NCG170220_Inspection Report_20200701

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
BRIAN WRENN
Director
Sattler Corporation
Attention: David Rivers
447 Main Street
Hudson, North Carolina 28638
NORTH CAROLINA
Environmental Quality
July 1, 2020
Subject: Compliance Evaluation Inspection
Permit: NCG170000
Certificate of Coverage: NCG170220
Caldwell County, North Carolina
Dear Mr. Rivers:
Enclosed please find a copy of the Compliance Evaluation Inspection Report for the
inspection I conducted at the subject facility on June 17, 2020.
The report should be self-explanatory; however, should you have any questions
concerning this report, please do not hesitate to contact me at [phone] or by email
at [e-mail].
Since
Isaiah Reed, CP WQ, CEPSCI, MS4CECI
Environmental Specialist
Land Quality Section
Enclosure: Inspection Report
D_EQ.1, North Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
'�J/p Asheville Regional Office 1 2090 U.S. Highway 701 Swannanoa, North Carolina 28778
Nome rwaourvn G
v.peien.m m Fnvwn....... 828.296A500

Compliance Inspection Report
Permit: NCG170220 Effective: 08/01/19 Expiration: 05/31/24 Owner: Sattler Corporation
SOC: Effective: Expiration: Facility: Sattler Corporation
County: Caldwell 447 Main St
Region: Asheville
Hudson NC 28638
Contact Person: David Rivers Title: Phone: [phone]
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 06/17/2020
Primary Inspector: Isaiah L Reed
Secondary Inspector(s):
Certification:
Phone:
Entry Time 03:15PM Exit Time: 03:30PM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Textile Mill Products Stormwater Discharge COC
Facility Status: ❑ Compliant ❑ Not Compliant
Question Areas:
Storm Water
(See attachment summary)
Page 1 of 3

Permit: NGG170220 Owner- Facility: Sattler Corporation
Inspection Date: 06/1712020 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
On June 17, 2020 this facility was visited for the purpose of conducting a compliance inspection. No personnel were
available at the facility at the time of the inspection. This facility will be re -inspected on or after July 29, 2020. If Sattler is
operating on a reduced schedule, please inform this office of the current hours of operation.
If you have any questions, please contact this office at [phone]
Page 2 of 3

Permit: NGG170220 Owner - Facility: Sattler Corporation
Inspection Date: 06/17/2020 Inspection Type :Compliance Evaluation Reason for Visit: Routine
Page 3 of 3