SW4201201_20200402_15262103173_25_Soil_Report_20201221

United States
Department of
Agriculture
A product of the National
Cooperative Soil Survey,
a joint effort of the United
States Department of
Agriculture and other
Federal agencies, State
agencies including the
Agricultural Experiment
Stations, and local
participants
Custom Soil Resource
Report for
Forsyth County,
North CarolinaNatural
Resources
Conservation
Service
April 2, 2020
Preface
Soil surveys contain information that affects land use planning in survey areas.
They highlight soil limitations that affect various land uses and provide information
about the properties of the soils in the survey areas. Soil surveys are designed for
many different users, including farmers, ranchers, foresters, agronomists, urban
planners, community officials, engineers, developers, builders, and home buyers.
Also, conservationists, teachers, students, and specialists in recreation, waste
disposal, and pollution control can use the surveys to help them understand,
protect, or enhance the environment.
Various land use regulations of Federal, State, and local governments may impose
special restrictions on land use or land treatment. Soil surveys identify soil
properties that are used in making various land use or land treatment decisions.
The information is intended to help the land users identify and reduce the effects of
soil limitations on various land uses. The landowner or user is responsible for
identifying and complying with existing laws and regulations.
Although soil survey information can be used for general farm, local, and wider area
planning, onsite investigation is needed to supplement this information in some
cases. Examples include soil quality assessments (http://www.nrcs.usda.gov/wps/
portal/nrcs/main/soils/health/) and certain conservation and engineering
applications. For more detailed information, contact your local USDA Service Center
(https://offices.sc.egov.usda.gov/locator/app?agency=nrcs) or your NRCS State Soil
Scientist (http://www.nrcs.usda.gov/wps/portal/nrcs/detail/soils/contactus/?
cid=nrcs142p2_053951).
Great differences in soil properties can occur within short distances. Some soils are
seasonally wet or subject to flooding. Some are too unstable to be used as a
foundation for buildings or roads. Clayey or wet soils are poorly suited to use as
septic tank absorption fields. A high water table makes a soil poorly suited to
basements or underground installations.
The National Cooperative Soil Survey is a joint effort of the United States
Department of Agriculture and other Federal agencies, State agencies including the
Agricultural Experiment Stations, and local agencies. The Natural Resources
Conservation Service (NRCS) has leadership for the Federal part of the National
Cooperative Soil Survey.
Information about soils is updated periodically. Updated information is available
through the NRCS Web Soil Survey, the site for official soil survey information.
The U.S. Department of Agriculture (USDA) prohibits discrimination in all its
programs and activities on the basis of race, color, national origin, age, disability,
and where applicable, sex, marital status, familial status, parental status, religion,
sexual orientation, genetic information, political beliefs, reprisal, or because all or a
part of an individual's income is derived from any public assistance program. (Not
all prohibited bases apply to all programs.) Persons with disabilities who require
2
alternative means for communication of program information (Braille, large print,
audiotape, etc.) should contact USDA's TARGET Center at [phone] (voice
and TDD). To file a complaint of discrimination, write to USDA, Director, Office of
Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410 or
call [phone] (voice) or [phone] (TDD). USDA is an equal opportunity
provider and employer.
3
Contents
Preface....................................................................................................................2
Soil Map..................................................................................................................5
Soil Map................................................................................................................6
Legend..................................................................................................................7
Map Unit Legend..................................................................................................8
Map Unit Descriptions..........................................................................................8
Forsyth County, North Carolina.......................................................................11
DaA—Dan River loam, 0 to 2 percent slopes, frequently flooded...............11
FaC—Fairview fine sandy loam, 6 to 10 percent slopes.............................12
FaD—Fairview fine sandy loam, 10 to 15 percent slopes...........................13
FcC2—Fairview clay loam, 6 to 10 percent slopes, moderately eroded.....14
FeE3—Fairview clay loam, 10 to 25 percent slopes, severely eroded........15
Gu—Gullied land.........................................................................................16
PcF2—Pacolet clay loam, 15 to 45 percent slopes, moderately eroded.....17
PoC—Poplar Forest fine sandy loam, 6 to 10 percent slopes.....................18
PpC2—Poplar Forest clay loam, 6 to 10 percent slopes, moderately
eroded...................................................................................................19
PpD2—Poplar Forest clay loam, 10 to 15 percent slopes, moderately
eroded...................................................................................................20
W—Water....................................................................................................21
4
Soil Map
The soil map section includes the soil map for the defined area of interest, a list of
soil map units on the map and extent of each map unit, and cartographic symbols
displayed on the map. Also presented are various metadata about data used to
produce the map, and a description of each soil map unit.
