WI0300289_DEEMED FILES_20150716 (2)

Rogers, Michael
From: Ness, Margaret <[e-mail]>
Thursday, July 16, 2015 3:19 PM Sent:
To: Rogers, Michael
Cc:
Subject:
Watson, Edward M; Parker, Michael; Pitner, Andrew; Schaefer, Brett
RE : WI0300289 Notice to inject (NOi)-MPC Charlotte
Attachments: AS-06 URS Well Log.pdf
Sorry for the delay ...
• Attached is the log for AS-06, GW-1 not located
• Mark Ehrman
Marathon Petroleum Co.
8902 Vincennes Circle, Suite D
Indianapolis, IN. 46268
317/871-7824 office
mwehrman @marathon petroleum.com
From: Rogers, Michael [mailto:[e-mail]]
Sent: Thursday, May 21, 2015 4:00 PM
To: Ness, Margaret
Cc: Watson, Edward M; Parker, Michael; Pitner, Andrew
Subject: RE: WI0300289 Notice to inject (NOi)-MPC Charlotte
Thank you for submitting the Notice of Intent to Construct or Operate Injection Wells (NOi) for the Marathon Petroleum
Company Charlotte Terminal located at 7401 Old Mount Holly Road, Charlotte, Mecklenburg County, NC 28214. The
Central Office of the WQROS received your complete NOi on May 18, 2015. Please note the following:
• Please provide the GW-1 for the existing well proposed to be used for injection (AS06/BS22?). If the
GW-1 cannot be obtained, provide well construction info including depth, casing/screen, grouts,
installation date and well contractor.
• Please provide email address for Mark Ehrman w/Marathon Petroleum in order for us to email a copy
of this NOi acknowledgement.
Please remember to submit the following regarding this inject-ion activity:
1) Well Construction Records (GW-1) and Abandonment Records (GW-30) when completed. Please provide copies of
the GW-ls and GW-30s if not already submitted (originals go the address printed on the form}. NOTE: Direct push
or Geoprobe wells are considered wells and require construction (GW-1) and abandonment forms (GW-30}. If well
construction/abandonment information is the same for the wells, only one form needs to be completed-just
indicate total number of injection points in the Comments/Remarks section of form. These forms can be found on
our website at http://portal.ncdenr.org/web/wg/aps/gwpro/reporting-forms.
2) Injection Event Records (IER). All injections, including air and passive systems require an IER. The IER can be
modified for air sparge wells (e.g., air flow 'continuous' for date or rate of injection, etc.).
You can scan and send these forms directly to me at michael.rogers @ncdenr.gov , send by fax to my attention at 919-
807-6406, or via regular mail to address below. When submitting the above forms, you will need to enter the nine-digit
alpha-numeric number on the form (i.e., WI0XXXXXX) that has been assigned to the injection activity at this site. This
notification has been given the deemed permit number WI0300289. This number is also referenced in the subject line of
1
this email. You may if you wish, scan and send back as attachments in reply to this email, as it will already have the
assigned deemed permit number in the subject line.
Thank you for your cooperation.
Michael Rogers, P.G. (NC & FL)
Hydrogeologist
NCDENR-DWR
Water Quality Regional Operations Section
1636 Mail Service Center
Raleigh, NC 27699
Direct No. 919-807-6406
http://portal .ncde n r .org/web/wq/aps/gwpro/reporting-forms
NOTE: Per Executive Order No. 150, all e-mails sent to and from this account are subject to the North Carolina Public
Records Law and may be disclosed to third parties.
From: Watson, Edward M
Sent: Tuesday, May 19, 2015 1:28 PM
To: Rogers, Michael
Subject: FW: Notice to inject -MPC Charlotte
Mike,
Here is additional information that I requested for the contractor.
Regards,
Ed
From: Ness, Margaret [mailto:marqaret.ness @aecom.com]
Sent: Tuesday, May 19, 2015 1:15 PM
To: Watson, Edward M
Subject: RE: Notice to inject -MPC Charlotte
See below. Let me know if any other questions/clarifications.
From: Watson, Edward M [mailto:edward.watson @ncdenr.gov]
Sent: Tuesday, May 19, 2015 8:53 AM
To: Ness, Margaret
Subject: RE: Notice to inject -MPC Charlotte
Margaret,
I have received the Notice of Intent. DWR will issue a permit as a tracking number for this project. Are the injection
wells the proposed Bio-Sparge well locations as shown on the map submitted? Yes, that is correct.
2
The only thing being injected is air and no other medium? The description of proposed injection activities has been left
1 blank. Can you give me some information regarding your proposed injection activities? How many injection event are
proposed? What is that monitoring plan for post injection?
