WI0800536_Permit (Issuance)_20200416

UNITED STATES MARINE CORPS
MARINE CORPS INSTALLATIONS EAST —MARINE CORPS BASE
PSC BOX 20005
CAMP LEJEUNE NC 28542-0005
5090.10.1
G-F/BEMD
07- Apr - 2020
UIC Program
North Carolina Department of
Environmental Quality
Division of Water Resources
1636 Mail Service Center
Raleigh, North Carolina 27699-1636
To Whom It May Concern:
Marine Corps Base Camp Lejeune respectfully submits the
enclosed permit application for approval to conduct a small
scale injection operation at petroleum remediation site
Gottschalk Marina 31/S-715 (NCDEQ DWM Incident #32309). The
proposed injection event is being completed to help address low
level dissolved phase 2L groundwater quality exceedances at the
site. No new wells will be installed. One event is proposed
and will be conducted upon approval of the application. The
proposed injection event will be followed up with an
electronically submitted Injection Event Record.
If you have any questions or comments, please contact Mr.
Thomas Richard, Environmental Quality Branch, Environmental
Management Division, G-F, at [phone]. Please reference
document number 25499 in your reply.
Sincerely,
TOONSON. J OHN.
R 1228623730
Di gi t al I y signed by
TCUWSCN. J Ca N. R 122862373
0
Dat e: 2020. 04. 07
13: 30: 04 - 04' 00'
JOHN R. TOWNSON
Director, Environmental Management
By direction of
the Commanding General
Enclosure: Gottschalk Marina Notification of Intent (NOI) to
Construct or Operate Injection Wells Application
Copy to:
File (ODI 25499)

NORTH CAROLINA DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES
NOTIFICATION OF INTENT TO CONSTRUCT OR OPERATE INJECTION WELLS
The following are `permitted by rule" and do not require an individual permit when constructed in accordance
with the rules of 15A NCAC 02C .0200. This form shall be submitted at least 2 weeks prior to infection.
AQUIFER TEST WELLS (15A NCAC 02C .0220)
These wells are used to inject uncontaminated fluid into an aquifer to determine aquifer hydraulic characteristics.
IN SITU REMEDIATION (15A NCAC 02C .02251 or TRACER WELLS (15A NCAC 02C .02291:
1) Passive Injection Systems - In -well delivery systems to diffuse injectants into the subsurface. Examples include
ORC socks, iSOC systems, and other gas infusion methods.
2) Small -Scale Injection Operations — Injection wells located within a land surface area not to exceed 10,000
square feet for the purpose of soil or groundwater remediation or tracer tests. An individual permit shall be required
for test or treatment areas exceeding 10,000 square feet.
3) Pilot Tests - Preliminary studies conducted for the purpose of evaluating the technical feasibility of a
remediation strategy in order to develop a full scale remediation plan for future implementation, and where the
surface area of the injection zone wells are located within an area that does not exceed five percent of the land
surface above the known extent of groundwater contamination. An individual permit shall be required to conduct
more than one pilot test on any separate groundwater contaminant plume.
4) Air Injection Wells - Used to inject ambient air to enhance in -situ treatment of soil or groundwater.
Print Clearly or Type Information. Illegible Submittals Will Be Returned As Incomplete.
DATE: March 25, 2020 PERMIT NO. W 10800536 (to be filled in by DWR)
A. WELL TYPE TO BE CONSTRUCTED OR OPERATED
(1) Air Injection Well......................................Complete sections B-F, K, N
(2) Aquifer Test Well.......................................Complete sections B-F, K, N
(3) Passive Injection System...............................Complete sections B-F, H-N
(4) X Small -Scale Injection Operation ......................Complete sections B-N
(5) Pilot Test.................................................Complete sections B-N
(6) Tracer Injection Well...................................Complete sections B-N
B. STATUS OF WELL OWNER: Federal Government
C. WELL OWNER — State name of entity and name of person delegated authority to sign on behalf of the
business or agency:
Name: MCB Camp Lejeune, Environmental Management Division, Attn: Thomas Richard
Mailing Address: 12
City: MCB Camp Lejeune State: NC_ Zip Code: 28542 County: Onslow
Day Tele No.: [phone]
Cell No.:
EMAIL Address: thomas.richard(a-)usmc.mil Fax No.:
UIC/In Situ Remed. Notification (Revised 3/2/2015) Page 1

D. PROPERTY OWNER (if different than well owner)
E.
F.
In
H.
Name: Same as above
Mailing Address:
City:
Day Tele No.: _
EMAIL Address:
State: Zip Code:
Cell No.:
Fax No.:
County:
PROJECT CONTACT - Person who can answer technical questions about the proposed injection project.
Name: Ben Grosser. Rhea Eneineers and Consultants. Inc.
Mailing Address: 400 Carl Street Ste 202
City: Wilmington State: NC_ Zip Code:28403 County: New Hannover
Day Tele No.: 910-350-3156 Cell No.: 910-650-9677
EMAIL Address: ben. rog ssergrhea.us Fax No.:
PHYSICAL LOCATION OF WELL SITE
(1) Physical Address: Gottschalk Marina, Incident # 32309
County: Onslow
City: MCB Camp Lejeune State: NC Zip Code: 28542
(2) Geographic Coordinates: Latitude": 340 40' 35.53" or 340.676604576,
Longitude": 770 21' 43.59" or 770.361974959
Reference Datum:
Method of Collection: GPS
Accuracy:
"FOR AIR INJECTION AND AQUIFER TEST WELLS ONLY: A FACILITY SITE MAP WITH PROPERTY
BOUNDARIES MAY BE SUBMITTED IN LIEU OF GEOGRAPHIC COORDINATES.
TREATMENT AREA
Land surface area of contaminant plume: 900 square feet
Land surface area of inj. well network: see below (< 10,000 ft2 for small-scale injections)
Percent of contaminant plume area to be treated: 100% (must be < 5% of plume for pilot test injections)
INJECTION ZONE MAPS — Attach the following to the notification.
(1) Contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the
contaminant plume in soil and groundwater, existing and proposed monitoring wells, and existing and
proposed injection wells; and
(2) Cross-section(s) to the known or projected depth of contamination that show the horizontal and
vertical extent of the contaminant plume in soil and groundwater, changes in lithology, existing and
proposed monitoring wells, and existing and proposed injection wells.
(3) Potentiometric surface map(s) indicating the rate and direction of groundwater movement, plus
existing and proposed wells.
UIC/In Situ Remed. Notification (Revised 3/2/2015) Page 2