5
6
Custom Soil Resource Report
Soil Map
401010040102004010300401040040105004010600401010040102004010300401040040105004010600585800 585900 586000 586100 586200 586300 586400 586500 586600 586700
585800 585900 586000 586100 586200 586300 586400 586500 586600 586700
36° 14' 13'' N 80° 2' 46'' W36° 14' 13'' N80° 2' 6'' W36° 13' 52'' N
80° 2' 46'' W36° 13' 52'' N
80° 2' 6'' WN
Map projection: Web Mercator Corner coordinates: WGS84 Edge tics: UTM Zone 17N WGS84
0 200 400 800 1200
Feet
0 50 100 200 300
Meters
Map Scale: 1:4,580 if printed on A landscape (11" x 8.5") sheet.
Soil Map may not be valid at this scale.
MAP LEGEND MAP INFORMATION
Area of Interest (AOI)
Area of Interest (AOI)
Soils
Soil Map Unit Polygons
Soil Map Unit Lines
Soil Map Unit Points
Special Point Features
Blowout
Borrow Pit
Clay Spot
Closed Depression
Gravel Pit
Gravelly Spot
Landfill
Lava Flow
Marsh or swamp
Mine or Quarry
Miscellaneous Water
Perennial Water
Rock Outcrop
Saline Spot
Sandy Spot
Severely Eroded Spot
Sinkhole
Slide or Slip
Sodic Spot
Spoil Area
Stony Spot
Very Stony Spot
Wet Spot
Other
Special Line Features
Water Features
Streams and Canals
Transportation
Rails
Interstate Highways
US Routes
Major Roads
Local Roads
Background
Aerial Photography
The soil surveys that comprise your AOI were mapped at
1:15,800.
Warning: Soil Map may not be valid at this scale.
Enlargement of maps beyond the scale of mapping can cause
misunderstanding of the detail of mapping and accuracy of soil
line placement. The maps do not show the small areas of
contrasting soils that could have been shown at a more detailed
scale.
Please rely on the bar scale on each map sheet for map
measurements.
Source of Map: Natural Resources Conservation Service
Web Soil Survey URL:
Coordinate System: Web Mercator (EPSG:3857)
Maps from the Web Soil Survey are based on the Web Mercator
projection, which preserves direction and shape but distorts
distance and area. A projection that preserves area, such as the
Albers equal-area conic projection, should be used if more
accurate calculations of distance or area are required.
This product is generated from the USDA-NRCS certified data as
of the version date(s) listed below.
Soil Survey Area: Forsyth County, North Carolina
Survey Area Data: Version 19, Sep 16, 2019
Soil map units are labeled (as space allows) for map scales
1:50,000 or larger.
Date(s) aerial images were photographed: Mar 27, 2015—Oct
16, 2017
The orthophoto or other base map on which the soil lines were
compiled and digitized probably differs from the background
imagery displayed on these maps. As a result, some minor
shifting of map unit boundaries may be evident.
