NCG030246_MONITORING INFO_20190628

STORMWATER DIVISION CODING SHEET
NCG PERMITS
PERMIT NO.
w �� LD a V�
DOC TYPE.
❑ HISTORICAL FILE
O'MONITORING REPORTS
DOC DATE
❑ a b o (p a- Zs
YYYYMMDD

Stormwater Discharge Monitoring Report
for North Carolina Division of Energy, Mineral and Land Resources General Permit No. NCG030000
Date submitted 6/28/2019
CERTIFICATE OF COVERAGE NO. NCG03 0 2 4 6
FACILITY NAME Hickory Manufacturing and Technology Center
COUNTY Catawba 004jw
PERSON COLLECTING SAMPLES Steve Street
LABORATORY Water Tech Labs
Lab Cert. # 50
Comments on sample collection or analysis:
Quarterly sample
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR 2019 - Quarter 2
SAMPLE PERIOD ❑ Jan -June ❑ July -Dec
or ❑ Monthly' (month)
DISCHARGING TO CLASS ❑ORW ❑HQW ❑Trout ❑PNA
❑Zero -flaw ❑Water Supply [:]SA
*Other C
PLEASE REMEMBER TO SIGN ON PAGES 2 AND/OR 3 4
n No discharge this periodj2
Outfall No.
Benchmarks
Date Sample
Collected'
(mo/dd/yr)
-
24-hour rainfall
amount,
Inches'
-
Total Suspended Solids
100 mg/L or 50 mg/0
pH,
Standard units
6.0 — 9.0
Total Copper
0.010 mg/L
Total Lead
0.075 mg/L
Total Zinc
0.126 mg/L
Non -Polar O&G/
Total Petroleum
Hydrocarbons
15 mg/L
Total Toxic
Organics'
1 mg/L
Parameter Code
-
46529
C0530
00400
01119
01051
01094
00552
78141
SDO 3
06/05/19
.4
19
6.88
.010 -
.002
.450
<5.6
N/A
SDO 5
06/05/19
.4
22
5.33
.016
.002
.128
<6.6
N/A
Monthly sampling (instead of semi-annual) must begin with the second consecutive oencnmdrK ext.eeuduLc lUl LlIC �01Ill� Pal alI­1. I
Z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
'The total precipitation must be recorded using data from an on -site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
' See General Permit, Section B, Table 1 to identify the especially sensitive receiving water classifications where the more protective benchmark applies.
' Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2018-05/31/2021 SWU-245, last revised 11/1/2018
Page-1of3

Facilities that incorporate a solvent management plan into the Stormwater Pollution Prevention Plan may so certify, and the requirement for TTO monitoring
may be waived. The solvent management plan shall include a list of the total toxic organic compounds used and the other elements listed in the General
Permit. For those facilities electing to employ the TTO monitoring waiver, the discharger shall sign the following certification statement:
"Based upon my inquiry of the person or persons directly responsible for managing compliance with the permit monitoring requirement for total toxic organics
(TTO), I certify that to the best of my knowledge and belief, no dumping of concentrated toxic organics into the stormwater or areas which are exposed to rainfall or
stormwater runoff has occurred since filing the last discharge monitoring report. I further certify that this facility is implementing the all the provisions of the
solvent management plan included in the Stormwater Pollution Prevention Plan."
N/A
Name (Print name)
N/A
Title (Print title)
Signature
Date
Note: Results must be reported in numerical format. Do not report Below Detection Limit, BDL, <PQL, Non -detect, ND, or other similar non -numerical
format. When results are below the applicable limits, they must be reported in the format, "<XX mg/L", where XX is the numerical value of the detection
limit, reporting limit, etc. in mg/L.
Note: if you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Part B: Vehicle Maintenance Area Monitoring Results: only for facilities averaging > 55 gal of new oil per month.
n No discharge this period?z
Outfall No.
Date Sample Collected'
(mo/dd/yr)
24-hour rainfall amount,
Inches3
New Motor Oil or
Hydraulic Oil Usage
Non -Polar O&G/ Total
Petroleum Hydrocarbons
Total Suspended
Solids
Benchmarks
-
-
-
15 mg/L
100 mg/L or 50 mg/L'
Parameter Code
-
46529
NCOIL
00552
CO530
Footnotes from Part A also apply to Part B
Note: if you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Permit Date: 11/1/2018-05/31/2021 SWU-245,last revised 11/1/2018
Page 2 of 3