I. DESCRIPTION OF PROPOSED INJECTION ACTIVITIES — Provide a brief narrative regarding the
purpose, scope, and goals of the proposed injection activity. This should include the rate, volume, and
duration of injection over time.
Wells UST31-MWO1, UST31-MW02, UST31-MW05, AS-6, and AS-10 will receive a total of 1,000 pounds
of CBN mixed with 1,000 gallons of water and 30 gallons of Petrobac. Each individual well will receive 165
pounds of CBN, 5 pounds of Petrobac, and approximately 165 gallons of water. The injection rate is no more
than 3 gallons minute.
J. INJECTANTS — Provide a MSDS and the following for each injectant. Attach additional sheets if necessary.
NOTE: Approved injectants (tracers and remediation additives) can be found online at
http://portal.ncdenr.org/web/wd/aps/�. All other substances must be reviewed by the Division of Public
Health, Department of Health and Human Services. Contact the UIC Program for more info (919-807-6496).
Injectant: CBN
Volume of injectant: 1,000 pounds
Concentration at point of injection: approximately 5%
Percent if in a mixture with other injectants:
Injectant: Petrobac
Volume of injectant: 30 gallons
Concentration at point of injection: approximately 5%
Percent if in a mixture with other injectants:
K. WELL CONSTRUCTION DATA
(1) Number of injection wells: 5 Proposed 3 monitoring/2parge
(2) Provide well construction details for each injection well in a diagram or table format. A single
diagram or line in a table can be used for multiple wells with the same construction details. Well
construction details shall include the following:
(a) well type as permanent, direct -push, or subsurface distribution system (infiltration gallery)
(b) depth below land surface of grout, screen, and casing intervals
(c) well contractor name and certification number
UIC/In Situ Remed. Notification (Revised 3/2/2015) Page 3

L. SCHEDULES — Briefly describe the schedule for well construction and injection activities.
No new wells will be installed for this event. Upon approval, the injection event will take approximately one
week to complete and will be recorded in the injection event record.
M. MONITORING PLAN — Describe below or in separate attachment a monitoring plan to be used to determine
if violations of groundwater quality standards specified in Subchapter 02L result from the injection activity.
Groundwater sampling at the proposed 3 monitoring wells for VOCs using United States Environmental
Protection Agency (USEPA) Method 6200, 625, MADEP, and EPH/VPH is scheduled to occur in Jules
and January 2021 to track performance.
N. SIGNATURE OF APPLICANT AND PROPERTY OWNER
APPLICANT: "I hereby certify, under penalty of law, that I am familiar with the information submitted in
this document and all attachments thereto and that, based on my inquiry of those individuals immediately
responsible for obtaining said information, I believe that the information is true, accurate and complete. I am
aware that there are significant penalties, including the possibility of fines and imprisonment, for submitting
false information. I agree to construct, operate, maintain, repair, and if applicable, abandon the injection well
and all related appurtenances in accordance with the 15A NCAC 02C 0200 Rules. "
TOWNSON.JOHN.R.122 Digitally signed by JOHN R. TOWNSON
TO W N S O N. J O H N. R.1228623730
8623730 Date: 2020.04.07 11:33:26-04'00' DIRECTOR, EMD
Signature of Applicant Print or Type Full Name
PROPERTY OWNER (if the property is not owned by the permit applicant):
"As owner of the property on which the injection well(s) are to be constructed and operated, I hereby consent
to allow the applicant to construct each injection well as outlined in this application and agree that it shall be
the responsibility of the applicant to ensure that the injection wells) conform to the Well Construction
Standards (15A NCAC 02C .0200). "
"Owner" means any person who holds the fee or other property rights in the well being constructed. A
well is real property and its construction on land shall be deemed to vest ownership in the land owner, in
the absence of contrary agreement in writing.
Signature* of Property Owner (if different from applicant) Print or Type Full Name
* An access agreement between the applicant and property owner may be submitted in lieu of a signature on this form.
Submit the completed notification package to:
DWR — UIC Program
1636 Mail Service Center
Raleigh, NC 27699-1636
Telephone: [phone]
UIC/In Situ Remed. Notification (Revised 3/2/2015) Page 4

Figures

0
GOTTSCHALK MARINA
o O
P�' 00 SF,Qo O
0 0�00
00 00
0
0
0 0
o
0 0
ao a
LEGEND
Water
Road
Athletic Field
Recreation Trail
Existing Building
Demolished Building
o,
01
A
PROJECT: GOTTSCHALK MARINA FIGURE 1
2019 AMR
DAVENPORT MARINE CORPS BASE TITLE:
R H E A/\ CAMP LEJEUNE, NORTH CAROLINA SITE VICINITY AND RECEPTORS
500 250 0 500
Feet Project No.: Date:
SCALE 180815 NOV 2019
Data Sources: GIS data layers provided by the MCB Camp Lejeune GIS Department and ESRI and/or DAVENPORT -RHEA JV, LLC.

Soil Boring Logs and Monitoring Well
Completion Records

WELL
LOG
CATLM
Engineers and Scientists
minpl
VMmlVon, NC
MSHEET 1 OF 1
PROJECT NO.: 210094.02
STATE: NC
I COUNTY: Onslow
LOCATION: MCB Camp Lejeune
PROJECT NAME: 31/S-715 Gottschalk Marina
LOGGED BY: Shane Chasteen
WELL ID:
DRILLER: John E. Wood III
UST31-MW01
NORTHING: 3839728.4
1 EASTING: 283588.1
CREW: Roger Caulder
SYSTEM: UTM NAD83 m
BORING LOCATION: Asphalt - 20ft S. of S195
T.O.C. ELEV.: 6.05
DRILL MACHINE: CME 45B ATV
METHOD: HSA
0 HOUR DTW:
TOTAL DEPTH: 12.0
START DATE: 10/21 /10
FINISH DATE:
10/21 /10
124 HOUR DTW: 4.9
WELL DEPTH: 12.0
DEPTH
BLOW COUNT
OVA
LAB
M
o
SOIL AND ROCK
WELL
sin sin sin sin
(ppm)
s
G
DEPTH DESCRIPTION ELEVATION
DETAIL
0.0 LAND SURFACE 6.2
0.0
a
— 0.6
N
1.2
2.0 N
3.0
3.0 3.2
1
1
2
1
341
1M/V1/ ;
(SC/CL) - Orange to tan, Silty, v.f. to f. Clayey
.
SAND to Sandy CLAY. Low plast. Mod. HCO.
5.0 1.2
o�
0
6
fA
fV N
8.0
8.0 1.8
1
12
4
6
152.3
/Sat'
(SM) - Brown, Silty, v.f. SAND. Slight HCO.
10.0 -3.8
11.5
12.0
12-0
Boring Terminated at Elevation -5.8 ft
Ej Portland Cement IN Bentonite Pellets El#2 Medium Sand