Only ambient air is to be injected. Proposed injection will be continuous. Each well will be operating at approximately
15 psi at each well head. Following startup/shakedown, monitoring will occur at least monthly while the system is in
operation. Groundwater gauging/sampling will occur semi-annually. The system operation is estimated to be 4 years. It
is anticipated that the semi-annual sampling will occur at least 1 year after system turn off (with additional semi-annual
or yearly sampling beyond for additional years). Sampling includes BTEX, MTBE, Napt, 1-DCA and field parameters
including DO.
This information will help with site review and provide background information.
The monitoring schedule will be needed to be able to provide information of the effectiveness of post injection bio-
remediation.
Thank you for providing the information.
Regards,
Edward Watson
North .Carolina Dept. of Environment & Natural Resources
Division of Water Resources/ Water Quality Regional Operations Section
610 E. Center Ave., Suite 301
Mooresville, NC 28115
Ph: 704.663.1699 Fax: [phone]
****************************************************************************
E-mail correspondence to and from this address is subject to the North Carolina Public Records Law
and may be disclosed to third parties unless the content is exempt by statute or other regulation.
****************************************************************************
From: Ness, Margaret [mailto:margaret.ness @aecom.com]
Sent: Monday, May 18, 2015 5:24 PM
To: Watson, Edward M
Subject: Notice to inject -MPC Charlotte
Hi Ed,
Both forms are dated 3/2015 (your example and the one we submitted). I think I'm missing something ... ?
From: Watson, Edward M [mailto:edward.watson @ncdenr.gov]
Sent: Monday, May 18, 2015 3:37 PM
To: Ness, Margaret
Subject: RE: contact info -margaret ness
Here is the link to our internet site that includes permit and forms.
http:ljportal .ncdner.org/Web /aps/gw pro/permit-a pp lication#ln-situRemed
If you have any questions, feel free to contact me:
Regards,
3
Ed
From: Ness, Margaret [mailto:[e-mail]]
Sent: Monday, May 18, 2015 3:25 PM
To: Watson, Edward M
Subject: contact info -margaret ness
Hi Ed,
This may be easier, to get my email address.
Margaret Ness, PG
Project Manager, Geosciences Department
D: 919-461 -1423 C: 919-491-1332
ma rga [e-mail]
URS Corporation North Carolina/AECOM
1600 Perimeter Park Drive, Suite 400, Morrisville, NC 27560
T : 919-461-1100
www.aecom.com
This e-mail and any attachments contain AECOM confidential information that may be proprietary or privileged. If you receive this
message in error or are not the intended recipient, you should not retain, distribute, disclose or use any of this information and
you should destroy the e-mail and any attachments or copies.
Email correspondence to and from this sender is subject to the N.C. Pub!ic Records Law and may be disclosed to third parties.
4
URS LITHOLOG
IC LOG / WELL CONSTRUCTION LOG
PROJECT NO: 38438544
DATE BEGAN: 8125✓2010
DRILLER Wflilam B. Kicker
TOP OF CASING ELEVATION:
Not yet su
DRILLING METHOD: Hollow Stem Auger
CONTRACTOR: Mad Dawg, Inc.
preyed
BORING NO: AS-06
DATE FINISHED: 8i2512010
NORTH: Not yet surveyed
GWL DATE/TIME:
DRILL EQUIP: Air Knife; Hollow Sleet Auger
PROJECT NAME: BP 4782
FIELD ENGINEER: Scott A.: Smlda
EAST: Not yet surveyed
GWL DEPTH: 6 tt t gs
CHECKED BY: IJRS
ELEV
(FT.)
DEPTH
Fr.)
DRILLING
METHOD
SAMPLE
TYPE/
SAMPLE
NUMBER
Blow
Counts
DESCRIPTION
8
2
E
WELL CONSTRUCTION
0.0 0
-5.0
-5
Air
Knife
-10.0
-15.0
-10
-15
-20.0 -20
y Clay: reddish brown; Air Knife
backfill
Silty/Sandy Clay: reddish brown
to light brown, wet
Clayey Silt light brown, wet
Silty Sand: brown grading to light
brown, stiff, dry grading to wet
Concrete
:Pad
Locking
Well Cap
Steel Well
Vault
Bentonite
Plug
URSO
Air Sparge Well AS-06
BP Terminal 4762
7401 Old Mount Holly Road
Charlotte, North Carolina
43
M Eta -
SHEET:
AS406

URS LITHOLOGIC LOG / WELL CONSTRUCTION LOG
PROJECT NO: 38436544
DATE BEGAN: 8/25/2010
DRILLER:Willlam B. Kicker
TOP OF CASING ELEVATION: Not yet surveyed
DRILLING METHOD: Hollow Stem Auger
CONTRACTOR: Mad Dawg, Inc.