Custom Soil Resource Report
7
Map Unit Legend
Map Unit Symbol Map Unit Name Acres in AOI Percent of AOI
DaA Dan River loam, 0 to 2 percent
slopes, frequently flooded
2.1 2.8%
FaC Fairview fine sandy loam, 6 to
10 percent slopes
27.3 36.8%
FaD Fairview fine sandy loam, 10 to
15 percent slopes
4.1 5.6%
FcC2 Fairview clay loam, 6 to 10
percent slopes, moderately
eroded
1.2 1.6%
FeE3 Fairview clay loam, 10 to 25
percent slopes, severely
eroded
3.8 5.1%
Gu Gullied land 18.0 24.3%
PcF2 Pacolet clay loam, 15 to 45
percent slopes, moderately
eroded
4.6 6.2%
PoC Poplar Forest fine sandy loam,
6 to 10 percent slopes
0.0 0.0%
PpC2 Poplar Forest clay loam, 6 to 10
percent slopes, moderately
eroded
8.1 10.9%
PpD2 Poplar Forest clay loam, 10 to
15 percent slopes,
moderately eroded
4.8 6.4%
W Water 0.3 0.4%
Totals for Area of Interest 74.1 100.0%
Map Unit Descriptions
The map units delineated on the detailed soil maps in a soil survey represent the
soils or miscellaneous areas in the survey area. The map unit descriptions, along
with the maps, can be used to determine the composition and properties of a unit.
A map unit delineation on a soil map represents an area dominated by one or more
major kinds of soil or miscellaneous areas. A map unit is identified and named
according to the taxonomic classification of the dominant soils. Within a taxonomic
class there are precisely defined limits for the properties of the soils. On the
landscape, however, the soils are natural phenomena, and they have the
characteristic variability of all natural phenomena. Thus, the range of some
observed properties may extend beyond the limits defined for a taxonomic class.
Areas of soils of a single taxonomic class rarely, if ever, can be mapped without
including areas of other taxonomic classes. Consequently, every map unit is made
up of the soils or miscellaneous areas for which it is named and some minor
components that belong to taxonomic classes other than those of the major soils.
Custom Soil Resource Report
8
Most minor soils have properties similar to those of the dominant soil or soils in the
map unit, and thus they do not affect use and management. These are called
noncontrasting, or similar, components. They may or may not be mentioned in a
particular map unit description. Other minor components, however, have properties
and behavioral characteristics divergent enough to affect use or to require different
management. These are called contrasting, or dissimilar, components. They
generally are in small areas and could not be mapped separately because of the
scale used. Some small areas of strongly contrasting soils or miscellaneous areas
are identified by a special symbol on the maps. If included in the database for a
given area, the contrasting minor components are identified in the map unit
descriptions along with some characteristics of each. A few areas of minor
components may not have been observed, and consequently they are not
mentioned in the descriptions, especially where the pattern was so complex that it
was impractical to make enough observations to identify all the soils and
miscellaneous areas on the landscape.
The presence of minor components in a map unit in no way diminishes the
usefulness or accuracy of the data. The objective of mapping is not to delineate
pure taxonomic classes but rather to separate the landscape into landforms or
landform segments that have similar use and management requirements. The
delineation of such segments on the map provides sufficient information for the
development of resource plans. If intensive use of small areas is planned, however,
onsite investigation is needed to define and locate the soils and miscellaneous
areas.
An identifying symbol precedes the map unit name in the map unit descriptions.
Each description includes general facts about the unit and gives important soil
properties and qualities.
Soils that have profiles that are almost alike make up a soil series. Except for
differences in texture of the surface layer, all the soils of a series have major
horizons that are similar in composition, thickness, and arrangement.
Soils of one series can differ in texture of the surface layer, slope, stoniness,
salinity, degree of erosion, and other characteristics that affect their use. On the
basis of such differences, a soil series is divided into soil phases. Most of the areas
shown on the detailed soil maps are phases of soil series. The name of a soil phase
commonly indicates a feature that affects use or management. For example, Alpha
silt loam, 0 to 2 percent slopes, is a phase of the Alpha series.
Some map units are made up of two or more major soils or miscellaneous areas.
These map units are complexes, associations, or undifferentiated groups.
A complex consists of two or more soils or miscellaneous areas in such an intricate
pattern or in such small areas that they cannot be shown separately on the maps.
The pattern and proportion of the soils or miscellaneous areas are somewhat similar
in all areas. Alpha-Beta complex, 0 to 6 percent slopes, is an example.
An association is made up of two or more geographically associated soils or
miscellaneous areas that are shown as one unit on the maps. Because of present
or anticipated uses of the map units in the survey area, it was not considered
practical or necessary to map the soils or miscellaneous areas separately. The
pattern and relative proportion of the soils or miscellaneous areas are somewhat
similar. Alpha-Beta association, 0 to 2 percent slopes, is an example.
