HomeMy WebLinkAboutRA-5227_3327_CA_HRE_20210526_Determinations
May 26, 2021
TO: Mark Petermann NC UST Section RE: Health Risk Evaluation
Incident # 3327
Kittany, Inc. Well Sampling Results 3121 NC Highway 86 North Hillsborough, NC
During this sampling event, three contaminants were detected in the well water. The standards used to
determine if the water is suitable for drinking and cooking are the United States Environmental Protection Agency’s Maximum Contaminant Levels (MCLs) or, if no MCLs exist, North Carolina Groundwater Standards (2L).
If any contaminant concentrations exceed applicable standards for using the water for drinking and cooking,
those contaminant concentrations are further analyzed to determine if the water is suitable for other household uses, such as showering, bathing, washing dishes, flushing toilets, and hand washing. The chart below compares the detected contaminant concentrations with the applicable standards: Sample ID Contaminant Concentration (µg/L) MCL (µg/L) 2L (µg/L)
98541 Bromodichloromethane 1.34 80*
Chlorodibromomethane 0.615 80*
Chloroform 4.23 80*
µg/L – Micrograms of contaminant per liter of water, roughly equivalent to parts per billion.
* As total trihalomethanes.
RECOMMENDATION: None of the contaminants detected exceed the applicable water standards. Therefore, no restrictions on the use of this water are recommended at this time.
Although none of the contaminant levels exceed the applicable regulatory values, the levels of
bromodichloromethane and chlorodibromomethane in this well exceed the values recommended by the North
Carolina Department of Health and Human Services (DHHS) of the 0.6 µg/L and 0.5 µg/L, respectively. The well user may want to contact the Private Well and Health program at (919) 707- 5900 for more information.
David Lilley, Environmental Toxicologist Division of Waste Management, NCDEQ
May 26, 2021
TO: Mark Petermann
NC UST Section RE: Health Risk Evaluation Incident # 3327
Steven Bledsoe Well Sampling Results
117 Phelps Road Hillsborough, NC During this sampling event, one contaminant was detected in the well water. The standards used to
determine if the water is suitable for drinking and cooking are the United States Environmental Protection
Agency’s Maximum Contaminant Levels (MCLs) or, if no MCLs exist, North Carolina Groundwater Standards (2L). If the contaminant concentration exceeds the applicable standard for using the water for drinking and
cooking, the contaminant concentration is further analyzed to determine if the water is suitable for other
household uses, such as showering, bathing, washing dishes, flushing toilets, and hand washing. The chart below compares the detected contaminant concentration with the applicable standard: Sample ID Contaminant Concentration (µg/L) MCL (µg/L) 2L (µg/L)
98546 Chloroform 0.782 80*
µg/L – Stands for micrograms of contaminant per liter of water and is roughly equivalent to parts per billion. * As total trihalomethanes. RECOMMENDATION: The detected contaminant did not exceed the applicable water standard. Therefore, no
restrictions on the use of this water are recommended at this time.
David Lilley, Environmental Toxicologist
Division of Waste Management, NCDEQ
May 26, 2021
TO: Mark Petermann
NC UST Section RE: Health Risk Evaluation Incident # 3327
Laverne James Well Sampling Results
3105 NC Highway 86 North Hillsborough, NC During this sampling event, one contaminant was detected in the well water. The standards used to
determine if the water is suitable for drinking and cooking are the United States Environmental Protection
Agency’s Maximum Contaminant Levels (MCLs) or, if no MCLs exist, North Carolina Groundwater Standards (2L). If the contaminant concentration exceeds the applicable standard for using the water for drinking and
cooking, the contaminant concentration is further analyzed to determine if the water is suitable for other
household uses, such as showering, bathing, washing dishes, flushing toilets, and hand washing. The chart below compares the detected contaminant concentration with the applicable standard: Sample ID Contaminant Concentration (µg/L) MCL (µg/L) 2L (µg/L)
98542 Chloroform 1.97 80*
µg/L – Stands for micrograms of contaminant per liter of water and is roughly equivalent to parts per billion. * As total trihalomethanes. RECOMMENDATION: The detected contaminant did not exceed the applicable water standard. Therefore, no
restrictions on the use of this water are recommended at this time.
David Lilley, Environmental Toxicologist
Division of Waste Management, NCDEQ
May 26, 2021 TO: Mark Petermann
NC UST Section
RE: Health Risk Evaluation Incident # 3327 Jeannine Whitfield Well Sampling Results
3118 NC Highway 86 North
Hillsborough, NC During this sampling event, one contaminant was detected in the well water. The standards used to determine if the water is suitable for drinking and cooking are the United States Environmental Protection
Agency’s Maximum Contaminant Levels (MCLs) or, if no MCLs exist, North Carolina Groundwater Standards
(2L). If the contaminant concentration exceeds the applicable standard for using the water for drinking and cooking, the contaminant concentration is further analyzed to determine if the water is suitable for other
household uses, such as showering, bathing, washing dishes, flushing toilets, and hand washing. The chart
below compares the detected contaminant concentration with the applicable standard: Sample ID Contaminant Concentration (µg/L) MCL (µg/L) 2L (µg/L)
98543 Chloroform 0.601 80*
µg/L – Stands for micrograms of contaminant per liter of water and is roughly equivalent to parts per billion.
* As total trihalomethanes. RECOMMENDATION: The detected contaminant did not exceed the applicable water standard. Therefore, no restrictions on the use of this water are recommended at this time.
David Lilley, Environmental Toxicologist Division of Waste Management, NCDEQ
May 26, 2021
TO: Mark Petermann
NC UST Section RE: Health Risk Evaluation Incident # 3327
Robert & Alesha Bates Well Sampling Results
118 Phelps Road Hillsborough, NC During this sampling event, one contaminant was detected in the well water. The standards used to
determine if the water is suitable for drinking and cooking are the United States Environmental Protection
Agency’s Maximum Contaminant Levels (MCLs) or, if no MCLs exist, North Carolina Groundwater Standards (2L). If the contaminant concentration exceeds the applicable standard for using the water for drinking and
cooking, the contaminant concentration is further analyzed to determine if the water is suitable for other
household uses, such as showering, bathing, washing dishes, flushing toilets, and hand washing. The chart below compares the detected contaminant concentration with the applicable standard: Sample ID Contaminant Concentration (µg/L) MCL (µg/L) 2L (µg/L)
98545 Chloroform 1.47 80*
µg/L – Stands for micrograms of contaminant per liter of water and is roughly equivalent to parts per billion. * As total trihalomethanes. RECOMMENDATION: The detected contaminant did not exceed the applicable water standard. Therefore, no
restrictions on the use of this water are recommended at this time.
David Lilley, Environmental Toxicologist
Division of Waste Management, NCDEQ