NONRESIDENTIAL WELL CONs'rRUCTION RECORD
North Carolina Department of latvironinciit and Natural Resources - Division of Water (?tality
WELL CONTRACTOR CERTIFICATION #: 2799
1. WELL CONTRACTOR:
John E. Wood, III
Well Contractor (Individual) Name
CATLIN Engineers and Scientists
Well Contractor Company Name
220 Old Dairy Road
Street Address
Wilmington North Carolina 28405
City or rown State Lip Code
(910) - 452-5861
;lea code - Phone number
2. WELL INFORMATION
WELL CONSTRUCTION PERMIT #: N/A
OTHER ASSOCIATED PERMIT # (if applicable): N/A
SITE WELL ID # (if applicable) UST3 1 -MWO
3. WELL USE (Check One Box): Monitoring ® Municipal/Public ❑
Industnal/Commercial ❑ Agricultural ❑ Recovery ❑ Injection ❑
Irrigation ❑ Other ❑ (list use):
DATE DRILLED: October 21, 2010
4. WELL LOCATION:
Julian C. Smith Road, 28542
(Street ame Numbers, Community, Subdivision, Lot d., arcs , ip o e
CITY: MCB, Camp Leieune COUNTY: Onslow
TOPOGRAPHIC / LAND SETTING (check appropriate box)
®Slope ❑Valley ❑Flat ❑Ridge ❑Other:
LATITUDE: 34.6766839 DD
LONGITUDE: 77.3621024 DD
Latitude/longitude source: ® GPS ❑ Topo. map
(Location of well must be shown on a USGS topo map and
attached to this form if not using a GPS.)
5. FACILITY (Name of the business where the well Is located.)
N/A N/A
Facility Name Facility ID # (if applicable)
Julian C. Smith Road
Street Address
MCB, Camp Lejeune NC 28542
City or Town State Zip Code
Mr. Nick Schultz
Contact Name
Attn: I&E/ EMD/ EQB/ PSC Box 20004
Mailing Address
Camp Lejeune NC 28542-0004
City or Town State Zip Code
Lail]
)- 451-5068
Area code - Phone number
6. WELL DETAILS:
a. TOTAL DEPTH: 12
b. DOES WELL REPLACE EXISTING WELL? YES ❑ NO
C. WATER LEVEL Below Top of Casing: 4.9 FT
(Use "+” if Above Top of Casing
d. TOP OF CASING Is -0.16 FT. Above Land Surface'
top of casing terminated auor below land surface may require
A variance in accordance with 15A NCAC 2C.0118,
o. YIELD (gpm): NIA METHOD OF TEST: NIA
f. DISINFECTION: Type NIA Amount: NIA
g. WATER ZONES (depth):
Top
Bottom
Top Bottom
Top
Bottom
Top Bottom
Top
Bottom
top Bottom
7. CASING:
Thickness/
Depth
Diameter Weight Material
Top 0.16
Bottom
2
Ft.
2 in. Sch.40 PVC
Top
Bottom
Ft.
in.
Top
Bottom
Ft.
in.
8. GROUT:
Depth
Material Method
Top 0.3
Bottom
0.6
Ft. Portland Cement Surface Pour
Top 0.6
Bottom
1.2
Ft.
Bent. Pellets Surface Pour
Top
Bottom
Ft.
9. SCREEN:
Depth
Diameter
Slot Size Material
Top 2
Bottom
11.5
Ft.
2 in. Slot .010 in. PVC
Top
Bottom
Ft.
in. in.
Top
Bottom
Ft.
in. in.
: 10. SAND/GRAVEL PACK:
Depth
Size Material
Top 1.2
Bottom
12
Ft.
#2 Medium Torpedo Sand
Top
Bottom
Ft.
Top
Bottom
Ft.
11. DRILLING LOG
Top Bottom Formation Description
SEE
/ =ATTACHED
/
/
/
12. REMARKS:
Permanent Flush Type II
I DO HEREBY CERTIFY THAT THIS WELL WAS CONSTRUCTED IN ACCORDANCE WITH
15A NCAC 2C, WELL CONSTRUCTION STANDARDS, AND THAT A COPY OF THIS
RECORD HAS BEEN PROVIDED TO THE WELL OWNER.
()o-L ucx
Vh
NATURE OF CERTIFIED WELL CONTRACTOR DATE
n E. Wood, III
PRINTED NAME OF PERSON CONSTRUCTING THE WELL
Submit within 30 days of completion to: Division of Water Quality - Information Processing, Modified from
1617 Mall Service Center, Raleigh, NC 27699-1617, Phone No. [phone] Form GWA b
Rev. 2/09

