NCS01068_INSP_20220725

NORTH CARnLINAD_E Q��
o.n.mm.m m c.wmmm�n.i a.i�
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
UNIT TYPE:
Lined
LCID
YW
Transfer
Compost
SLAS
COUNTY: Fors th
Y
MSWLF
PER MIT NO.: NCS-01068
Closed
HHW
White
Incin
UP
FIRM
X
MSWLF
goods
FILE TYPE: COMPLIANCE
CDLF
TireT&Pi
Tire
Industrial
DEMO
SDTF
Collection
Monolill
Landfill
Date of Site Inspection: 07/25/2022
FACILITY NAME AND ADDRESS:
Mr. Tim Gardner
Piedmont Disposal
4420 Providence Lane
Winston Salem, NC27106
GPS COORDINATES: N: NA
Date of Last Inspection:
FACILITY CONTACT INFORMATION:
Name: Tim Gardner
Address: Same as above
Telephone: [phone]
Email address: [e-mail]
PARTICIPANTS: Chester Cobb and driver
STATUS OF PERMIT: Active
PURPOSE OF SITE VISIT:
E: NA
EXPIRES: 1213112022
New Vehicle
STATUS OF PAST NOTED VIOLATIONS:
NA
OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance
with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violationof the Solid Waste Laws, Regulations, Conditions of a Permit
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to
enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and
any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
Page 1 of 2

Oepartmenl o� Envimnmental0uali�
ADDITIONAL COMMENTS
1) Pumpervehicle(s) inspected:
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
TRUCK
LICENSE PLATE #
VIN #
TANK CAPACITY (gal)
21
RB-6815
1FVACXD21PH UG 1347
2) The required information of Firm name, town name, phone #, and permit # was on both sides of the
pumper vehicle. Each letter of the required information was at least three (3) inches in height. The
permit number was in yellow lettering with black edging. The black edging did not show up well against
the black color of the toolboxes. Without the edging, the letters for the permit numberwould be slightly
less than 3 inches in height. In the future, be sure that at least 3 inches of the letter is distinguishable
from the background color of what it is placed on. See pictures below.
3) The tank is made of steel and affixed to the frame of the truck as per 15A NCAC 13B .0835(a)(1).
4) The valves appeared to be in working order and closed as per 15A NCAC 13B .0835(a)(2). Caps present
on ports.
5) Access ports were closed and properly sealed as per 15A NCAC 13B .0835(a)(3).
6) No leaks noticed as per 15A NCAC 13B .0835(a).
9
[]/$F70SALy a�s_yy�_sses t I!
MC$ti47G6B ��. �r! C�IE�MpN
J I W9
Driver side of pumpervehicle.
Passengerside of pumper vehicle.
Please contact me if you have any questions or concerns regarding this inspection report.
Digitally signed by Chester Cobb
DIN: Chester Cobb, o=NC DEQ, ou=Division of
Waste
Management,
�;gemail=[e-mail], c=US
axi. Date: 2022.08.1917:18:03-04'00' Phone: [phone]
Chester R. Cobb, Environmental Program Consultant
Division of Waste Management, NCDEQ
Regional Representative
Sent on: X Email Hand delivery US Mail Certified No. L_1
Page 2 of 2