Loading...
HomeMy WebLinkAboutNCG030717_2021 DMR_20210422NCDEQ Division of Energy, Mineral and Land Resources Stormwater Discharge Monitoring Report (DMR) Form for NCG030000 Metal Fabrication Click here for instructions Complete, sign, scan and submit the DMR via the Stormwater NPDES Permit Data Monitoring, Report (DMR) Upload form within 30 days of receiving sampling results. Mail the original, signed hard copy of the DMR to the appropriate DEMLR Regional Office. Certificate of Coverage No. NCG03 0717 Person Collecting Samples: Magdaline Tzannis /Shield Engineering, Inc. Facility Name: Jim Myers and Sons, Inc. Laboratory Name: Pace Analytical Services, LLC Facility County: Mecklenburg Laboratory Cert. No.: 329 Discharge during this period: ✓❑ Yes ❑ No (if no, skip to signature and date) Has your facility implemented mandatory Tier response actions this sample period for any benchmark exceedances? ❑✓ Yes ❑ No If so, which Tier (I, II, or III)? 1 A copy of this DMR has been uploaded electronically via https://edocs.deq.nc.gov/Forms/SW-DMR ❑✓ Yes ❑ No Date Uploaded: LI /Z2 hoZl Analytical Monitoring Requirements for Outfalls with Industrial Activities — Benchmarks in (Red) Parameter Parameter Outfall001 Outfall Outfall Outfall Outfall Code N/A Receiving Stream Class WS-V; B N/A Date Sample Collected MM/DD/YYYY 01/25/2021 46529 24-Hour Rainfall in inches 0.6 C0530 TSS in mg/L (100 or 50*) 76 00400 pH in standard units (6.0-9.0) 6.1 01119 Copper, total recoverable in mg/L 0.056 (0.010) 01051 Lead, total recoverable in mg/ L <0.010 (0.075) 01094 Zinc, total recoverable in mg/ L 0.32 0.126 78141 Total Toxic Organics (TTO) in mg/L(1) 0.768 (if required) 00552 Non -Polar Oil & Grease in mg/L (15) <5.0 Additional parameters for outfalls in drainage areas that use >55 gallons per month of new hydraulic oil on average Estimated New Motor/Hydraulic Oil NCOIL Usage in al/month NA NA * Outfalls to Outstanding Resource Waters (ORW), High Quality Waters (HQW), Trout Waters (Tr) and Primary Nursery Areas (PNA) have a benchmark TSS limit of 50 mg/L. All other water classifications have a benchmark of 100 mg/L Notes (optional): Exceedance of Copper and Zinc at SDO #001. "I certify by my signature below, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or those persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete. I am aware that there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations." 4/22/2021 of Permittee or Delegated Authorized Individual Date Email Address dfleetwood@jmsequipment.com Phone Number 704-544-8397 ext 1502