Sheet PetroSolv™
SARA 311/312 Hazard Categories:
Acute Health Hazard Yes
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard No
SARA 313: This material does not contain any chemical components with known CAS numbers that
exceed the threshold (De Minimis) reporting levels established by SARA Title Ill, Section 313.
State Ri ht-to-Know:
Com onent Massachusetts NewJerse Penns lvania Illinois Rhode Island
Trade Secret X X
TSCA: Not Applicable
California Prop. 65 Components: This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm.
Section 16: Other Information
NFPA Rating:
Health Hazard: 1
Fire: 0
Reactivity Hazard: 0
Legend:
ACGIH: American Conference of Governmental & Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSUNDSL: Domestic Substances List/Non-Domestic Substances List
IARC: International Agency for the Research of Cancer
IATA: International Air Traffic Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organizations
NFPA: National Fire Protection Association Health, Flammability & Reactivity; Hazard Scale 0
=minimal/none 4= significant
NTP: National Toxicology Program
OSHA: Occupational Safety & Health Administration
PEL: Permissible Exposure Limits
RCRA: Resource Conservation & Recovery Act
RQ: Reportable Quantity
RTK: Right-To-Know
SARA: Superfund Amendments & Reauthorization Act
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
Revision Date: 05/19/2015 Page 6 of 7
Safety Data Sheet
TCLP: Toxicity Characteristic Leaching Procedure
voe: Volatile Organic Compounds
PetroSolv TM
Disclaimer: The information contained in this SOS is presented in good faith and believed to be accurate
based on the information provided. The SOS does not purport to be all inclusive, and shall be used only
as a guide. While ETEC, LLC believes that the data contained herein comply with 29 CFR 1910.1200,
they are not to be taken as a warranty or representation for which ETEC, LLC assumes legal
responsibility. ETEC, LLC shall not be held liable or accountable for any loss or damage associated with
the use of this material and information. The recommended industrial hygiene and safe use, handling,
storage, and disposal procedures are believed to be generally applicable. However, since the use,
handling, storage, and disposal are beyond ETEC, LLC control, it is the responsibility of the user both to
determine safe conditions for use of this product and to assume liability of loss, damage, or expense
arising out of the material's improper use.
Revision Date: 05/19/2015 Page 7 of 7
MILITARY INTERDEPARTMENTAL PURCHASE REQUEST I 1.
PAGE 1 OF 1 PAGES
2 . FSC 13. CONTROL SYMBOL NO. I 4. DATE PREPARED I 5. MIPR NUMBER I 6. AMEND NO
17 APRIL 2019 11330747 0001
7. TO: B. FROM: (Agency, name, telephone number of originator)
ARMY CORPS OF ENGINEERS CIVIL WORKS DA, Directorate of Public Works
ATTN: IMBG-PWE-M
PO BOX 889 2175 Reilly Road Stop A
SAVANNAH,GA 31401 Fort Bragg, NC, NC 28310
Tel: Tel:
9. ITEMS □ ARE 0 ARE NOT INCLUDED IN THE INTERSERVICE SUPPLY SUPPORT PROGRAM AND REQUIRED INTERSERVICE
SCREENING □ HAS [!I HAS NOT BEEN ACCOMPLISHED.
ITEM DESCRIPTION ESTIMATED ESTIMATED
NO (Federal stock number, nomenclature, specification and/or drawing no.) QTY UNIT UNIT TOTAL
a b C d PRICE PRICE
e f
001 RCW Monitoring
1.000 243,904.00 243,904.00
001 (Amend) RCW Monitoring
1.000 24,390.00 24,390.00
BRAGG DPW (Endangered Species
Branch) FN-10004-19, Implement ESMC
RCW Monitoring DPW Budget POC: Chris
Durham [phone]
[e-mail]
DPW Project POC: Jessie Schillaci
[phone]
[e-mail]
USACE Budget POC: Renee Thomas (912)
654-6124
[e-mail] USACE
COR: Jimmy Luo [phone]
[e-mail] Send copy
of MIPR to:
[e-mail]
Period of Performance is 2/15/19 to
2/14/20 .
THIS MIPR MUST BE ACCEPTED AS RECEIVED ELSE IT SHOULD BE REJECTED.
10. SEE ATTACHED PAGES FOR DELIVERY SCHEDULES, PRESERVATION AND PACKAGING INSTRUCTIONS, SHIPPING I 11.
GRAND TOTAL
INSTRUCTIONS AND INSTURCTIONS FOR DISTRIBUTION OF CONTRACTS AND RELATED DOCUMENTS. 268,294.00
12. TRANSPORTATION ALLOTMENT (Used if FOB Contractor's plant) 13. MAIL INVOICE TO (Payment will be made by)
DFAS-INDY VP GFEBS
8899 E 56TH STREET
INDIANAPOLIS IN 46249-3800
PAY OFFICE DODAAD
14. FUNDS FOR PROCUREMENT ARE PROPERLY CHARGEABLE TO THE ALLOTMENTS SET FORTH BELOW. THE AVAILABLE BALANCES OF WHICH
ARE SUFFICIENT TO COVER THE ESTIMATED TOTAL PRICE.