WELL
LOG
CATLM
Engineers and Scientists
WIImlrpt
Mm fttnn, NC SHEET 1 OF 1
PROJECT NO.: 210094.02
STATE: NC
I COUNTY: Onslow
LOCATION: MCB Camp Lejeune
PROJECT NAME: 31/S-715 Gottschalk Marina
LOGGED BY: Shane Chasteen
WELL ID:
DRILLER: John E. Wood III
UST31-MW02
NORTHING: 3839718.7
FASTING: 283587.6
CREW: Roger Caulder
SYSTEM: UTM NAD83 m
BORING LOCATION: Asphalt - Edge of steep hill
T.O.C. ELEV.: 7.60
DRILL MACHINE: CME 45B ATV
METHOD: HSA
0 HOUR DTW:
TOTAL DEPTH: 12.0
START DATE: 10/21 /10
FINISH DATE:
10/21 /10
124 HOUR DTW: 5.3
WELL DEPTH: 12.0
DEPTH
BLOW COUNT
OVA
LAB
M
o
SOIL AND ROCK
WELL
sin sin sin sin
(PPM)
s
G
DEPTH DESCRIPTION ELEVATION
DETAIL
0.0 LAND SURFACE 7.8
0.0
a
= 0.6
y
1.2
2.0 N
3.0
3.0 4.8
2
1
1
2
607.1
M
(SC) - Orange to tan, Silty, v.f. SAND w/some
clay. Strong HCO.
5.0 2.8
o�
o a.
o�
z
fV y
8.0
8.0 -0.2
2
2
1
1
40.8
�/R
(SC) - Brown, Silty CLAY. Low to med. plast.
F//"
Slight HCO.
10.0 -2.2
11.s
12.012-0
Boring Terminated at Elevation -4.2 ft
EjPortland Cement IN Bentonite Pellets 0#2 Medium Sand

NONRESIDENTIAL WELL CONSTRUCTION RE CORD
f 4 , Not th Carolina Department of Environment and Natural Resources - Division of Water Otiality
M
�r WELL CONTRACTOR CER'FIFICA'FION 1#: 2799
1. WELL CONTRACTOR:
John E. Wood, III
Well Contractor (Individual) Name
CATLIN Engineers and Scientists
Well Contractor Company Name
220 Old Dairy Road
Street Address
Wilmington North Carolina 28405
City or rown State Lip Code
(910) - 452-5861
Aiea code - phone number
2. WELL INFORMATION
WELL CONSTRUCTION PERMIT #: N/A
OTHER ASSOCIATED PERMIT # (if applicable): N/A
SITE WELL ID # (if applicable) U ST3 1 -MWO2
3. WELL USE (Check One Box): Monitoring ® Municipal/Public ❑
Industrial/Commercial ❑ Agricultural ❑ Recovery ❑ Injection ❑
Irrigation ❑ Other ❑ (list use):
DATE DRILLED: October 21, 2010
4. WELL LOCATION:
Julian C. Smith Road, 28542
(Street Name, Numbers, Community. Subdivision, Lot No., Parcel, Zip Code)
CITY: MCB, Camp Lejeune COUNTY: Onslow
TOPOGRAPHIC / LAND SETTING (check appropriate box)
IOSlope ❑Valley []Flat ❑Ridge []Other:
LATITUDE: 34.6765969 DD
LONGITUDE: 77.3621052 DD
Latitude/longitude source: ® GPS ❑ Topo. map
(Location of welt must be shown on a USGS topo map and
attached to this form if not using a GPS.)
5. FACILITY (Name of the business where the well is located.)
N/A N/A
Facility Name
Facility ID # (if applicable)
Julian C. Smith Road
Street Address
MCB, Camp Lejeune
NC
28542
City or Town
State
Zip Code
Mr. Nick Schultz
Contact Name
Attn: I&E/ EMD/ EQB/ PSC Box 20004
Mailing Address
Camp Lejeune
NC
28542-0004
City or Town
State
Zip Code
9( 10)- 451-5068
Area code - Phone number
6. WELL DETAILS:
a. TOTAL DEPTH: 12
b. DOES WELL REPLACE EXISTING WELL? YES ❑ NO
C. WATER LEVEL Below Top of Casing- 5.28 FT.
(Use "+" if Above Top of Casing
d. TOP OF CASING 13 -0.16 FT. Above Land Surface"
rop of casing terminated aller below land surface may require
a variance In accordance with 15A NCAC 2C.0118.
o. YIELD (gpm): N� METHOD OF TEST: NM
f. DISINFECTION: Type NIA Amount: NIA
g. WATER ZONES (depth):
Top Bottom Top Bottom
Top Bottom "Top Bottom
Top Bottom Top Bottom
7. CASING:
Depth
Diameter eighThickness/
Material
Top 0.16
Bottom
2
Ft.
2 in. Sch.40 PVC
Top
Bottom
Ft.
in.
Top
Bottom
Ft.
in.
8. GROUT:
Depth
Material Method
Top 0.3
Bottom
0.6
Ft.Portland Cement Surface Pour
Top 0.6
Bottom
1.2
Ft.
Bent. Pellets Surface Pour
Top
Bottom
Ft.
9. SCREEN:
Depth
Diameter
Slot Size Material
Top 2
Bottom
11.5
Ft.
2 in. Slot .010 jn. PVC
Top
Bottom
Ft.
in. in.
Top
Bottom
Ft.
in. in.
10. SAND/GRAVEL PACK:
Depth
Size Material
Top 1.2
Bottom
12
Ft.
#2 Medium Torpedo Sand
Top
Bottom
Ft.
Top
Bottom
Ft.
11. DRILLING LOG
Top Bottom
/
Formation Description
SEE
ATTACHED
12. REMARKS:
Permanent Flush Type II
I DO HEREBY CERTIFY THAT THIS WELL WAS CONSTRUCTED IN ACCORDANCE WITH
15A NCAC 2C, WELL CONSTRUCTION STANDARDS, AND THAT A COPY OF THIS
RECORD HAS BEEN PROVIDED TO THE WELL OWNER.
,)if
't"--- G)61) 9 r 1-'92- ru
S� ATURE OF CERTIFIED WELL CONTRACTOR DATE
J6hn E. Wood, III
PRINTED NAME OF PERSON CONSTRUCTING THE WELL
Submit within 30 days of completion to: Division of Water Quality - Information Processing, Modified from
1617 Mall Service Center, Raleigh, NC 27699-1617, Phone No. [phone] Form GW-1 b
Rev. 2/09

Site Cross -Sections

UST Site 31/S-715 — Existing Site Conditions
— Cross Section Locations
WA CE ME"
r
We7D
AS�NYlN,6C�
U6,71Gh IMUM8.
V#AWII&GM I
1184MWMM
,lST72�M6NA88®
UST72MGM- W010
UST7260M-0VW18
6WINI 79Y01
�y
UL3I-MW04
Uaf31
Fomur Fuel Trawler
UIre La;eUon
usnsaoM-GWM®
Former UST location
■
713
_UsTme"YMM
BLEGEND
.Rww.oMamrowr [Mw2w— .
v F—�m,�
©e.,�..
MhOe
_B'OiM..e�i.
® To.4
s ,w.m
ELkv—
60 16
0 30 Feel
•
aSG1LE
WA
• The cross section locations are approximate based on the 2010 RFI submitted by CH2MHill.

