NCG030070_MONITORING INFO_20190204

42 0
STORMWATER DIVISION CODING SHEET
NCG PERMITS
PERMIT NO.
/v
p3no7 u
DOC TYPE
❑HISTORICAL FILE
MONITORING REPORTS
DOC DATE
o Jul 0 UJ o y
YYYYMMDD

Al 1! It
F%IP IP
January 28, 2020
Central files
Division of Water Resources
1617 Mail Service Center
Raleigh, NC 27699-1617
Re: ABB Motors and Mechanical (Baldor Electric)
General Permit No. NCG0030070
ABB Motors and Mechanical
70 Reems Creek Rd
Weaverville, NC 28787
FEB 0 4 20 t9
CEN'TFzgL FILES
DVWI� SECT101j
Please find enclosed the stormwater discharge monitoring reports for November and
December 2019. In November we performed the second semi-annual sampling. We were
unable to collect a representative sample in December.
The November results for conveyance point G exceed the benchmarks for zinc, copper and
`ss, This elevates us to Tier II status for copper and zinc. We are currently researching
possible causes for these exceedances. We remain in Tier II status for copper and zinc at
conveyance point D.
No significant process sources of zinc or copper have been identified at our facility. We
continue to believe that the major contributors are infrastructure sources.
Please contact me with operational or compliance issues. Otherwise contact Dan March of
Pisgah Environmental Services at 828-768-3335 or via email at Pisgah -air cg t.edu if you
have questions or comments concerning technical aspects of this report.
Sincer ly.
X�� A4V__t/_
Gary Massey
Safety Coordinator
ABB Motors and Mechanical
828-645-1718
gary.masse a,us.abb.com
Page 1 of 1

r�
Stormwater Discharge Monitoring Report
for North Carolina Division of Energy, Mineral and L nd esources General Permit No. NCG030000
Date submitted l Z� �Lo
CERTIFICATE OF COVERAGE NO. NCG03 0 0 7 0
FACILITY NAME Ass Motors and Mechanical
COUNTY Buncombe
PERSON COLLECTING SAMPLES Dan March, Pisgah Environmental
LABORATORY Pace analytical Lab Cert. # 40
Comments on sample collection or analysis:
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR 2019
SAMPLE PERIOD ❑ Jan -June ❑ July -Dec
or El Monthly' (month)
CDISCHARGING TO CLASS ❑ORW ❑HQW ■❑Trout ❑PNA
CU ���
l.� ED []zero -flow ❑Water supply ❑SA
FEB 0-4 2Q19 ❑other
Lhi-i AL FILEC PLEASE REMEMBER TO SIGN ON PAGES 2 AND/OR 3 4
DWR SECTION
© No discharge this period?'
Outfall No.
Date Sample
Collected'
(mo/dd/yr)
24-hour rainfall
amount,
Inches'
Total Suspended Solids
pH,
standard units
Total Copper
Total Lead
Total Zinc
Non -Polar O&G/
Total Petroleum
Hydrocarbons
Total Toxic
Organicss
Benchmarks
_
-
100 mg/L or 50 mg/O
6.0 — 9.0
0.010 mg/L
0.075 mg/L
0.126 mg/L
15 mg/L
1 mg/L
Parameter Code
-
46529
C0530
00400
01119
01051
01094
00552
78141
No Discharge
' Monthly sampling (instead of semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
'The total precipitation must be recorded using data from an on -site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
° See General Permit, Section B, Table 1 to identify the especially sensitive receiving water classifications where the more protective benchmark applies.
s Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2018-05/31/2021
5WU-245, last revised 11/1/2018
Page 1 of 3

f
Facilities that incorporate a solvent management plan into the Stormwater Pollution Prevention Plan may so certify, and the requirement for TTO monitoring
may be waived. The solvent management plan shall include a list of the total toxic organic compounds used and the other elements listed in the General
Permit. For those facilities electing to employ the TTO monitoring waiver, the discharger shall sign the following certification statement:
"Based upon my inquiry of the person or persons directly responsible for managing compliance with the permit monitoring requirement for total toxic organics
(TTO), I certify that to the best of my knowledge and belief, no dumping of concentrated toxic organics into the stormwater or areas which are exposed to rainfall or
stormwater runoff has occurred since filing the last discharge monitoring report. I further certify that this facility is implementing the all the provisions of the
solvent management plan included in the Stormwater Pollution Prevention Plan."
Dale Spivey
Name (Print name)
Plant Manager
T e (Print title)
v4 I-Z�-�
Signature Date
Note: Results must be reported in numerical format. Do not report Below Detection Limit, BDL, <PQL, Non -detect, ND, or other similar non -numerical
format. When results are below the applicable limits, they must be reported in the format, "<XX mR/L", where XX is the numerical value of the detection
limit, reporting limit, etc. in mg/L.
Note: if you rep art a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Part B: Vehicle Maintenance Area Monitoring Results: only for facilities averaging > 55 gal of new oil per month.
❑ No discharge this period?'
Outfall No.
Date Sample Collected'
(mo/dd/yr)
24-hour rainfall amount,
inches'
New Motor Oil or
Hydraulic Oil Usage
Non -Polar O&G/ Total
Petroleum Hydrocarbons
Total Suspended
Solids
Benchmarks
-
-
15 mg/L
100 mg/L or 50 mg/O
Parameter Code
-
46529
NCOIL
00552
C0530
Footnotes from Part A also apply to Part B
Note: if you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Permit Date: 11/1/2018-05/31/2021 SWU-245, last revised 11/1/2018
Page 2 of 3