ill CR:N LIMIT/ SUPPLEMENTAL ACCOUNTING CLASSIFICATION ACCTG STA AMOUNT
APPROPRIATIO~ SUBHEAD DODAAC
02120192019 A2ABF 131053VENQ 3230 0011330747 S.0045949.34 .7.2 021001 268,294 .00
2020000
15. AUTHORIZING OFFICER (Type name and title) 16. SIGNATURE 17. DATE
DURHAM.CHRISTOPHER.MICH Digitally ~lgned by
CHRIS DURHAM, RMO AE L.1 046618382
DURHAM.CHRISTOPHER.MICHAEL 1046618382 17 APRIL 2019 Date: 2019_Q,U714:22:41 -04'00'
DD Form 448, JUN 72 (EG) PREVIOUS EDITION IS OBSOLETE
ACCEPTANCE OF MIPR
1. TO (Requiring Activity Address -Include ZIP Code) 2. MIPR NUMBER I O OOlMENT NO. DA, Directorate of Public Works 1133074 7
ATTN: IMBG-PWE-M
2175 Reilly Road Stop A 4. DATE (MIPR Signature Date) I S. AMOUNT (As listed on the MIPR) Fort Bragg, NC,NC 28310 04/17/2019 Tel:
6. The MIPR identified above is accepted and the items requested will be provided as follows: (Check as Applicable)
a.[!] ALL ITEMS WILL BE PROVIDED THROUGH REIMBURSEMENT (Category I)
b .o ALL ITEMS WILL BE PROCORED BY THE DIRECT CITATION OF FUNDS (Category II)
c.o ITEMS WILL BE PROVIDED BY BOTH CATEGORY I AND CATEGORY II AS INDICATED BELOW
d .o THIS ACCEPTANCE, FOR CATEGORY I · ITEMS, IS QUALIFIED BECAUSE OF ANTICIPATED CONTINGENCIES AS TO FINAL PRICE,
CHANGES IN THIS ACCEPTANCE FIGURE WILL BE FURNISHED PERIODICALLY UPON DETERMINATION OP DEPINITIZED PRICES, BUT
PRIOR TO SUBMISSION OF BILLINGS.
7.o MIPR ITM NUMBER(S) IDENTIFIED IN BLOCK 13, "REMARKS" IS NOT ACCEPTED (IS REJECTED) FOR THE REASONS INDICATED.
B. TO BE PROVIDED THROUGH REIMBURSEMENT 9. TO BE PROCURED BY DIRECT CITATION OF FUNDS
CATEGORY I CATEGORY II
ITEM NO
I
QUANTITY I ESTIMATED PRICE ITEM NO
I
QUANTITY
I
ESTIMATED PRICE
a. b. c. a. b. c.
THIS MIPR MUST BE ACCEPTED AS RECEIVED ELSE IT SHOULD BE REJECTED.
d. TOTAL ESTIMATED PRICE
I
e. TOTAL ESTIMATED PRICE
I
10. ANTICIPATED DATE OF OBLIGATION FOR CATEGORY II ITEMS 11. GRAND TOTAL ESTIMATED PRICE OF ALL ITEMS
12. FUNDS DATA (Check if applicable)
a.□ ADDITIONAL FUNDS IN THE AMOUNT OP$ ARE REQUIRED {See justification in Block 13)
b .o FUNDS IN THE AMOUNT OF$ ARE NOT REQUIRED AND MAY BE WITHDRAWN
13. REMARKS
14. ACCEPTING ACTIVITY (Complete Address) 1S. TYPED NAME AND TITLE OP AUTHORIZED OFFICIAL
16. SIGNATURE 1 17. DATE
DD FORM 448-2, JUL 71 (EG) PREVIOUS EDITIONS WILL BE USED UNTIL EXHAUSTED
North Carolina Department of Environmental Quality -Division of Water Resources
NOTIFICATION OF INTENT (NOi) TO CONSTRUCT OR OPERATE INJECTION WELLS
The following are "permitted by rule" and do not require an individual permit when constructed in accordance
with the rules of 15A NCAC 0iC .0200 (NOTE: This form must be received at least 14 DAYS prior to injection )
AQUIFER TEST WELLS (15A NCAC 02C .0220)
These wells are used to inject uncontaminated fluid into an aquifer to determine aquifer hydraulic characteristics.
IN SITU REMEDIATION (15A NCAC 02C .0225) or TRACER WELLS (15A NCAC 02C .OW)):
1) Passive In jection S vstems -In-well delivery systems to diffuse injectants into the subsurface. Examples include
ORC socks, iSOC systems, and other gas infusion methods (Note: Injection Event Records (IER) do not need to be
submitted for replacement of each sock used in ORC systems).
2) Small-Scale Injection O perations -Irijection wells located within a land surface area not to exceed 10,000
square feet for the purpose of soil or groundwater remediation or tracer tests. An individual permit shall be required
for test or treatment areas· exceeding 10,000 square feet.
3) Pilot Tests -Preliminary studies conducted for the purpose of evaluating the technical feasibility of a
remediation strategy in order to develop a full scale remediation plan for future implementation, and where the
surface area of the injection zone wells are located within an area that does not exceed five percent of the land
surface above the known extent of groundwater contamination. An individual permit shall be required to conduct
more than one pilot test on any separate groundwater contaminant plume.
4) Air In jection Wells -Used to inject ambient air to enhance in-situ treatment of soil or groundwater.
Print Clearly or Type Information. Illegible Submittals Will Be Returned As Incomplete.