FOR PART AND PART B MONITORING RESULTS:
• A BENCHMARK EXCEEDANCE TRIGGERS TIER 1 REQUIREMENTS. SEE PERMIT PART II SECTION B.
2 EXCEEDANCES IN A ROW FOR THE SAME PARAMETER AT THE SAME OUTFALL TRIGGER TIER 2 REQUIREMENTS. SEE PERMIT PART II SECTION B.
TIER 3: HAS YOUR FACILITY HAD 4 OR MORE BENCHMARK EXCEEDENCES FOR THE SAME PARAMETER AT ANYONE OUTFALL? YES E] NO [I
IF YES, HAVE YOU CONTACTED THE DEMLR REGIONAL OFFICE? YES E] NO ❑
REGIONAL OFFICE CONTACT NAME: James Moore
Mail an oriainal copv of this DMR, including all "No Discharge" reports within 30 days of receipt of the lab results (or at end of monitoring period in the
case of "No Discharge" reports) to:
Division of Water Quality
Attn: DWQ Central Files
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
YOU MUST SIGN THIS CERTIFICATION FOR ANY INFORMATION REPORTED:
"I certify, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to
assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or
those persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete. I
am aware that there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations."
Signature of Permittee
612312DI9
Date
Permit Date: 11/1/2018-05/31/2021 SW U-245, last revised 11/1/2018
Page 3 of 3

ujimirKCH LRES.lnc.
POST OFFICE BOX 1056 • N6 PINEWOOD PLAZA DR.
GRANITE FALLS, NORTH CAROLINA 28630
(828) 3964444
SAMPLE: Corning Optical (003)
COLLECTION DATE:
6/5/2019
PERMIT A,
COLLECTION TIME:
14:18
ADDRESS: Corning Optical
RECEIVED DATE:
6/6/2019
P.O. Box 489
RECEIVED TIME:
08:37
Hickory, NC 28603-04B9
REPORTED:
6120/2019
ANALYSIS
ANALY' SIS
_ .. .
RESULTS
_...
UNITS
DATE
ANALYST
1
Lead
0.002
mg/L
6/11/19
TSS
19.0
mg/L
6/7/19
Irg
Copper
0.010
mg/L
6/11/19
Zinc
0.460
mg/L
6/11/19
Oil & Grease
<5.6
mg1L
616119
Idg
LOG ID: 1906-105 REPORTED BY: NCrCFRTIFIFD LAB # 50
Tony Gragg, Lab Supervisor

wirmliMCH LRD.S.I.C.
POST OFFICE BOX 1066 - #5 PINEWOOD PLAZA DR.
GRANITE FALLS, NORTH CAROLINA 28680
[phone]
SAMPLE: Corning Optical (005) COLLECTION DATE: 6/512019
PERMIT* COLLECTION TIME., 14:09
ADDRESS: Corning Optical RECEIVED DATE: 6/6/2019
P.O. Box 489 RECEIVED TIME., 08:37
Hickory, NC 28603-0489
REPORTED: 612012019
.......
ANALYSIS
RESULTS
UNITS
DATE
ANALYST.:.
Lead
0.002
mg/L
6/12119
TsS
22,0
mg/L
6/7/19
Irg
Copper
0.016
mg/L
6/12119
Zinc
0.128
mgA
6112119
Oil & Grease
<5.6
mg/L
6/6116
jdg
LOG ID: 1906-106 MORTED BY: NC CERTHZIED LAB # 50
Tony Gregg, Lab Supervisor