An undifferentiated group is made up of two or more soils or miscellaneous areas
that could be mapped individually but are mapped as one unit because similar
interpretations can be made for use and management. The pattern and proportion
Custom Soil Resource Report
9
of the soils or miscellaneous areas in a mapped area are not uniform. An area can
be made up of only one of the major soils or miscellaneous areas, or it can be made
up of all of them. Alpha and Beta soils, 0 to 2 percent slopes, is an example.
Some surveys include miscellaneous areas. Such areas have little or no soil
material and support little or no vegetation. Rock outcrop is an example.
Custom Soil Resource Report
10
Forsyth County, North Carolina
DaA—Dan River loam, 0 to 2 percent slopes, frequently flooded
Map Unit Setting
National map unit symbol: 2mp8h
Elevation: 200 to 1,400 feet
Mean annual precipitation: 40 to 48 inches
Mean annual air temperature: 50 to 59 degrees F
Frost-free period: 160 to 190 days
Farmland classification: Prime farmland if protected from flooding or not frequently
flooded during the growing season
Map Unit Composition
Dan river and similar soils: 85 percent
Minor components: 5 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Dan River
Setting
Landform: Flood plains
Down-slope shape: Linear
Across-slope shape: Linear
Parent material: Loamy alluvium derived from igneous and metamorphic rock
Typical profile
Ap - 0 to 18 inches: loam
Bw - 18 to 46 inches: loam
C1 - 46 to 55 inches: sandy loam
C2 - 55 to 72 inches: clay loam
C3 - 72 to 80 inches: loam
Properties and qualities
Slope: 0 to 2 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Runoff class: Low
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: About 30 to 60 inches
Frequency of flooding: Frequent
Frequency of ponding: None
Available water storage in profile: High (about 10.6 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 3w
Hydrologic Soil Group: C
Hydric soil rating: No
Minor Components
Hatboro, undrained
Percent of map unit: 5 percent
Landform: Depressions on flood plains
Custom Soil Resource Report
11
Down-slope shape: Concave
Across-slope shape: Linear
Hydric soil rating: Yes
FaC—Fairview fine sandy loam, 6 to 10 percent slopes
Map Unit Setting
National map unit symbol: 2mpjv
Elevation: 200 to 1,400 feet
Mean annual precipitation: 37 to 60 inches
Mean annual air temperature: 59 to 66 degrees F
Frost-free period: 200 to 240 days
Farmland classification: Farmland of statewide importance
Map Unit Composition
Fairview and similar soils: 80 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Fairview
Setting
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Parent material: Saprolite derived from granite and gneiss and/or schist
Typical profile
A - 0 to 8 inches: sandy loam
B - 8 to 27 inches: clay
BC - 27 to 35 inches: sandy clay loam
C - 35 to 80 inches: sandy loam
Properties and qualities
Slope: 6 to 10 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Runoff class: Medium
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 7.4 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 3e
Hydrologic Soil Group: B
Hydric soil rating: No
Custom Soil Resource Report
12
FaD—Fairview fine sandy loam, 10 to 15 percent slopes
Map Unit Setting
National map unit symbol: 2tqd9
Elevation: 660 to 1,310 feet
Mean annual precipitation: 43 to 47 inches
Mean annual air temperature: 57 to 59 degrees F
Frost-free period: 200 to 230 days
Farmland classification: Farmland of statewide importance
Map Unit Composition
Fairview and similar soils: 90 percent
Minor components: 10 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Fairview
Setting
Landform: Interfluves, ridges
Landform position (two-dimensional): Backslope, shoulder
Landform position (three-dimensional): Interfluve
Down-slope shape: Convex
Across-slope shape: Convex
Parent material: Saprolite residuum weathered from granite and gneiss and/or
saprolite residuum weathered from schist
Typical profile
Ap - 0 to 6 inches: fine sandy loam
BE - 6 to 9 inches: sandy clay loam
Bt - 9 to 25 inches: clay
BCt - 25 to 32 inches: clay loam
C - 32 to 76 inches: sandy clay loam
Properties and qualities
Slope: 10 to 15 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 7.7 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 3e