DATE: 19 Aug ust
by DWR)
20 19 PERMIT NO. _________ (to be filled in
A. WELL TYPE TO BE CONSTRUCTED OR OPERA TED
(1)
(2)
(3)
(4)
(5)
(6)
___ Air Injection Well. ................................. , ... Complete sections B through F, K, N
___ Aquifer Test Well.. ..................................... Complete sections 8 through F, K, N
___ Passive Injection System ............................... Complete sectibns B through F, H-N
X_Small-Scale Injection Operation ...................... Complete sections 8 through N
--~Pilot Test. ................................................ Complete sections B through N
___ Tracer Injection Well ................................... Complete sections B through N
B. STATUS OF WELL OWNER: Choose an item.
C. WELL OWNER(S) -State name of Business/ Agency, and Name and Title of person delegated authority to
sign on behalf of the business or agency:
Narne(s): Monica A. Stephenson, Directorate of Public Works
Mailing Address: IMBG-PWE_M, 4-2175 Reilly Road Stop A
City: Fort Bragg State: NC Zip Code: 28310-5000 County: Cumberland
Day Tele No.: 910-396-4009 Cell No.: NA ________ _
Deemed Pennitted GW Remediation NOi Rev.3.-21-2018 Page I
EMAIL Address: [e-mail] Fax No.: 910-396-4009_
D. PROPERTY OWNER(S) (if different than well owner/applicant)
Name and Title: Same as Above _________________________ _
Company Name -----------------------------------
Mailing Address: _________________________________ _
City: _____________ State: __ Zip Code: _______ County:. ______ _
Day Tele No.: ____________ _ Cell No.: __________ _
EMAIL Address: ______________ _ Fax No.: ___________ _
E. PROJECT CONTACT (Typically Environmental Engineering Firm)
Name and Title: Renee Hill, Geologist _________________________ _
Company Name US Army Corp of Engineers, Savannah District _____________ _
Mailing Address: 100 West Oglethorpe Ave ________________________ _
City: Savannah ______ State:_ GA_ Zip Code: 3140 ! ___ County: Chatham
DayTeleNo.: 912-652-5671 ___ _ Cell No.: 912-677-60771
EMAIL Address: [e-mail] ____ _ Fax No.: 912-652-5311 _____ _
F. PHYSICAL LOCATION OF WELL SITE
(I) Facility Name & Address: Site: CCFTBR00l3. Ft Brag!!., NC
City: Fo1i Brag.::,_ _______ County: Cumberland · Zip Code: 28310-5000
(2) Geographic Coordinates : Latitude**: ___ 0 --___ " or 0
Longitude**: 0 "or 0
Reference Datum: ________ ---'Accuracy: ________ _
Method of Collection:. ______________ _
**FOR AIR INJECTION AND AQUIFER TEST WELLS ONLY: A FA CILITY SITE MAP WITH PROPERTY
BOUNDARI ES MAY BE SUBMITTED IN LIEU OF GEOGRAPHIC COORDINAT ES.
G. TREATMENT AREA
Land surface area of contaminant plume: 100
Land surface area of inj. well network: I 00
Percent of contaminant plume area to be treated : 100
square feet
square feet(:'.:: 10,000 ft 2 for small-scale injections)
(must be:::: 5% of plume for pilot test injections)
H. INJECTION ZONE MAPS-Attach the following to the notification.
(I) Contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the
contaminant plume in soil and groundwater, existing and proposed monitoring wells, and existing and
proposed injection wells; and
(2) Cross-section(s) to the known or projected depth of contamination that show the horizontal and ve1iical
extent of the contaminant plume in soil and groundwater, changes in lithology, existing and proposed
monitoring wells, and existing and proposed injection wells.
Deemed Pennitted OW Remediation NOi Rev.3-21-2018 Page 2
(3) Potentiometric surface map(s)' indicating the rate and direction of groundwater movement, plus existing
and proposed wells.
I. DESCRIPTION OF PROPOSED INJECTION ACTIVITIES -Provide a brief narrative regarding the
purpose, scope, and goals of the proposed injection activity. This should include the rate, volume, and duration
of injection over time. ·
To remove residual LNAPL from monitoring wells 4040-5 . 4040-8A. and 4040-8R. The process will consist of
placing a 4:1 mixture of surfactant into the well. Using a sure e block the surfactant will be worked from the
well anulus into the filter pack and ad jacent formation. After 24-48 hours the wells will be purged until clear. a
minimum of5 times volume. Purrt e water will be placed in 55 gallons drums and dis posed as IDW.
J. APPROVED INJECT ANTS-Provide a MSDS for each injectant (attach additional sheets if necessary).
NOTE: Only injectants approved by the NC Division of Public. Health, Department of Health and Human
Services can be injected. Approved injectants can be found online at htt p://deq.nc.!wv/about/divisions/water-
resources/water-resources-permits/wastewater-branch/uround-water-protection/!!.round-water-a pp roved-in jectants.
All other substances must be reviewed by the DHHS prior to use. Contact the UIC Program for more info (919-
807-6496). .
Injectant: Petrosolv __________________________ _
Volume ofinjectant: 4:1 rato based on well volume __________________ _
Concentration at point of injection: 25% ______________________ _
Percent ifin a mixture with other injectants:
Injectant:
Volume ofinjectant: _____________________________ _
Concentration at point of injection: _______________________ _
Percent ifin a mixture with other injectants:
Injectant: ----------------------------------
Volume of injectant: _____________________________ _
Concentration at point of injection:
Percent ifin a mixture with other injectants: ____________________ _
K. WELL CONSTRUCTION DATA
(!) Number of injection wells: _____ Proposed __ ~3~ __ Existing (provide GW-1 s)
(2) For Proposed wells or Existing wells not having GW-ls, provide well construction details for each
injection well in a diagram or table format. A single diagram or line in a table can be used for
Deemed Pem1itted OW Remediation NOi Rev. 3-21-2018 Page 3
multiple wells with the same construction details_ Well construction details shall include the
following (indicate if construction is proposed or as -built):
(a)
(b)
(c)
Well type as permanent, Geoprobe/DPT, or subsurface distribution infiltration gallery
Depth below land surface of casing, each grout type and depth, screen, and sand pack
Well contractor name and certification number
L. SCHEDULES — Briefly describe the schedule for well construction and injection activities.
September 2019. following approval bN NCDEt)
NI. MONITORING PLAN — Describe below or in separate attachment a monitoring plan to he used to determine
if violations of groundwater quality standards specified in Subchapter 02L result from the injection activity.
