2019.10_CCO.p8.A_Inventory of GenX Compounds

Chemours Company - Fayetteville Works Oct-19
Air Permit No. 03735T45
Month Notes Status
GenX Compound
Emissions
(lbs)
October 6-31, 2018 1 Actual 0.1
November 2018 Actual 58.1
December 2018 2 Actual 69.7
January 2019 Actual 10.9
February 2019 Actual 31.7
March 2019 Actual 46.7
April 2019 Actual 9.7
May 2019 Actual 10.3
June 2019 Actual 11.9
July 2019 Actual 3.1
August 2019 Actual 4.3
September 2019 Actual 3.6
October 1-5, 2019 3 Projected 0.1
260.3
2,302.7
88.70%
Notes:
1) Contains emissions from October 6, 2018 - October 31, 2018
2) Contains summation of emissions from December 1 - 30, 2018 and December 31, 2018
3) Contains emissions from October 1, 2019 - October 5, 2019
Assumptions:
4) Unless otherwise noted, emissions are calculated using average stack test data
from relevant stack testing.
3) [For March only] Emission rate for when the ABR only was operating was
determined by subtracting the 230 kg/hr ABR on and ABR off runs from the
February 2019 stack testing. Stack testing following the permeator tie-in (March
2019) was not utilized for determining ABR only emissions since those specific
conditions were not tested independently. Therefore, emissions rates after the
permeator was tied in to the scrubber were calculated using the following control
efficiencies: 99.1% for Division Scrubber (obtained from acid fluoride testing
conducted by Entec Services in 2013), 45% for Secondary Scrubber (most
conservative efficiency from the Dec 2018 stack testing), and 95.1% for Carbon
Bed (from March 2019 stack testing).
1) Emission rates for PPVE campaign runs determined using the following for the
Feb/March campaign: 52.4% operating time ABR is on, 2.7% burnout, and 44.9%
ABR is off. And the following for Dec 20-30, 2018 PPVE Campaign: 38.2%
operating time ABR is on, 2.1% burnout, and 59.7% ABR is off.
2) Carbon bed became operational on VE-South process and equipment emissions
on June 29, 2019. Emissions from July stack testing data were utilized for the
period after installation.
2017 Baseline Emissions
Percent Reduction
Table 1
Inventory of Emissions of GenX Compounds
(Per Consent Order, Paragraph 8a)
October-19
Total GenX Compound Emissions
(12-Month Period from October 6, 2018
through October 5, 2019)
Chemours Company - Fayetteville Works Oct-19
Air Permit No. 03735T45
Month Notes Status
GenX Compound
Emissions
(lbs)
December 31, 2018 1 Actual 0.3
January 2019 Actual 10.9
February 2019 Actual 31.7
March 2019 Actual 46.7
April 2019 Actual 9.7
May 2019 Actual 10.3
June 2019 Actual 11.9
July 2019 Actual 3.1
August 2019 Actual 4.3
September 2019 Actual 3.6
October 2019 Projected 0.3
November 2019 Projected 8.3
December 1-30, 2019 2 Projected 3.2
144.4
2,302.7
93.73%
Notes:
1) Contains emissions from December 31, 2018 only
2) Contains emissions from December 1, 2019 - December 30, 2019
Assumptions:
4) Unless otherwise noted, emissions are calculated using average stack test data from
relevant stack testing.
Table 2
Inventory of Emissions of GenX Compounds
(Per Consent Order, Paragraph 8b)
October-19
3) [For March only] Emission rate for when the ABR only was operating was
determined by subtracting the 230 kg/hr ABR on and ABR off runs from the February
2019 stack testing. Stack testing following the permeator tie-in (March 2019) was not
utilized for determining ABR only emissions since those specific conditions were not
tested independently. Therefore, emissions rates after the permeator was tied in to the
scrubber were calculated using the following control efficiencies: 99.1% for Division
Scrubber (obtained from acid fluoride testing conducted by Entec Services in 2013), 45%
for Secondary Scrubber (most conservative efficiency from the Dec 2018 stack testing),
and 95.1% for Carbon Bed (from March 2019 stack testing).
1) Emission rates for PPVE campaign runs determined using the following for the
Feb/March campaign: 52.4% operating time ABR is on, 2.7% burnout, and 44.9% ABR
is off. And the following for Dec 20-30, 2018 PPVE Campaign: 38.2% operating time
ABR is on, 2.1% burnout, and 59.7% ABR is off.
2) Carbon bed became operational on VE-South process and equipment emissions on
June 29, 2019. Emissions from July stack testing data were utilized for the period after
installation.
Total GenX Compound Emissions
(12-Month Period from December 31, 2018
through December 30, 2019)
2017 Baseline Emissions
Percent Reduction