NCG080298_COMPLETE FILE - HISTORICAL_20190613

y7v)
STORMWATER DIVISION CODING SHEET
NCG PERMITS
PERMIT NO.
/V
DOC TYPE
HISTORICAL FILE
❑ MONITORING REPORTS
DOC DATE
❑
YYYYMMDD

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
WILLIAM E. (TOBY) VINSON, JR.
Interim Dlrecror
Stegall Milling Co Incorporated
Attention: Zach Stegall
307 Cross Street
Marshville NC 28103
NORTH CAROLINA
Environmental Quality
June 13, 2019
Subject: Compliance Evaluation Inspection.
Stegall Milling Co Incorporated
NPDES Stormwater Certificate of Coverage- NCGO80298
Union County, North Carolina
Dear Mr. Stegall:
Enclosed please find a copy of the Compliance Evaluation Inspection Report for
the inspection we conducted at the Stegall Milling in Marshville on June 11, 2019.
Please note that in the stormwater inspection report summary we ask that you apply
for a No Exposure Certification once all outside material storage has ceased
The report should be self-explanatory; however, should you have any questions,
please do not hesitate to contact me at [phone] or by E-mail at
[e-mail].
Enclosure
c: Stormwater Permitting Branch
Sincerely,
A=Moore
Assistant Regional Engineer
k.tt� �i�•ti ...Ti`P...
y /
North Carolina Department of Environmental Quality I Division of Energy. Mineral and Land Resources
Mooresville Regional Office 1 610 East Center Avenge, suite 301 1 Mooresville; North Carolina 28115
704.663.1699

Permit: NCGO80298
SOC:
County: Union
Region: Mooresville
Contact Person: Tom Stegall
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 06/11/2019
Primary Inspector: Lily C Kay
Secondary Inspector(s):
Compliance InsiRection Report
Effective: 11/01/18 Expiration: 05131/21 Owner : Stegall Milling Co Inc
Effective: Expiration: Facility. Stegall Milling Cc Incorporated
307 Cross St
Marshville NC 28103
Title: Phone: [phone]
Certification: Phone:
Entry Time: 10:30AM Exit Time: 11:00AM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Transportation w/Vehicle Maintenance/Petroleum Buikldil Water Separator Stormwater Discharge COC
Facility Status: ❑ Compliant Not Compliant
Question Areas:
Storm Water
(See attachment summary)
Page 1 of 3

a
Permit: NCGO80298 owner - Facility: Stegall Milling Co Inc
Inspection Date: 06/11/2019 Inspection Type: Compliance Evaluation Reason for Visit: Routine
Inspection Summary -
Stegall Milling.is a transportation facility for fowl products. They are currently under the correct general permit, but the
facility does not have much outside storage of materials. If those materials are removed, the permittee can apply for a "No
Exposure Certification" with the Raleigh office by going to
httpsl/deq.nc.gov/about/divisionslenergy-mineral-land-resources/npdes-no-exposure and following the instructions on that
page. If you have any questions, please contact me at Lily. [e-mail] or by phone at [phone].
Page 2 of 3