Wells will be gauged on a :suarterlv basis 1 Februan .. Maw. AuL ust and November p for the presence of LNAPL.
The_ next_uroundwater samplind event will be FY 2024 as determined En the Tier 1_ NCDEEi ii and Ft Brace
members.
N. SIGNATURE ON APPLICAN'r AND PROPER 'I N OWNER
Well OwneriApplil an(: "I hereby certifi:, under penalty of law, that I �rrn fcnniliar with the n for'rnwron
suhrnitted in this document and all attachments thereto and that, based on my inquiry of those individuals
immediately responsible for obtaining said information, I believe that the information is true, accurate and
complete_ I um a rare that there are significant penalties, including the possibility of fines and imprisonment,
for submitting false infbrmation. I agree to construct, operate, maintain, repair, and if applicable, abandon the
and
'ection well call related appurtenances in accordan ° with the 154 dr=:4r_' Lk 02O(' Rules,"
Signature of Applicant
Print or Type Full Name and Title
Property Owner lifthe propert4 is not owned b,, the Well Owner/Applicant):
"As owner of the proper°, on tii'hich the injection well(s) are to be constructed and operated, I hereby consent to
allow the applicant to construct each injection well us outlined in this application and agree that it shall be the
responsibility of the applicant to ensure that the injection 14ell(s) conform to the well Construction Standards
(15.! NCAC O2C .O2O0, „
"Owner" means any person who holds the fee or other property rights in the well being constructed. A well
is real property and its construction on land shall be deemed to vest ownership in the land owner, in the
absence of contrary agreement in writing.
Dotmad Penuit[cd OW Remediation NOI Rey. 3-21-20I 8
Paw 4

Signature* of Property Owner (if different from applicant) Print or Type Full Name and Title
* An access agree ment between the applicant and p r op erty owner may be submitted in lieu of a signature on this form.
Please send 1 (one) hard. color copy of his NOl along with a copy on an attached CD or Flash Drive at least
two (2) weeks prior to injection to:
DWR -UIC Program
1636 Mail Service Center
Raleigh, NC 27699-1636
Telephone: [phone]
Deemed Pennitted GW Remediation NOi Rev. 3-21-2018 Page 5
Date .Water Monitoring Date Installed Level Well ID (mm/dd/yyyy) Measured
4040-4A 1/7/2014 8/24/2018
4040-4D 1/23/2003 --
, 4040-5 2/28/20()1 IK
4040-5A 1/7/2014 8/24/2018
4040-5D 11/19/2004 8/24/2018
4040-5R 9/30/2008 8/24/2018
4040-6 2/27/2001 8/24/2018
4040-7 2/27/2001 8/24/2018
Table I
Monitoring and 'Remediation Well Construction Information
Site CCliTUR00l3 ( POL POINT l 2-4040A-M)
Fort Bragg, North Carolina
Bottom of Top of Depth to Water Free Product Screened Interval Casing· from Top of Well Thickness (x to ybgs) (ft bgs) Elevation Casing (ft) (ftAMSL) (ft)
25.0-35 .0 35 .2 285.38 26.30 0.00
25.5-35 .0 35.6 286.70 --
~ 1~4'.'0-3 41,--. -t, 7ft j ·J:si ~ -0.04 --~ -
28.0-38.0 38.0 286.19 28.68 0.00
34.7-44.7 45.4 286.30 39.48 0.00
24.0-44 .0 45.0 286.53 37 .71 0.00
25.0-45.0 45 .5 287.20 40.58 0.00
24.6-44.6 45.0 284.83 33 .85 0.00
3/6
Groundwater
Elevation* Comment
(ftAMSL)
259.08
Abandoned on 1/7/2014; Replaced --with 4040-4A
-1 J S~. .
257.51
246.82
248.82
246.62
Bottom of well previously reported (35.5 ft bgs
250.98 [U S ACE Savannah, 2007]) was incorrect;
actual depth is 45.0 ft bgs.
Table I
Monitoring and Remediation Well Construction Information
Site CCFTBR00IJ ( POL POINT I 2-4040A-M)
Fort Bragg, North Carolina
Date Water Bottom of Monitoring Date Installed Screened Interval
Top of
Casing
Elevation
(ftAMSL)
Depth to Water
from Top of
Casing
Free Product Groundwater
Level Well
Well ID (mm/dd/yyyy) Measured (x toy bgs) (ft bgs)
4040-8 1/9/2003 25.4-34.9 35.5
040-EA j/7/2 0 14 R124/2 fl .!-8 24:0 :34--;-o -3..4.9 --
~ 4(~{ 1 ()/] /2008 8/24/2018 15.0-35.0 -~IJ --
4040-9 1/9/2003 8/24/2018 38.9-48.4 49.0
4040-10 l/10/2003 --19.0-28.5 29 .1
4040-1 l 1/22/2003 --26.0-35.5 36.l
4040-12 l/23/2003 8/24/2018 35.5-45.0 45.6
4040-13 l/24/2003 8/24/2018 40.0-50.0 50.6
(ft)
286.11
28 4 .-9.7 -2.6.~
3· 49 I'"'-----r----16.-41 ._
286.73 39.04
285.72
288.59
283.20 35.67
288.50 41.19
4/6
Thickness
(ft)
0 DO
O.tl
0.00
--
--
0.00
0.00
-
--
Elevation*
(ftAMSL)
258.94
-259 .02
247.69
--
--
247.53
247.31
Comment
Abandoned on 1/7/2014; Replaced by
4040-8A
,~
Not measured.
Well is buried under debris; packed
down gravel, concrete chips, and
asphalt chunks from construction
staging area.
