NCS00803_INSP_20210813

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined
MSWLF LCID YW Transfer Compost SLAS COUNTY: Harnett
Closed
MSWLF HHW White
goods Incin T&P FIRM X PERMIT NO.: NCS-00803
CDLF Tire T&P /
Collection Tire
Monofill Industrial
Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 8/13/2021 Date of Last Inspection: 5/14/2015

FACILITY NAME AND ADDRESS:
Precision Septic Pumping
554 Homestead Lane
Angier, NC 27501

FACILITY CONTACT NAME AND PHONE NUMBER:
Name: Ricky Holland
Telephone: [phone]
Email address: [e-mail]
Fax: N/A

FACILITY CONTACT ADDRESS:
Same as above

PARTICIPANTS:
Connie Wylie & Ricky Holland

STATUS OF PERMIT:
Active – permit expires December 31, 2021

PURPOSE OF SITE VISIT:
Routine

STATUS OF PAST NOTED VIOLATIONS:
N/A

OBSERVED VIOLATIONS:
N/A

SEE BACK OF PAGE

The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance
with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit,
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to
enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any
such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2

ADDITIONAL COMMENTS
1. Inspected vehicle tag#YA50912, VIN# correct per the firm application.
The tank appears structurally sound & securely attached. Outlet covers were on and no drips/leaks were noted.
The lettering is correct on both sides of this vehicle per info on the firm application – however the town name
“Angier” is displayed on a slant & on the tank curve, which makes it appear that the required 3 inches in height
is borderline.
2. Reviewed the truck pumping log & discussed the required information to be maintained – begin showing
separate gallons for each pumping event (some lines show only a total amount for two pump jobs combined)
and also record the town name for each pumping event.
3. Mr. Holland stated that he had already attended a 2021 continuing education class.
4. Thank you for your time.

Please contact me if you have any questions or concerns regarding this inspection report.

_ Phone: [phone]

Connie S. Wylie
Regional Representative

Sent on: Email Hand delivery X US Mail Certified No. [ _]