RESEARCh ANALYTICAL Report of Analysis
E i °
t' Gi + LA ORAT®ROES, LNC• 6/14/2019
For: Water Tech Labs, Inc. v %,%... """
P.O. Box 1056 1:QHq�
Granite Falls, NC 28630 ` `� o
$ t� NC834
., NC1137701
Attn: Joe Gragg ++. '._e,_ _o,
Client Sample ID:
Site:
Corning Disc 003
Water Tech Labs
Lab Sample ID: 67731.01
Collection Date: 615/2019
14:18
aM ete
Method
Result
Units
Rep Limit Analyst Analysis
Date[Tlme
Copper, Total
EPA 200.8
0.010
mg/L
0.001 JF
6/11/2019
Lead, Total
EPA 200.8
0.002
mg/L
0.001 JF
6/1112019
Zinc, Total
EPA 200.8.
0,450
mg1L
0.01 JF
6/1112019
NA = not analyzed
i
I
P.0 Box 473 106 Shon Slreet Kemersvillo, North Carolina 27284 Tel: [phone] Fax [phone] vnvw.randalaba.com Page 1
rd coa besic_vld

i
RESEARCh ANALyiricAL Report of Analysis
LA ORATOR6ES,'NCe 6/14/2019
. 1{{tU1111>1j
For: Water Tech Labs, Inc. ;J•`�Gj,&�
P.O. Box 1056 �� ' +:
Granite Falls, NC 28630 ;t NC1134 Z�
1 NC £ '•
Attn: Joe Gragg _ r
.Client Sample ID:
Corning Dlsc 005
Lab Sample ID:
67731.02
'`Site:
Water Tech Labs
Collection Date:
6/6/2019
14:09
Paramate
Method
Result
llnits
Rep Limi An I st Analysis DateRlme
Copper, Total
EPA 200.8
0.016
mg/L
0.001
JF
6/12/2019
'Lead, Total
EPA 200.8
0,002
mg/L
0.001
JF
6/12/2019
Zinc, Total
EPA 200.8
0.128
mg/L
0.01
JF
6/1212019
NA = not analyzed
P,6. Box 473 106 Short Street Kernersvllle, North Carolina 27284 Tel: [phone] Fax: [phone] vrvr jandalabs.conl Page 1
rat coa basic_v Id

t /r l r 1 F it //"" ppY���,' i r' � / gO�r�j - 1BS I c
5 Pinewood Plaza Drive — P.O. Box 1056
I Granite Falls, NC 28630
Phone [phone] — Fax [phone]
CLIENT: Corning Cable Systems-TC Pit
c/o Steve Street
P.O Box 489
Hickory, NC 28603-0489
PHONE NUMBER: 828-327-5000
TYPE SAMPLE: Stormwater
No. LOCATIONS: 2
SAMPLER NAME:
Sample Collection
Information
TYPE
CONTAINERS
ANALYSIS REQUIRED
Sample Location
FacilityName
DATE
TIME
TEMP. °C
Grabl
Com osite
No.
Plastic/
Glass
Discharge 003
��5�/q
/
�5�,1 Y
Grab
3
Plastic/
Glass
TSS, Oil & Gr., Lead, Copper, Zinc
Discharge 005
Grab
3
Plastic/
Glass
TSS, Oil & Gr., Lead, Copper, Zinc
I
i
'Rel qu ied By:
Date:
fn/61/?
Time:
V"37
Re B
Date
Time:
0�37
Reli quished By:
Date:
Time:
eceived B
Date:
Time:
PRES ATION:
ool °
LLHM
04
[j Na
NO3
(,] Dechlornating Agent
[] Other
SAMPLE TEMP. @ LAB (°C)�4
Chlorine Residual mg/I
NC CERTIFIED LAB # 50