Advanced
ETEC Bioremediation
Ilkor Solutions
Safety Data Sheet
3830 S Truman Rd. Bldg. 12
Washougal, Washington 98671
[phone] Fax
www.etecllc.com
Revision Date: 05/19/2017
Section 1: Product and Company Identification
Product Name:
MSS Number:
Chemical Name:
Chemical Family:
Recommended Use:
Restrictions on Use:
Company:
PetroSolvTM
016
Mixture
Ethoxylated surfactant mixture
Biosurfactant
No Data
ETEC, LLC
3830 S Truman Rd. Bldg. 12
Washougal, WA 98671
USA
Telephone:, [phone]
Emergency Telephone: [phone]
Medical Emergencies: [phone]
U.S. Coast Guard National
Response Center: [phone]
Section 2: Hazards Identification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910,1200)
Serious Eye Damage _ Category 1
Label Elements:
Signal Word: Danger
Hazard Statements:
Causes serious eye damage.
Precautionary Statements:
Revision Date: 05/19/2017
Page 1 of 7

Safety Data Sheet PetroSolv TM
Wash face and hands thoroughly after handling.
Wear protective gloves/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
Collect spillage.
Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS -none
Section 3: Composition/Information on Ingredients
Ingredients as defined by 29 CFR 1910.1200:
Chemical In redients: CAS Number:
Trade Secret
Percent Ran e:
30-40%
The specific chemical identity and/or exact percentage of the composition has been withheld as Trade
Secret in accordance with paragraph (i) of §1910.1200.
Section 4: First Aid Measures
Description of first aid measures:
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, give artificial respiration.
Skin Contact: Wash with plenty of soap and water. Take off contaminated clothing and wash
before reuse.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical advice/attention.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: See sections 2 and/or 11.
Indication of any immediate medical attention and spec·ial treatment needed: No data available.
Section 5: Fire Fighting Measures
Suitable Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Unsuitable Extinguishing Media: No known information.
Specific Hazards Arising from the chemical/substance: Thermal decomposition can lead to release of
irritating gases and vapors.
Hazardous Combustion Products: Phosphorus oxides. Sodium oxides. Carbon Oxides.
Revision Date: 05/19/2015 Page 2 of 7
Safety Data Sheet PetroSolv™
Protective Equipment and Precautions for Fire-Fighters: As in any fire, wear self-contained breathing
apparatus and full protective gear.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Ensure adequate
ventilation. Use· personal protective equipment. Avoid dust formation. Do not breathe
dust/fume/gas/mist/vapors/spray.
Environmental Precautions: Do not flush to surface water. See section 12 for further environmental
data.
Methods for Containment/Cleaning Up: Soak up with non-combustible absorbent. Pick up and transfer
to properly labeled containers. Ventilate area and wash spill site after material pickup is complete.
Section 7: Handling and Storage
Precautions for Safe Handling: Avoid breathing mists or vapors. Use only in a well-ventilated area.
Wash thoroughly after handling. Keep out of reach of children. Handle in accordance with good
industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities:
Storage: Keep in tightly closed container, store in a cool, dry, ventilated place. Store at
temperatures not exceeding 130°F (54 °C).
Section 8: Exposure Controls/Personal Protection
Exposure Limits: There are no OSHA PEL's, NIOSH REL's, or ACGIH TLV's applicable to this material.
Engineering Controls: Ensure adequate ventilation, especially in confined areas. Ensure that eyewash
stations and safety showers are close to the work.station location.
Personal Protective Equipment:
Eye Protection: Wear appropriate sye protection/face protection.
Hand Protection: Wear appropriate protective gloves.
Skin and Body Protection: Wear appropriate protective clothing to prevent skin exposure.
Take off contaminated clothing and wash before reuse.
Respiratory Protection: Use only in a well-ventilated area. Avoid breathing dust. Wear
appropriate NIOSH approved respirator if exposure limits are exceeded or irritation occurs.
Hygiene Measures: Wash thoroughly after handling. Handle in accordance with good industrial hygiene
and safety practice.
Section 9: Physical and Chemical Properties
Revision Date: 05/1_9/2015 Page 3 of 7
Safety Data Sheet
Appearance/Physical State:
Color:
Odor:
Odor Threshold:
pH:
Melting/Freezing Point:
Initial Boiling Point:
Flash Point:
Evaporation Rate:
Flammability (solid, gas):
Lower Explosive Limit:
Upper Explosive Limit:
Vapor Pressure:
Vapor Density:
Relative Density:
Solubility:
Partition Coefficient:
Autoignition Temperature:
Decomposition Temperature:
Liquid
Clear to slightly hazy tan color
Slight to none
Not Available
6.5
Not Available
Not Available
Not Available
1.20
Not Available
Not Available
Not Available
Not Available
Not Available
1.00
Complete solubility in water
Not Available
Not Available
Not Available
Section 10: Stability and Reactivity
Reactivity: No information available.
Stability: Stable under ordinary conditions of use and storage.
Possibility of hazardous reactions: No information available.
Conditions to Avoid: Extremes in temperature and direct sunlight.
Incompatible Materials: Strong oxidizing agents, strong acids.
PetroSolv™
Hazardous Decomposition Products: Other decomposition products -No data available. In
case of fire: see section 5.
Hazardous Polymerization: Will not occur
Section 11: Toxicological Information
Information on Likely Routes of Exposure:
Inhalation:
Ingestion:
Skin Contact:
Eye Contact:
Toxicity Data:
Chemical Name
Trade Secret
No information available.
No information available.
No information available.
Risk of serious damage to eyes.
LOSO ORAL
No data
LOSO DERMAL
No data -~--
Symptoms: No information available.
