NCGNE1335_Inspection Report_20200609

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
BRIAN WRENN
Acting Director
NORTH CAROLINA
Environmental Quality
June 9, 2020
Plasticard Locktech International
Attention: Pam Parsons
605 Sweeten Creek Industrial Park
Biltmore Forest, North Carolina 28803
Subject: No Exposure Certification
Compliance Evaluation Inspection
Plasticard Locktech International
Certification Number: NCGNE1335
Buncombe County, North Carolina
Dear Mrs. Parsons:
Enclosed please find a copy of the Compliance Evaluation Inspection Report for the
inspection I conducted at the subject facility on June 4, 2020.
The report should be self-explanatory; however, should you have any questions
concerning this report, please do not hesitate to contact me at [phone] or by email
at [e-mail].
Sincere'
Isaiah Reed, CPSW CEPSCI, M 4CECI
Environmental Specialist
Land Quality Section
Enclosure: Inspection Report
North Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
aanre cwourvnD E
Asheville Regional Office 1 2090 U.S. Highway 70 1 Swannanoa, North Carolina 28778
oewa+maa..ironmmuiau.nry 828.296.4500

Permit: NCGNE1335
SOC:
County: Buncombe
Region: Asheville
Compliance Inspection Report
Effective: 06/10/19 Expiration:
Effective: Expiration:
Contact Person: Pam Parsons
Title:
Owner : Plasticard Locktech International
Facility: Plasticard Locktech International
605 Sweeten Creek Industrial Park
Biltmore Frst NC 28803
Phone:[phone]
Directions to Facility:
Facility is located in the rear of the Sweeten Creek Industrial Park at the intersection of Sweeten Creek Road & Sweeten Creek
Industrial Park Road.
System Classifications:
Primary ORC: Certification: Phone:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 06/04/2020 Entry Time 09:30AM Exit Time: 10:45AM
Primary Inspector: Isaiah L Reed Phone: [phone]
Secondary Inspector(s):
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Stormwater Discharge, No Exposure Certificate
Facility Status: 0 Compliant ❑ Not Compliant
Question Areas:
N Miscellaneous Questions Misc
(See attachment summary)
Page 1 of 3

Permit: NCGNE1335 Owner -Facility: Plasticard Locktech International
Inspection Date: 06/04/2020 Inspection Type : Compliance Evaluation Reason for Malt: Routine
Inspection Summary:
On June 4, 2020 this facility was inspected for compliance. I met with Troy Dowers on site. No issues were noted during the
inspection, and the annual self -recertification was emailed to me after the inspection. If you have any questions, please
contact this office at [phone].
Page 2 of 3

Permit: NCGNE1335 Owner -Facility: Plasticard Locktech International
Inspection Date: 06104/2020 Inspection Type : Compliance Evaluation Reason for Visit: Routine
MISC Yes No NA NE
Is the facility compliant? 0 11 El El
Comment:
Page 3 of 3