N"®E
Stormwater Discharge Outfall (SDO)
Qualitative Monitoring Report
Forguidance on filling out this form, please visit: http//portal ncdenr org/web/wa/ws/su/nodessw#tab-4
Permit No.: N/C/ 0/ 3/0/0/0/0/0/ or Certificate of Coverage No.: N/C/G/ 0 / 3 / 0 / 2 / 4 / 6 /
Facility Name: Hickory Manufacturing and Technology Center - Corning Optical Communications
County: Catawba Phone No.: 828-901-6695
Inspector: Steve Street
Date of Inspection: 06/05/2019
Time of Inspection: 14:22
Total Event Precipitation (inches):.4"
-......................................... .... .. ... __.--- -----
All permits require qualitative monitoring to be performed during a "measurable storm event."
A "measurable storm event" is a storm event that results in an actual discharge from the
permitted site outfall. The previous measurable storm event must have been at least 72 hours
prior. The 72-hour storm interval does not apply if the permittee is able to document that a shorter
interval is representative for local storm events during the sampling period, and the permittee
obtains approval from the local DWQ Regional Office.
By this signature, I certify that this report is accurate and complete to the best of my knowledge:
(Signature of Permittee or Designee)
© 2019 Corning Incorporated. All Rights Reserved.
Page 1 of 2
SWU-242, Last modified 10/25/2012
i

1. Outfall Description:
Outfall No. 001 Structure (pipe, ditch, etc.) Pine
Receiving Stream: Clark's Creek
Describe the industrial activities that occur within the outfall drainage area: Reel storage, solid
waste containers designated for landfill, hazardous waste storage. and R&D building
2. Color: Describe the color of the discharge using basic colors (red, brown, blue, etc.) and tint
(light, medium, dark) as descriptors: Color was clear.
3. Odor: Describe any distinct odors that the discharge may have (i.e., smells strongly of oil,
weak chlorine odor, etc.): No odor was present.
4. Clarity: Choose the number which best describes the clarity of the discharge, where 1 is
clear and 5 is very cloudy:
01 2 3 4 5
S. Floating Solids: Choose the number which best describes the amount of floating solids in
the stormwater discharge, where 1 is no solids and 5 is the surface covered with Floating solids:
01 2 3 4 5
6. Suspended Solids: Choose the number which best describes the amount of suspended
solids in the stormwater discharge, where 1 is no solids and 5 is extremely muddy:
01 2 3 4 5
7. Is there any foam in the stormwater discharge? Yes No
8. Is there an oil sheen in the stormwater discharge? Yes No
9. Is there evidence of erosion or deposition at the outfall? Yes No
10. Other Obvious Indicators of Stormwater Pollution: None
List and describe: SDO #1 is represented by SDO 43.
Note: Low clarity, high solids, and/or the presence of foam, oil sheen, or erosion/deposition
may be indicative of pollutant exposure. These conditions warrant further investigation.
© 2019 Corning Incorporated. All Rights Reserved.

ANT
NC®EE R
Stormwater Discharge Outfall (SDO)
Qualitative Monitoring Report
For guidance on filling out this form, please visit: htto //uortal.ncdennorg/web/wq/ws/su/npdessw#tab-4
Permit No.: N/C/ 0/ 3/0/0/0/0/0/ or Certificate of Coverage No.:
Facility Name: Hickory Manufacturing and Technology Center - Corning Optical Communications
County: Catawba Phone No.: 828-901-6695
Inspector: Steve Street
Date of Inspection: 6/05/2019
Time of Inspection: 14:20
Total Event Precipitation (inches):.4"
All permits require qualitative monitoring to be performed during a "measurable storm event."
A "measurable storm event" is a storm event that results in an actual discharge from the
permitted site outfall. The previous measurable storm event must have been at least 72 hours
prior. The 72-hour storm interval does not apply if the permittee is able to document that a shorter
interval is representative for local storm events during the sampling period, and the permittee
obtains approval from the local DWQ Regional Office.
By this sig ature, I certify that this report is accurate and complete to the best of my knowledge:
(Signature of Permittee or Designee)
© 2019 Corning Incorporated. All Rights Reserved.
Page 1 of 2
SWU-242, Last modified 10/25/2012