Revision Date: 05/19/2015
LCSO INHALATION
No data
Page 4 of 7
Safety Data Sheet PetroSolv™
Delayed and Immediate Effects, Chronic Effects from Short and Long Term Exposure:
Sensitization:
Mutagenic Effects:
Reproductive Toxicity:
STOT -Single Exposure:
STOT -Repeated Exposure:
Aspiration Hazard:
Chronic Exposure:
Aggravation of Pre-existing Conditions:
Carcino genicity:
Com anent CAS NTP
Trade Secret N/A Not listed
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No in.formation available.
IARC
Not listed
OSHA
Not listed
Additional Information: To the best of our knowledge, th~ chemical, physical, and toxicological
properties have not been thoroughly investigated.
Section 12: Ecological Information
Ecotoxicity:
This product is safe for the environment at the concentrations predicted under normal use conditions.
Persistance and Degradability: No information available.
Bioaccumulative Potential: No information available.
Mobility in Soil: No information available.
Other Adverse Effects: No information available.
Section 13: Disposal Considerations
Dispose of contents/container in accordance with all applicable local, state and federal regulations.
Section 14: Transport Information
For Transportation Emergencies Involving This Material, Call:
ChemTrec 1-800-424-9300 · Company Code: E419
DOT (LAND): Not regulated.
Section 15: Regulatory Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title Ill,
Section 302.
Revision Date: 05/19/2015 Page 5 of 7
Safety Data Sheet PetroSolv TM
SARA 311/312 Hazard Categories:
Acute Health Hazard Yes
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard No
SARA 313: This material does not contain any chemical components with known GAS numbers that
exceed the threshold (De Minimis) reporting levels established by SARA Title Ill, Section 313.
State Ri ht-to-Know:
Com onent Massachusetts NewJerse Penns lvania Illinois Rhode Island
Trade Secret X X
TSCA: Not Applicable
California Prop. 65 Components: · This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm.
Section 16: Other Information
NFPA Rating:
Health Hazard: 1
Fire: 0
Reactivity Hazard: 0
Legend :
ACGIH: American Conference of Governmental & Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSUNDSL: Domestic Substances List/Non-Domestic Substances List
IARC: International Agency for the Research of Cancer
IAT A: International Air Traffic Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organizations
NFPA: National Fire Protection Association Health, Flammability & Reactivity; Hazard Scale 0
=minimal/none 4= significant
NTP: National Toxicology Program
OSHA: Occupational Safety & Health Administration
PEL: Permissible Exposure Limits
RCRA: Resource Conservation & Recovery Act
RQ: Reportable Quantity
RTK: Right-To-Know
SARA: Superfund Amendments & Reauthorization Act
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
Revision Date: 05/19/2015 Page 6 of 7
Safety Data Sheet
TCLP: Toxicity Characteristic Leaching Procedure
VOC: Volatile Organic Compounds
PetroSolv™
Disclaimer: The information contained in this SOS is presented in good faith and believed to be accurate
based on the information provided. The SOS does not purport to be all inclusive, and shall be used only
as a guide. While ETEC, LLC believes that the data contained herein comply with 29 CFR 1910.1200,
they are not to be taken as a warranty or representation for which ETEC, LLC assumes legal
responsibility. ETEC, LLC shall not be held liable or accountable for any loss or damage associated with
the use of this material and information. The recommended industrial hygiene and safe use, handling,
storage, and disposal procedures are believed to be generally applicable. However, since the use,
handling, storage, and disposal are beyond ETEC, LLC control, it is the responsibility of the user both to
determine safe conditions for use of this product and to assume liability of loss, damage, or expense
arising out of the material's improper use.
Revision Date: 05/19/2015 Page 7 of 7
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
Tw
- RW
Groundwater Potentiometric Contour
—lg. Groundwater Flow Direction
Free Product Extent
NOTE:
The grou ndwater elevation
is in FEET.
* - Not used to determine
patentiametric contours.
1 inch = 30 feet
30 15 0 30
Feet
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, and
FHTRW Design Section
FORT BRAGG, NORTH CAROLINA
POTENTIOMETRIC CONTOUR MAP
FTBR 310
AUGUST 2018
OCTOBER 2018
FIGURE 6

Well ID: RW19-14
Date
Product
Thickness (ft)
15-Feb-2017
0.35
17-May-2017
0.35
15-Aug-2017
0.28
26-Oct-2017
0.28
20-Feb-2018
0.66
24-Aug-2018
0.22
5-Feb-2018
0.16
21-Apr-2019
0.69 ,
Well ID: RW19-13
Date
Product
Thickness (ft)
26-Oct-2017
0.01
20-Feb-2018
0.00
24-Aug-2018
0.00
5-Feb-2018
0.00
21-Apr-2019
0.00
Well ID: RW19-15
Date
Product
Thickness (ft)
20-Feb-2018
0.06
24-Aug-2018
0.00
5-Feb-2018
0.00
21-Apr-2019
0.00
RW19-06
RW19-07
RW19:08
Well ID: RW19-08
RW,19-13
RW19-09
RW19-10
Weil ID: RW19-07
Product
Thickness (ft)
26-Oct-2017
Product
Thickness (ft)
Sheen
20-Feb-2018
24-Aug-2018
5-Feb-2018
21-Apr-2019
15-Feb-2017
17-May-2017
15-Aug-2017
26-Oct-2017
20-Feb-2018
24-Aug-2018
5-Feb-2018�
21-Apr-2019
Well ID: RW19-03
15-Feb-2017
17-May-2017
15-Aug-2017
26-Oct-2017
20-Feb-2018
24-Aug-2018
5-Feb-2018
21-Apr-2019
Product
Thickness (ft)
RW19-16
RW19-15
RW19-11
RW19-03
RW 19-18
TW19-02
0.41
0.10
0.31
0.14
0-06
0.00
0.04
0.00
RW19-04R*
RW 19-02
RW19-17
Well ID: RW19-09
Product
;Thickness (ft)
15-Feb-2017 0.22
17-May-2017
0.32
15-Aug-2017 0.28
26-Oct-2017 0.31
20-Feb-2018 0.29
24-Aug-2018 0.22
5-Feb-2018
1-Apr-2019
0.26
0.41
15-Feb-2017
17-May-2017
15-Aug-2017
26-Oct-2017
20-Feb-2018
24-Aug-2018
5-Feb-2018
21-A+r-2019
Well ID: RW19-05
Product
Thickness (ft)
0.03
0.09
0.10
0.09
0.08
0.00
Well ID: RW19-01
Product
Thickness (ft)
15-Feb-2017 Damaged
17-May-2017 Damaged
Well ID: RW19-01R
15-Aug-2017 Damaged
26-Oct-2017 0.01
20-Feb-2018 0.00
24-Aug-2018 0.00
5-Feb-2018 0.17
21-Apr-2019 0.18
4=11
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
TW
• RW
Free Product Extent
NOTE:
The groundwater elevation
is in FEET.