BORING NO: AS-06
DATE FINISHED: 8/25/2010
NORTH: Not yet surveyed
GWL DATE/TIME:
DRILL EQUIP: Air Knife; Hollow Stern Auger
ELEV
DEPTH
(FT)
-20.0 -20
-25.0
-25
DRILLING
METHOD
4.25
HSA
SAMPLE
TYPE!
SAMPLE
NUMBER
Now
Counts
w
a
0
rr
a_
DESCRIPTION
Partially Weathered Rock: silty
Sand, light brown, stiff, wet
0
+n
PROJECT NAME: BP 4762
FIELD ENGINEER: Scott A. Smida
EAST: Not yet surveyed
GWL DEPTH: 8 ft bgs
CHECKED BY: IJRS
SM
WELL CONSTRUCTION
W2 Fitter
Sand
0.010 Slot
Screen
URS
Air Sparge Well AS-06
BP Terminal 4762
7401 Old Mount Holly Road
Charlotte, North Carolina
1
0
eg 0
0 u)
SHEET.
AS-06

Central Files: APS _ SWP
= 5/21/2015
It Number W10300289 Permit Tracking Slip
Program Category
Deemed Ground Water
Permit Type
Injection Deemed Air Welt
Primary Reviewer
michael.ragers
Coastal SWRuIe
Permitted Flow
Facility
Status Project Type
Active New Project
Version Permit Classification
1.00 Individual
Permit Contact Affiliation
Facility Name
Charlotte Terminal
Location Address
7401 Old Mount Holly Rd
Charlotte
Owner
NC 28214
Major/Minor Region
Minor Mooresville
County
Mecklenburg
Facility Contact Affiliation
Owner Name
Marathon Petroleum Company LP Mpc
DateslEvents
Owner Type
Non-Govemment
Owner Affiliation
Mark Ehrman
8902 Vincennes Cir
New Augusta
IN 46268
Ortg Issue
5/21/2015
App Received
5/18/2015
(Draft Initiated
Scheduled
Issuance Public Notice Issue Effective
5/21/2015 5/21/2015
Rezulated Activities Requested /Received Events
Groundwater remediation
❑utfall
Expiration
Waterbody Narne
Streamindex Number Current Class Subbasin

Ro gers, Michael
From: Rogers, Michael
Sent:
To:
Thursday, May 21, 2015 4:00 PM
'[e-mail]'
Watson, Edward M; Parker, Michael; Pitner, Andrew·
RE: WI0300289 Notice to inject (NOi)-MPC Charlotte
Cc:
Subject:·
Thank you for submitting the Notice of Intent to Construct or Operate Injection Wells"(NOI) for the Marathon Petroleum
Company Charlotte Terminal located at 7401 Old Mount Holly Road, Charlotte, Mecklenburg_County, NC 28214. The
Central Office of the WQROS received your complete NOi on May 18, 2015. Please note the following:
• Please provide the GW-1 for the existing well proposed to be used for injection (AS06/BS22?). If the
GW-1 cannot be obtained, provi~e well construction info including depth, casing/screen, grouts,
installation date and well contractor;
• Please provide email address for Mark Ehrman w/Marathon Petr.oleuni in order for us to email a copy
of this NOi acknowledgement.
Please remember to submit the following regarding this injection activity:
1) Well Construction Records (GW-1) and Abandonment Records (GW-30) when completed. Please provide copies of
the GW-ls and GW-30s if not already submitted (originals go the address printed on the form). NOTE: Direct push
or Geo probe wells are considered wells and require construction {GW-1) and abandonment forms (GW-30). If well
construction/abandonment information is the same for the wells, only one form needs to be completed-just
indicate total number of injection points in the Comments/Remarks section of form. These forms can be found on
our website at http://portal.ncdenr.org/web/wq/aps/gwpro/reporting-forms.
2) Injection Event Records (IER). All injections, including air and passive systems require an IER. The IER can be
modified for air sparge wells (e.g., air flow 'continuous' for date or rate of injection, etc.).
You can scan and send these forms directly to me at [e-mail], send by fax to my attention at 919-
807-6406, or via regular mail to address below. When submitting the above forms, you will need to enter the nine-digit
alpha-numeric number on the form (i.e., WI0XXXXXX) that has been assigned to the injection activity at this site. This
notification has been given the deemed permit number WI0300289. This number is also referenced in the subject line of
this email. You may if you wish, scan and send back as attachments in re ply to this email , as it will already have the
assigned deemed permit number in the subject line.
