20191209 Ver 2_PLATINUM PAC (all grades) SDS (1)_20200729

Revision Date 15-Jun-12
Revision 1
Supersedes date 13-May-12
SDS No. 12588
SAFETY DATA SHEET
PLATINUM PAC* (ALL GRADES)
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1. Product identifier
Product name PLATINUM PAC* (ALL GRADES)
Synonyms, Trade Names PLATINUM PAC*, PLATINUM PAC UL*
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Oil well drilling fluid additive.
1.3. Details of the supplier of the safety data sheet
M-I SWACOSupplier
A Schlumberger Company
Woodlands Drive,
Kirkhill Industrial Estate,
Dyce, Aberdeen AB21 0GW.
Scotland UK
T = [phone]
F = [phone]
E-mail = [e-mail]
1.4. Emergency telephone number
(24 Hour) Australia [phone], Asia Pacific [phone], China [phone], Europe [phone], Middle East and
Africa [phone], New Zealand [phone], USA 001 281 561 1600.
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
Classification (1999/45/EEC)Not classified.
2.2. Label elements
Risk Phrases
NC Not classified.
Safety Phrases
NC Not classified.
2.3. Other hazards
Not Classified as PBT/vPvB by current EU criteria.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
POLYANIONIC CELLULOSE 60-100%
Classification (67/548/EEC)
Not classified.
Classification (EC 1272/2008)
Not classified.
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
Composition Comments
The data shown is in accordance with the latest EC Directives.
SECTION 4: FIRST AID MEASURES
61/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
4.1. Description of first aid measures
Inhalation
Move the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Get medical attention if any discomfort
continues.
Ingestion
Do not induce vomiting. Immediately give a couple of glasses of water or milk, provided the victim is fully conscious. Get medical attention if
any discomfort continues.
Skin contact
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if symptoms occur after
washing.
Eye contact
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation.
Irritation of nose, throat and airway.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged skin contact may cause redness and irritation.
Eye contact
May cause temporary eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Get medical attention if any discomfort continues.
SECTION 5: FIREFIGHTING MEASURES
5.1. Extinguishing media
Extinguishing media
Use fire-extinguishing media appropriate for surrounding materials.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products
When heated, vapours/gases hazardous to health may be formed.
Unusual Fire & Explosion Hazards
High concentrations of dust may form explosive mixture with air.
5.3. Advice for firefighters
Special Fire Fighting Procedures
Containers close to fire should be removed immediately or cooled with water.
Protective equipment for fire-fighters
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective clothing as described in Section 8 of this safety data sheet.
6.2. Environmental precautions
Do not allow to enter drains, sewers or watercourses.
6.3. Methods and material for containment and cleaning up
Avoid generation and spreading of dust. Remove spillage with vacuum cleaner. If not possible, collect spillage with shovel, broom or the like.
Ensure that waste and contaminated materials are collected and removed from the work area as soon as possible in a suitably labelled
container. Product becomes slippery when wet.
6.4. Reference to other sections
Wear protective clothing as described in Section 8 of this safety data sheet.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for safe handling
Avoid inhalation of dust and contact with skin and eyes. Avoid handling which leads to dust formation.
62/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
7.2. Conditions for safe storage, including any incompatibilities
Store in tightly closed original container in a dry, cool and well-ventilated place.
7.3. Specific end use(s)
The identified uses for this product are detailed in Section 1.2.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Ingredient Comments
NUI = Nuisance dust, WEL TWA 4mg/m3 Respirable Dust, 10 mg/m3 Total Dust.
8.2. Exposure controls
Protective equipment
Process conditions
All chemical Personal Protective Equipment (PPE) should be selected based on an assessment of both the chemical hazard present and the
risk of exposure to those hazards. The PPE recommendations below are based on an assessment of the chemical hazards associated with this
product. Where this product is used in a mixture with other products or fluids, additional hazards may be created and as such further
assessment of risk may be required. The risk of exposure and need of respiratory protection will vary from workplace to workplace and should
be assessed by the user in each situation.
Engineering measures
Provide adequate general and local exhaust ventilation.
Respiratory equipment
In case of inadequate ventilation or risk of inhalation of dust, use suitable respiratory equipment with particle filter (type P2).
Hand protection
For prolonged or repeated skin contact use suitable protective gloves. Use protective gloves made of: Nitrile. or Neoprene.