* - Not used to determine
potentiometric contours.
NP - Free Product not present.
SHEEN - Water Level indicator
indicated fuel but thickness
was not indicated.
N
1 inch = 40 feet
40 20 0 40
Feet
A
l
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeoiogy, and
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
FREE PRODUCT THICKNESS MAP
FTBR 310
APRIL 2019
JULY 2019
FIGURE 5

NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
Groundwater (Monitoring Well
Groundwater Potentiometric Contour
—` Groundwater Flow Direction
Free Product Extent
Buildings
NOTE: The groundwater elevation
is in FEET.
*Groundwater elevations are
not used for contouring
1 inch = 100 feet J�
100 50 0 100
i Feet
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, end
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
POTENTIOMETRIC CONTOUR MAP
CCFTBR0037
FORMER USTs P-6718 A-E
AUGUST 2017
OCTOBER 2018
FIGURE 6

SAFMW24D*
SAFMW24M*
SAFMW24S
Well ID: P6718-MW1B
Product
Thickness (ft)
16-Feb-2017
18-May-2017
16-Aug-2017
25-Oct-2017
20-Feb-2018
27-Aug-2018
8-Feb-2019
26-Apr-2019
Well ID: P6718-MW1C
16-Feb-2017
18-May-2017
16-Aug-2017
25-Oct-2017
20-Feb-2018
27-Aug-2018
8-Feb-2019
26-Apr-2019
Well ID: P6718-MWZ-07
Product
Date
Thickness (ft)
16-Feb-2017 0.00
18-May-2017 0.00
16-Aug-2017 0.00
25-Oct-2017 0.01
20-Feb-2018 0.02
27-Aug-2018 0.00
8-Feb-2019 0.00
26-Apr 2019 0.00
Pfi518
P6718
P6619
P-6718-OWS1-MW
M
SAF'MW22
P-6718-MW1 C*
P-6718-MW2-07*
P-6718-MW4-07
P682
P-671 8-MW3-07
Well ID: P6718-MW1A
Product Le.
Date
Thickness (ft)
16-Feb-2017 0.04
18-May-2017 0.04
16-Aug-2017 0.05
25-Oct-2017 0.17
20-Feb-2018 0.17
27-Aug-2018 0.00
8-Feb-2019 0.03
26-Apr-2019 0.00
"'tr- _ SAFMW23*
P-6718-M W I A
SA FMW7A*
SAFMWI 6
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
ql) Groundwater Monitoring Well
Free Product Extent
Buildings
1 inch = 100 feet A
100 50 0 100
Feet
I I
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, and
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
FREE PRODUCT THICKNESS MAP
CCFTBR0037
FORMER USTs P-6718 A-E
APRIL 2019
JULY 2019
FIGURE 5

85476
8-5476B-MW1
8-5476A-MW5R
(258 67') ' d,
8:5476A-MW3
(274! 8')
8;5476A-MW6R
(277t50')
8-5476A-MW2R
8=5476A,MW7
(265r14')
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area_
Legend
Q, Groundwater Monitoring Well
Groundwater Potentiometric Contour
Groundwater Flow Direction
Free Product Extent
Buildings
NOTE The groundwater elveation
is in FEET.
1 inch --2❑feet
20 10 0 20
Feet
U.S. ARMY CORPS OF ENGNEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, and
NTRW Design Section
FORT BRAGG, NORTH CAROLINA
POTENTIOMETRIC CONTOURS MAP
CC FTBR0037
FORMER USTs 8-5476 A-B
AUGUST 2018
OCTOBER 2018
FIGURE 6

85476
8-5476A-MW3
Well ID: 8-5476A-MW6R
Product
Thickness (ft)
8-5476E-MW1
14-Feb-2017
17-May-2017
15-Aug-2017
24-Oct-2017
20-Feb-2018
24-Aug-2018
875476AFMwi R
Well ID: 8-5476A-MW1R
Product
Thickness (ft)
14-Feb-2017
17--May--2017
15-Aug-2017
24-Oct-2017
20-Feb-2018
24-Aug-2018
8-5476A-MW8
8-5476A-MW6R
8-5476A-MW2R
Well ID: 8-5476A-MW2R
14-Feb-2017
17-May-2017
15-Aug-2017
24-Oct-2017
20-Feb-2018
24-Aug-2018
Product
Thickness (ft)
0.12
0.02
0.04
0.06
0.00
0.08
JO U RN Y11.1N,
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
Groundwater Monitoring Well
Free Product Extent
Buildings
1 inch = 20 feet
20 10 0 20
Feet
I 1
11111
A
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, and
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
FREE PRODUCT THICKNESS MAP
CCFTBROOI7
FORMER USTs 8-5476 A-B
AUGUST 2018
OCTOBER 2018
FIGURE 5

10TW�
(2Cf1.0 '
8-40O4-611W1 8
(258 93')
8-3o04-1 1' ev
8w3 O4-MY+
(256.O2')
M W-20
(255,61')
(25..94')
fill►[!'=i r:
.20)
""r
gib
1■
4111404
• lip, r :0 jle_:._ ,.
r
-. •Z
1
•
-111
•
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
e Monitoring Well Locations
-* Groundwater Direction
Groundwater Contours
Notes:
1. All values are in feet.
2. Labels without value were not
measured.