Thank you for your cooperation.
Michael Rogers, P.G. (NC & FL)
Hydrogeologist
NCDENR-DWR
Water Quality Regional Operations Section
1636 Mail Service Center
Raleigh, NC 27699
Direct No. 9-19-807-6406
http://portal.ncdenr.org/web/wq/aps/gwpro/reporting-forms
1
NOTE: Per Executive Order No. 150, all e-mails sent to and from this account are subject to the North Carolina Public
Records Law and may be disclosed to third parties.
From: Watson, Edward M
Sent: Tuesday, May 19, 2015 1:28 PM
To: Rogers, Michael
Subject: FW: Notice to inject -MPC Charlotte
Mike,
Here is additional information that I requested for the contractor.
Regards,
Ed
From: Ness, Margaret [mailto:[e-mail]]
Sent: Tuesday, May 19, 2015 1:15 PM·
To: Watson, Edward M
Subject: RE: Notice to inject -MPC Charlotte
See below. Let me know if any other questions/clarifications.
From: Watson, Edward M [mailto:[e-mail]]
Sent: Tuesday, May 19, 2015 8:53 AM
To: Ness, Margaret
Subject: RE: Notice to inject -MPC Charlotte
Margaret,
I have received the Notice of Intent. DWR will issue a permit as a tracking number for this project. Are the injection
wells the proposed Bio-Sparge well locations as shown on the map submitted? Yes, that is correct.
The only thing being injected is air and no other medium? The description of proposed injection activities has been left
blank. Can you give me some information regarding your proposed injection activities? How many injection event are
proposed? What is that monitoring plan for post injection?
Only ambient air is to be injected. Proposed injection will be continuous. Each well will be operating at approximately
15 psi at each well head. Following startup/shakedown, monitoring will occur at least monthly while the system is in
operation. Groundwater gauging/sampling will occur semi-annually. The system operation is estimated to be 4 years. It
is anticipated that the semi-annual sampling will occur at least 1 year after system turn off (with additional semi-annual
or yearly sampling beyond for additional years). Sampling includes BTEX, MTBE, Napt, 1-DCA and field parameters
including DO.
This information will help with site review and provide background information.
The monitoring schedule will be needed to be able to provide information of the effectiveness of post injection bio-
remediation.
Thank you for providing the information.
Regards,
2
Edward Watson
North Carolina Dept. of Environment & Natural Resources
Division of Water Resources/ Water Quality Regional Operations Section
610 E. Center Ave., Suite 301
Mooresville, NC 28115
Ph: 704.663.1699 Fax: [phone]
****************************************************************************
E-mail correspondence to and from this address is subject to the North Carolina Public Records Law
and may be disclosed to third parties unless the content is exempt by statute or other regulation.
****************************************************************************
From: Ness, Margaret [mailto:[e-mail]]
Sent: Monday, May 18, 2015 5:24 PM
To: Watson, Edward M
Subject: Notice to inject -MPC Charlotte
Hi Ed,
Both forms are dated 3/2015 (your example and the one we submitted). I think I'm missing something ... ?
From: Watson, Edward M [mailto:edward.watson @ncdenr.gov]
Sent: Monday, May 18, 2015 3:37 PM
To: Ness, Margaret
Subject: RE: contact info -margaret ness
Here is the link to our internet site that includes permit and forms.
http ://portal.ncdner.org/web /aps/gw p ro/permit-a pp lication#ln-situRemed
If you have any questions, feel free to contact me.
Regards,
Ed
From: Ness, Margaret [mailto:[e-mail]]
Sent: Monday, May 18, 2015 3:25 PM
To: Watson, Edward M
Subject: contact info -margaret ness
Hi Ed,
This may be easier, to get my email address.
Margaret Ness, PG
Project Manager, Geosciences Department
D: 919-461-1423 C: 919-491-1332
margaret.ness @aecom.com
URS Corporation North Carolina/AECOM
1600 Perimeter Park Drive, Suite 400, Morrisville, NC 27560
3
T: 919-461-1100
www.aecom.com
This e-mail and any attachments contain AECOM confidential information that may be proprietary or privileged. If you receive this
message in error or are not the intended recipient, you should not retain, distribute, disclose or use any of this information and
you should destroy the e-mail and any attachments or copies.