1. Outfall Description: .
Outfall No. 002 Structure (pipe, ditch, etc.) Pipe
Receiving Stream: Clark's Creek
Describe the industrial activities that occur within the outfall drainage area: Solid waste containers
designated for landfill metal recycling container, and chemical storage area (coveredl.
2. Color: Describe the color of the discharge using basic colors (red, brown, blue, etc.) and tint
(light, medium, dark) as descriptors: Color was clear.
3. Odor: Describe any distinct odors that the discharge may have (i.e., smells strongly of oil,
weak chlorine odor, etc.): No odor was present.
4. Clarity: Choose the number which best describes the clarity of the discharge, where 1 is
clear and 5 is very cloudy:
Ql 2 3 4 5
S. Floating Solids: Choose the number which best describes the amount of floating solids in
the stormwater discharge, where 1 is no solids and 5 is the surface covered with floating solids:
�1 2 3 4 5
6. Suspended Solids: Choose the number which best describes the amount of suspended
solids in the stormwater discharge, where 1 is no solids and 5 is extremely muddy:
Q 2 3 4 5
7. Is there any foam in the stormwater discharge? Yes No
8. Is there an oil sheen in the stormwater discharge? Yes No
9. Is there evidence of erosion or deposition at the outfall? Yes No
10. Other Obvious Indicators of Stormwater Pollution: None
List and describe: SDO #2 is represented by SDO U.
Note: Low clarity, high solids, and/or the presence of foam, oil sheen, or erosion/deposition
may be indicative of pollutant exposure. These conditions warrant further investigation.
© 2019 Corning Incorporated. All Rights Reserved.

R"®EEROR
Stormwater Discharge Outfall (SDO)
Qualitative Monitoring Report
For guidance on filling out th isform, please visit.- httR//nortalncdenrorg/web/w /su/nodessw#tab-4
Permit No.: N/C/ 0/ 3/0/0/0/0/0/ or Certificate of Coverage No.:
Facility Name: Hickory Manufacturing and Technology Center - Corning Optical Communications
County: Catawba Phone No.: 828-901-6695
Inspector: Steve Street
Date of Inspection: 6/05/2019
Time of Inspection: 14:18
Total Event Precipitation (inches):.4"
All permits require qualitative monitoring to be performed during a "measurable storm event"
A "measurable storm event' is a storm event that results in an actual discharge from the
permitted site outfall. The previous measurable storm event must have been at least 72 hours
prior. The 72-hour storm interval does not apply if the permittee is able to document that a shorter
interval is representative for local storm events during the sampling period, and the permittee
obtains approval from the local DWQ Regional Office.
By this signature, 1 certify that this report is accurate and complete to the best of my knowledge:
(Signature of Permittee or Designee)
© 2019 Corning Incorporated. All Rights Reserved.
Page 1 of 2
SWU-242, Last modified 10/25/2012

1. Outfall Description:
Outfall No. 003 Structure (pipe, ditch, etc.) Pine
Receiving Stream: Clark's Creek
Describe the industrial activities that occur within the outfall drainage area: Reel storage, machine
shop, and warehouse.
2. Color: Describe the color of the discharge using basic colors (red, brown, blue, etc.) and tint
(light, medium, dark) as descriptors: Color was clear.
3. Odor: Describe any distinct odors that the discharge may have (i.e., smells strongly of oil,
weak chlorine odor, etc.): No odor was present.
4. Clarity: Choose the number which best describes the clarity of the discharge, where 1 is
clear and 5 is very cloudy:
01 2 3 4 5
5. Floating Solids: Choose the number which best describes the amount of Floating solids in
the stormwater discharge, where 1 is no solids and 5 is the surface covered with floating solids:
Q1 2 3 4 5
6. Suspended Solids: Choose the number which best describes the amount of suspended
solids in the stormwater discharge, where 1 is no solids and 5 is extremely muddy:
1 P2 3 4 5
7. Is there any foam in the stormwater discharge? Yes No
B. Is there an oil sheen in the stormwater discharge? Yes No
9. Is there evidence of erosion or deposition at the outfall? Yes No
10. Other Obvious Indicators of Stormwater Pollution: None
List and describe:
Note: Low clarity, high solids, and/or the presence of foam, oil sheen, or erosion/deposition
may be indicative of pollutant exposure. These conditions warrant further investigation.
© 2019 Corning Incorporated. All Rights Reserved.