Eye protection
Wear approved chemical safety goggles where eye exposure is reasonably probable.
Other Protection
Wear appropriate clothing to prevent any possibility of skin contact. Provide eyewash station.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance Solid
Colour White to yellow
Odour Odourless.
Solubility Soluble in water.
Relative density 0.3-0.5 sg
Bulk Density 300-900 kg/m3
pH-Value, Diluted Solution 6.0-8.5 @ 1%
9.2. Other information
Not relevant
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stable under normal temperature conditions and recommended use.
10.3. Possibility of hazardous reactions
Not known.
10.4. Conditions to avoid
63/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
Avoid heat, flames and other sources of ignition. Avoid contact with water.
10.5. Incompatible materials
Materials To Avoid
Avoid contact with: Strong oxidising substances.
10.6. Hazardous decomposition products
When heated, vapours/gases hazardous to health may be formed.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1. Information on toxicological effects
Aspiration hazard:
Not anticipated to present an aspiration hazard based on chemical structure.
Inhalation
Dust may irritate respiratory system or lungs.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged and frequent contact may cause redness and irritation.
Eye contact
Particles in the eyes may cause irritation and smarting.
Route of entry
No route of entry noted.
Target Organs
No specific target organs noted
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity
Contact M-I SWACO's QHSE Department for ecological information at [e-mail].
12.1. Toxicity
Acute Fish Toxicity
Not considered toxic to fish.
12.2. Persistence and degradability
Degradability
There are no data on the degradability of this product.
12.3. Bioaccumulative potential
Bioaccumulative potential
No data available on bioaccumulation.
12.4. Mobility in soil
Mobility:
The product is soluble in water.
12.5. Results of PBT and vPvB assessment
Not Classified as PBT/vPvB by current EU criteria.
12.6. Other adverse effects
None known.
64/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Recover and reclaim or recycle, if practical. Dispose of waste and residues in accordance with local authority requirements.
SECTION 14: TRANSPORT INFORMATION
General The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,
ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
Not applicable.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally Hazardous Substance/Marine Pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not applicable.
SECTION 15: REGULATORY INFORMATION
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Uk Regulatory References
Chemicals (Hazard Information & Packaging) Regulations. Control of Substances Hazardous to Health Regulations 2002 (as amended)
Workplace Exposure Limits EH40.
EU Legislation
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and
repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and
Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.
Water hazard classification
WGK 1
15.2. Chemical Safety Assessment
International Chemical Inventories
Contact [e-mail] for REACH information. Complies with the following national/regional chemical inventory requirements:
Australia (AICS), Canada (DSL / NDSL), China (IECSC), Europe (EINECS / ELINCS), Japan (METI / ENCS), Korea (TCCL / ECL), New
Zealand (NZIoC), Phillipines (PICCS), United States (TSCA).
SECTION 16: OTHER INFORMATION
Abbreviations and acronyms used in the safety data sheet
*a mark of M-I L.L.C.
General information
HMIS Health -1 HMIS Flammability - 1 HMIS Physical Hazard - 0 E - Safety glasses, Gloves, Dust Respirator
Information Sources
Product information provided by the commercial vendor(s). Material Safety Data Sheet, Misc. manufacturers. LOLI. European Chemicals
Bureau - ESIS (European Chemical Substances Information).
Revision Comments
General revision. Compiled or revised by Sarah Malone
65/
SDS No. 12588
PLATINUM PAC* (ALL GRADES)
Issued By Bill Cameron
Revision Date 15-Jun-12
Revision 1
Supersedes date 13-May-12
SDS No.12588
Risk Phrases In Full
Not classified.NC
Disclaimer
MSDS furnished independent of product sale. While every effort has been made to accurately describe this product, some of the data are obtained from
sources beyond our direct supervision. We cannot make any assertions as to its reliability or completeness; therefore, user may rely only at user's risk. We
have made no effort to censor or conceal deleterious aspects of this product. Since we cannot anticipate or control the conditions under which this
information and product may be used, we make no guarantee that the precautions we have suggested will be adequate for all individuals and/or situations. It
is the obligation of each user of this product to comply with the requirements of all applicable laws regarding use and disposal of this product. Additional
information will be furnished upon request to assist the user; however, no warranty, either expressed or implied, nor liability of any nature with respect to this
product or to the data herein is made or incurred hereunder.
66/