FOR PART A AND PART B MONITORING RESULTS:
• A BENCHMARK EXCEEDANCE TRIGGERS TIER 1 REQUIREMENTS. SEE PERMIT PART II SECTION B.
• 2 EXCEEDANCES IN A ROW FOR THE SAME PARAMETER AT THE SAME QUTFALL TRIGGER TIER 2 REQUIREMENTS. SEE PERMIT PART It SECTION B.
• TIER 3: HAS YOUR FACILITY HAD 4 OR MORE BENCHMARK EXCEEDENCES FOR THE SAME PARAMETER AT ANYONE QUTFALL? YES 0 NO ❑
1F YES, HAVE YOU CONTACTED THE DEMLR REGIONAL OFFICE? YES [] NO ❑
REGIONAL OFFICE CONTACT NAME: StanieyAiken
Mail an original copy of this DMR including all "No Discharge" reports, within 30 days o recei t of the lab results or at end of monitoring period in the
case o "No Discharge" re orts to:
Division of Water Quality
Attn: DWQ Central Files
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
YOU MUST SIGN THIS CERTIFICATION FOR ANY INFORMATION REPORTED:
"I certify, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to
assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or
those persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete. I
am aware that there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations."
Signature of Permittee
l - 28 -Zd
Date
Permit Date: 11/1/2018-05/31/2021 SWU-245, last revised 11/1/2018
Page 3 of 3

\,rr
Stormwater Discharge Monitoring Report
for North Carolina Division of Energy, Mineral and Land Resources General Permit No. NCG030000
Date submitted 01/28/2020
CERTIFICATE OF COVERAGE NO. NCG03 0 0 7 0
FACILITY NAME ASS Motors and Mechanical
COUNTY Buncombe
PERSON COLLECTING SAMPLES Dan March, Pisgah Envi
LABORATORY Pace Anatytical Lab Cert. ## 40
Comments on sample collection or analysis:
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR 2019
SAMPLE PERIOD ❑ Jan -June Q July -Dec
or ❑ Monthly' (month)
DISCHARGING TO CLASS ❑ORW ❑HQW ME Trout ❑PNA
❑Zero -flow ❑Water Supply ❑SA
❑Other
PLEASE REMEMBER TO SIGN ON PAGES 2 AND/OR 3 -->
❑ No discharge this period?'
Outfall No.
Date Sample
Collected'
(mo/dd/yr)
24-hour rainfall
amount,
Inches'
Total Suspended Solids
pStandard units
Total Copper
Total lead
Total Zinc
Non -Polar O&G/
Total Petroleum
Hydrocarbons
TotalToxic
Organicnits
Benchmarks
-
-
100 mg/L or 50 mg/L°
6.0 -- 9.0
0.010 mg/L
0.075 mg/L
0.126 mg/L
15 mg/L
1 mg/L
Parameter Code
-
46529
C0530
00400
01119
01051
01094
00552
78141
B
11/23/19
.22
12.0
6.2
<.005
<.005
.151
<4.8
C
11/23/19
.22
14.8
6.4
.0076
..0064
.0994
<4.8
D
11/23/19
22
2.8
6.5
<.005
.0078
.0850
<4.8
E
11/23/19 1
.22
5.7
6.4
<.005
.0051
.0515
<4.8
"Continued"
' Monthly sampling (instead of semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
'The total precipitation must be recorded using data from an on -site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
R See General Permit, Section B, Table 1 to identify the especially sensitive receiving water classifications where the more protective benchmark applies.
5 Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Fffluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469,12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/l/2018-05/31/2021 SWU-245, last revised 11/1/2018
Page 1 of 3