3. 8-3004-MW-3, 8-3004-MW-5R, and
MW-20R were not used for GW
direction determination.
1 inch = 50 feet
50 25 0 50
Feet
I f
11111
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, and
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
POTENTIOMETRIC CONTOUR MAP
CCFTBR0016
FEBRUARY 2019
MARCH 2019 FIGURE 4

III
11356
them
.4e1110.
Benzene:
ND
gip
I
11460
Benzene:
30 pg/L
Benzene:
2,600 NgIL
•
AV
1
8-3004-MW 1 R
8-3004-MW4
•
8-3004-MW5R
8-3004-MW3
MW-20R
MW-19R
Benzene:
8 300 A IL
41, 400
81808
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
it Monitoring Well Locations
r�
M .• Benzene Isocontour (0 pg/L)
Benzene Isocontour (5,000 pglL)
Buildings
Notes:
1. AU values are in pg1L.
2. Wells without tables are non -detect.
3. Red Text exceeded the NC 2L for
benzene (1 pglL).
4. J :Estimated: The analyte was
positively identified; the quantitation
is an estimation.
1 inch = 60 feet
60 30 0
N
A
60
Feet
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, and
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
BENZENE ISOCENCTRATION MAP
CCFTBRO01 s
FEBRUARY 2019
MARCH 2019
FIGURE 5

4040-20
(Not Found)
4040-3R
{25';3,
4040-2
(259:78' )
4040=1 D*
4040-15
(245i27')
4040-5*
(255.28')
4040-5R 4A47j-;
¢=5D
(248.82') ‘.1. (246.82`)
40404D
(ABANDONED)
4040-F
.-r- (260.32:,
4040.5A
1257' 5
4040-16
(245q8:)
4040.r13
-r-
4040-23
(258.18')
4040-25
(257:94 )�
4040-19
(Not Found)
BASTOGNE
GABLS HOUSING
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
Groundwater Monitoring Well
—* Groundwater Flow Direction
Potentiornetric Countour
Buildings
NOTE:
Groundwater elevation
is in FEET,
* - Data not used for determining
potentiometric contours.
1 inch = 50 feet
50 25 0 50
Feet
A
U.S. ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrngeofogy, and
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
POTENTIOMETRIC CONTOUR MAP
FORMER POL POINT #1 (CCFTBR0013)
FORMER USTs 2-4040 A-M
AUGUST 2018
OCTOBER 2018
FIGURE 6

4040-20
4040-12
Well ID: 4040-8A
Product
Date
Thickness (ft)
F 2017 0.00
I4 eb
17-Ma y-2017
15-Aug-2017
24-Oct-2017
20-Feb-2018
24-Aug-2 018
8-Feb-2019
4-May-2019
Well ID: 4040-3R
Date
Product
Thickness (ft)
14-Feb-2017
0.00
17-May-2017
0.00
15-Aug-2017
0A0
24-Oct-2017 4
0.00
20-Feb-2018
0.08
24-Aug-2018
0.00
8-Feb-2019
0.00
4-May-2019
0.00
4040-2 \
4040-1
4040-'1D*
4040-3R
e
40403A
4040-3* 4040-4A
Well ID: 4040-4A
Date
14-Feb-2017
17-May-2017
15-Aug-2017
24-Oct-2017
20-Feb-2018
24-Aug-2018
8-Feb-2019
4-May-2019
Product
Thickness (ft)
0.00
0.03
0.00
0.00
0.07
0.00
0.0❑
0.00
Well 1D: 4040-8R
14-Feb-2017
17-May-2017
15-Aug-2017
24-Oct-2017
20-Feb-2018
24-Aug-2018
8-Feb-2019
Product
Thickness L
0.00
4-Ma -2019 0.08
17F1
4040-8 R
4040-8A
4040-F
4040-9
4040-15
4040-16
4040-5
4040-50'
4040=5A 4040.13
4040-23
4040-25
4040-19
14-Feb-2017 0.00
17-May-2017 0.00
15-Aug-2017 0.00
24-Oct-2017 0.00
20-Feb-2018 0.02
24-Aug-2018 D.04
8-Feb-2019 0.09
4-May-2019 0.00
Well ID: 4040-5A
Date Product
Thickness (ftj-
14-Feb-2017 i 0.00
17-May-2017 0.00
15-Aug-2017 0.02
24-Oct-2017 0.00
20-Feb-2018 0.00
24-Aug-2018 . 0.00
8-Feb-2019 1 0.00
4-Mav-2019 0.00
NOTE: The above map is of the Fort Bragg,
North Carolina, cantonment area.
Legend
qi Groundwater Monitoring Well
Buildings
1 inch = 50 feet I1
50 25 0 50
Feet
[ r
gill'
U"8" ARMY CORPS OF ENGINEERS
SAVANNAH DISTRICT
Geology, Hydrogeology, and
HTRW Design Section
FORT BRAGG, NORTH CAROLINA
FREE PRODUCT THICKNESS MAP
FORMER POL POINT #1 (CCFTBR0013)
FORMER USTs 2-4040 A-M
MAY 2019
JULY 2019
FIGURE 5