Loading...
HomeMy WebLinkAboutNCG200468_Inspection_20200127 SrA7[a ROY COOPER Governor MICHAEL S.REGAN ,. secretary S.DANIEL SMITH NORTH CAROLINA Director Environmental Quality January 27, 2020 Horton Iron & Metal Company Attn:John Horton 2216 Hwy 421 North Wilmington, NC 28402 Subject: Compliance Evaluation Inspection NPDES General Stormwater Permit NCG200000 Certificate of Coverage NCG200468 Horton Iron & Metal Hwy 421N New Hanover County Dear Mr. Horton: On January 23, 2020, Brian Lambe from the Wilmington Regional Office of the Division of Energy, Mineral, and Land Resources (DEMLR), conducted a compliance evaluation inspection for Horton Iron & Metal located in New Hanover County, North Carolina. The following observations were noted during the DEMLR inspection (please see the attached addendum for additional information about your permit): 1)Stormwater Pollution Prevention Plan (SPPP) A Stormwater Pollution Prevention Plan (SPPP) has been developed, recorded, and properly implemented. Yes ■ No ❑ 2)Qualitative Monitoring Qualitative monitoring has been conducted and recorded in accordance with permit requirements. Yes ■ No❑ 3)Analytical Monitoring Analytical monitoring has been conducted and recorded in accordance with permit requirements. Yes ■ No❑ Thank you for your assistance and cooperation during this inspection. Please be advised that violations of the NPDES Stormwater General Permit may be subject to a civil penalty assessment of up to $25,000.00 per day for each violation. If you have any questions, comments, or need assistance with understanding any aspect of your permit, please do not hesitate to contact Daniel Sams or me at (910)796-7215 or Brian.Lambe@ncdenr.gov Sincerel , W an Lambe nvironmental Specialist Land Quality Section D_E Q�� North Carolina Department of Environmental Quality I Division of Energy.Mineral and Land Resources Wilmington Regional Office 1 127 Cardinal Drive Extension I Wilmington,North Carolina 28405 910.796.7215 ramH cwouun NCG200468 Horton Iron&Metal Page 2 of 2 Attachments: 1. BIMS Inspection Checklist cc: WiROFiles—Land Quality Central Files—Laserfiche John Horton (hortonironmetal@bellsouth.net) Compliance Inspection Report Permit: NCG200468 Effective: 08/01/19 Expiration: 05/31/24 Owner: Horton Iron&Metal Company SOC: Effective: Expiration: Facility: Horton Iron &Metal Company-Hwy 421 N County: New Hanover 2216 Hwy 421 N Region: Wilmington Wilmington INC 28402 Contact Person: John J Horton Title: President Phone: 910-763-8268 Directions to Facility: System Classifications: Primary ORC: Certification: Phone: Secondary ORC(s): On-Site Representative(s): Related Permits: Inspection Date: 01/23/2020 Entry e: 01:OOPM Exit Time: 02:OOPM Primary Inspector: Brian P Lambe Phone: Secondary Inspector(s): Reason for Inspection: Routine Inspection Type: Compliance Evaluation Permit Inspection Type: Wholesale Trade of Metal Waste and Scrap Stormwater Discharge COC Facility Status: Compliant ❑ Not Compliant Question Areas: Storm Water (See attachment summary) Page 1 of 3 Permit: NCG200468 Owner-Facility:Horton Iron&Metal Company Inspection Date: 01/23/2020 Inspection Type:Compliance Evaluation Reason for Visit: Routine Inspection Summary: THe facilty was inspected on 1/23/2020 by Brian Lambe. Met with owner and discussed permitting requirements. The SPPP was revised this year by IEC, Industrial Environmental Consultants, LLC. The SPPP was very well prepared and thorough.The inspector urged the owner to read and know the$PPP. Training of employees is needed,ensure to document training sessions(safety meetings). The site did need some clean up of containers. Containers must be labeled with contents. Prevent rain water from trash cans by having holes in botttoms. Soil is very sandy and infiltrates very quickly. The sampling point is in the front. Road contaminants may be affecting sampling results.We discussed if the sampling point should be moved to represent the back of the porperty better, but the general gradient does flow to the front corner. Page 2 of 3 permit: NCG200468 Owner-Facility:Horton Iron&Metal Company Inspection Date: 01/23/2020 Inspection Type:Compliance Evaluation Reason for Visit: Routine Stormwater Pollution Prevention Plan Yes No NA NE Does the site have a Stormwater Pollution Prevention Plan? 0 ❑ ❑ ❑ #Does the Plan include a General Location(USGS)map? 0 ❑ ❑ ❑ #Does the Plan include a"Narrative Description of Practices"? 0 ❑ ❑ ❑ #Does the Plan include a detailed site map including outfall locations and drainage areas? 0 ❑ ❑ ❑ #Does the Plan include a list of significant spills occurring during the past 3 years? 0 ❑ ❑ ❑ #Has the facility evaluated feasible alternatives to current practices? 0 ❑ ❑ ❑ #Does the facility provide all necessary secondary containment? 0 ❑ ❑ ❑ #Does the Plan include a BMP summary? E ❑ ❑ ❑ #Does the Plan include a Spill Prevention and Response Plan(SPRP)? 0 ❑ ❑ ❑ #Does the Plan include a Preventative Maintenance and Good Housekeeping Plan? 0 ❑ ❑ ❑ #Does the facility provide and document Employee Training? 0 ❑ ❑ ❑ #Does the Plan include a list of Responsible Party(s)? 0 ❑ ❑ ❑ #Is the Plan reviewed and updated annually? 0 ❑ ❑ ❑ #Does the Plan include a Stormwater Facility Inspection Program? 0 ❑ ❑ ❑ Has the Stormwater Pollution Prevention Plan been implemented? 0 ❑ ❑ ❑ Comment: Qualitative Monitoring Yes No NA NE Has the facility conducted its Qualitative Monitoring semi-annually? 0 ❑ ❑ ❑ Comment: Analytical Monitoring Yes No NA NE Has the facility conducted its Analytical monitoring? N ❑ ❑ ❑ #Has the facility conducted its Analytical monitoring from Vehicle Maintenance areas? 0 ❑ ❑ ❑ Comment: Permit and Outfalls Yes No NA NE #Is a copy of the Permit and the Certificate of Coverage available at the site? 0 ❑ ❑ ❑ #Were all oulfalls observed during the inspection? 0 ❑ ❑ ❑ #If the facility has representative outfall status,is it properly documented by the Division? ❑ ❑ ❑ #Has the facility evaluated all illicit(non stormwater)discharges? 0 ❑ ❑ ❑ Comment: Page 3 of 3