Stormwater Discharge Monitoring Report
for North Carolina Division of Energy, Mineral and Land Resources General Permit No. NCG030000
Date submitted 01/2812020
CERTIFICATE OF COVERAGE NO. NCG03 0 0 7 0
FACILITY NAME ABB Motors and Mechanical
COUNTY Buncombe
PERSON COLLECTING SAMPLES Dan March, Pisgah Envi
LABORATORY Pace Analytical Lab Cert. # 40
Comments on sample collection or analysis:
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR 2019
SAMPLE PERIOD ❑ Jan -June 0 July -Dec
or ❑ Monthly'(month)
DISCHARGING TO CLASS ❑ORW ❑HQW QTrout ❑PNA
❑Zero -flow ❑Water supply ❑SA
[]Other
PLEASE REMEMBER TO SIGN ON PAGES 2 AND/OR 3 --1
No discharge this period?2
Outfaill No.
Date Sample
Collected'
(mo/dd/yr)
24-hour rainfall
amount,
Inches;
Total Suspended Solids
pH,
Standard units
Total Copper
Total Lead
Total Zinc
Non -Polar O&G/Total
Total Petroleum
Hydrocarbons
Toxic
Organics'
Benchmarks
_
-
100 mg/L or 50 mg/O
6.0 - 9.0
0.010 mg/L
0.075 mg/L
0.126 mg/L
15 mg/L
1 mg/L
Parameter Code
-
46529
C0530
00400
01119
01051
01094
00552
78141
F
11/23/19
.22
<2.5
6.4
<.005
<.005
.0297
<4.8
G
11/23/19
.22
68.7
6.2
.0231
.0255
.383
<4.8
1
11/23/19
.22
<2.7
6.3
<.005
<.005
.0548
<4.8
"Continued"
' Monthly sampling (instead of semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at the same outfall.
'For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
'The total precipitation must be recorded using data from an on -site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
' See General Permit, Section B, Table 1 to identify the especially sensitive receiving water classifications where the more protective benchmark applies.
s Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2018-05/31/2021 SWU-245, last revised 11/1/2018
Page A of 3

Facilities that incorporate a solvent management plan into the Stormwater Pollution Prevention Plan may so certify, and the requirement for TTO monitoring
may be waived. The solvent management plan shall include a list of the total toxic organic compounds used and the other elements listed in the General
Permit. For those facilities electing to employ the TTO monitoring waiver, the discharger shall sign the following certification statement:
"Based upon my inquiry of the person or persons directly responsible for managing compliance with the permit monitoring requirement for total toxic organics
(TTO), I certify that to the best of my knowledge and belief, no dumping of concentrated toxic organics into the stormwater or areas which are exposed to rainfall or
stormwater runoff has occurred since filing the last discharge monitoring report. I further certify that this facility is implementing the all the provisions of the
solvent management plan included in the Stormwater Pollution Prevention Plan."
Dale Spivey
Name (Print name)
Plant Manager
(Print title) z
)
I-z��~Zo
Signature Date
Note: Results must be reported in numerical format. Do not report Below Detection Limit, BDL, <PQL, Non -detect, ND, or other similar non -numerical
format. When results are below the applicable limits, they must be reported in the format, "<XX mg/L", where XX is the numerical value of the detection
limit, reporting limit, etc. in mg/L.
Note: If you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Part B: Vehicle Maintenance Area Monitoring Results: only for facilities averaging > 55 gal of new oil per month.
❑ No discharge this period?z
Outfall No.
Date Sample Collected'
(mo/dd/yr)
24-hour rainfall amount,
Inches3
New Motor Oil or
Hydraulic Oil Usage
Non -Polar O&G/ Total
Petroleum Hydrocarbons
Total Suspended
Solids
Benchmarks
-
-
-
15 mg/L
100 mg/L or 50 mg/0
Parameter Code
-
46529
NCOIL
00552
C0530
Footnotes from Part A also apply to Part B
Note: If you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Permit Date: 11/1/2018-05/31/2021
SWU-245, last revised 11/1/2018
Page 2 of 3

FOR PART A AND PART B MONITORING RESULTS:
• A BENCHMARK EXCEEDANCE TRIGGERS TIER 1 REQUIREMENTS. SEE PERMIT PART II SECTION B.
• 2 EXCEEDANCES IN A ROW FOR THE SAME PARAMETER AT THE SAME OUTFALL TRIGGER TIER 2 REQUIREMENTS, SEE PERMIT PART II SECTION B.
• TIER 3: HAS YOUR FACILITY HAD 4 OR MORE BENCHMARK EXCEEDENCES FOR THE SAME PARAMETER AT ANY ONE OUTFALL? YES CJ NO ❑
IF YES, HAVE YOU CONTACTED THE DEMLR REGIONAL OFFICE? YES M NO ❑
REGIONAL OFFICE CONTACT NAME: Stanley Aiken
Mail an original copy of this DMR, includina all "No Discharae" reports, within 30 days of receipt of the lab results for at end of monitorinq period in the
case o "No Dischar e" reports) to:
Division of Water Quality
Attn: DWQ Central Files
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
YOU MUST SIGN THIS CERTIFICATION FOR ANY INFORMATION REPORTED:
"I certify, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to
assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or
those persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete.
am aware that there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations."
Signature of Permittee
Permit Date: 11/1/2018-05/31/2021
Date
SWU-245, last revised 11/1/2018
Page 3 of 3