NCG030039_MONITORING INFO_20190612

STORMWATER DIVISION CODING SHEET
NCG PERMITS
PERMIT NO.
��� o-30U3 1
DOC TYPE
❑ HISTORICAL FILE
[, MONITORING REPORTS
DOC DATE
❑ o
YYYYM M D D

---Sxik4v
E
July 9, 2019
Ms. Lindsey Speed Nichols
Daimler Trucks of ;Forth America, LLC
11550 Statesville Boulevard
Cleveland, NC 27013
Subject: Monthly Sampling — June 2019
NPDES General Permit No. NCG030000/CoC No. NCG030039
Daimler Trucks of North America, LLC
11550 Statesville Boulevard, Cleveland, North Carolina
Shield Project No.1140111-06
Dear Ms. Nichols:
Shield Engineering, Inc. (Shield) was unable to collect stormwater samples at the Cleveland facility for the
month of June 2019 at Stormwater Discharge Outfall (SDO) 4001 and #002. According to rainfall data collected
for the month, six rainfall events occurred on June 5'", June 7'n, June 12'", June 10', June 22nd, and June 24t',
producing 0.13 inches, 1.86 inches, 1.76 inches, 2.02 inches, 0.21 inches, and 0.83 inches, respectively.
However, each of these events took place after normal business hours, within 72 hours of the last qualifying
storm event, or did not produce enough rainfall to collect a sample. Shield will continue to monitor daily
weather conditions and attempt to continue coordination of appropriate staff and resources to facilitate adequate
sample collection. A partially completed DMR form is attached to this cover letter for your signature and
submittal to the State.
Daimler's Cleveland facility remains in Tier Three of the NPDES General Permit No. NCG030000 at SDO #001
and SDO #002 for Copper. The facility is also Tier Three for "Zinc at SDO #002. The person designated to act
as the permittee by Daimler Trucks — Cleveland Facility should complete all "Red" sections of the attached
Stormwater Discharge Monitoring Report (DMR). The completed DMR form should then be mailed to the
regulatory agency Central Files. Shield greatly appreciates the opportunity to provide environmental services to
Daimler Trucks of North America. If you have any questions in reference to this document or require further
information, please feel free to contact either of the undersigned at [phone].
Respectfully,
SHIELD ENGINEERING, INC.
B an . Huggm-1
Staff. Engineer 2
AMclda Greene
Senior Engineer
ATTACHMENTS
Ro er411 P.
Chief Executive Officer, President
4301 Taggart Creek Road Telephone [phone]
Charlotte, NC 28208 w .shieldengineering.corn Fax 704.394,6968

Semi-annual Stormwater Discharge Monitoring Report
for North Carolina Division of Water Quality General Permit No. NCG030000
Date submitted 7/9/19
CERTIFICATE OF COVERAGE NO. NCG030039
FACILITY NAME Daimler Trucks North America LLC—Cleveland, NC
PERSON COLLECTING SAMPLES
LABORATORY:N/A p NA_
Comments on sample collection or analysis: No qualifying storm events
and/or after normal business hours
Part A: Stormwater Benchmarks and Monitoring Results
SAMPLE COLLECTION YEAR 2019
SAMPLE PERIOD ❑ Jan -June ® July -Dec
or ® Monthly' June
DISCHARGING TO CLASS ❑ORW ❑HCtW ❑Trout ❑PNA
❑Zero -flow ❑Water Supply ❑SA
®Other
PLEASE REMEMBER TO SIGN ON PAGES 2 AND/OR 3 -i
E(No discharge this period?2
Outfall No.
Date Sample
Collected'
(mo/dd/yr)
24-hour rainfall
amount,
Inches'
Total Suspended Solids
pH,
Standard units
Copper
Lead
Zinc
Non -Polar O&G/
Total Petroleum
Hydrocarbons
Total Toxic
Organics'
g
Benchmarks
100 mg/L or 50 mg/L
6.0— 9.0
0.010 mg/L
0.075 mg/L
0.126 mg/L
15 mg/L
1 mg/L
SDO #001
SDO #002
' Monthly sampling (instead of semi-annual) must begin with the second consecutive benchmark exceedance for the same parameter at Me sane unudn.
z For sampling periods with no discharge at any single outfall, you must still submit this discharge monitoring report with a checkmark here.
'The total precipitation must be recorded using data from an on -site rain gauge. Unattended sites may be eligible for a waiver of the rain gauge requirement.
" See General Permit, Table 3 identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
s Total Toxic Organics sampling is applicable only for those facilities which perform metal finishing operations, manufacture semiconductors, manufacture
electronic crystals, or manufacture cathode ray tubes. For purposes of this permit the definition of Total Toxic Organics is that definition contained in the EPA
Effluent Guidelines for the facility subject to the requirement to sample (for metal finishing use the definition as found in 40 CFR 433.11; for semiconductor
manufacture use the definition as found in 40 CFR 469.12; for electronic crystal manufacture use the definition as found in 40 CFR 469.22; and for cathode ray
tube manufacture use the definition found in 40 CFR 469.31).
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 1 of 3