4
Ro gers, Michael
From: Rogers, Michael
Sent:
To:
Thursday, May 21, 2015 3:59 PM
Watson, Edward M
Cc: Parker, Michael; Pitner, Andrew
Subject: RE: WI0300289 Notice to inject (NOi)-MPC Charlotte
Ed-
FYI, for the air sparge wells, only sections A-F, K, and N need to be completed. I saw below where you requested
additional info from the applicant as the form was blank is some sections. It is because the info is not required for these
types of wells. See Section A on the NOi. Thanks.
From: Watson, Edward M
Sent: Tuesday, May 19, 2015 1:28 PM
To: Rogers, Michael
Subject: FW: Notice to inject -MPC Charlotte
Mike,
Here is additional information that I requested for the contractor.
Regards,
Ed
From: Ness, Margaret [mailto:ma rg aret.ness @aecom.com]
Sent: Tuesday, May 19, 2015 1:15 PM
To: Watson, Edward M
Subject: RE: Notice to inject -MPC Charlotte
See below. Let me know if any other questions/clarifications.
From: Watson, Edward M [mailto:edward.watson @ncdenr.gov]
Sent: Tuesday, May 19, 2015 8:53 AM
To: Ness, Margaret
Subject: RE: Notice to inject -MPC Charlotte
Margaret,
I have received the Notice of Intent. DWR will issue a permit as a tracking number for this project. Are the injection
wells the proposed Bio-Sparge well locations as shown on the map submitted?-Yes, that is correct.
The only thing being injected is air and no other medium? The description of proposed injection activities has been left
blank. Can you give me some information regarding your proposed injection activities? How many injection event are
proposed? What is that monitoring plan for post injection?
Only ambient air is to be injected. Proposed injection will be continuous. Each well will b~ operating at approximately
15 psi at each well head. Following startup/shakedown, monitoring will occur at least monthly while the system is in
operation. Groundwater gauging/sampling will occur semi-annually. The system operation is estimated to be 4 years. It
is anticipated that the semi-annual sampling will occur at least 1 year after system turn off (with additional semi-annual
1
or yearly sampling beyond for additional years). Sampling includes BTEX, MTBE, Napt, 1-DCA and field parameters
including DO.
This information will help with site review and provide background information.
The monitoring schedule will be needed to be able to provide information of the effectiveness of post injection bio-
remediation.
Thank you for providing the information.
Regards,
Edward Watson
North Carolina Dept. of Environment & Natural Resources
Division of Water Resources/ Water Quality Regional Operations Section
610 E. Center Ave., Suite 301
Mooresville, NC 28115
Ph: 704.663.1699 Fax: [phone]
*******************************************f********************************
E-mail correspondence to and from this address is subject to the North Carolina Public Records Law
and may be disclosed to third parties unless the content is exempt by statute or other regulation.
****************************************************************************
From: Ness, Margaret [mailto:[e-mail]]
Sent: Monday, May 18, 2015 5:24 PM
To: Watson, Edward M
Subject: Notice to inject -MPC Charlotte
Hi Ed,
Both forms are dated 3/2015 (your example and the one we submitted). I think I'm missing something ... ?
From: Watson, Edward M [mailto:[e-mail]]
Sent: Monday, May 18, 2015 3:37 PM
To: Ness, Margaret
Subject: RE: contact info -margaret ness
Here is the link to our internet site that includes permit and forms.
http://portal.ncdner.org/web/aps/gwpro/permit-application#ln-situRemed
If you have any questions, feel free to contact me.
Regards,
Ed
From: Ness, Margaret [mailto:margaret.ness @aecom.com]
Sent: Monday, May 18, 2015 3:25 PM
To: Watson, Edward M
Subject: contact info -margaret ness
2
NORTH CAROLINA DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES
NOTIFICATION OF INTENT TO CONSTRUCT OR OPERATE INJECTION WELLS
The following are "permitted by rule" and do not require an individual permit when constructed in accordance
with the rules of ISA NC l C 02C.0200. This loan shall be submitted at least 2 weeks prior to injection.
AQUIFER TEST WELLS (15A NCAC 02C .0220)
These wells are used to inject uncontaminated fluid into an aquifer to determine aquifer hydraulic characteristics.
IN SITU REMEDIATION (t 3 A NCAC 02C .0225) or TRACER WELLS (I SA NCAC 02C .0229):
1) Passive Injection Systems - In -well delivery systems to diffuse injectants into the subsurface. Examples include
ORC socks, iSOC systems, and other gas infusion methods.
2) Small -Scale Infection Operations - Injection wells located within a Iand surface area not to exceed 10,000
square feet for the purpose of soil or groundwater remediation or tracer tests. An individual permit shalt be required
for test or treatment areas exceeding 10,000 square feet.
