NCS01610_INSP_20230127

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2
UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Wake
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01610
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 1/27/2023 Date of Last Inspection: 1/23/2023
FACILITY NAME AND ADDRESS:
Meridian Waste 103 Rupert Rd. Raleigh NC 27603 GPS COORDINATES: N: ° W: ° FACILITY CONTACT NAME AND PHONE NUMBER:
Name: Cole Crozier Telephone: [phone]
Email address: [e-mail] FACILITY CONTACT ADDRESS:
Same as above
PARTICIPANTS: Jeffrey Bullard NCDWM, Cole Crozier (MW)
STATUS OF PERMIT: Active
PURPOSE OF SITE VISIT: Inspection of new truck added to permit STATUS OF PAST NOTED VIOLATIONS: N/A
OBSERVED VIOLATIONS:
None

The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2
ADDITIONAL COMMENTS
Truck# /LICENSE PLATE # VIN # TANK CAPACITY (gal)
651 / RD-1251 1FDUF5HTXLDA01001 800 WASTE / 350 WATER

(1) All required lettering indicating firm name, town name, phone number, and septage management firm
permit number was permanently attached to each side of the truck, was plainly visible and met height
requirements.
(2) The tank of the vehicle was constructed of metal and appeared to be structurally sound.
(3) The tank of the vehicle was affixed to the truck frame with bolts.
(4) The septage drain valve appeared to be in working order. No septage leaks were observed.
(5) All port covers and caps where in place and appeared to be in proper working order.
(6) Truck pump logs were inspected, required information was being recorded.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] . Jeffrey Bullard, Environmental Program Consultant Division of Waste Management, NCDEQ Regional Representative
Sent on: 1/27/2023

Email X Hand delivery US Mail Certified No. [ _]