UST Site 31/S-715 — Existing Site Conditions
— Cross Section Location A -A'
A
West
5
5
=5
2s
35-
-45-
7n
q-7•_1•t -
A'
4-
Estimated extent of
groundwater contamination
above 2B SWQS
1-7
0 20 40 60 60 100 120 140
The cross section location Figure was prepared by CH2MHill for the 2010 RFI.
Red shading is CATLIN's interpretation.
East
.5
,5
15
25
•-35
• -45
Horizo 1 -20'
V rfu 1 -1
LEGEND
�YSendLSSIl
lean Cley(gl
® Fd CbYAX
Fbe SentlaM
Well OaCH samLgm
Y MM sa ma
1 soll006V
Wellsaw
Nferyra etl Geolape CmCetA
— — Mm"rmwgccmrma
Waler lewl
„fag,
NO*
1) i,re tlapth ad r: W" dMa tsufne
SbataIrmmetlanM&Ocean(P1 ,Were
galeraMeahmatlIrtrpda dMhwn
led ba[bm. WMINbn an aural
UWUfam cwditm app0ee or* to the
epedOc MCOW a kwWatl. Srmeuboe
amtlisna ataw brtlbes may Merfmm
oad®One Owr" atlhe IMIkO tlbutlau

UST Site 31/S-715 — Existing Site Conditions
— Cross Section Location B-B"
Estimation of monitoring Sow, :1' • m
well locations *•m
N ..
3 m LEGEND
1s ,s
Fa MY6a1
waft" O&A'j V.
$ - .� (1�_ \'r1�� �•� . try .� l=~ 1• `.,M1 .�. r r �. � ..,. -- .i Sa14
1�'8.l r � pit ii by S,•(i �! :r•t•.?'—� '�� �. � f�YH L�'il
X -5 ; ..... •.� � i . -b �. Sol8uh9
. - T•1 � Wel Saeai
� t - htrpded Geo60nCad*,
i frilrlead
_tb -Is i�a.a tWl'09J
pc
$ M . • - 4 Estimated extent of
groundwater contamination �n°'�dlwaEarpm
.. �. g ,.mtnf�emw>,�a�opo...
ma above 2B SWQS'°d6iYe°'
-2546 Y4wbamdfasa{FReaiybM
�peafo6a6orsndc b&SWRrbe
-dre ddcA.* 1-WdMffan
a�d9Muans' V(h Ydtdedta &m
1JSWAMIb?W MSVOUMbIW M
Rldo➢b dea4(aa nlinlea f ap-051
0 .D 40 80 80 1C0 120 ,40
-35 .35
The cross section location Figure was prepared by CH2MHill for the 2010 RFI.
Red shading is CATLIN's interpretation. 18

Safety Data Sheets

LLC
Environmental Terhnningies
w"m.e01r.rnm
Safety Data Sheet
Section 1: Product and Company Identification
Product Name:
MSDS Number:
Chemical Name:
Chemical Family:
Recommended Use
Restrictions on Use
EZT-A2
010
Not Applicable — Biological Material
Not Applicable — Biological Material
Petroleum Hydrocarbon Degradation
No Data
Company: ETEC, LLC
3830 S Truman Rd. Bldg. 12
Washougal, WA 98671
USA
Telephone: [phone]
Emergency Telephone: [phone]
Medical Emergencies: [phone]
U.S. Coast Guard National
Response Center: [phone]
3830 S Truman Rd. Bldg. 12
Washougal, WA 98671
[phone] Fax
www.etecllc.com
Revision Date: 05/19/2015
Section 2: GHS Hazards Identification
This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200)
Label Elements: Not a hazardous substance or mixture.
Hazards not otherwise classified (HNOC) or not covered by GHS - none
Section 3: Composition/Information on Ingredients
No ingredients are hazardous according to OSHA criteria.
No components need to be disclosed according to the applicable regulations.
Section 4: First Aid Measures
Description of first aid measures:
Revision Date: 05/19/2015 Page 1 of 6

Safety Data Sheet
EZT-A2
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, give artificial respiration. Call a poison center or doctor/physician if victim feels
unwell.
Skin Contact: Wash skin with plenty of water.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: See sections 2 and/or 11.
Indication of any immediate medical attention and special treatment needed: No data available.
Section 5: Fire Fighting Measures
Suitable Extinguishing Media: Use extinguishing medium suitable for surrounding material.
Unsuitable Extinguishing Media: No known information.
Specific Hazards Arising from the chemical/substance: None known.
Hazardous Combustion Products: None known.
Protective Equipment and Precautions for Fire -Fighters: As in any fire, wear self-contained breathing
apparatus and full protective gear.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Ensure adequate
ventilation. Use personal protective equipment. Avoid dust formation. Do not breathe
dust/fume/gas/m ist/va pors/s pray.
Environmental Precautions: Do not flush into surface water. See section 12 for further environmental
data.
Methods for Containment/Cleaning Up: Contain spillage and collect with non-combustible absorbent
material. Pick up and transfer to properly labeled containers. Ventilate area and wash spill site after
material pickup is complete.
Section 7: Handling and Storage
Precautions for Safe Handling: Do not breathe vapors/dust. Handle in accordance with good industrial
hygiene and safety practice. Use only outdoors or in a well -ventilated area. Wash thoroughly after
handling. Keep out of reach of children.
Conditions for safe storage, including any incompatibilities:
Storage: Keep containers tightly closed in a dry, cool and well -ventilated place. Store at
temperatures not exceeding 70°F (20°C).
Revision Date: 05/19/2015 Page 2 of 6

