NCS01616_2022Permit_Initial

2022
Permit and Registration
Lathe & Son Septic Co.

is hereby issued a Septage Management Firm Permit,
Permit Number NCS-01616
and registered as a Septage Management Firm
(PUMPER)
in the State of North Carolina.

This permit to operate a Septage Management Firm is issued to the above named person, business or entity alone and is not transferable to any other person, business or entity. Firm operation shall be in accordance with the provisions of N.C. General Statute 130A-291.1 - 130A-291.3, Title 15A of the N.C. Administrative Code 13B .0800 et.seq., conditions of the permit, and representations made in the application and accompanying documents for a permit. The permit holder is authorized to discharge septage only at the locations(s) listed below: 1. Rocky River Regional Wastewater Treatment Plant, Concord NC
This permit does not entitle the permit holder to operate a Septage Land Application Site, a Septage Detention or Treatment Facility, or any other solid waste management facility not specified herein. Failure to operate as permitted may result in the Department suspending or revoking this permit, initiating action to enjoin the unpermitted operation, imposing administrative penalties, or invoking any other remedy as provided in Chapter 130A, Article 1, part 2 of the North Carolina General Statutes. This permit and registration expires on December 31, 2022. ______________________________________________ Perry Sugg, Environmental Compliance Branch Head
Pd $ 550.00
02/01/2022
Ck# 1053

February 1, 2022

Mr. Lathe IV
Lathe & Son Septic Co.
706 Red Cedar Lane
Monroe, NC 28110

Re: New Firm – Assignment of Permit Number (NCS#)
Lathe & Son Septic Co. NCS-01616

Dear Mr. Lathe IV:

We have received an Application for Permit to Operate a Septage Management Firm and a permit fee
payment in the amount of $550. When the Permit to Operate a Septage Management Firm is issued, the
Firm Permit Number will be NCS-01616. Section .0844 of the Septage Management Rules provides the
requirements for lettering your vehicle(s).

However, your Application for Permit to Operate a Septage Management Firm will not be
processed until you have submitted at least one disposal authorization, attended a New Operator
Class offered by the Division, and the vehicle(s) has been inspected for compliance with the rules
and approved by the Division. The required vehicle lettering must be no less than 3 inches in height and must show the firm name, town name, phone number, and permit number, NCS-01616. This
lettering must be shown on both sides of your vehicle(s) and must be permanently attached to the
vehicle(s). When the required lettering has been completed, please contact me at 919-707-8283 or email
at [e-mail] to request a truck inspection.

This letter shall not be considered as a permit to operate a Septage Management Firm. Please note that you may not legally operate a septage management firm in North Carolina without a permit.
General Statutes, GS 130A-291.1 (c) states in part “A septage management firm that commences
operation without first having obtained a permit shall cease to operate until the firm obtains a permit
under this section.” You are hereby advised that, pursuant to N.C.G.S. 130A-22, an administrative
penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Statute or
Regulations. If you have any questions, feel free to contact me at 919-707-8283.

Sincerely,

Chester R. Cobb, Environmental Program Consultant
Division of Waste Management, NCDEQ

Digitally signed by Chester R. Cobb
DN: cn=Chester R. Cobb, o=Solid Waste
Section, ou=DWM,
email=[e-mail], c=US
Date: 2022.02.01 11:42:01 -05'00'