Hydrologic Soil Group: B
Hydric soil rating: No
Custom Soil Resource Report
13
Minor Components
Westfield
Percent of map unit: 5 percent
Landform: Interfluves, ridges
Landform position (two-dimensional): Backslope, shoulder
Landform position (three-dimensional): Interfluve
Down-slope shape: Convex
Across-slope shape: Convex
Hydric soil rating: No
Woolwine
Percent of map unit: 5 percent
Landform: Interfluves, ridges
Landform position (two-dimensional): Backslope, shoulder
Landform position (three-dimensional): Interfluve
Down-slope shape: Convex
Across-slope shape: Convex
Hydric soil rating: No
FcC2—Fairview clay loam, 6 to 10 percent slopes, moderately eroded
Map Unit Setting
National map unit symbol: 2mpk8
Elevation: 200 to 2,000 feet
Mean annual precipitation: 40 to 48 inches
Mean annual air temperature: 50 to 59 degrees F
Frost-free period: 160 to 200 days
Farmland classification: Farmland of statewide importance
Map Unit Composition
Fairview, moderately eroded, and similar soils: 85 percent
Minor components: 5 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Fairview, Moderately Eroded
Setting
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Parent material: Saprolite derived from schist and/or gneiss
Typical profile
Ap - 0 to 9 inches: sandy clay loam
Bt - 9 to 24 inches: clay
BC - 24 to 29 inches: clay loam
C - 29 to 80 inches: loam
Custom Soil Resource Report
14
Properties and qualities
Slope: 6 to 10 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Runoff class: Medium
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 7.5 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 3e
Hydrologic Soil Group: C
Hydric soil rating: No
Minor Components
Westfield, moderately eroded
Percent of map unit: 4 percent
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Hydric soil rating: No
Woolwine, moderately eroded
Percent of map unit: 1 percent
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Hydric soil rating: No
FeE3—Fairview clay loam, 10 to 25 percent slopes, severely eroded
Map Unit Setting
National map unit symbol: 2mpkj
Elevation: 200 to 1,400 feet
Mean annual precipitation: 37 to 60 inches
Mean annual air temperature: 50 to 59 degrees F
Frost-free period: 160 to 190 days
Farmland classification: Not prime farmland
Map Unit Composition
Fairview, severely eroded, and similar soils: 85 percent
Custom Soil Resource Report
15
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Fairview, Severely Eroded
Setting
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Parent material: Saprolite derived from granite and gneiss and/or schist
Typical profile
A - 0 to 3 inches: clay loam
Bt - 3 to 29 inches: clay
BC - 29 to 37 inches: clay loam
C1 - 37 to 52 inches: clay loam
C2 - 52 to 80 inches: loam
Properties and qualities
Slope: 10 to 25 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Runoff class: Medium
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 7.7 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 6e
Hydrologic Soil Group: B
Hydric soil rating: No
Gu—Gullied land
Map Unit Composition
Gullied land: 100 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Gullied Land
Setting
Parent material: Residuum weathered from mica schist and/or other micaceous
metamorphic rock
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 8e
Hydric soil rating: No
Custom Soil Resource Report
16
PcF2—Pacolet clay loam, 15 to 45 percent slopes, moderately eroded
Map Unit Setting
National map unit symbol: 2mpss
Elevation: 200 to 1,400 feet
Mean annual precipitation: 37 to 60 inches
Mean annual air temperature: 59 to 66 degrees F
Frost-free period: 200 to 240 days
Farmland classification: Not prime farmland
Map Unit Composition
Pacolet, moderately eroded, and similar soils: 85 percent
Minor components: 13 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Pacolet, Moderately Eroded
Setting
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Parent material: Saprolite derived from granite and gneiss and/or schist
Typical profile
Ap - 0 to 7 inches: sandy clay loam
Bt - 7 to 28 inches: clay
BC - 28 to 44 inches: sandy clay loam
C - 44 to 80 inches: sandy loam
Properties and qualities
Slope: 15 to 25 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Runoff class: High
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 7.6 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 4e