Safety Data Sheet
EZT-A2
Section 8: Exposure Controls/Personal Protection
Exposure Limits: There are no OSHA PEL's, NIOSH REL's, or ACGIH TLV's applicable to this material.
Engineering Controls: Ensure adequate ventilation, especially in confined areas. Ensure that eyewash
stations and safety showers are close to the workstation location.
Personal Protective Equipment:
Eye Protection: Wear appropriate eye protection/face protection.
Hand Protection: Wear appropriate protective gloves.
Skin and Body Protection: Wear appropriate protective clothing to prevent skin exposure.
Take off contaminated clothing and wash before reuse.
Respiratory Protection: Use only in a well -ventilated area. Avoid breathing dust. Wear
appropriate NIOSH approved respirator if exposure limits are exceeded or irritation occurs.
Hygiene Measures: Wash thoroughly after handling. Handle in accordance with good industrial hygiene
and safety practice.
Section 9: Physical and Chemical Properties
Appearance/Physical State:
Color:
Odor:
Odor Threshold:
pH:
Melting/Freezing Point:
Initial Boiling Point:
Flash Point:
Evaporation Rate:
Flammability (solid, gas):
Lower Explosive Limit:
Upper Explosive Limit:
Vapor Pressure:
Vapor Density:
Relative Density:
Solubility:
Partition Coefficient:
Autoignition Temperature:
Decomposition Temperature:
Liquid
Brown/Tan
Slightly Sour Odor
Not Available
Not Available
Not Available
212°F (100°C)
Not Available
1.00
Not Applicable
Not Available
Not Available
18 mm Hg at 75°F (24°C)
Not Available
1.00
Completely soluble in water
Not Available
Not Available
Not Available
Section 10: Stability and Reactivity
Reactivity: No information available.
Stability: Stable under ordinary conditions of use and storage.
Conditions to Avoid: None identified.
Revision Date: 05/19/2015 Page 3 of 6

Safety Data Sheet
EZT-A2
Incompatible Materials: None identified.
Hazardous Decomposition Products: Other decomposition products — No data available. In
case of fire: see section 5.
Hazardous Polymerization: Will Not Occur
Section 11: Toxicological Information
Information on Likely Routes of Exposure:
Inhalation:
Ingestion:
Skin Contact
Eye Contact:
Toxicity Data:
No information available.
No information available.
No information available.
No information available.
Chemical Name
LD50 ORAL
LD50 DERMAL
LC50 INHALATION
Non -hazardous
component
No data
:j
No data
No data
Symptoms: No information available.
Delayed and Immediate Effects, Chronic Effects from Short and Long Term Exposure:
Sensitization:
Mutagenic Effects:
Reproductive Toxicity:
STOT — Single Exposure:
STOT — Repeated Exposure:
Aspiration Hazard:
Chronic Exposure:
Aggravation of Pre-existing Conditions:
Carcinogenicity:
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
Component
CAS
NTP
IARC
OSHA
Non -hazardous
component
N/A
Not listed
Not listed
Not listed
Additional Information: To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Section 12: Ecological Information
Ecotoxicity:
This product is safe for the environment at the concentrations predicted under normal use conditions.
Persistence and Degradability: No information available.
Revision Date: 05/19/2015 Page 4 of 6

Safety Data Sheet EZT-A2
Bioaccumulative Potential: No information available.
Mobility in Soil: No information available.
Other Adverse Effects: No information available.
Section 13: Disposal Considerations
Dispose of contents/container in accordance with all applicable local, state and federal regulations.
Section 14: Transport Information
For Transportation Emergencies Involving This Material, Call:
ChemTrec 1-800-424-9300 Company Code: E419
DOT (LAND):
Section 15: Regulatory Information
Not regulated
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III,
Section 302.
SARA 311/312 Hazard Categories:
Acute Health Hazard No
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard No
SARA 313: This material does not contain any chemical components with known CAS numbers that
exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
State Riaht-to-Know:
Component
Massachusetts
New Jersey
Pennsylvania
Illinois
Rhode Island
Non-
-
-
-
-
-
hazardous
Component
TSCA: Not Applicable
California Prop. 65 Components: This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm.
Section 16: Other Information
NFPA Rating:
Revision Date: 05/19/2015 Page 5 of 6

Safety Data Sheet
EZT-A2
Health Hazard: 1
Fire: 0
Reactivity Hazard: 0
Legend:
ACGIH: American Conference of Governmental & Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSL/NDSL: Domestic Substances List/Non-Domestic Substances List
IARC: International Agency for the Research of Cancer
IATA: International Air Traffic Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organizations
NFPA: National Fire Protection Association Health, Flammability & Reactivity; Hazard Scale 0
=minimal/none 4= significant
NTP: National Toxicology Program
OSHA: Occupational Safety & Health Administration
PEL: Permissible Exposure Limits
RCRA: Resource Conservation & Recovery Act
RQ: Reportable Quantity
RTK: Right -To -Know
SARA: Superfund Amendments & Reauthorization Act
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
TCLP: Toxicity Characteristic Leaching Procedure
VOC: Volatile Organic Compounds
Disclaimer: The information contained in this SDS is presented in good faith and believed to be accurate
based on the information provided. The SDS does not purport to be all inclusive, and shall be used only
as a guide. While ETEC, LLC believes that the data contained herein comply with 29 CFR 1910.1200,
they are not to be taken as a warranty or representation for which ETEC, LLC assumes legal
responsibility. ETEC, LLC shall not be held liable or accountable for any loss or damage associated with
the use of this material and information. The recommended industrial hygiene and safe use, handling,
storage, and disposal procedures are believed to be generally applicable. However, since the use,
handling, storage, and disposal are beyond ETEC, LLC control, it is the responsibility of the user both to
determine safe conditions for use of this product and to assume liability of loss, damage, or expense
arising out of the material's improper use.
Revision Date: 05/19/2015 Page 6 of 6

t eC
C
r�
Environmental Tethnningies
www.eie01r.cnm
Safety Data Sheet
Section 1: Product and Company Identification
Product Name:
MSDS Number:
Chemical Name:
Chemical Family:
Recommended Use
Restrictions on Use
CBNTM Custom -Blend Nutrients
014
Inorganic Nutrient Mixture
Mixed Nutrient
Microbial Nutrient
No Data
Company: ETEC, LLC
3830 S. Truman St., Bldg. 12
Washougal, WA 98671
USA
Telephone: [phone]
Emergency Telephone: [phone]
Medical Emergencies: [phone]
U.S. Coast Guard National
Response Center: [phone]
Section 2: GHS Hazards Identification
3830 S. Truman St., Bldg 12
Washougal, WA 98671
[phone] Fax
www.etecllc.com
Revision Date: 05/12/2015
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200)
Oxidizing solids
Category 3
Skin irritation
Category 2
Eye irritation
Category 2
Specific Target Organ Toxicity - single exposure (Respiratory system)
Category 3
Label Elements:
Signal Word: Warning
Revision Date: 05/12/2015 Page 1 of 8