Facilities that incorporate a solvent management plan into the Stormwater Pollution Prevention Plan may so certify, and the requirement for TTO monitoring
may be waived. The solvent management plan shall include a list of the total toxic organic compounds used and the other elements listed in the General
Permit. For those facilities electing to employ the TTO monitoring waiver, the discharger shall sign the following certification statement:
"Based upon my inquiry of the person or persons directly responsible for managing compliance with the permit monitoring requirement for total toxic organics
(TTO), I certify that to the best of my knowledge and belief, no dumping of concentrated toxic organics into the stormwater or areas which are exposed to rainfall or
stormwater runoff has occurred since filing the last discharge monitoring report. I further certify that this facility is implementing the all the provisions of the
solvent management plan included in the Stormwater Pollution Prevention Plan."
�riK ��Ch�o+n
Name (Print nname))
) w 1r�zi
Title (Print title)
7/«l�
(Signatur (Date)
Note: Results must be reported in numerical format. Do not report Below Detection Limit, BDL, <PQL, Non -detect, ND, or other similar non -numerical
format. When results are below the applicable limits, they must be reported in the format, "<XX mg/L", where XX is the numerical value of the detection
limit, reporting limit, etc. in mg/L.
Note: If you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 2, or Tier 3 responses. See General Permit text.
Part B: Vehicle Maintenance Area Monitoring Results: only for facilities averaging > 55 gal of new oil per month.
ONo discharge this period?2
Outfall No.
Date Sample
i
Collected
(mo/dd/yr)
24-hour rainfall
. amount,
Inches
Non -polar O&G/TPH by
EPA 1664 (SGT-HEM)
Total Suspended Solids
pH
Benchmarks =__>
-
-
15 mg/L
100 mg/L or 50 mg/L`
6.0 — 9.0 SU
Footnotes from Part A also apply to this Part B
' See General Permit text, Table 5, identifying the especially sensitive receiving water classifications where the more protective benchmark applies.
Permit Date: 11/1/2012-10/31/2017 SWU-245, last revised 10/25/2012
Page 2 of 3

Note: If you report a sample value in excess of the benchmark, you must implement Tier 1, Tier 1, or Tier 3 responses. See General Permit text.
FOR PART AAND PART B MONITORING RESULTS:
• A BENCHMARK EXCEEDANCE TRIGGERS TIER 1 REQUIREMENTS. SEE PERMIT PART II SECTION B.
• 2 EXCEEDANCES IN A ROW FOR THE SAME PARAMETER AT THE SAME OUTFALL TRIGGER TIER 2 REQUIREMENTS. SEE PERMIT PART II,�S,ECCTION B.
• TIER 3: HAS YOUR FACILITY HAD 4 OR MORE BENCHMARK EXCEEDENCES FOR THE SAME PARAMETER AT ANYONE OUTFALL? YES U NO ❑
IF YES, HAVE YOU CONTACTS❑T-THE DWQ REGIONAL OFFICE? YES 2O ❑
REGIONAL OFFICE CONTACT NAME: MVY)e:�-T/i E-2P� o
Mail an original and one copy of this DMR including all "No Discharge" reports within 30 days of receipt of the lab results for at end of monitoring period
in the case of "No Discharge" reports) It
Division of Water Quality
Attn: DWQ Central Files
1617 Mail Service Center
Raleigh, North Carolina 27699-1617
YOU MUST SIGN THIS CERTIFICATION FOR ANY. INFORMATION REPORTED:
"I certify, under penalty of law, that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to
assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or
those persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete., I
am aware that there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations."
(Signature'of Permittee)
Permit Date: 11/1/2012-10/31/2017
- 14114
(Date)
SWU-245, last revised 10/25/2012
Page 3 of 3

DAIMLER
July 16, 2019
Lindsey Nichols
Sr. Environmental Engineer
Daimler Trucks
11550 Statesville Blvd
Cleveland, NC 27013
704.645.5353 Phone
REGEIvFn
Division of Water Quality JUIy ?(i19
Attn: Central Files
1617 Mail Service Center QPNTRAL rILc:
Raleigh, North Carolina 27699-1617 UOTI N
To whom it may concern:
Shield Engineering, Inc. (Shield) was unable to collect storm water samples for Storm water
Discharge Outfalls (SDO) 001 and 002 at the Daimler Cleveland facility for the month of June.
Per Section 2 Part IV of General Permit No. NCG030000 Shield will attempt to perform a
substitute sample or a visual assessment during the next qualifying storm event. The original and
one signed copy of the Discharge Monitoring Report for November are enclosed.
Included with the November 2018 Discharge Monitoring Report Cleveland facility provide re -
notification under the NPDES General Permit No. NCG030000, effective November 1, 2018 that
the facility remains in Tier Three for SDO 001 and SDO 002. Daimler Trucks Cleveland facility is
awaiting notification from the Division of Water Quality as to what changes will occur when
entering into Tier Three of the NPDES General Permit.
Should you have any questions, please contact me at 704-645-5353 or
[e-mail].
Sincerely,
Daimler Trucks, LLC
Lindsey Speed Nichols
Sr. Environmental Engineer
Enclosures