Hydrologic Soil Group: B
Hydric soil rating: No
Minor Components
Madison, moderately eroded
Percent of map unit: 10 percent
Custom Soil Resource Report
17
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Hydric soil rating: No
Spartanburg, moderately eroded
Percent of map unit: 3 percent
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Hydric soil rating: No
PoC—Poplar Forest fine sandy loam, 6 to 10 percent slopes
Map Unit Setting
National map unit symbol: 2mphn
Elevation: 200 to 1,400 feet
Mean annual precipitation: 37 to 60 inches
Mean annual air temperature: 59 to 66 degrees F
Frost-free period: 200 to 240 days
Farmland classification: Farmland of statewide importance
Map Unit Composition
Poplar forest and similar soils: 85 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Poplar Forest
Setting
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Parent material: Residuum weathered from mica schist and/or other micaceous
metamorphic rock
Typical profile
A - 0 to 5 inches: sandy loam
B - 5 to 29 inches: clay
BC - 29 to 34 inches: clay loam
C - 34 to 80 inches: sandy loam
Properties and qualities
Slope: 6 to 10 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Custom Soil Resource Report
18
Runoff class: Medium
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 8.3 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 3e
Hydrologic Soil Group: B
Hydric soil rating: No
PpC2—Poplar Forest clay loam, 6 to 10 percent slopes, moderately
eroded
Map Unit Setting
National map unit symbol: 2mphs
Elevation: 200 to 1,400 feet
Mean annual precipitation: 37 to 60 inches
Mean annual air temperature: 59 to 66 degrees F
Frost-free period: 200 to 240 days
Farmland classification: Farmland of statewide importance
Map Unit Composition
Poplar forest, moderately eroded, and similar soils: 85 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Poplar Forest, Moderately Eroded
Setting
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Parent material: Residuum weathered from mica schist and/or other micaceous
metamorphic rock
Typical profile
Ap - 0 to 6 inches: sandy clay loam
Bt - 6 to 26 inches: clay
BC - 26 to 34 inches: sandy clay loam
C - 34 to 80 inches: loam
Properties and qualities
Slope: 6 to 10 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Runoff class: Medium
Custom Soil Resource Report
19
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 8.3 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 3e
Hydrologic Soil Group: B
Hydric soil rating: No
PpD2—Poplar Forest clay loam, 10 to 15 percent slopes, moderately
eroded
Map Unit Setting
National map unit symbol: 2mpht
Elevation: 200 to 1,400 feet
Mean annual precipitation: 37 to 60 inches
Mean annual air temperature: 59 to 66 degrees F
Frost-free period: 200 to 240 days
Farmland classification: Farmland of statewide importance
Map Unit Composition
Poplar forest, moderately eroded, and similar soils: 85 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Poplar Forest, Moderately Eroded
Setting
Landform: Hillslopes on ridges
Landform position (two-dimensional): Backslope
Landform position (three-dimensional): Side slope
Down-slope shape: Linear
Across-slope shape: Convex
Parent material: Residuum weathered from mica schist and/or other micaceous
metamorphic rock
Typical profile
Ap - 0 to 6 inches: sandy clay loam
Bt - 6 to 26 inches: clay
BC - 26 to 34 inches: sandy clay loam
C - 34 to 80 inches: loam
Properties and qualities
Slope: 10 to 15 percent
Depth to restrictive feature: More than 80 inches
Natural drainage class: Well drained
Runoff class: Medium
Capacity of the most limiting layer to transmit water (Ksat): Moderately high to
high (0.57 to 1.98 in/hr)
Custom Soil Resource Report
20
Depth to water table: More than 80 inches
Frequency of flooding: None
Frequency of ponding: None
Available water storage in profile: Moderate (about 8.3 inches)
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 3e
Hydrologic Soil Group: B
Hydric soil rating: No
W—Water
Map Unit Composition
Water: 100 percent
Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Water
Interpretive groups
Land capability classification (irrigated): None specified
Land capability classification (nonirrigated): 8w
Hydric soil rating: No
Custom Soil Resource Report
21