Safety Data Sheet
CBNTM Custom -Blend Nutrients
Hazard Statements:
May intensify fire; oxidizer
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
Precautionary Statements:
Keep away from heat.
Keep/Store away from clothing/ other combustible materials.
Take any precaution to avoid mixing with combustibles.
Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
Wash skin thoroughly after handling.
Use only outdoors or in a well -ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of soap and water.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Call a POISON CENTER or doctor/ physician if you feel unwell.
Specific treatment (see supplemental first aid instructions on this label).
If skin irritation occurs: Get medical advice/ attention.
If eye irritation persists: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
In case of fire: Evacuate area. Fight fire remotely due to the risk of explosion.
Store in a well -ventilated place. Keep container tightly closed.
Store locked up.
Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC) or not covered by GHS - none
Section 3: Composition/Information on Ingredients
Ingredients as defined by 29 CFR 1910.1200:
Chemical Ingredients:
CAS Number:
Percent Range:
Trade Secret 1
-
60 — 80%
Trade Secret 2
-
20 — 30%
The specific chemical identity and/or exact percentage of the composition has been withheld as Trade
Secret in accordance with paragraph (i) of §1910.1200.
Section 4: First Aid Measures
Description of first aid measures:
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, give artificial respiration. Call a poison center or doctor/physician if you feel unwell.
Skin Contact: Wash with plenty of soap and water. Take off contaminated clothing and wash
before reuse. If skin irritation occurs: Get medical advice/attention.
Revision Date: 05/12/2015 Page 2 of 8

Safety Data Sheet
CBNTM Custom -Blend Nutrients
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: See sections 2 and/or 11.
Indication of any immediate medical attention and special treatment needed: No data available.
Section 5: Fire Fighting Measures
Suitable Extinguishing Media: Use water spray, alcohol -resistant foam, dry chemical or carbon dioxide.
Unsuitable Extinguishing Media: No known information.
Specific Hazards Arising from the chemical/substance: Oxidizer - Contact with combustible/organic
material may cause fire. May decompose upon heating to produce corrosive and/or toxic fumes. Keep
product and empty container away from heat and sources of ignition. Sealed containers may rupture
when heated. Sensitive to mechanical impact. In case of major fire and large quantities: Evacuate area.
Fight fire remotely due to the risk of explosion.
Hazardous Combustion Products: Nitrogen oxides, phosphorous oxides, ammonia.
Protective Equipment and Precautions for Fire -Fighters: As in any fire, wear self-contained breathing
apparatus and full protective gear.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Eliminate all ignition
sources and heat sources if safe to do so. Ensure adequate ventilation. Use personal protective
equipment. Avoid dust formation. Do not breathe dust/fume/gas/mist/vapors/spray.
Environmental Precautions: Do not flush to surface water. See section 12 for further environmental
data.
Methods for Containment/Cleaning Up: Collect spillage. Collected waste may be transferred to a
closed, preferably metal container and sent to a RCRA approved waste disposal facility. Alternatively,
pick up and place spill into noncombustible container and dissolve in large amount of water. Add soda
ash. Mix and neutralize with 6M-HCI. Neutralized sludge may be sent to an approved waste disposal
facility. Ventilate area and wash spill site after material pickup is complete.
Section 7: Handling and Storage
Precautions for Safe Handling: Avoid breathing dust. Use only outdoors or in a well -ventilated area.
Keep away from clothing and other combustible materials. Take any precaution to avoid mixing with
combustibles. Wash thoroughly after handling. Keep out of reach of children. Handle in accordance with
good industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities:
Revision Date: 05/12/2015 Page 3 of 8

Safety Data Sheet
CBNTM Custom -Blend Nutrients
Storage: Hygroscopic — Protect from moisture. Store in a tightly closed container, store in a cool,
dry, ventilated place. Store locked up and away from clothing and other combustible materials.
Store at temperatures not exceeding 130°F (54°C), preferably not exceeding 86°F (30°C).
Section 8: Exposure Controls/Personal Protection
Exposure Limits: There are no OSHA PEL's, NIOSH REL's, or ACGIH TLV's applicable to this material.
Engineering Controls: Ensure adequate ventilation, especially in confined areas. Ensure that eyewash
stations and safety showers are close to the workstation location.
Personal Protective Equipment:
Eye Protection: Wear appropriate eye protection/face protection.
Hand Protection: Wear appropriate protective gloves.
Skin and Body Protection: Wear appropriate protective clothing to prevent skin exposure.
Take off contaminated clothing and wash before reuse.
Respiratory Protection: Use only in a well -ventilated area. Avoid breathing dust. Wear
appropriate NIOSH approved respirator if exposure limits are exceeded or irritation occurs.
Hygiene Measures: Keep away from clothing and other combustible materials. Use only outdoors or in
a well -ventilated area. Wash thoroughly after handling. Handle in accordance with good industrial hygiene
and safety practice.
Section 9: Physical and Chemical Properties
Appearance/Physical State:
Color:
Odor:
Odor Threshold:
pH:
Melting/Freezing Point:
Initial Boiling Point:
Flash Point:
Evaporation Rate:
Flammability (solid, gas):
Lower Explosive Limit:
Upper Explosive Limit:
Vapor Pressure:
Vapor Density:
Relative Density:
Solubility:
Partition Coefficient:
Autoignition Temperature:
Decomposition Temperature:
Crystals, granules
White
Odorless
Not Available
7.0
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
1.73 @ 77°F (23°C)
118 g/100 g water @ 32°F (0°C)
Not Available
Not Available
Not Available
Section 10: Stability and Reactivity
Reactivity: No information available.
Revision Date: 05/12/2015 Page 4 of 8