3) Pilot Tests - Preliminary studies conducted for the purpose of evaluating the technical feasibility of a
remediation strategy in order to develop a full scale remcdiation plan for future implementation, and where the
surface area of the injection zone wells are located within an area that does not exceed five percent of the land
surface above the known extent of groundwater contamination, An individual permit shall berequired to conduct
more than one pilot test on any separate groundwater contaminant plume.
4) Air Injection Wells - Used to inject ambient air to enhance in -situ treatment of soil or groundwater.
Print Clearly or Type Information. Illegible Submittals Will Be Returned As Incomplete.
DATE: , 20 PERMIT NO. tom- G} 3 try c' 1 ci (to be filled in by D W R)
(i' r--t C u; Pen-4.1 p r
A. WELL TYPE TO BE CONSTRUCTED OR OPERATED . [.] G l{, - i-c f°!' )) 5A/6)
B.
(1)
(2)
(3)
(4)
(5)
(6)
Air Injection Well Complete sections B-F, K, N
Aquifer Test Well ..Complete sections B-F, K, N
Passive Injection System Complete sections B-F, H-N ,�� �] �
Small -Scale injection Operation Complete sections B-N CC\V'�D
Pilot Test Complete sections B-N X%
00.0
Tracer Injection Well Complete sections H N hob,►1� 1
Ot
STATUS OF WELL OWNER: Chuosc an irer.
C. WELL OWNER - State name of entity and name of person delegated authority to sign on behalf of the
business or agency:
A
Name:
Mailing Address: If D E• lei uti-C✓v��1r
C�� :� n � , cL ! , €kk P 6
r]
City: LAdrarmctr1 i.3 State: 1 Ni Zip Code: Li-(2( $
Day Tele No.: 3 I / -
EMAIL Address:
County: ilaLr; crtl
Cell No..
Fax No.:
r nrs Fr_ o:.,. 11 I c%

D-
PROPERTY OWNER (if different than well owner)
Name:
Mailing Address:
City: State: Zip Code: County:
Day Tele No.: Cell No.:
EMAIL Address: Fax No.:
E. PROJECT CONTACT - Person who can answer technical questions about the proposed injection project.
Name: VI0.rc,,o.rr N .S
Lk,)A.'"N lea
Mailing Address: i:A ?to- t u+.s . r P:.r r '-'roo
City 4 r,,11
Day Tele No.: C ','' $ Y'(v4 —
EMAIL Address:
F. PHYSICAL LOCATION OF WELL SITE
(1) Physical Address:
(2)
State: Ai , Zip Code: V? Loo County ki" Le,
Cell No.:
Fax No.:
?L0, old Mt; A,•(- kGI 1
County:
City: C State: NC Zip Code: 7A
Geographic Coordinates: Latitude**: " or
Longitude`*: " or ; � °. riy
Reference Datum: Accuracy:
Method of Collection:
**FOR AIR INJECTION AND AQUIFER TEST WELLS ONLY: A FACILITY SITE MAP WITH PROPERTY
BOUNDARIES MAY BE SUBMITTED IN LIEU OF GEOGRAPHIC COORDINATES.
G. TREATMENT AREA
Land surface area of contaminant plume: square feet
Land surface area of inj. well network: square feet ( 10,000 ft2 for small-scale injections)
Percent of contaminant plume area to be treated: - (must be < 5% of plume for pilot test injections)
I3. INJECTION ZONE MAPS — Attach the following to the notification.
Contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the
contaminant plume in soil and groundwater. existing and proposed monitoring wells. and existing and
proposed injection wells; and
Cross-section(s) to the known or projected depth of contamination that show the horizontal and
vertical extent of the contaminant plume in soil and groundwater, changes in Ethology, existing and
proposed monitoring welts, and existing and proposed injection wells.
Potentiometric surface map(s) indicating the rate and direction of groundwater movement, plus
existing and proposed wells.
rrr!! Cis.. RPm..l hinriRreiinn (R0•.ric.rl Z171701 Cl

I.
DESCRIPTION OF PROPOSED INJECTION ACTIVITIES — Provide a brief narrative regarding the
purpose, scope, and goals of the proposed injection activity, This should include the rate, volume, and
duration of injection over time.
J. INJ1 CTANTS — Provide a MSDS and the following for each injectant. Attach additional sheets if necessary,
NOTE: Approved injectants (tracers and remediation additives) can be found online at
http:l/porterl ncdenr•.orz/avebhvg/apslgiipro. All other substances must be reviewed by the Division of Public
Health, Department of Health and Human Services. Contact the UIC Program for more info (919-807-6496).
