NCS01576_INSP_20210610

FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section

Page 1 of 3

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Alamance
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01576
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 06/10/2021 Date of Last Inspection: .
FACILITY NAME AND ADDRESS: Mr. Aaron Smeltz Quality Service Today
831 S. Eighth Street
Mebane, NC 27302
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Aaron Smeltz Address: Same as above Telephone: [phone], 336-694-3085 (cell)
Email address: [e-mail]

PARTICIPANTS: Chester Cobb (DWM) and Aaron STATUS OF PERMIT: Pending EXPIRES: ------------
PURPOSE OF SITE VISIT: Pre-operational
STATUS OF PAST NOTED VIOLATIONS: NA

OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to
enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section

Page 2 of 3

ADDITIONAL COMMENTS
1) Pumper vehicle(s) inspected:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
YA162092 2NPRLN9X48M760905 4,200

2) The required information of Firm name, town name, phone #, and permit # was on both sides of the
pumper vehicle. Each letter of the Firm name and permit # was greater than three (3) inches in height.
The letters for the town name and phone # were slightly less than 3 inches in height. Aaron had the
letters for the town name and phone # enlarged by the end of the day. See pictures below. All lettering
now 3 inches or greater in height. The lettering was distinguishable and not blocked from view. The
lettering meets the requirements of Rule 15A NCAC 13B .0835(b).
3) The tank is made of metal. The tank is affixed to the frame of the truck as per Rule 15A NCAC 13B
.0835(a)(1).
4) The valves appeared to be in working order and closed as per Rule 15A NCAC 13B .0835(a)(2). Caps
present on ports.
5) Access ports were closed and properly sealed as per Rule 15A NCAC 13B .0835(a)(3).
6) No leaks noticed as per Rule 15A NCAC 13B .0835(a).
7) The pump truck complies with the Septage Rules. Permit was issued on 06/11/2021.

Driver side of pump truck. Passenger side of pump truck.
FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section

Page 3 of 3

Picture emailed on 6/10/21 showing the town name
lettering enlarged to 3 inches or greater.
Picture emailed on 6/10/21 showing the phone
number lettering enlarged to 3 inches or greater.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] . Chester R. Cobb, Environmental Program Consultant Division of Waste Management, NCDEQ Regional Representative
Sent on: X Email Hand delivery US Mail Certified No. [ _]