HomeMy WebLinkAboutSW6200903_2020.10.16 - WINCHESTER - COVER LETTER TO NCDEQ STORMWATER 2nd SUBMITTAL_20201022
143 Charlotte Avenue, Suite 104
Sanford, North Carolina 27330
919-777-6010 phone
www.jthomasengineering.com
License No. C-3389
October 21, 2020
Mr. Corey Anen
Stormwater Program
NCDEQ Raleigh Regional Office
1628 Mail Service Center
Raleigh, North Carolina 27699
Reference: Stormwater Management Permit - SW6200903
Winchester Residential Subdivision
Hoke County, North Carolina
Dear Mr. Anen:
Please find enclosed the submittal package revised to address comments received via email on
October 14, 2020. Please consider the following responses to comments.
Comment/Responses
1. Sheet C7 show a swale labeled PC #2. This swale was not included in the calculations. Also,
Sheet C10 indicates that the northeast portion of DA PC #3 drains in the direction of PC #2.
If this area is assumed to be served by PC #1 the area that drains to PC #2 should be included
in DA PC #1.
JTE Response: The calculations have been revised to include PC #2. The drainage area map has
been updated to include the drainage area from PC#3 in the PC #1.
2. Sheet C7 indicates that the bottom width of most of the swales is 0 feet and the detail on
Sheet C17 shows the swales to be triangular. 15A NCAC 02H .1003(2)(d) requires that the
outlet swales be trapezoidal with a bottom width of at least two feet.
JTE Response: The Detail on Sheet C17 and the Permanent Channel Schedule on Sheet C7 has
been revised to specify swales that meet the requirements of 15A NCAC 02H .1003(2)(d).
3. Provide pdfs of all revisions, 2 hardcopies of revised plan sheets, and 1 hardcopy of other
documents. Pdfs must be uploaded using the form at:
https://edocs.deq.nc.gov/Forms/SW_Project_Submittal
Mr. Corey Anen
Resubmittal for SW6200903
October 21, 2020
Page 2 of 2
JTE Response: The submittal will be made as requested above.
If after review of the submittal package you have any questions, comments or if you require any
additional information please do not hesitate to contact the project manager, Michael Blakley, at
(919) 499-8759 or draftinganddesign@ymail.com. Thank you for your assistance.
Sincerely,
J Thomas Engineering, Inc.
Jeremy R. Thomas, P.E.
President