400
AWWA
KCDEE R
Stormwater Discharge Outfall (SDO)
Qualitative Monitoring Report
For guidance on filling out thisform, please visit: http�/portal.ncdpnr.ori!/­web/wq/ws/su/npdessw#tab-4
Permit No.: N/C/ 0/ 3/0/0/0/0/0/ or Certificate of Coverage No.:
Facility Name: Hickory Manufacturing and Technolog-y Center - Corning Optical Communications
County: Catawba Phone No.: 828-901-6695
Inspector: Steve Street
Date of Inspection: 6/05/2019
Time of Inspection: 14:09
Total Event Precipitation (inches):.4"
All permits require qualitative monitoring to be performed during a "measurable storm event."
A "measurable storm event" is a storm event that results in an actual discharge from the
permitted site outfall. The previous measurable storm event must have been at least 72 hours
prior. The 72-hour storm interval does not apply if the permittee is able to document that a shorter
interval is representative for local storm events during the sampling period, and the permittee
obtains approval from the local DWQ Regional Office.
By this signature, 1 certify that this report is accurate and complete to the best of my knowledge:
(Signature of Permittee or Designee)
© 2019 Corning Incorporated. All Rights Reserved.
Pagel of 2
SWU-242, Last modified 10/25/2012

1. Outfall Description:
Outfall No. 005 Structure (pipe, ditch, etc.) Pipe
Receiving Stream: Clark's Creek
Describe the industrial activities that occur within the outfall drainage area: Manufacture of fiber
optic cable and warehouse.
2. Color: Describe the color of the discharge using basic colors (red, brown, blue, etc.) and tint
(light, medium, dark) as descriptors: Color was clear.
3. Odor: Describe any distinct odors that the discharge may have (i.e., smells strongly of oil,
weak chlorine odor, etc.): No odor was present.
4. Clarity: Choose the number which best describes the clarity of the discharge, where 1 is
clear and 5 is very cloudy:
Q 2 3 4 5
S. Floating Solids: Choose the number which best describes the amount of Floating solids in
the stormwater discharge, where 1 is no solids and 5 is the surface covered with Floating solids:
1 Q 3 4 5
6. Suspended Solids: Choose the number which best describes the amount of suspended
solids in the stormwater discharge, where 1 is no solids and 5 is extremely muddy:
1 0 3 4 5
7. Is there any foam in the stormwater discharge? Yes No
B. Is there an oil sheen in the stormwater discharge? Yes No
9. Is there evidence of erosion or deposition at the outfall? Yes No
i
10. Other Obvious Indicators of Stormwater Pollution: None
List and describe:
Note: Low clarity, high solids, and/or the presence of foam, oil sheen, or erosion/deposition
may be indicative of pollutant exposure. These conditions warrant further investigation.
© 2019 Corning Incorporated. All Rights Reserved.

I
CORNING
June 28g', '2019
Ahmed Kollakh Hickory Manufacturing and t 828-901-5699
Plant Manager Technology Center f 828-901-5665
PO Box 489 [e-mail]
Hickory, NC 28603 w .corning.com
RECEIVED
North Carolina Department of Environmental Quality
Division of Energy, Mineral, and Land Resources JUL 0 6 2019
Attn: DWQ Central Files CENTRAL FILES
1617 Mail Service Center DWR SECTION!
Raleigh, North Carolina 27699-1617
Dear Sir/Madam:
Please find enclosed an original and one (1) copy of the Stormwater Discharge Monitoring
Report for Corning Optical Communications, LLC — Hickory Manufacturing and Technology
Center (HMTC) located in Hickory, Catawba County, North Carolina. The stormwater
samples were collected on 6/05/2019 for the permitted outfalls and represent the quarterly
sample as specified in the requirements set forth by NCDEQ for HMTC.
The results reflect HMTC to be outside the benchmark value for the following:
• Zinc at SDO #3
• Copper, pH, and Zinc at SDO #5
Additional attachments include the Laboratory Analytical Report, Chain -of -Custody, Rainfall
Record, and Qualitative Monitoring Report. Please contact Steve Street if you have any
questions regarding this submittal at 828-901-6695.
Sincerely,
6C ✓
Ahmed Koilakh
Plant Manager
cc: Kim Kelley
Steve Street
d
© 2019 Corning Incorporated. All Rights Reserved.