WI0300045_Staff Report_20200717

Permit No. WI0300045
Date: July 15, 2020 County: Rowan
To: Michael Rogers UIC Permitting
Permittee/Applicant: (Owner) William T. White, Director of Facilities
Central Office Reviewer Facility Name: Catawba College
L GENERAL INFORMATION
1. This application is (check all that apply)
a. Date of Inspection: 07/15/2020
❑ New ® Renewal
❑ Minor Modification ❑ Major Modification
b. Person contacted and contact information: William (Billy) White [phone]
c. Site visit conducted by: Edward Watson, Hydrogeologist
d. Inspection Report Printed from BIMS attached: ❑ Yes ® No, but available in BIMSILaserFiche
e. Physical Address of Site including zip code: 2300 West Innes Street, Salisbury, NC 28144
L Driving Directions if rural site and/or no physical address:
g. Latitude: Longitude:
Source of Lat./Long & Accuracy (i.e., Google Earth, GPS, etc.): GCS WGS 1984 to nearest 10 seconds.
IL DESCRIPTION OF INJECTION WELL (S) AND FACILITY
1. Type of injection system:
® Geothermal Heating/Cooling Water Return
❑ In situ Groundwater Remediation
❑ Non -Discharge Groundwater Remediation
❑ Other (Specify:
2. For Geothermal Water Return Well(s) only
a. For existing geothermal system only:
Were samples collected from Influent/Effluent sampling ports? ® Yes ❑ No. Wells will be sampled
by Catawba College and sampling parameters and locations were clarified.
Provide well construction information from well tag: Well tags were not observed during the site visit.
The MRO has the GW-1 well Construction Records for the UIC wells.
b. Does existing or proposed system use same well for water source and injection? ❑ Yes ® No
If No, please provide source/supply well construction info (i.e., depth, date drilled, well contractor,
etc.) and attached map and sketch location of supply well in relation to injection well and any other
features in Section IV of this Staff Report.
3. Quality of drainage at site: ® Good ❑ Adequate ❑ Poor
4. Flooding potential of site: ® Low ❑ Moderate ❑ High
5. Does the map included in the Application reasonably represent the actual site (property lines, wells, surface
drainage)? ® Yes ❑ No. If No, or no map, please attach a sketch of the site. Show property boundaries,
buildings, wells, potential pollution sources, roads, approximate scale, and north arrow.

III. E VAL UA TION AND RECOMMENDATIONS
1. Do you foresee any problems with issuance/renewal of this permit? ❑ Yes ® No. If Yes, explain.
2. List any items that you would like WQROS Central Office to obtain through an additional information request.
Make sure that you provide a reason for each item:
Item Reason
3. List specific special conditions or compliance schedules that you recommend to be included in the permit when
issued. Make sure that you provide a reason for each special condition:
4. Recommendation
5
Condition Reason
❑ Deny. If Deny, please state reasons:
❑ Hold pending receipt and review of additional information by Regional Office
❑ Issue upon receipt of needed additional information
® Issue
Signature of Report Preparer(s): Edward Watson
7/15/2020
EDOCUSigned by:
A N Nuft
F161FB6g MUA3...
Signature of WQROS Regional Supervisor: Date:
7.17.2020
IV. ADDITIONAL REGIONAL STAFF REVIEW COMMENTS/ATTACHMENTS (Optional / If Needed)
Well samples are to be collected by the contractor. Commercial laboratory will supply sample bottles and
preservatives for G W samples. MRO has provided sample sheets for Influent and Effluent wells. These sample
collection sheets include sample parameter information andpreservation method requirements for the G W
samples.
Note that staff turnover at Catawba College has resulted in loss of institutional knowledge. MROprovided
copies of our files to Catawba College staff to aid in their knowledge of the system.