Safety Data Sheet
CBNTM Custom -Blend Nutrients
Stability: Hygroscopic. Stable under recommended storage conditions.
Possibility of hazardous reactions: Oxidizer: Contact with combustible/organic material may
cause fire. Liberates ammonia in reaction with strong alkalis.
Conditions to Avoid: Heat, flame, ignition sources, dusting and incompatibles. Moisture and
combustible materials. Shock sensitive.
Incompatible Materials: Reducing agents, powdered metals, strong acids, strong oxidizing
agents, strong bases, aluminum, antimony, chromium, copper, iron, lead, magnesium,
manganese, nickel, zinc, brass, oil, charcoal, organic material, acetic acid, ammonium chloride,
bismuth, cadmium, chlorides, cobalt, phosphorus, potassium and ammonium sulfate, sodium,
sodium hypochlorite, sodium perchlorate, sodium -potassium alloy, and sulfides.
Hazardous Decomposition Products: Other decomposition products — No data available. In
case of fire: see section 5.
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Information on Likely Routes of Exposure:
Inhalation: May cause respiratory irritation if inhaled. At high temperatures, exposure to toxic
nitrogen oxides decomposition products can quickly cause acute respiratory
problems. Inhalation of large amounts causes systemic acidosis and abnormal
hemoglobin.
Ingestion: Large oral doses of nitrates may cause dizziness, abdominal pain, vomiting,
bloody diarrhea, weakness, convulsions, and collapse. May cause
methemoglobinemia resulting in cyanosis.
Skin Contact: Causes skin irritation.
Eye Contact: Causes eye irritation.
Toxicity Data:
Chemical Name
LD50 ORAL
LD50 DERMAL
LC50 INHALATION
Trade Secret 1
2217 mg/kg
No data
No data
Trade Secret 2
6500 mg/kg ( Rat)
7950 mg/kg ( Rabbit)
No data
Symptoms: No information available.
Delayed and Immediate Effects, Chronic Effects from Short and Long Term Exposure:
Sensitization:
Mutagenic Effects:
Reproductive Toxicity:
STOT — Single Exposure:
STOT — Repeated Exposure:
Aspiration Hazard:
Chronic Exposure:
Aggravation of Pre-existing Conditions
No information available.
No information available.
No information available.
Respiratory system.
No information available.
No information available.
Small repeated oral doses of nitrates may cause
weakness, depression, headache, and mental
impairment.
No information available.
Revision Date: 05/12/2015 Page 5 of 8

Safety Data Sheet
CBNTM Custom -Blend Nutrients
Carcinogenicity:
Component
CAS
NTP
IARC
OSHA
Trade Secret 1
N/A
Not listed
Not listed
Not listed
Trade Secret 2
N/A
Not listed
Not listed
Not listed
Additional Information: To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Section 12: Ecological Information
Ecotoxicity:
This product is safe for the environment at the concentrations predicted under normal use conditions.
Persistence and Degradability: When released into water, this material is expected to readily
biodegrade.
Bioaccumulative Potential: No information available.
Mobility in Soil: When released into soil, this material is expected to leach into groundwater. When
released into the soil, this material is not expected to evaporate significantly.
Other Adverse Effects: No information available.
Section 13: Disposal Considerations
Dispose of contents/container in accordance with all applicable local, state and federal regulations.
Section 14: Transport Information
For Transportation Emergencies Involving This Material, Call:
ChemTrec 1-800-424-9300 Company Code: E419
DOT (LAND):
Proper Shipping Name:
Hazard Class:
UN Number:
Packing Group:
Placards:
DOT Hazardous Substance RQ:
DOT Marine Pollutants:
AMMONIUM NITRATE BASED FERTILIZER
5.1
UN2067
Oxidizer
None/no reportable quantities
None/no reportable quantities
Section 15: Regulatory Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III,
Section 302.
Revision Date: 05/12/2015 Page 6 of 8

Safety Data Sheet
CBNTM Custom -Blend Nutrients
SARA 311/312 Hazard Categories:
Acute Health Hazard Yes
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard Yes
SARA 313: The Trade Secret 1 component is subject to reporting levels (>1.0%) established by SARA
Title III, Section 313. Additionally, water dissociable ammonia salts are subject to the reporting
requirements of SARA 313 when placed in water.
State Right -to -Know:
Component
Massachusetts
New Jersey
Pennsylvania
Illinois
Rhode Island
Trade Secret 1
X
X
X
X
X
TSCA: Not Applicable
California Prop. 65 Components: This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm.
Section 16: Other Information
NFPA Rating:
Health Hazard: 0
Fire: 0
Reactivity Hazard: 3
Other: Oxidizer
Legend:
ACGIH: American Conference of Governmental & Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSL/NDSL: Domestic Substances List/Non-Domestic Substances List
IARC: International Agency for the Research of Cancer
IATA: International Air Traffic Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organizations
NFPA: National Fire Protection Association Health, Flammability & Reactivity; Hazard Scale 0
=minimal/none 4= significant
NTP: National Toxicology Program
OSHA: Occupational Safety & Health Administration
PEL: Permissible Exposure Limits
RCRA: Resource Conservation & Recovery Act
RQ: Reportable Quantity
RTK: Right -To -Know
SARA: Superfund Amendments & Reauthorization Act
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value
TSCA: Toxic Substances Control Act
Revision Date: 05/12/2015 Page 7 of 8

Safety Data Sheet CBNTM Custom -Blend Nutrients
TWA: Time Weighted Average
TCLP: Toxicity Characteristic Leaching Procedure
VOC: Volatile Organic Compounds
Disclaimer: The information contained in this SIDS is presented in good faith and believed to be accurate
based on the information provided. The SIDS does not purport to be all inclusive, and shall be used only
as a guide. While ETEC, LLC believes that the data contained herein comply with 29 CFR 1910.1200,
they are not to be taken as a warranty or representation for which ETEC, LLC assumes legal
responsibility. ETEC, LLC shall not be held liable or accountable for any loss or damage associated with
the use of this material and information. The recommended industrial hygiene and safe use, handling,
storage, and disposal procedures are believed to be generally applicable. However, since the use,
handling, storage, and disposal are beyond ETEC, LLC control, it is the responsibility of the user both to
determine safe conditions for use of this product and to assume liability of loss, damage, or expense
arising out of the material's improper use.
Revision Date: 05/12/2015 Page 8 of 8