Inj ectant:
Volume of injectant:
Concentration at point of injection:
Percent if in a mixture with other injectants:
lnjectant:
Volume of injectant:
Concentration at point of injection:
Percent if in a mixture with other injectants:
Inj ectant:
Volume of injectant:
Concentration at point of injection:
Percent if in a mixture with other injectants:
K. WELL CONSTRUCTION DATA
(1) Number of injection wells: as Proposed
(2)
Existing
Provide well construction details for each injection well in a diagrarn or table format. A single
diagram or line in a table can be used for multiple wells with the same construction details. Well
construction details shall include the following:
(a) well type as permanent, direct -push, or subsurface distribution system (infiltration gallery)
(b) depth below land surface of grout, screen, and casing intervals
(c) well contractor name and certification number
IDf.:..a.T7'J1A1C►
n._ __.

L. SCHEDULES — Briefly describe the schedule for well construction and injection activities.
M. MONITORING PLAN — Describe below or in separate attachment a monitoring plan to be used to determine
if violations of groundwater quality standards specified in Subchapter 02L result from the injection activity.
N. SIGNATURE OF APPLICANT AND PROPERTY OWNER
APPLICANT: 'I hereby certify, under penalty of Taw. that I am familiar with the information submitted in
this document and all attachments thereto and that based on my inquiry of those individuals immediately
responsible for obtaining said information. I believe that the information is true, accurate and complete. I am
aware that there are significant penalties, including the possibility offnes and imprisonment, for submitting
false information_ I agree to construct, operate. maintain, repair, and if applicable, abandon the injection well
and all related appurtenances in accordance with the 15A NCAC 02C 0200 Rules."
Signature of Applicant
Brett G, Schaefer, PE
Pant or Type Full Name
PROPERTY OWNE1t1if the property is not otiyned by the Hermit trpn3icaet):
"As owner of the property on which the infection well(s) are to be constructed and operated; I hereby consent
to allow the applicant w construct each injection well as outlined in this application and agree that it shall be
the responsibility of the applicant to ensure that the injection well(s) conform to the Well Construction
Standards (15A NCAC 02C .0200)."
"Owner" meant any person who holds the fee or other property rights in the well being constructed. A
well is real property and its construction on land shall bo deemed to vest ownership in the Sand owner, in
the absence of contrary agrrc tr tin writing_ , ye-------
l i
Stguaturea of Property Owner (if different from applicant)
Print OF Type Fail Name
An access agreement between the applicant and property owner may be submitted in lieu ofa signature on this form.
Submit the completed notification package to:
DWA — WC Program
1636 Mai] Service Center
Raleigh, NC 27699-1636
Telephone: (919) 8O7-6464
UICJIn Situ Reined. Notification (Revised 3/2/20t 5)

0
0
COVERED
LCADIN( J --0
RACK
B518
•
B516 •
VEO4
.. el
mw26
1
, . •
::: 7.47 L
. •
BS15 0 SVE14-Dt OFFICE WAREHOUSE0
• sVg .
06
B523 0
• ..' ' .
17-SO5DR :!.
el 2 sVEg--E8
..' • Sli,I5
• -- /
6814 5513 SVE81
VS0
61
13511;
M-I-2 0:'.4-4,,,!..-
psi° .(E,40iiirs:B525
•
•Bs22"
#7 #8
. El
00
B520 •
CW14
0516
•
••• •
pw0 6
•
B517.
Itvrry-•
Mw2fri"W-
7D W2
BS24
• --
APPROXIMATE PROPERTY LINE
BS4
•
BS5
• J BST ‘ •A
• BS6
REMEDIkTIGN-
EQUIPMENT BUILDING
'x24')
•
BS3
•,,P• .1
10k
BS2- agsi - -

0
1o0f
5
0
COVERED
LOADING
RACK
B518
•
BS17
•
B516• B524
VE04O
BS15. 5VE11 ..
8523 •
0
• . SVE10 SVE0 0 SVE8
BS14 B513 • 0
B512 •
BS11
AS0t. 8522
#7 #8
lj
BS21
E`
8520 �
n a TANK
eril.q:0$ 111
8519
• ▪ +�
I j.
DSVE3
OFFICE SVE2
#5 C✓'
`APPROXIMATE P
RQP! RTY LINE
—
•
SVE1
- •-B54
•
•
BS10
•
SVE7
B526
SVE6
•
SVE5
8825
5VE4 . J
.059
Et
BS7'•_...
• B56
853
B52 •-
BS5
_. REIVIED AT1eN-
EQUIPMENT BUILDING
'x24')
TANK
TANK
102
DRAFT
Legend
Treeline
Fence Line
- Property Line
Fire Hydrant
Lamp Post
Protective Steel Bollard
Power Pole
Groundwater Monitoring Well
• Proposed Biosparge Well (B53)
C) Proposed SVE Well (SVE2)
Gravel Area
NOTES:
1. Shallow groundwater flow is towards the SSW.
2. A lane must be open at all times to allow traffic
flow on paved portions of the work site unless
otherwise discussed during kickoff meeting.
3. Contractor will convert existing VEO4 into
SVE12 and AS06 into BS22.
0 60
NO.
DATE
BY
REVISION
WELL LAYOUT PLAN
MARATHON
MARATHON PETROLEUM
COMPANY
CHARLOTTE, NC
DRAWN BGS
CHECKED MN
DATE
5/18/14
SCALE
1 "=60'
FIGURE SIZE
FIGURE
1

12" x 12" WELL VAULT _
INTERIOR -1\
PLAN VIEW
1 "x}" REDUCER
2"x1" THREADED REDUCER
1" COMPRESSED MR
RATED HDPE PIPE FROM
EQUIPMENT COMPOUND
SAMPLE PORT FOR
MR FLOW/PRESSURE
MONITORING
2"x2"x1" GAL THREADED —1" GAL 90'
REDUCING TEE
2" GAL PIPE
2" PVC TO
GAL ADAPTER
2" PVC WELL CASING_
BIOSPARGE WELL
CROSS-SECTION
1" BRASS
BALL VALVE
1" GAL PIPE
1" HDPE TO GAL
ADAPTER
---T
1" COMPRESSED AIR
RATED HOPE PIPE
FROM EQUIPMENT
COMPOUND
TYPICAL BIOSPARGE WELLHEAD
CONSTRUCTION DETAILS
Contractor: S&ME, Inc_
Driller Name: Tom Whitehead
Well Contractor Cert.#: 2907-A
NOTES:
APPROXIMATELY
40'
BELOW
GROUND
SURFACE
TO BIOSPARGE WELLHEAD
24° MN
12"
24'
NCEMENT—BENTONITE
:— GROUT TO 36" BELOW
GRADE (TRENCH DEPTH)
HYDRATED BENTONITE
PELLET SEAL
—20/40 SAND
TYPICAL BIOSPARGE WELL
CONSTRUCTION DETAILS
—2in.OD 40urn SCHUMASOIL
HIGH DENSITY POROUS
POLYETHYLENE WELL SCREEN
APPROX. 8—INCH
BOREHOLE
1, WELL INSTALLATION WILL BE PERFORMED BY OTHERS.
CONTRACTOR TO CONSTRUCT VAULT AND CONNECT PIPING.
2. HDPE TO GALVANIZED AND PVC TO GALVANIZED ADAPTERS
SHALL BE SINGLE MOLDED TRANSITION FITTINGS.
3. WELL COMPLETION DETAIL IN CONCRETE !S TO BE UTILIZED
FOR WELL VAULTS LOCATED IN BOTH ASPHALTIC CONCRETE
AND PORTLAND CEMENT BASED CONCRETE AREAS OF THE
TERMINAL.
COMPLETE JOINT PER r
CSTD-0123-01-C
NOT TO SCALE
POURED FIBER
REINFORCED
CONCRETE PAD
EX]STtNG NEW
GRAVEL CONCiitlt
BEDDING
12' X 12'
r 2.
BIOSPARGE WELL
TRAFFIC RATED
STEEL WELL VAULT
I2'
PEA GRAVEL
FYPiCAL WELL SURFACE COMPLETION DETAIL IN GRAVEL PATH
(BS-17 THROUGH BS-24. AND BS-27)
POURED FIBER
REINFORCED
CONCRETE PAD
EXISTING NEW
CONCRETE CONCRETE
REDDING'
6'
F 2'
BIOSPARGE WELL
TRAFFIC RATED
STEEL WELL VAULT
36.
PEA GRAVEL
36' MIN CONCRETE
EXTENSION PER
GSTD-0123-02-C
TYPICAL WELL SURFACE COMPLETION DETAIL IN CONCRETE DRAFT
(13S-7 THROUGH 9S-17, BS-23, BS-25, BS-26)
BIDSPARGE WELL VAULT
DETAILS
M
MARATHON
MARATHON PETROLEUM
COMPANY
CHARLOTTE, NC
DRAWN BGS
CHECKED MN
DATE
5/19/14
SCALE
N.T.S.
FIGURE SIZE
H
FIGURE
2